Loading property information list by namespace failed or property not found in the list. Verify that the schema is deployed properly.
Hi,
We are facing issue in BizTalk 2010 837 Institutional claim process. The Error is “Loading property information list by namespace failed or property not found in the list. Verify that the schema is deployed properly”.
We have used Custom Pipeline component to update the promoted property like MessageType. When we drop the XML File in Receive Location it generates the XML file through Pipeline but promoted property MessageType is not updated in Receive Location and throw
the error as mentioned.
We have the schema which is not duplicate as well as different version.
Could you please help on this issue.
Thanks in advance.
Praveen,
There are two issues here.
“Loading property information list by namespace failed or property not found in the list. Verify that the schema is deployed properly” issue is normally due to the deployment issues. This more often occurs when you have same schema with multiple
version and this issue is due to the sequence/order in which these two schemas are deployed. If you run the following SQL query in your BizTalk management db replacing it with your target namespace of the schema deployed
SELECT *
FROM bt_XMLShare
WHERE target_namespace like N'http://YourTaggetNameSpace'
You shall see two version of the same schema listed and both of them should have Activate flag set to 1. If any of the schemas is set to 0, then you will have the above mentioned issues. This is due to the way the different versions of the schemas are deployed.
You can undeply both the version, deploy them together or deploy the older version first and the later version later.
And for another issue of custom property not updating the MessageType property, debug the pipeline component code. This issue has no direct impact to the above issue. If you you’re your Message Type to be updated and if it’s not getting changed, then debug
the code and check why its not been updated.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.
Similar Messages
-
Hi,
My application was working fine some time back. I am not sure what has changed.I am receiving following error :
A message received by adapter "FILE" on receive location "FILE Edi_Receive_Location_EANDIS" with URI "C:\AMR46783\OUT\*.edi" is suspended.
Error details: There was a failure executing the receive pipeline: "Umix.Van.Pipeline.Custom_Receive_BackupEdi_Pipeline, Umix.Van.PipelineModule, Version=1.0.0.0, Culture=neutral, PublicKeyToken=7e83b13ccba9e75d" Source: "EdiDecoder" Receive Port: "FILE_Custom_Receive_Port" URI: "C:\AMR46783\OUT\*.edi" Reason: Loading property information list by namespace failed or property not found in the list. Verify that the schema is deployed properly.
Any help would be appreciated.When using custom or 3ed party Adapter you might receive this message "Loading property information list by namespace failed or property not found
in the list" in the event log”
Usually this error caused by when deleting default application (BizTalk Application 1) that used to store message context
property field schemas that are provided by adapter vendor to
You can solve this problem by simply reinstall the adapter or selecting repair adapter option. Or GACing and deploying required property files
manually.
Please mark answers that solve your problem. -
I have a Director MX 2004 based training course that is
periodically getting the following error:
property not found: #text
This training program was developed in Director 6.5 and
updated last year to MX 2004. The training program had been running
without error for six years prior to the update. I didn't update
the script that is causing the error until after receiving the
error reports.
After getting the error report I was able to reproduce the
error while running in MX 2004 and the error said:
Script error: Property not found
set the text of member "IN" = tempIN & sp &
pretempIN
#text
I checked the debugger and the local variables were all valid
and nothing seem out of place. The field cast member "IN" exists
and the member's sprite is static in the score (i.e., it's not
being dynamically created).
Since I couldn't figure out what the problem was I updated
the field update scripts to the new syntax:
member("INText", "Internal").text = tempIN & sp &
pretempIN
I also changed the name of the cast member thinking that the
name "IN" may be causing the problem. There are no other cast
members of the same name. Unfortunately, I'm still getting the same
error. There are other field member sprites that are getting
updated successfully before this line of code but for some reason
this particular field member sprite is causing the error, even
after changing the name of the member. I've since moved my text
formatting script to the frame script in the score where the field
members are located and tried preloading the member but neither of
those changes helped.
This error is very sporadic and I've only been able to
reproduce it few times on my local machine, and not since I updated
the script syntax and the field name, but my client is still
encountering the error. I checked that my client's program file
installation is up-to-date and they're running the newest
executable.
Any ideas of what might be causing the problem? I'm
stumped...
Markquote:
You seem to be using #field member and #text member
interchangably. They're
not the same type of member and they have different
properties.
