Where is the list of files that the migration assistant was unable to copy located?

The Migration Assistant successfully finished transferring most of my information between my old MBP and my new rMBP, even thought the "less than a minute remaining" actually took several hours, even using Thunderbolt cables.
At the end of the migration, the Migration Assistant displayed a message "not all of your files could be transferred".
Where is the log containing the list of files that couldn't be transferred?
The only system log entries relating to the migrations system are of the "2/27/15 9:17:14.000 AM kernel[0]: Process systemmigrationd [546] disabling system-wide CPU Throttling" variety.

>> Once I know what those numbers represent
I would suspect--though I don't know for certain--that the hyphenation-marking digits work as in other UNIX programs. Here are two leads:
http://lists.gnu.org/archive/html/groff/2001-03/msg00026.html
http://www.helsinki.fi/~tapirine/publications/Pirinen-cla-2010.tex
Search them for "odd" or "even" to get started. Good luck.

Similar Messages

Loading property information list by namespace failed or property not found in the list. Verify that the schema is deployed properly.

Hi,
We are facing issue in BizTalk 2010 837 Institutional claim process. The Error is “Loading property information list by namespace failed or property not found in the list. Verify that the schema is deployed properly”.
We have used Custom Pipeline component to update the promoted property like MessageType. When we drop the XML File in Receive Location it generates the XML file through Pipeline but promoted property MessageType is not updated in Receive Location and throw
the error as mentioned.
We have the schema which is not duplicate as well as different version.
Could you please help on this issue.
Thanks in advance.

Praveen,
There are two issues here.
“Loading property information list by namespace failed or property not found in the list. Verify that the schema is deployed properly” issue is normally due to the deployment issues. This more often occurs when you have same schema with multiple
version and this issue is due to the sequence/order in which these two schemas are deployed. If you run the following SQL query in your BizTalk management db replacing it with your target namespace of the schema deployed
SELECT *
FROM bt_XMLShare
WHERE target_namespace like N'http://YourTaggetNameSpace'
You shall see two version of the same schema listed and both of them should have Activate flag set to 1. If any of the schemas is set to 0, then you will have the above mentioned issues. This is due to the way the different versions of the schemas are deployed.
You can undeply both the version, deploy them together or deploy the older version first and the later version later.
And for another issue of custom property not updating the MessageType property, debug the pipeline component code. This issue has no direct impact to the above issue. If you you’re your Message Type to be updated and if it’s not getting changed, then debug
the code and check why its not been updated.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Loading property information list by namespace failed or property not found in the list. Verify that the schema is deployed prop

Hi,
My application was working fine some time back. I am not sure what has changed.I am receiving following error :
A message received by adapter "FILE" on receive location "FILE Edi_Receive_Location_EANDIS" with URI "C:\AMR46783\OUT\*.edi" is suspended.
Error details: There was a failure executing the receive pipeline: "Umix.Van.Pipeline.Custom_Receive_BackupEdi_Pipeline, Umix.Van.PipelineModule, Version=1.0.0.0, Culture=neutral, PublicKeyToken=7e83b13ccba9e75d" Source: "EdiDecoder" Receive Port: "FILE_Custom_Receive_Port" URI: "C:\AMR46783\OUT\*.edi" Reason: Loading property information list by namespace failed or property not found in the list. Verify that the schema is deployed properly.
Any help would be appreciated.

When using custom or 3ed party Adapter you might receive this message "Loading property information list by namespace failed or property not found
in the list" in the event log”
Usually this error caused by when deleting default application (BizTalk Application 1) that used to store message context
property field schemas that are provided by adapter vendor to
You can solve this problem by simply reinstall the adapter or selecting repair adapter option. Or GACing and deploying required property files
manually.
Please mark answers that solve your problem.

I took some videos on my phone and my ipod touch doesnt seem to recognize the type of files that the videos are under

my phone is an older flip phone that is severely out of date but i am able to take videos on it. i am getting ready to get a new phone and i took my memory card out and moved the videos onto a computer but when i try to sync them to my ipod touch they dont sync... can anyone help me change the files of the videos or fugure out how to sync them to my ipod so i dont lose them? please?

