Where on my computer do i find the location of the url and registry key for the toolbars on my system?

we are trying to find the url of one of our toolbars so we can use it on another system. the main interest is how we can locate different parts of the screen display within the computer. we have a very limited understanding of regedit thus will need expanded instructions.
we have a MSI system using window xp sp2
we use firefox
we have two toolbars

Hi massurfer,
I am not sure that you need regedit, but this might be helpful,
http://kb.mozillazine.org/Localstore.rdf
This explanation of customizing localstore.rdf looks possibly helpful as well:
http://mike.kaply.com/2012/03/30/customizing-firefox-default-profiles/
Good luck!

Similar Messages

WHERE ON MY COMPUTER DO I FIND THE USER SPECIFIC SUPPORT FILES FOR FIREFOX?

I am unable to print anything from the web. When I change user names, I am able to print. I called apple computer and they located the problem to be in the specific support files in firefox, but could not tell me where to find them. I am told that if I can find the specific support files, I can cure my problem. Currently, when I try to print, nothing happens and if I try to make a pdf of anything on line, it is blank when opened. Firefox used to work just fine.

Hi massurfer,
I am not sure that you need regedit, but this might be helpful,
http://kb.mozillazine.org/Localstore.rdf
This explanation of customizing localstore.rdf looks possibly helpful as well:
http://mike.kaply.com/2012/03/30/customizing-firefox-default-profiles/
Good luck!

Where on my computer I will find Adobe_Lightroom_x64 - Installatiepakket (*msi)

I try to restore a catalogs
Where on my computer I will find Adobe_Lightroom_x64 - Installatiepakket (*msi)
Ik probeer een catalogus terug te zetten. Er wordt gezocht naar Adobe_Lightroom_x64 - Installatiepakket (*msi)
Waar kan ik die vinden op mijn computer?

Thanks for the support, but a friend of my has solved my problem
Van: johnhawk666
Verzonden: zaterdag 7 maart 2015 16:51
Aan: René Bakker
Onderwerp: Where on my computer I will find Adobe_Lightroom_x64 - Installatiepakket (*msi)
Where on my computer I will find Adobe_Lightroom_x64 - Installatiepakket (*msi)
created by johnhawk666 <https://forums.adobe.com/people/johnhawk666> in Photoshop Lightroom - View the full discussion <https://forums.adobe.com/message/7262762#7262762>

Where on my computer do I access the iTunes movie rental that just downloaded?

Where on my computer do I access the iTunes movie rental that just downloaded? I can't find it anywhere . . .

In iTunes choose the 'Films' display then click 'Rented' in the bar at the top.

HT1420 looking at the 'help' to work out how to authorise new computer so can play songs, the instructions say - open itunes - go to store tab -locate 'authorise computer'- I cannot find the 'authorise computer' part !

looking at the 'help' to work out how to authorise new computer so can play songs, the instructions say - open itunes - go to store tab -locate 'authorise computer'- I cannot find the 'authorise computer' part !

You are looking at the drop-down menus at the top of iTunes e.g. on a Mac :
If you are on iTunes 11 on Windows then press Alt-S and the Store menu should appear at the top.

I have a new computer and downloaded the latest version of itunes.I now need to authorise my computer but cannot find the bar that contains " store windows help" any suggestions please?

i have a new computer and downloaded the latest version of itunes.I now need to authorise my computer but cannot find the bar that contains " store windows help" any suggestions please?

Press Alt or Ctrl+B.
tt2

I purchased Lightroom from B&H Photo a few months ago. I did not instal the software, because I was purchasing a new computer in the near future. I am now purchasing that computer, but cannot find the software. B&H suggested that I contact you directly

I purchased Lightroom from B&H Photo a few months ago. I did not instal the software, because I was purchasing a new computer in the near future. I am now purchasing that computer, but cannot find the software. B&H suggested that I contact you directly to help me. I have the receipt, and you can look to see that the program was never used. It would be great if you could just send me another copy of the software. Thank you very much.
Marc

Download from Adobe's website
Win: Adobe - Lightroom : For Windows
Mac: Adobe - Lightroom : For Macintosh
Install then enter your serial number when prompted.
I have the receipt, and you can look to see that the program was never used.
The receipt is only of use to B&H. Adobe will have no record of it.
If you quote an Adobe Lightroom serial number then Adobe can confirm if that serial number has ever been registered. That step should not be required at this stage though. Just install the software.