Actually, I'm not. It's a field member. The member's name
"INText" probably led you to believe it's a text member. I changed
the member's name from "IN" to "INText" as I thought perhaps the
"IN" may be causing the problem. The member has always been a field
member. I'm not formatting the field or anything like that, I'm
only replacing the field contents. I don't use Director much
anymore, other than this project, but having used both 7.5 and MX,
I assumed that I could access the text property of a field using
the member("myField", "castName").text syntax as per the docs.
As for the concatenation, the variables are all strings so it
shouldn't really matter. The real problem is that the field
member's text property can't be found, not what I'm putting into
it. And the fact that it only happens occasionally is what I can't
figure out. Since I encountered the error myself inside of Director
and was able to run the debugger I was able to see all of the
variables in the debugger and check for the field member and its
properties in the Message window and everything looked okay.
quote:
To double check the member coflickt issue (director always
operates on the first occurance of a member name
It's definitely the only member using the name "INText",
plus, I checked all cast libs and it's a unique name.
When I originally converted the movie I do recall that I had
another cast member named "IN", the original name of the field
member, when I converted the movie. I can't remember the type of
member it was but I'm pretty sure it wasn't a field. Perhaps the
movie still has some kind of reference to that not field member and
may point to it occasionally, even though I've since renamed the
original field cast member to "INText".
Mark -
ADF Customization (Fusion Apps) - Property not found exception
All
Trying to customize a Fusion Apps application(essentially ADF) where in a popup has to be inserted into an existing page and displayed on UI on a Submit button click.
I have bound the popup to a backing bean property 'Sp1' so that the popup can be invoked programmatically from an action listener method. Note: Show popup behavior is not an option due to some of the business requirements.
When the page renders, it throws the exception 'Sp1' property not found in the backing bean class. Although the Submit button is able invoke the action listener method without an issue.
Not sure why the property is not found to the page when it is able to invoke other methods in the class. Any pointers?
Here are the steps followed:
1. Opened JDev in Fusion Apps Dev role > Created a ViewController project > Created a java bean A, manually added a RichPopup property Sp1, added an action listener method 'submitForApproval'
2. Created an Adf jar and deployed > Placed the jar under WEB-INF/lib directory under the EAR/WAR on the server and redeployed so that the jar becomes available to the Fusion App
3. Created another app which is a FA Customization App and a project under it
4. Now re-opened JDev in Fusion Apps Customization role > and opened up the FA Customization App
5. Customized the Fusion Apps page to associate the 'submitForApproval' bean action listener method to the existing Submit button on the page
6. Customized the page to insert a popup with Id='Sp1', marked the property contentDelivery=lazyUncached
7. Customized the corresponding taskflow to add the managed bean entry for the new bean
When I apply the customization MAR on the APP and run the page on the server, I see 'property Sp1 not found in the bean class' exception on the page.
However, when I click on Submit button anyway I see that the contents of the method are executed. So, I believe the page is definitely finding the class but not this property.
Verified that Sp1 property is of type RichPopup and has accessors in the bean.
Any pointers would be much useful.
Thanks
NiranjanSince we donot use FusionApps , it will be hard to comment on this . Please post this on the internal ADF Frontend Forum @ myforums.oracle.com
-
AIA Property Not Found (SystemConfiguration/EH.PASSWORD) Error
Hi,
We have Oracle SOA 11.1.1.5 and AIA installed at runtime getting the below errors. We have the correct version of AIAConfigurationProperties.xml in MDS i.e. /apps/AIAMetaData/config/AIAConfigurationProperties.xml inside MDS and EH.PASSWORD and other values are set but still getting this error. Any idea what might be wrong.