You have to convert the format to one that is compatible with the iPod. Yu can use the free Handbrake conouter app.
Also see:
Why can't I transfer videos to my iPod?
Frequently asked questions about viewing and syncing video with iTunes and iPod

How to make a java program that will give you the list of files in the dir

How can you make a program in java that will list all the files in a directory with out useing the File,FileWriter,FileReader,InputStreamReader,FileInputStream,RandomAccessFile etc. classes

What is with these instructors? So far today I have
seen
Do something 100 times, but don't use a loop
Format numbers, but don't use NumberFormat
and now this.
What are these people trying to teach?
Java??? I don't think so.Perhaps it is because these instructors are learning Java at the same time as their students. They are only one chapter ahead of the students. :(

Can I edit the list of words that are suggested when texting?

When inputting letters into the keyboard, suggested words appear when the word is incomplete or misspelled.
Can one edit the list of words that the computer (Iphone 4S) retrieves from?
Thanks!

No, the list isn't directly editable. However, if you reject the suggestion by tapping the "x" it will eventually learn the original word you typed and stop suggesting alternatives.

How to get the list of files of floder

hello,
I am using Forms 6i , i want to get the list of file of the directory
which function i have to use,
thx.

In this demo you will find an example
http://www.oracle.com/technology/sample_code/products/forms/6idemos.html
Regards

How to update a large (over 4 million item) List(Of Byte) quickly by altering indexes contained in a Dictionary(Of Integer, Byte) where the Dictionaries keys are the indexes in the List(Of Byte) that need to be changed to the values for those indexes?

