Where is skype setting will be found in phone

I cant find my setting in my phone
Ill trying to turn off the contact syc in my phone book and im going too add my friends manually

T007A
T683S
T685T
T030K

Similar Messages

Hi all, my first time on. I shared my imovie project to Media Browser. Fine. Then after it downloaded it 'disappeared.' Where did it go? Having found it, how do I then share it with idvd? I am told the image quality will be much better this route.

Hi all, my first time on. I shared my imovie project to Media Browser. Fine. Then after it downloaded it 'disappeared.' Where did it go? Having found it, how do I then share it with idvd? I am told the image quality will be much better this route.

Hi
I do
• In iMovie - select a project
• Share to Media Browser and as Large (not HD or other res.)
• Close iMovie
• Open iDVD and select to start a New iDVD Project
• Import movie - from Media button - down to the right - and here from Movies
Yours Bengt W

My iPhone 4s no longer has sound for any of the applications but it does have sound for phone functions. Where is the setting for app sound? I have gone to the multitask screen and the volume bar is empty.

I recently found my phone outside in light rain (it had been there about 20 minutes). It had some glitches at first, however after letting it rest overnight it seemed to mostly recover. The one problem I am having is that I no longer have sound for any of my applications. I do have sound for phone fuctions, and I am able to use the speaker for phone functions.
When I am in my applications, including music/videos, the only way I can hear is if I use my earbuds. I am able to make a video and it will record sound just fine.
When I go to the multitask screen, the volume bar is empty and I cannot adjust it using the side buttons (even though in settings I have that feature activated). I completely reset all of my settings tonight and that did not make a difference.
Is there a setting I am missing, or am I just SOL? I am trying to avoid having to get a whole new phone but it is very frustrating to not have sound with my applications.

Hi Baileyfour,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
There are two places where vibrations can be set.
One is the Settings > Sounds
The other area is Settings > Notifications
If you have an app set to Alert, it may have a vibration set for it.
iOS: Understanding Notifications
http://support.apple.com/kb/ht3576
Information about Notifications settings can also be found in the iPhone User Guide (pages 131, 132)
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
I hope this information helps ....
Have a great day!
- Judy

My Skype number will expire, and it doesn't let me...

Hi,
I got a notification that my Skype number will expire in 2 days because my credit card has expired, and that no further charges will occur. I updated my credit card information and then looked for a place to renew it. In my account where it shows me my phone number there is a "settings" button, but when I click on it, it just refreshes the page. There is another button to "Get another Skpe Number" but that only lets me get a new number. I want to renew my current number subscription because I don't want to lose that number, but there is no place to renew it, unless the "settings" button is the place, but that doesn't work. I thought it might be a browser or network issue, so I tried from FireFox and Chrome from two different networks and the button still just refreshes. So, I looked for a support email to email for support and don't see one.
Can any one help in directing me where I can renew my skype number before it expires?
thanks
-Long Time Skype Customer

just open the link pasted below to see the instructions on how to get in touch with customer service -
https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES

TS3376 How do I find the menue where I can select the list of previous phones I have had and my new one ? at the moment it is still set to an old one so everytime I try to set it up it tells me it it's the wrong one - gggrrrrr help please

How do I find the menue where I can select the list of previous phones I have had and my new one ? at the moment it is still set to an old one so everytime I try to set it up it tells me it it's the wrong one - gggrrrrr help please

iPods (except for iPod touch) are not linked to any iTunes "account." They are associated with your iTunes library. The account in iTunes is your Apple ID, and that is used to buy and download content from the iTunes Store. It is not required to use an iPod.
The 1st (and 2nd) gen shuffle can only be used with one iTunes library at a time. When you connect it, iTunes should prompt you to start using it with your iTunes library, and warn that the shuffle's existing content will be erased. Have iTunes erase the shuffle, and it will be associated with your iTunes library going forward. You can then add content to your shuffle.
The need for the previous owner's Apple ID and password should only come up if you are trying to transfer existing content from the shuffle to your iTunes library, AND the previous owner had content purchased from the iTunes Store. Just cancel out of that step, if iTunes asks.