oracle.apps.aia.core.config.PropertyNotFoundException: Property Not Found (SystemConfiguration/EH.PASSWORD)
Error Message: {http://schemas.oracle.com/bpel/extension}runtimeFault
Fault ID default/AIAAsyncErrorHandlingBPELProcess!1.0*soa_f21ca51d-6962-4cc1-95cf-349d3f9c6caf/AIAAsyncErrorHandlingBPELProcess/90490-BxExe0-BpSeq1.6-2
Fault Time Feb 21, 2013 5:31:40 PM
Non Recoverable System Fault :
<bpelFault><faultType>0</faultType><runtimeFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>oracle.apps.aia.core.config.PropertyNotFoundException: Property Not Found (SystemConfiguration/EH.PASSWORD)</summary></part><part name="detail"><detail>java.lang.RuntimeException: oracle.apps.aia.core.config.PropertyNotFoundException: Property Not Found (SystemConfiguration/EH.PASSWORD) at oracle.apps.aia.core.eh.SendNotificationMessage.initializeProxy(SendNotificationMessage.java:135) at oracle.apps.aia.core.eh.SendNotificationMessage.sendNotificationBasedOnTemplate(SendNotificationMessage.java:177) at oracle.apps.aia.core.eh.AIAErrorHandlerImpl.sendEmailNotification(AIAErrorHandlerImpl.java:109) at oracle.apps.aia.core.eh.AIAErrorHandlerImpl.sendNotification(AIAErrorHandlerImpl.java:94) at oracle.apps.aia.core.eh.InvokeBusinessErrorHandler.process(InvokeBusinessErrorHandler.java:34) at orabpel.aiaasyncerrorhandlingbpelprocess.ExecLetBxExe0.execute(ExecLetBxExe0.java:86) at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELxExecWMP.__executeStatements(BPELxExecWMP.java:42) at com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform(BaseBPELActivityWMP.java:158) at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:2543) at com.collaxa.cube.engine.CubeEngine._handleWorkItem(CubeEngine.java:1165) at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1071) at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:73) at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:220) at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:328) at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4430) at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4361) at com.collaxa.cube.engine.CubeEngine._createAndInvoke(CubeEngine.java:698) at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:555) at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.createAndInvoke(CubeEngineBean.java:103) at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.syncCreateAndInvoke(CubeEngineBean.java:145) at com.collaxa.cube.engine.ejb.impl.bpel.BPELEngineBean.syncCreateAndInvoke(BPELEngineBean.java:111) at sun.reflect.GeneratedMethodAccessor2932.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104) at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:94) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413) at oracle.security.jps.ee.ejb.JpsAbsInterceptor.runJaasMode(JpsAbsInterceptor.java:81) at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:112) at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:105) at sun.reflect.GeneratedMethodAccessor1164.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310) at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37) at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54) at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy279.syncCreateAndInvoke(Unknown Source) at com.collaxa.cube.engine.ejb.impl.bpel.BPELEngineBean_51369e_ICubeEngineLocalBeanImpl.__WL_invoke(Unknown Source) at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:39) at com.collaxa.cube.engine.ejb.impl.bpel.BPELEngineBean_51369e_ICubeEngineLocalBeanImpl.syncCreateAndInvoke(Unknown Source) at com.collaxa.cube.engine.delivery.DeliveryHandler.callCreateAndInvoke(DeliveryHandler.java:790) at com.collaxa.cube.engine.delivery.DeliveryHandler.initialPostAnyType(DeliveryHandler.java:362) at com.collaxa.cube.engine.delivery.DeliveryHandler.initialPost(DeliveryHandler.java:249) at com.collaxa.cube.engine.delivery.DeliveryHandler.post(DeliveryHandler.java:106) at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.post(CubeDeliveryBean.java:556) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104) at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:94) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413) at oracle.security.jps.ee.ejb.JpsAbsInterceptor.runJaasMode(JpsAbsInterceptor.java:81) at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:112) at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:105) at sun.reflect.GeneratedMethodAccessor1164.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310) at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37) at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54) at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy275.post(Unknown Source) at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.__WL_invoke(Unknown Source) at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:39) at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.post(Unknown Source) at oracle.fabric.CubeServiceEngine.post(CubeServiceEngine.java:581) at oracle.integration.platform.blocks.mesh.AsynchronousMessageHandler.doPost(AsynchronousMessageHandler.java:142) at oracle.integration.platform.blocks.mesh.MessageRouter.post(MessageRouter.java:197) at oracle.integration.platform.blocks.mesh.MeshImpl.post(MeshImpl.java:214) at sun.reflect.GeneratedMethodAccessor3707.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307) at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy292.post(Unknown Source) at oracle.integration.platform.blocks.local.LocalInvocationProcessor.post(LocalInvocationProcessor.java:176) at oracle.integration.platform.blocks.soap.WebServiceExternalBindingComponent.post(WebServiceExternalBindingComponent.java:722) at oracle.integration.platform.blocks.mesh.AsynchronousMessageHandler.doPost(AsynchronousMessageHandler.java:142) at oracle.integration.platform.blocks.mesh.MessageRouter.post(MessageRouter.java:197) at oracle.integration.platform.blocks.mesh.MeshImpl.post(MeshImpl.java:214) at sun.reflect.GeneratedMethodAccessor3707.