   I'm having some difficulty with transferring images from a UDP Client to a UDP Server. The issue is receiving the bytes necessary to update an original image sent from the Client to the Server and updating the Servers List(Of Byte) with the
new bytes replacing bytes in that list. This is a simplex connection where the Sever receives and the Client sends to utilize the least amount of bandwidth for a "Remote Desktop" style application where the Server side needs image updates of whatever
occurs on the Client desktop.
   So far I can tranfer images with no issue. The images can be be any image type (.Bmp, .Gif, .JPeg, .Png, etc). I was working with sending .JPeg's as they appear to be the smallest size image when a Bitmap is saved to a memory stream as type
.JPeg. And then I am using GZip to compress that byte array again so it is much smaller. However on a loopback on my NIC the speed for sending a full size screen capture is not very fast as the Server updates fairly slowly unless the Clients screen capture
Bitmap is reduced in size to about 1/3'd of the original size. Then about 12000 bytes or less are sent for each update.
   Due to .JPeg compression I suppose there is no way to get the difference in bytes between two .JPegs and only send those when something occurs on the desktop that alters the desktop screen capture image. Therefore I went to using .Bmp's as each
.Bmp contains the same number of bytes in its array regardless of the image alterations on the desktop. So I suppose the difference in bytes from a second screen capture and an inital screen capture are what is different in the second image from the initial
image.
   What I have done so far is save an initial Bitmap of a screen capture using a memory stream and saving as type .Bmp which takes less than 93 milliseconds for 4196406 bytes. Compressing that takes less than 118 milliseconds to 197325 bytes for
the current windows on the desktop. When that is done PictureBox1 is updated from nothing to the captured image as the PictureBox's background image with image layout zoom and the PictureBox sized at 1/2 my screens width and 1/2 my screens height.
   Then I save a new Bitmap the same way which now contains different image information as the PictureBox is now displaying an image so its back color is no longer displayed (solid color Aqua) and the cursor has moved to a different location. The
second Bitmap is also 4196406 in bytes and compressed it was 315473 bytes in size.
   I also just found code from this link Converting a Bitmap to a Byte Array (and Byte Array to Bitmap) which gets a byte array
directly from a Bitmap and the size of that is 3148800 for whatever is full screen captured on my laptop. So I should be able to work with smaller byte arrays at some point.
   The issue I'm having is that once the Client sends an image of the desktop to the Server I only want to update the server with any differences occuring on the Clients desktop. So what I have done is compare the first screen captures bytes (stored
in a List(Of Byte)) to the second screen captures bytes (stored in a List(Of Byte)) by using a For/Next for 0 to 4196405 where if a byte in the first screen captures List is not equal to a byte in the second screen captures List I add the index and byte of
the second screen captures list to a Dictionary(Of Integer, Byte). The Dictionary then only contains the indexes and bytes that are different between the first screen capture and second screen capture. This takes about 125 milliseconds which I think is pretty
fast for 4196406 byte comparison using a For/Next and adding all the different bytes and indexes for each byte to a Dictionary.
    The difference in Bytes between the inital screen capture and the second screen capture is 242587 as an example which changes of course. For that amount of bytes the Dictionary contains 242587 integers as indexes and 242587 bytes as different
bytes totaling 485174 bytes for both arrays (keys, values). Compressed the indexes go from 242587 to 43489 bytes and the values go from 242587 to 34982 bytes. Which means I will have to send 78, 481 bytes from the Client to the Server to update the display
on the server. Quite smaller than the original 4196406 bytes of the second Bitmap saved to type .Bmp or the compressed size of that array which was 315473 bytes. Plus a few bytes I add as overhead so the server knows when an image array ends and how many packets
were sent for the array so it can discard complete arrays if necessary since UDP is lossfull although probably not so much in current networks like it may originally have been when the internet started.
    In reality the data from the Client to the Server will mostly be the cursor as it moves and updating the Server image with only a few hundred bytes I would imagine at a time. Or when the cursor selects a Button for example and the Buttons
color changes causing those differences in the original screen capture.
   But the problem is if I send the Dictionaries Indexes and Bytes to the Server then I need to update the original Bitmap List(Of Byte) on the server by removing the Bytes in the received informations Index locations array from the Servers Bitmap
List(Of Byte) and replacing those Bytes with the Bytes in the received informations Byte array. This takes so long using a For/Next for however many indexes are in the received informations Index array to update the Bitmap List(Of Byte) on the server using
"Bmp1Bytes.RemoveAt(Index As Integer)" followed by "Bmp1Bytes.Insert(Index As Integer, Item As Byte)" in the For/Next.
    I've tried various For/Next statements including using a new List(Of Byte) with If statements so If the the integer for the For/Next ='s the Key in a Dictionary(Of Integer, Byte) using a Counter to provide the Dictionaries Key value then
the Dictionaries byte value will be added to the List(Of Byte) and the counter will increas by one Else the List(Of Byte) adds the original "Bmp1Bytes" byte at that index to the new List(Of Byte). This takes forever also.
   I also tried the same For/Next adding to a new Dictionary(Of Integer, Byte) but that takes forever too.
   I think I could use RemoveRange and AddRange to speed things up. But I don't know how to retrieve a contiguous range of indexes in the received indexes that need to be updated in the servers "Bmp1Bytes" List(Of Byte) from the received
array of indexes and bytes which are in a Dictionary(Of Integer, Byte). But I believe this would even be slower than some realistic method for replacing all Bytes in a List(Of Byte) when I have the indexes that need to be replaced and the bytes to replace
them with.
   Even if I just used AddRange on a new List(Of Byte) to add ranges of bytes from the original "Bmp1Bytes" and the changes from the Dictionary(Of Integer, Byte) I think this would be rather slow. Although I don't know how to do that
by getting contiguous ranges of indexes from the Dictionaries keys.
   So I was wondering if there is some method perhaps using Linq or IEnumerable which I've been unable to figure anything out which could do this.
   I do have some copy and pasted code which I don't understand how it works that I am using which I would guess could be altered for doing something like this but I can't find information that provides how the code works. Or even if I did
maybe I can't understand it. Like the code below which is extremely fast.
   Dim strArray() As String = Array.ConvertAll(Of Integer, String)(BmpComparisonDict.Keys.ToArray, Function(x) x.ToString())
La vida loca