Missing Functionality -where do I set a budget for a Project?

Budgeting for Projects is non - existent
Budget for Profit and Loss for a particular project , How is it done ?
Does not work , No facility to put in Budget for a project ?
The report I am trying to run is:
REPORTS>FINANCIAL>BUDGET REPORTS>Profit and Loss Statement Budget Report.Then go to Expanded and choose a PROJECT, say MailOrder.
The result is that it will show the MailOrder project for the ACTUAL but it will show the whole company Turnover against the BUDGET column.
This is because there is no place to set a budget for MailOrder Project in the first place. So the question is where do I set a budget for a Project?
1 Budget setup screen - this has no facility to setup a budget for a PROJECT
2.Budget Profit and Loss - this has the facility to run a PROJECT budget but the figures for the Budget cannot be right because they were not setup in the first place.
PS MailOrder project is just an example.
Version: SAP BUSINESS ONE 2007 A Patch Level 41
Description of requirements: As above
(Valid as of: (Date that this legal requirement is applicable) N/A
Business needs: Customer cannot set the budget for a project and this effects their accounting.
Examples: (Please describe a typical example, how the functionality should work.)
Current Workaround: None.
Proposed solution: Create a Project and then be able to set a Budget for it
Edited by: Darpal Thiarha on May 14, 2008 10:34 AM

Hi Darpal/Kerstin
Please ignore my previous replies because I have now worked out why this idea will not work:
Kerstins' idea is based on setting up new Nominal Codes for every Project and for Every Nominal Code in the Profit and Loss structure. Apart from the fact that this will create a messy Nominal Structure with hundreds of Nominal Codes, the main issue here is the way the Cost Of Goods Sold is structured. The logic of our Nominal Structure for Sales and Cost of Goods is based on Item/Item Groups and the Nature of these Items. In our case we sell Skin Care products under 3 Brands. Say Brand A, B and C
So Brand A is summarised into one item Group and the ITEM GROUP is coded to Sales Nominal 20000 and the Cost of this group is coded to Nominal 30000. In Kertins suggestion, I would need to raise a Nominal Code 20001 for say Project Mail Order and 30001 for the Cost of Goods for Mail Order but this the Mail Order project is selling ALL our brands (A,B,C) - so you can see the problem here. You cannot use Nominal Codes for two different purposes and make it work. So the problem here is that my BRAND A summary will contain a Nominal with a Project Mail Order, that has SALES of Brand A,B,C. The Net effect will be that we will not be able to summarise anything in SALES and Cost of SALES in a logical way (Neither by Brand or By Project) and the Nominal Structure will be a mess.
My conclusion is that SAP b1 Sales and Cost of Goods section demands certain logic when building the Nominal Codes, and this is based on the NATURE OF THE STOCK ITEM and trying to superimpose the PROJECT issue into this, will never work. In my view, the PROJECT issue needs to be sorted without involving New Nominal codes and the starting point would be in sorting out the SALES and COST of SALES and the project Budget for this.
Please let me know if you need further illustration of the problem.

Where do I set up rules for conflict resolution when syncing iTunes with Outlook?

I just got an iPhone 5 and I'm coming from a Blackberry. I've been syncing Outlook Calendar and Contacts to a portable device for over 10 years, even back in the day of the pocket pc and more recently the Blackberry. My iPhone 5 syncs great and seemlessly with Outlook using iTunes. I've had no issues as of yet. The problem for me is, it just seems "too" easy. I didn't see anywhere where I could set rules for conflict resolutions. For example, if your pc says one thing but your iPhone says another, who wins and supercedes the other? What if by accident your iPhone loses all of its data, then iTunes syncs with your pc - will it delete all the Outlook data on your pc because it thinks it's syncing with updated data from your iPhone? (in my case data I've had for over 10 years)
With the Blackberry software it asked you to set up rules for conflict resolution when first connecting the phone (including an option to ask you first). In my case, I chose to have it ask me whenever it discovered a conflict. So whenever I synced, it specifically alerted me exactly how many items are being synced, and then if there were any conflicts, it'd stop and then ask me which device I want to supercede the other. This gave me a lot of piece of mind. Now after getting my iPhone and using iTunes to sync, it's been great so far but I have to say that I don't have as much piece of mind. Does anyone have any feedback on how to set up conflict resolution with iTunes and Outlook or does it not exist at all? Again, what would happen if there was a conflict between the two devices?