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307) at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:71) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy292.post(Unknown Source) at oracle.fabric.CubeServiceEngine.postToMesh(CubeServiceEngine.java:806) at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:258) at com.collaxa.cube.engine.ext.common.InvokeHandler.__invoke(InvokeHandler.java:1059) at com.collaxa.cube.engine.ext.common.InvokeHandler.handleNormalInvoke(InvokeHandler.java:586) at com.collaxa.cube.engine.ext.common.InvokeHandler.handle(InvokeHandler.java:130) at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:74) at com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform(BaseBPELActivityWMP.java:158) at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:2543) at com.collaxa.cube.engine.CubeEngine._handleWorkItem(CubeEngine.java:1165) at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1071) at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:73) at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:220) at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:328) at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4430) at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4361) at com.collaxa.cube.engine.CubeEngine._createAndInvoke(CubeEngine.java:698) at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:555) at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:673) at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:293) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104) at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:94) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413) at oracle.security.jps.ee.ejb.JpsAbsInterceptor.runJaasMode(JpsAbsInterceptor.java:81) at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:112) at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:105) at sun.reflect.GeneratedMethodAccessor1164.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310) at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37) at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54) at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy275.handleInvoke(Unknown Source) at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.__WL_invoke(Unknown Source) at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:39) at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.handleInvoke(Unknown Source) at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:35) at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:140) at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatchTask.java:88) at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:64) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:662) Caused by: oracle.apps.aia.core.config.PropertyNotFoundException: Property Not Found (SystemConfiguration/EH.PASSWORD) at oracle.apps.aia.core.config.Configuration.getSystemProperty(Configuration.java:240) at oracle.apps.aia.core.config.Configuration.getSystemModuleProperty(Configuration.java:281) at oracle.apps.aia.core.eh.SendNotificationMessage.initializeProxy(SendNotificationMessage.java:104) ... 193 more </detail></part><part name="code"><code>java.lang.RuntimeException</code></part></runtimeFault></bpelFault>ThanksProblem Resolved!
I found out that I had 'http' instead of 'httpd' in the statement where I
registered my servlet, SqlServlet.
Now, I am having difficulty with hot deployment. The server is returning
error 404.
-
we are using VS 2013. i have created new build definition and run that created build its getting failed and showing error message as "The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly
reference?)" and "The type or namespace name 'WinComboBox, UITestControl, WinTitleBar.....etc' could not be found (are you missing a using directive or an assembly reference?)". in the error log is showing the error number are "error CS0234
& error CS0246".
Actually i have created build for automation execution from MTM lab environment. i have to assign the build to the test plan. once the build is passed , i will assign to the test plan and run with automation options.
if i build the solution its getting successfully build. but when i run the created build definition it show the error message's.
Could you guide me how to resolve the above error's ?
Thanks in Advance...Hello Divakar Ponnada,
I have checked the error CS0234 from here:
http://msdn.microsoft.com/en-us/library/0e92xd7b.aspx
It means your project cannot find the proper reference to your type "Visual Studio" from the namespace Microsoft.
May I ask this question, does your build definition means something like the following blog described?
http://www.asp.net/web-forms/overview/deployment/configuring-team-foundation-server-for-web-deployment/creating-a-build-definition-that-supports-deployment
"A build definition is the mechanism that controls how and when builds occur for team projects in TFS. "
If that is the problem, may I ask whether your build agent is in the same machine where you build your application?
The build agent will first search for the reference from its local GAC and if it cannot find it, the error like you said will reports. Please manually build your project from your build agent machine to see the result, or install Visual Studio to your build
agent machine. In that way I think your problem may fixed.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
The VCC property was not found on the resource
Hi all,
I used a subversion to download/upload process in one of my application.
At a point it give an error like this.
svn: The VCC property was not found on the resourceCan someone tell me what that error means, and how to fix it.