Monkeyboy,
That was quite a bit to read, but still a bit unclear. Could you put a specific list of goals/questions, asked in the smallest possible form?
It seems like either you're making a program that monitors activity on your computer, or you're writing some kind of remote pc app.
When you do get your bytes from using lockbits, keep in mind all the files header info would be lost. I think retaining the header info is worth the extra bytes.
The other, thing: I'm not sure if you're taking 32bpp screen shots, but also keep in mind that the "whole desktop" is the final destination for blended graphics, if that makes sense. What I mean is that there is no need to capture an "alpha"
channel for a desktop screenshot, as alpha would always be 255, this could save you 1 byte per pixel captured... Theres nothing "behind" the desktop, therefore no alpha, and every window shown above the desktop is already blended. I suggest using
24Bpp for a full screen capture.
Your X,Y information for the mouse could be stored as UINT16, this would save you a measly 2 bytes per location update/save.
When you update your byte arrays, maybe you can turn the array into a stream and write to whatever index, however many bytes, that should prevent a "Shift" of bytes, and instead overwrite any bytes that "get in the way".
ex
Dim example As String = "This is an example."
Dim insertString As String = "was"
Dim insertBytes As Byte() = System.Text.Encoding.ASCII.GetBytes(insertString)
Dim bytes As Byte() = System.Text.Encoding.ASCII.GetBytes(example)
Dim modifiedBytes As Byte() = {}
Using ms As New System.IO.MemoryStream(bytes)
ms.Position = 5
ms.Write(insertBytes, 0, 3)
modifiedBytes = ms.ToArray
End Using
Dim newString As String = System.Text.Encoding.ASCII.GetString(modifiedBytes)
'Notice how below there isn't the word "is" anymore, and that there isn't a
'space.
'This demonstrates that you overwrite existing data, versus shifting everything to
'the right.
'Returns: This wasan example.
MsgBox(newString)
“If you want something you've never had, you need to do something you've never done.”
Don't forget to mark
helpful posts and answers
! Answer an interesting question? Write a
new article
about it! My Articles
*This post does not reflect the opinion of Microsoft, or its employees.
Well it's too much to read. I was really tired when I wrote it. Even the below is too much to read but perhaps gets the point across of what I would like to do which I think
Joel Engineer may have answered but I'm not sure. As I'm still too tired to understand that yet and research what he said in order to figure it out yet.
But maybe the code below can provide the concept of the operation with the comments in it. But seeing as how I'm still tired it may be confused.
Option Strict On
Imports System.Windows.Forms
Imports System.IO
Imports System.IO.Compression
Imports System.Drawing.Imaging
Imports System.Runtime.InteropServices
Public Class Form1
Dim Bmp1Bytes As New List(Of Byte)
Dim Bmp1BytesCompressed As New List(Of Byte)
Dim Bmp2Bytes As New List(Of Byte)
Dim BmpComparisonDict As New Dictionary(Of Integer, Byte)
Dim BmpDifferenceIndexesCompressed As New List(Of Byte)
Dim BmpDifferenceBytesCompressed As New List(Of Byte)
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
SomeSub()
End Sub
Private Sub SomeSub()
' Pretend this code is in UDP Client app. A screen capture is performed of the desktop. Takes about 90 milliseconds.
Bmp1Bytes.Clear()
Using BMP1 As New Bitmap(Screen.PrimaryScreen.Bounds.Width, Screen.PrimaryScreen.Bounds.Height)
Using g1 As Graphics = Graphics.FromImage(BMP1)
g1.CopyFromScreen(0, 0, 0, 0, BMP1.Size)
Cursor.Draw(g1, New Rectangle(Cursor.Position.X, Cursor.Position.Y, Cursor.Size.Width, Cursor.Size.Height))
Using MS As New MemoryStream
BMP1.Save(MS, System.Drawing.Imaging.ImageFormat.Bmp)
Bmp1Bytes.AddRange(MS.ToArray)
End Using
End Using
End Using
Bmp1BytesCompressed.AddRange(Compress(Bmp1Bytes.ToArray))
' UDP Client app sends Bmp1BytesCompressed.ToArray to UDP Server which is the entire image of the desktop that the UDP
' Client is on. This image takes awhile to send since compressed it is about 177000 bytes from over 4000000 bytes.
' I will be using different code just to get the bytes from the actual Bitmap in the future. That is not important for now.
' Pretend the UDP Server has received the bytes, decompressed the array received into a List(Of Byte) and is displaying