My computer can not find the airport device

I think I have tried everything, but my computer does not find the device in utilitys. The problem I have is that I-tunes does not find the speaker that is connected hvis mye airport express. But sometimes it works...
I have connected express to broadband and it is lighting green (my Zeppelin is working just fine with it). But when I start utilitys, does it not find the device.
What options do I have, what can I do different?
Thanks for all help I can get :-)
Mads

Hello
We still have the same problem...
Is there anyone out there who can help?
Thanks
Mads

Computer can not find the wifi internet

Goodmorning,
I have a mac book pro (with lion) and wifi internet at home. All of a sudden my computer can not find my network although it is available and working as an i pad and a mobile are working via this wifi network.
I tried 'create a network' and 'join other network' but it looks like the computer can not find the wifi network. My computer has internet access via cable, but just by plugging in the cable wihtout changing the settings (switching off the wifi).
Any idea what to do ?
Thanks

The Mac on cable uses Ethernet. Wi-Fi uses AirPort. Try and delete your Airport setting and re-enter your configurations again.

HT1338 My computer says it's connected to the internet, but I keep getting a message that my computer can't find the server.

My computer says it's connected to the internet, but I keep getting a message that my computer can't find the server. Could there be a problem with my computer's internet connection?

First, unplug the modem, for at least 10 secs., then unlpug you airport/ wifi/ then try to reconnect.
If it it does not not work, reconnect your modem, then reconnect your network utilites, use assistance.

PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"

HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradhar

Hi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420

Can't find the toolbar

Hello to the Community,
i'm new here so i have a (simple?) question.
I doesnt find the toolbar anymore (see picture).
I have since 2 years photoshop so i know a little bit about adobe programs, but i cant find it in dreamweaver CS6.
It shouldnt be so difficult, but i havnt found it and i hope that anyone can help me
Thank you

Hmh, because i thought that this toolbar looked realy similar to them.
I found a picture in the internet where the "toolbar" which im searching for is available (i dont know if i am allowed to post links but here it is)
http://techmites.com/wp-content/uploads/2012/10/21b.jpg
It should be this little bar on the left side.
Where you can e.g. create a new page.
So maybe it could really been hidden by myself...
but thanks

How to find the Version of CRM system

Hi All,
I have to install CRM system and I dont have any other information other than the EWA Report, Can any one let me know how to find the Version of CRM system and we dont have Java installed in it (Generally we check WEBCUIF but as we dont have Java I cannot see the Package). Can I go with the CRMUIF ?? .
I have Pasted the information of Support Package Maintenance, that is available in EWA Report.
BBPCRM
600
4
13
SAP BBPCRM Server
CRMUIF
600
4
17
SAPK-60004INCRMUIF
SAP CRM User Interface Framework
PI_BASIS
2005_1_700
16
26
SAP R/3 Basis Plug-In
SAP_ABA
700
16
29
SAP Application Basis
SAP_AP
700
13
29
SAP_BASIS
700
16
29
SAP Basis Component
SAP_BW
700
18
31
SAP Business Information Warehouse
ST-A/PI
01P_700
0
SAPKITAB7I
SAP Service Tools for Applications Plug-In
ST-PI
2008_1_700
6
8
SAP Solution Tools Plug-In
Please let me Know. Thanks in Advance.
Vijay

Hi,
Logically your Status bar should show that.
Login to gui. --> system -> Status
and then you should see the crm version in your Component version.
SAP CRM ABAP 6.0
You should go with
BBPCRM
600
Thanks
Rishi abrol

HT201272 Where do I get the serial number and product key for the version of AutoCAD LT for Mac that I bought from the ITunes store?

Where do I get the serial number and product key for the version of AutoCAD LT for Mac that I bought from the ITunes store?

The iTunes Store doesn't sell software for the Mac. I presume you mean the Mac App Store. To the best of my knowledge, no software sold in the Mac App Store has serial numbers nor product keys. For what reason do you think you need them?
Regards.

Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\120 registry key.

Dear Expert,
I setup SharePoint for 3 tiers, WFE, APP + DB Server.
I installed SQL 2014 reporting service Add-in on APP Server and already enable sql reporting service in DB Server. DB Server can do report server.
I follow the step : https://msdn.microsoft.com/en-us/library/jj219068(v=sql.120).aspx but I stuck in no.2, I cannot start the services, in picture below.
I checked the SSRS provision is disabled not online
Please help.

Hi MasterBird,
According to your description, when you register and start the Reporting Services SharePoint Service, the error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\120 registry key is thrown out.
As this
article say, if you use three-computer deployment, the first computer hosts an instance of a SharePoint product. The Reporting Services Add-in is installed on this computer. The second computer hosts SQL Server Reporting Services and the third computer
hosts an instance of the Database Engine.
Regarding the error message, it could cause by the Reporting Services – SharePoint feature and Reporting Services Add-in for SharePoint Products haven’t been installed. Please refer to articles:
SSRS SharePoint 2013 Create Service Application error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key Error
Installing SSRS 2012 in SharePoint Mode on SP2010
If issue persists, please check the error detailed information in ULS logs, and check Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log to see if any error occurred during set up. For more information, please refer to this article:
Troubleshoot a Reporting Services Installation.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Where on my computer do i find the location of the url and registry key for the toolbars on my system?

Similar Messages

Maybe you are looking for