Thanks in advance,
itsjava :)There are several resources available if you do a Google (or other favorite search engine) search on this such as [this one|http://www.svnforum.org/2017/viewtopic.php?t=6271&highlight=vcc+property+resource] and [this one|http://svn.haxx.se/dev/archive-2003-10/0674.shtml] and [this one|http://readlist.com/lists/subversion.tigris.org/users/2/11220.html] (that talks about this usually being a web server configuration error). I recommend specifically focusing on Subversion forums such as the [General Setup & Troubleshooting forum|http://www.svnforum.org/2017/viewforum.php?f=16] at [SVNForum.org|http://www.svnforum.org/].
-
Property or collection #comment was not found in the component interface
Hi All,
I am a Java developer trying to connect my java application to a peoplesoft webservice.
I have been able to connect to the PS webservice and access "GET","FIND" methods successfully.
But when i am trying to connect to the CREATE(insert) method, i get the following message text.
<faultcode>SOAP-ENV:Client</faultcode>
<faultstring>Component Interface API.</faultstring>
<detail>
<messages>
<type>Error</type>
<messagesetnumber>91</messagesetnumber>
<messagenumber>74</messagenumber>
<messagetext>Property or collection #comment was not found in the component interface at the given level.</messagetext>
</messages>
</detail>
I dont have any access to peoplesoft or db logs, i started using SOAP UI to get the detail messages.
Can anyone tell me what this message could be??
Basically its an insert method which takes around 40 parameters out of which 2 are mandatory.
The input that i send from my soap ui looks as follows
+*<kcm:CASE_ID></kcm:CASE_ID>*+
<kcm:DISP_TMPL_ID>CRM_GOV</kcm:DISP_TMPL_ID>
<!--Optional:-->
<kcm:QUICK_CD>?</kcm:QUICK_CD>
<!--Optional:-->
<kcm:PROVIDER_GRP_NAME>City Manager Action</kcm:PROVIDER_GRP_NAME>
<kcm:BUSINESS_UNIT>KCM01</kcm:BUSINESS_UNIT>
<!--Optional:-->
<kcm:PRODUCT_ID>?</kcm:PRODUCT_ID>
When i dont send any parameter in case_id i get the above error and when i send +*<kcm:CASE_ID>?</kcm:CASE_ID>*+
i get a sql error
<messages>
<type>Error</type>
<messagesetnumber>200</messagesetnumber>
<messagenumber>0</messagenumber>
<messagetext>SQL error. Stmt #: 650 Error Position: 123 Return: 1722 - ORA-01722: invalid number</messagetext>
<explaintext/>
</messages>
<messages>
<type>Error</type>
<messagesetnumber>200</messagesetnumber>
<messagenumber>0</messagenumber>
<messagetext>SELECT /*+ FIRST_ROWS */ CASE_ID, DISP_TMPL_ID, BUSINESS_UNIT, RC_STATUS, RC_SUMMARY FROM PS_RC_ADD_CASE_VW WHERE CASE_ID=:1 AND DISP_TMPL_ID=:2 ORDER BY CASE_ID, DISP_TMPL_ID</messagetext>
<explaintext/>
</messages>
<messages>
<type>Error</type>
<messagesetnumber>91</messagesetnumber>
<messagenumber>48</messagenumber>
<messagetext>Error accessing search record. {KCM_WEB_CASE_CI} (91,48)</messagetext>
<explaintext>An error occurred while accessing the search record.</explaintext>
</messages>
<messages>
<type>Error</type>
<messagesetnumber>91</messagesetnumber>
<messagenumber>61</messagenumber>
<messagetext>Failed to create the Component Interface</messagetext>
</messages>
I am not understanding how do i debug this further as its very difficult for me to get any peoplesoft logs or db logs.
Any help will be appreciated.
Thanks
Ash
Edited by: ash81 on Jun 14, 2010 1:24 PMThis will be very hard to troubleshoot without access to PeopleSoft.
Ideally, the best way to test it would be replicate the steps you are performing in your code through the component interface/web service, and then on the actual PeopleSoft component to see if you get the same error.
The second case where you haven't put in the parameters, make sure you clear out the ? marks and leave the value empty if you don't need to specify it.
E.g.