' the image of the UDP Clients desktop in a PictureBox.
' Now the image on the UDP Clients desktop changes due to the mouse cursor moving as an example. Therefore a new Bitmap
' is created from a screen capture. This takes about 90 milliseconds.
Bmp2Bytes.Clear()
Using BMP2 As New Bitmap(Screen.PrimaryScreen.Bounds.Width, Screen.PrimaryScreen.Bounds.Height)
Using g1 As Graphics = Graphics.FromImage(BMP2)
g1.CopyFromScreen(0, 0, 0, 0, BMP2.Size)
Cursor.Draw(g1, New Rectangle(Cursor.Position.X, Cursor.Position.Y, Cursor.Size.Width, Cursor.Size.Height))
Using MS As New MemoryStream
BMP2.Save(MS, System.Drawing.Imaging.ImageFormat.Bmp)
Bmp2Bytes.AddRange(MS.ToArray)
End Using
End Using
End Using
' Now I have the original images bytes in Bmp1Bytes and the new images bytes in Bmp2Bytes on the UDP Client. But I don't
' want to send all of the bytes in Bmp2Bytes to the UDP Server. Just the indexes of and the bytes that are different in
' Bmp2Bytes from Bmp1Bytes.
' This takes less than 100 milliseconds for what I've tested so far where over 500000 bytes in Bmp2Bytes are different
' than the bytes in Bmp1Bytes. Usually that amount would be much less. But during testing I was displaying the image
' from Bmp1 bytes in a PictureBox so a large amount of data would change between the first screen shot, the PictureBox
' then displaying an image on the same PC and then the second screen shot.
BmpComparisonDict.Clear()
For i = 0 To Bmp1Bytes.Count - 1
If Bmp1Bytes(i) <> Bmp2Bytes(i) Then
BmpComparisonDict.Add(i, Bmp2Bytes(i))
End If
Next
' So now I have all the difference bytes and their indexes from Bmp2Bytes in the BmpComparisonDict. So I compress
' the indexes into on List and the Bytes into another List.
BmpDifferenceIndexesCompressed.Clear()
BmpDifferenceBytesCompressed.Clear()
BmpDifferenceIndexesCompressed.AddRange(Compress(BmpComparisonDict.Keys.SelectMany(Function(d) BitConverter.GetBytes(d)).ToArray()))
BmpDifferenceBytesCompressed.AddRange(Compress(BmpComparisonDict.Values.ToArray))
' Now pretend the UDP Client has sent both those arrays to the UDP Server which has added both decompressed arrays
' to a Dictionary(Of Integer, Byte). And the server has the original image decompressed bytes received in a List
' called Bmp1Bytes also.
' This is where I am stuck. The UDP Server has the Dictionary. That part was fast. However there is no
' fast method I have found for creating a new List(Of Byte) where bytes in the originally received List(Of Byte) that
' do not have to be altered are placed into a new List(Of Byte) except for the indexes listed in the
' Dictionary(Of Integer, Byte) that need to be placed into the appropriate index locations of the new List(Of Byte).
' The below example for doing so is exceptionally slow. Pretend UpdateDictionary has all of the decompressed indexes
' and bytes received by the UDP Server for the update contained within it.
Dim UpdateDictionary As New Dictionary(Of Integer, Byte)
Dim UpdatedBytes As New List(Of Byte)
Dim Counter As Integer = 0
For i = 0 To Bmp1Bytes.Count - 1
If i = UpdateDictionary.Keys(Counter) Then ' Provides the index contained in the Keys for the Dictionary
UpdatedBytes.Add(UpdateDictionary.Values(Counter))
Counter += 1
If Counter > UpdateDictionary.Count - 1 Then Counter = 0
Else
UpdatedBytes.Add(Bmp1Bytes(i))
End If
Next
' So what I'm trying to do is find an extremely fast method for performing something similar to what the
' above operation performs.
End Sub
Private Function Compress(BytesToCompress() As Byte) As List(Of Byte)
Dim BytesCompressed As New List(Of Byte)
Using compressedStream = New MemoryStream()
Using zipStream = New GZipStream(compressedStream, CompressionMode.Compress)
zipStream.Write(BytesToCompress, 0, BytesToCompress.Count)
zipStream.Close()
BytesCompressed.AddRange(compressedStream.ToArray)
End Using
End Using
Return BytesCompressed
End Function
Private Function Decompress(BytesToDecompress() As Byte) As List(Of Byte)
Dim BytesDecompressed As New List(Of Byte)
Using DecompressedStream = New MemoryStream()
Using zipStream = New GZipStream(DecompressedStream, CompressionMode.Decompress)
zipStream.Write(BytesToDecompress, 0, BytesToDecompress.Count)
zipStream.Close()
BytesDecompressed.AddRange(DecompressedStream.ToArray)
End Using
End Using
Return BytesDecompressed
End Function
End Class
La vida loca