Yes! Thankyou for that. I had of course put the context.xml file in the web-inf directory.
I followed your example to the letter and it still wouldn't work. Or rather, I followed to the letter expect for the difference between "WEB" and "META".
Once I worked that out, it started working like a dream.
Note to anyone else who has a similar problem, make sure you REALLY look at the answer given. Make sure you REALLY do have all the files in the suggested places. It will save you time.
Thanks again.

Where do I set the polling frequency for Technical monitoring in Solution Manager 7.1 SP10 ??

Hi All,
I am customizing my technical monitoring templates and would like to know :
1. Where we can set the polling frequency for each metrics for triggering alerts through Technical monitoring in Solution Manager 7.1 SP10 ??
2. Is it like each time our threshold is breached, it will send an alert irrespective of polling frequency ??
I know the data collection interval time for each metrics in technical monitoring template but the as per my observation the polling frequency is different.
Need your guidance.
Regards,
Manish K

Hi Javier,
Refer to the documentation 'MAI Alert Consumer BAdI Interface' under
http://wiki.scn.sap.com/wiki/display/TechOps/Alert+Consumer+BAdI+Interface link for information on the input to the BAdI.
Kind regards,
Roland

Where is the setting in LR 2.0 to turn on the view the embedded jpg file instead of rendering a thum

Where is the setting in LR 2.0 to turn on the view the embedded jpg file instead of rendering a thumbnail image from the RAW file?

Doug, this is a user to user forum so you get advice here from other users just like yourself.
AFAIK LR will show the embedded jpeg until it renders its own preview after that there is no way to get it to show the embedded jpeg.
When you are importing photos into LR in the import dialog box there is an option to show a preview of the embedded jpeg while the import is actually taking place.
Also this is the regular LR user to user forum and there is a link to the LR 2.0 Beta forum at the top of this forum. Maybe its best to post your question there.

Where can i set the location of the LogonTicket cookies in the visual admin

hello:
where can i set the location of the LogonTicket cookies in the visual administrator?
thanks!!

Hi,
When the SAP LOGON ticket Expired or if we need to update the dates, it is generally done at the Visual Administration Level. SAP Logon Ticket is represented as cookie in the Browser which will help us for SSO.
In Visual Admin under keystore admin where our Old Portal certificate exists.
We will need to delete the old portal certificate, then we need to generate new ceritificate and a pop box will appear.. where we need to provide our System details like SID, Client. After these details are given we can get a new certificate in which validity period dates are automatically generated. And also we can import teh same into Portal at Sys Admin->sys config->key store admin for it to be available as .PSE or .DER file for SSO.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/59bba290-0201-0010-468b-cd12efda573a
check the above for EP security guide which might help you in the same.
Regards,
Ravi

If I restart my MBP to factory setting, will it impact the OS?

I have upgraded my OS to OS X Mountain Lion.
If I am planning to set my macbook pro to factory setting, will it impact the OS?
I am planning to sell my macbook pro. Bought it in early 2011.
Thanks in advance for the advice.

Found this.
Lion and Mountain Lion (if pre-installed on the computer at purchase*)
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because
                   it is three times faster than wireless.
          1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
              Utilities window appears.
          2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
          3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
              on the Erase tab in the DU main window.
          4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
              and set the Zero Data option to one-pass.
          5. Click on the Erase button and wait until the process has completed.
          6. Quit DU and return to the Mac OS X Utilities window.
          7. Select Reinstall Lion/Mountain Lion and click on the Install button.
          8. Upon completion shutdown the computer.

Where can I set the window dimensions for the "Java Applet window"?