Instead of <kcm:QUICK_CD>?</kcm:QUICK_CD>
Use: <kcm:QUICK_CD></kcm:QUICK_CD>
I generally work backwards from soapUI -- look at the soapUI error, then test through the component interface tester in PeopleSoft application designer, then if required test in PeopleSoft. -
Script error property not found
I have a script that get a list of choosen check boxes, it
was working fine but now when i press the button that calls the
script i get a error saying "script error property not found" then
it lists the line i have put a * next to and says #hilite
This is the top part of that script and to my knowlegde i
have not chnaged any of it and it worked before but now it does
not, i also use a script almost identical to this but use it for
radiobuttons instead and the line is the same in that and that
script works, can anybody tell me what as gone wrong?I suspect you have a cast member that uses one of the three
names in the
list and it is not a check box. It's probably before the
actual checkbox
member in the cast so it's finding it first.
Craig Wollman
Lingo Specialist
Word of Mouth Productions
212-928-9581
www.wordofmouthpros.com
"ajrobson" <[email protected]> wrote in
message
news:etn9j1$op2$[email protected]..
>I have a script that get a list of choosen check boxes,
it was working fine
>but
> now when i press the button that calls the script i get
a error saying
> "script
> error property not found" then it lists the line i have
put a * next to
> and
> says #hilite
>
> This is the top part of that script and to my knowlegde
i have not chnaged
> any
> of it and it worked before but now it does not, i also
use a script almost
> identical to this but use it for radiobuttons instead
and the line is the
> same
> in that and that script works, can anybody tell me what
as gone wrong?
>
>
>
> global err
>
> on CheckBoxState -- name of custom handler
> TickedBoxes = [] -- a empty list will be filled where
ever a checkbox is
> ticked
> CheckBoxNames = ["Dr no", "From russia with
love","Casino royale" ]
> repeat with i = 1 to 3 -- repeat for each checkbox
> CurrentCheckbox = CheckBoxNames
> ** if the hilite of member(CurrentCheckbox) then -- if
currentcheckbox
> hilite
> is true (checked)...
> append(TickedBoxes,CurrentCheckbox )
> end if
> end repeat
> return TickedBoxes
> end
> -
No oidAdminClass property not found in servicename.properties file
Hi ,
I am new to forum. I got one exception in lione no 2 as follows, when i am trying to get the user information , as follows.
the code is like this.... Any help...
Tons of advance in advance...
1.ProviderContext pc = pReq.getProviderInstance().getProviderContext();
2.OidManager oidMgr = new OidManagr(pc);
The exception is as follows...
oracle.portal.provider.v2.ProviderException: No oidAdminClass property not found in servicename.properties file
08/04/17 18:43:03 at oracle.portal.utils.v2.ContainerException.fillInStackTrace(Unknown Source)
08/04/17 18:43:03 at java.lang.Throwable.<init>(Throwable.java:195)
08/04/17 18:43:03 at java.lang.Exception.<init>(Exception.java:41)
08/04/17 18:43:03 at oracle.portal.utils.v2.ContainerException.<init>(Unknown Source)
08/04/17 18:43:03 at oracle.portal.provider.v2.ProviderException.<init>(Unknown Source)
08/04/17 18:43:03 at oracle.portal.provider.v2.oid.OidManager.<init>(Unknown Source)
08/04/17 18:43:03 at htdocs.oratest._OraTestShowPage._jspService(_OraTestShowPage.java:90)
08/04/17 18:43:03 at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
08/04/17 18:43:03 at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:569)
08/04/17 18:43:03 at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:305)
08/04/17 18:43:03 at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
08/04/17 18:43:03 at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
08/04/17 18:43:03 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
08/04/17 18:43:03 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
08/04/17 18:43:03 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
08/04/17 18:43:03 at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:253)
08/04/17 18:43:03 at oracle.portal.provider.v2.render.http.AbstractResourceRenderer.renderBody(Unknown Source)
08/04/17 18:43:03 at oracle.portal.provider.v2.render.RenderManager.render(Unknown Source)
08/04/17 18:43:03 at oracle.portal.provider.v2.DefaultPortletInstance.render(Unknown Source)
08/04/17 18:43:03 at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.showPortlet(Unknown Source)
08/04/17 18:43:03 at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.handleHttp(Unknown Source)
08/04/17 18:43:03 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
08/04/17 18:43:03 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
08/04/17 18:43:03 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
08/04/17 18:43:03 at java.lang.reflect.Method.invoke(Method.java:324)
08/04/17 18:43:03 at oracle.webdb.provider.v2.adapter.SOAPServlet.doHTTPCall(Unknown Source)
08/04/17 18:43:03 at oracle.webdb.provider.v2.adapter.SOAPServlet.service(Unknown Source)
08/04/17 18:43:03 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
08/04/17 18:43:03 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
08/04/17 18:43:03 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
08/04/17 18:43:03 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
08/04/17 18:43:03 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
08/04/17 18:43:03 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
08/04/17 18:43:03 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
08/04/17 18:43:03 at java.lang.Thread.run(Thread.java:534)the password value stored in OID is just a hashed value (by default) and it's virtually impossible to retrieve the original value of password, as entered by the user.