After I've heard an audiobook downloaded from the public library, how do I delete it from the Shuffle? When I plug it into my computer, I get a screen showing how much space is left on the Shuffle but no list of files that I can delete. WRA

After I've heard an audiobook downloaded from the public library, how do I delete it from the Shuffle to make room for other audiobooks? When I plug it into my computer, I get a screen showing how much space is left on the Shuffle but no list of files that I can delete. These books, incidentally do not appear in the ITunes screen. WRA

Select the iPod shuffle in the iTunes sidebar (under DEVICES). If this is a current 4th (or 3rd) gen iPod shuffle, you should be able to see the contents of the shuffle by type, intented under the shuffle's name (still in the sidebar). Select Music or Audiobooks (not sure where those items from the library will be listed). The items will be listed to the right, for each category. Find the items, select, and delete.
It's on page 20 of the manual
http://manuals.info.apple.com/en_US/iPod_shuffle_4thgen_User_Guide.pdf
NOTE: If this is an 1st or 2nd gen iPod shuffle, select the iPod shuffle in the iTunes sidebar (under DEVICES). Over to the right, go to the Contents tab, where the items are listed. Select and delete them from this list.
I find it more convenient to make a playlist in iTunes with things I want to put on the shuffle. I then set up automatic syncing (or use autofill) to have iTunes load the shuffle from that playlist, automatically.

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help?

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help? Is there some way to add the CMYK profile to the list of choices that are available in the export preset dialogue such that I can choose it?

leonieDF
Thanks for your response. My profiles are located within color sync utility as you can see here:
These profiles do not respond to clicking and dragging. Since they are all in one place, more or less, I'm reluctant to make further attempts to relocate them. Accessing the CMYK profile is the first difficult experience I've encountered with this arrangement. I have never needed the CMYK profile until recently, and that need has now past. However, it remains a mystery to me as to why it does not appear with all the others on the menu of export choices in Aperture 2, or on the menu of profile assignment choices in the Preview application (where again all the other profiles are listed as choices). I'm beginning to think my current set up will permit me to view an image that was created in CMYK space, but does not easily assign, or convert to that space. I don't face these restrictions with all the others, so it remains a curious circumstance for me. I anticipate upgrading my computer and software in the near future which might alleviate this issue altogether. Again, many thanks for your attention to this matter. The reach of this community is astounding.

Where I can see the list of colors that OBIEE uses as default.?