Hi,
When I run a form on the web, the Java Applet is loaded and the form appear in the window. But "base window" have gived dimensions indifferent what dimensions has the window of the form which I run.
So, where can I set the dimensions of the "core window" which is behind the MDI window of the application?
Thanks in advance,
Eugen

Eugen,
in formsweb.cfg you will find parameters "width" and "height". You can set absolute values in pixels or "relative" in percent.
width=800
height=600
or
width=100%
height=100%
Gerald Krieger

Where should I set up my FTP server if I have no money to spend? I would prefer if someone answers this quickly as I want this site up and running soon.

Where should I set up my FTP server if I have no money to spend? I would prefer if someone answers this quickly as I want this site up and running soon.

Ethmoid is right... There ARE free web hosts, but... as the old saying goes "You get what you pay for" and if you pay nothing?
Most free web hosts are riddled with ads, and some are even hosts to malware. DO YOUR RESEARCH before committing to anything.
While some ISP's do provide free hosting, there are limitations with many of them, such as monthly bandwidth and file storage. You may not be able to get your whole site upto the server (depending on how big it is), or it may be down several days a month due to "excessive" traffic. Again - DO YOUR RESEARCH before committing to anything.
There are also a lot of services that run in the range of $4-7 a month for feature filled, bandwidth enabled hosting. Dreamhost is offering two domains for $3.95 a month right now. I use ICDSoft (have since 2003) and they're $7 a month, but they offer a lot for that.
Lastly, you want to look at SUPPORT. If your site goes down, and your "free" host is nowhere to be found.... It's as bad as having no site at all, if you cant get it fixed and no one can access your URL for days on end.

Where i can set the path to retreive the Km files

Hello All,
How to access the KM content files in my portal Application. Where I can set the path to retrieve any file from KM. Please can any one help me.
Thanks in Advance

hi
I am using the Following code. it gives error.i think i need to import some jar file. can you help which jar file to import and where i can find those jar files.
Thanks in Advance.
import com.sapportals.portal.prt.component.*;
import com.sapportals.portal.prt.resource.IResource;
import com.sapportals.portal.prt.resource.IResource.*;
import com.sapportals.portal.security.*;
import com.sapportals.portal.security.usermanagement.*;
public class test extends AbstractPortalComponent
    public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
          //IUser user = WPUMFactory.getUserFactory().getEP5User(request.getUser());
          com.sapportals.portal.security.usermanagement.IUser user = null ;
          IResource resourceContext = new ResourceContext(user);
          RID rid = RID.getRID("http://epd.symbol.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.webdav/symbol_productinfo2/cs1504/images");
          try {
            IResource resource = ResourceFactory.getInstance()
                                      .getResource(rid, resourceContext);
            if( resource != null ) {
               // resource found
               System.out.println("resource " + resource.getRID() + " found");
            } else {
               // resource not found
               System.out.println("resource " + resource.getRID() + " does not exist");
          catch( Exception e ) {
            // problem while retrieving the resource
            System.out.println(
                                   "exception while trying to get resource " + e.getRID()
                                   + ": " + e.getMessage()

Where do I set OnPanelChanged variable?

Using DIADEM 2012 Trial
I need to run a sub procedure that will add units (oz-in) to one of my channels and then ultimately converts it to(Nm). I got that working fine so I want to now have it run based on an event. It looks like if I use OnPanelChanged I can set it to call this sub anytime I switch from Nav to View. Where do I set the variable?

Hello Tweedy,
Here are the steps to reproduce:
-Create and save a script file containing:
Call AddUserCommandToEvent("onPanelChanged", "yourSub")
Sub yourSub(LastPanel, NewPanel)
End Sub
The Call AddUserCommandToEvent adds the myTest function as a callback when the onPanelChanged event occurs. The function needs to contain the two parameters for the LastPanel and NewPanel. You can call your sub within that sub or just make your sub the callback function however it would have to have only the LastPanel and NewPanel as parameter inputs.
-Navigate to Settings>>Options>>Extensions>>User Commands
-Add the script you created above
-Click Refresh and the script should be loaded
Ian M.
National Instruments

Where is skype setting will be found in phone

Similar Messages

Maybe you are looking for