There are option in OID for storing the encrypted value (vs the hash value). Perhaps that in this case there are means to do the job.
In my opinion it's a bad choice (from governance perspective) to allow developers retrieving a user password value from a directory.
Patrick. -
Activated fonts not found in the font list.
A constant problem - active fonts not found in the font list.
And often when I can find trouble fonts, they're not correctly alphabetically ordered. I understand this may be the fault of the font author - not saving the correct screen name for the font so it matches it's actual name.
Here's a strange case - Homestead. An approach to typography I've never seen before - you're meant to layer up multiple instances of the same text object and alter it's subset of the Homestead family. But activate the whole family and you'll never find more than one of it's family members at a time. Activate just one and you'll find it (not in alphabetical order, though). Deactivate that one and activate another - now you'll find it. This makes it's very cumbersome to use the font as intended. What is Aunt Illy doing here and why?
will I ever get along with fonts . . .You have a font conflict on your machine. Clear your font cache, you must have another font conflicting. The whole family loads for me, and shows in Illustrator.
There are many products to clear your cache the one below is free for mac
http://homepage.mac.com/mdouma46/fontfinagler/
You can also find and delete all your .lst files, or use font doctor or Font Explorer X Pro -
ISE upgrade failing with "% Manifest file not found in the bundle"
Hello
I am trying to upgrade a brand new ISE 3395 from 1.0.3.337 to 1.0.4 (latest). It keeps failing with
% Manifest file not found in the bundle
Here is the output:
company-ise-01/admin# application upgrade ise-appbundle-1.0.4.573.i386.tar.gpg ftp
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
fusd-ise-01/admin# sh application version ise
Cisco Identity Services Engine
Version : 1.0.3.377
Build Date : Fri May 6 19:30:37 2011
Install Date : Wed Oct 12 22:18:26 2011
I can't find anything about this for ISE, although there are a lot of topics for the same error for ACS. Thanks in advance.
SaroSame problem with 1.1.2 and 1.1.1 patch 5:
ISEcdemo/admin# sh ver
Cisco Application Deployment Engine OS Release: 2.0
ADE-OS Build Version: 2.0.4.018
ADE-OS System Architecture: i386
Copyright (c) 2005-2011 by Cisco Systems, Inc.
All rights reserved.
Hostname: ISEcdemo
Version information of installed applications
Cisco Identity Services Engine
Version : 1.1.1.268
Build Date : Mon Jun 25 05:49:23 2012
Install Date : Wed Sep 12 09:12:53 2012
Cisco Identity Services Engine Patch
Version : 1
Install Date : Wed Sep 12 10:01:22 2012
Cisco Identity Services Engine Patch
Version : 2
Install Date : Wed Sep 12 13:10:36 2012
Cisco Identity Services Engine Patch
Version : 3
Install Date : Tue Nov 27 12:33:19 2012
Cisco Identity Services Engine Patch
Version : 4
Install Date : Tue Nov 27 12:52:50 2012
ISEcdemo/admin# patch install ise-patchbundle-1.1.1.268-5-68046.i386.tar.gz my2
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Patch installation...