Hi
I can see how to set the graph series color but I would like to know where I can see the list of colors that OBIEE uses as default.
In OBIEE 10, the list of color is the file /OracleBI/web/app/res/s_oracle10/chartsupport/ palette.cxml
In OBIEE 11 the file that I should change (bifoundation/web/msgdb/s_blafp/viewui/chart/dvt-graph-skin.xml) is empty, not series as default.
Any idea?
thanks!

user722302 wrote:
Hi
I can see how to set the graph series color but I would like to know where I can see the list of colors that OBIEE uses as default.
In OBIEE 10, the list of color is the file /OracleBI/web/app/res/s_oracle10/chartsupport/ palette.cxml
In OBIEE 11 the file that I should change (bifoundation/web/msgdb/s_blafp/viewui/chart/dvt-graph-skin.xml) is empty, not series as default.
Any idea?
thanks!Read these:
http://www.obieefans.com/how-to-set-default-graph-series-colors-in-obiee-11g/
http://debaatobiee.wordpress.com/tag/graph-color-obiee-11g/
http://shivabizint.wordpress.com/2011/04/17/setting-default-graph-series-colors-in-obiee-11g/

What is the list of file prefixes that make a file appear first in the finder?

Hi!
I was just curious :
What is the list of file prefixes that make a file appear first in the finder?
For example, files and folders whose names start with "A" will appear before files whose names start with "B",
but what about a list of characters for files and folders before the letter "A"?
I'm doing some file organisation, and I need certain things to appear at the top of the list.
I have noticed that the character-prefixes "0" and "(" seem to make things appear before "A"
I would like a complete list if there is one available.
Thank you!

Pretty much any number or a space character. Punctuation does too, in theory, but I'd advise to limit it to hyphens and underscores. Periods are OK in the middle of file names but you won't be able to start a file name with one at the Finder level since that would actually hide the file.
Matt

When you scroll to the bottom of the list of files in Finder, the left to right scrollbar doesn't let you click the last file and it covers the file for a while until it disappears. Is this a bug? How do I not make that happen?

When you scroll to the bottom of the list of files in Finder, the left to right scrollbar doesn't let you click the last file and it covers the file for a while until it disappears. Is this a bug? How do I not make that happen?

An odd workaround: click "Always" in System Preferences/General/Show scroll bars. The scroll bars will always show, but they won't cover your last file.
See this other post: https://discussions.apple.com/message/20572471#20572471

HT1420 where do i find the list of computers that are authorized in my account?

where do i find the list of computers that are authorized in my account?

Thanks for that.
I downloaded the tool and something funny happens, i am trying to start the tool but I get an error saying: "The airport management utility requires airport 3.4 or later".
I have airport 5.7 on osx 10.5 so of course nothing updates with system software update.
Any one?

When I publish my site on one specific page where i've added {tag_pagecontent} I get the error:Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.

When I publish my site on one specific page where I've added {tag_pagecontent} I get the error:
'Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.'
I'm trying to get a blog module going, I've even deleted the html insert bog with the tag in and re-published which then I don't get the error but as a result no blog either. But then I add the tag in again and publish the error comes back. I've used the dev console and it says that my musicians sample.css is out of date but why is it only out of date when I add in html to my muse site?
HELP!!!! I've searched other threads and to no avail I'm publishing so no direct ftp going on. the only thing I changed in business catalyst was the module stylesheet in order to style the blog. I've tried uploading and replacing all files nothing seems to work. the site is here:
http://www.musicstudentsforhire.co.uk/musicians-samples.html
It's only this page as it has the blog on. Also I've noticed when I've re-published occasionally it will show the mobile version on my desktop and not the desktop version??? no idea why that's happening so I've had to turn that off. any explanation on why that is happening would also be much appreciated.

I haven't received an answer as of yet, I'll post t on here when I do. I de-activated the mobile site because it's my clients site so he needs it to be operational during the day. I hope someone gives me an answer soon.

Where is the list of files that the migration assistant was unable to copy located?

Similar Messages

Maybe you are looking for