% Manifest file not found in the bundle
ISEcdemo/admin#
ISEcdemo/admin# application upgrade ise-appbundle-1.1.2.145.i386.tar.gz my2
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
Can someone verify the downloaded file details? They are different from cisco.com values:
-bash-4.1$ /usr/bin/md5sum.exe /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
2aa9b75ef5d7c1662a1a51844f178b77 */cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
-bash-4.1$ /usr/bin/ls -lAp /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
-rwx------+ 1 Administrators Domain Users 1583851520 Nov 29 00:14 /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz -
I keep trying to load firefox 6 and keep getting this error - The requested URL /cse?cx=partner-pub-3540673482024757:xbhdw8hkfz5&ie=ISO-8859-1&q=&sa=Search was not found on this server. That’s all we know. in English
Bookmark and use this;
Download the '''[https://addons.mozilla.org/en-US/firefox/addon/searchreset/ Mozilla Search Reset]''' {web link}
This add-on is very simple: on installation, it backs up
and then resets your search preferences and home page
to their default values, and then uninstalls itself. This
affects the search bar, URL bar searches, and the home page.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
The type or namespace name 'Optimization' does not exist in the namespace 'System.Web'
App_Start\BundleConfig.cs (1): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (4): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (8): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
I'm getting the above errors when attempting to create a remote build.
I've tried the solution found here (http://blog.davidebbo.com/2014/01/the-right-way-to-restore-nuget-packages.html) but no luck.Hi,
I have an asp.net mvc project in Visual Studio 2013. I'm hosting it on Visual Studio Online.
The project builds fine on my local machine/Visual Studio 2013. When i try to do a build on Visual Studio Online (i created a build definition there), i get similar errors.
App_Start\BundleConfig.cs (2): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\FilterConfig.cs (2): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\RouteConfig.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (9): The type or namespace name 'Controller' could not be found (are you missing a using directive or an assembly reference?)
Global.asax.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (6): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (9): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
App_Start\FilterConfig.cs (8): The type or namespace name 'GlobalFilterCollection' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (11): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (16): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (23): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Helpers, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Optimization". Check to make sure the assembly exists on disk. If this
reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL".
Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Deployment, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "WebGrease". Check to make sure the assembly exists on disk. If this reference is required
by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Antlr3.Runtime". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Newtonsoft.Json". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Assembly strong name "System.Web.Mvc, Version=__MvcPagesVersion__, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL" is
either a path which could not be found or it is a full assembly name which is badly formed. If it is a full assembly name it may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('),
Backslash(\). -
I upgraded to win 8.1 and VS 2013. I created a new Windows 8.1 C# grid project and tried to compile it and I'm seeing the following error: Error 1 The type or namespace name 'Foundation' does not exist in the namespace [my namespace](are
you missing an assembly reference?)
The errors are in navigationhelper.cs line 59
[Windows.Foundation.Metadata.WebHostHidden] // Foundation has the squigglies
public class NavigationHelper : DependencyObject
and app.xaml.cs line 68 ==> rootFrame.Language = Windows.Globalization.ApplicationLanguages.Languages[0]; which causes this error: Error 2 The type or namespace name 'Globalization' does not exist in the namespace [my namespace] (are you missing
an assembly reference?)
Windows phone and mvc projects are working fine and I've installed all the updates and even tried to fix vs 2013.
Any help Is greatly appreciated.I did some more investigation and noticed that if I create an app with a "." in the name then this problem occurs. For example create a windows store project with the default name "App1": this will compile.
However if I name the project "App1.Forms" to correspeond with the default namespace I want, then this problem occurs. Still investigating but anyone should be able to repro it with that step.
Maybe you are looking for
-
Hi All, Could you please solve the following requirement: Requirement: In my RTF Template for the fisrst page we are displaying parameters of the report. In the second page we have 2 tables one is for statement and other one is for Receipt. My requir
-
I have a new Toshiba Thrive tablet and do not see it on the list of tested, supported, or unsupported devices. Will Firefox work on my tablet?
-
Dear Experts, I have new project which has been abandon for long and assigned to me recently. I know what is the steps we need to work. 1. DRS from current CUCM version 2. Install same version of 6.0.1 to new Server 3. Backup from step1. 4. Upgrade t
-
How to install and un-install software in a Mac Networked Environment
I have lots of experience in deploying software via a GPO, or Altiris, in a Windows environment. BUT How do I do the same type of thing in a Mac Environment? I would like an easy way to deploy software across many 100's of Macs. I am open to a 3rd pa
-
I would like help connecting a HP Deskjet 3054 printer to my Airport via USB so I can print from my MacBook Air.