Where Should I Set the Layer Break Marker?

I am burning to a Memorex DVD+R DL media------
I received this error message when burning:
"Formatting was not successful. Layer 0 exceeds the
maximum layer size allowed. Please choose a suitable
marker location that will support this condition."
I placed one approx halfway through my main sequence, which
is a total of 4.6 GB, but I am still receiving this message.
Where should I place the marker so I can successfully output?
My total project is about 6.2 GB.

So you are telling me that I could delete the DNS from each machine and set it in either the new modem or Time Capsule router.
That is correct!
I guess what I'm confused at is what device is doing what.
Let's look at a few examples, hopefully to help understand where all these protocols/services (PPPoE, DNS, & DHCP) come into play:
Scenario 1: Modem > Computer
In this scenario, your ISP provides the DNS server IP address information to your computer via DHCP. DHCP also provides the other important IP address information: IPv4 address, subnet mask, & router IP to your computer in order to communicate on the Internet.
Since your DSL ISP requires that you are authorized to access their Internet service, they utilize PPPoE to pass your account credentials (username & password) from your computer to their authorization server. Once verified, you are granted access.
Scenario 2: Modem > Router (Actiontec) > Computer
In this scenario, your Actiontec router provides your account credential (via PPPoE) to the ISP and also acts as a DHCP server. As a DHCP server, it provides your computer with the required IP addresses and passes on the ISP's DNS IP addresses as well. You do have an option with this router to enter a different set of DNS IP addresses ... like those for Google DNS or OpenDNS if you do NOT want to use the ISP's DNS servers. In this case, the Actiontec, uses its DHCP server to provide those addresses to your computer.
Scenario 3: Modem > Upstream Router (Actiontec) > Downstream Router (TC) > Computer
Since you have the TC configured as a bridge, it is basically a "pass-through" device. That is, the Actiontec will continue to provide the IP addresses just like in Scenario 2 "through" the TC so that wired or wireless clients connected to the TC get the addresses. Also, like in Scenario 2, you can assign DNS IP addresses on the TC ... and these would be provided to clients connected to it.

Similar Messages

Setting a Layer Break for GEAR Pro Mastering Edition with EncoreDVD & IFOEdit

Setting Layer Breaks Manually for Encore/GEAR Projects
Although we can write straight to a DVD+R DL disc directly out of EncoreDVD 2.0 and we can also create our Master DLT tapes directly out of EncoreDVD 2.0 also, there are times when these options simply are not sufficient.
For example - we wish to Verify the successful writing of a DLT Tape, or we wish to create a QC disc for our clients in DVD-R DL format.
Either way, the "option" of using a +R DL disc is often unacceptable.
Another very good reason for +R DL discs to be NFG is that they are NOT DVD-Video format, and as such tend to expect the layers 0 and 1 to be of equal size.
Yet another reason could simply be we are using EncoreDVD 1.01, which does not support direct writing of any DL discs at all.
The solution is to use GEAR Pro Mastering Edition to create your DLT or DVD-R DL disc directly from your Encore project instead.
And here's how you do it.
You are going to need copies of both GEAR Pro Mastering Edition, EncoreDVD (any version) and finally a copy of the freeware application IFOEdit http://www.ifoedit.com/. Additionally, we will also need the GEAR Layer Break Calcuulator, provided for free on their excellent support site at http://www.gearsoftware.com/support/documentation/layerbreakcalculator.xls
Now we are ready - lets look at how it is all done. Don't be put off by what looks like a lot of math here either - this gets easier every time you do it and all it takes is a little common sense and practise.
The best way to proceed is to use EncoreDVD to build your project to a folder. This will not make any Layer Break settings at all, and will allow us to create a new DL Project in GEAR and also allows GR+EAR to build the UDF/ISO structure for us.
So once we have written our tested and checked project to a folder, the next step is to close out of EncoreDVD and launch GPME. By the way - if you're not certain that you need the expense of GPME for a one-off project you can simply download their 30 day trial version and use this as it is 100% fully functional in every way - there are no limitations at all.
When GEAR loads, select to create a new DVD-Video project and be certain you tick the DVD9 box in this screen too. Another window will appear now asking you to locate the folder where the Video_TS files are stored. Point this at the Video_TS folder and GEAR will create a basic DVD9 project for you.
Next we need to load up the Excel Spreadsheet with the Layer Break Calculator we downloaded earlier. I always use a different machine for this as I don't have Office installed and any open source application that can read an XLS file will do the job. If you don't have one, I recommend either OpenOffice or Star Office to do this. There are a lot of helpful calculators in XLS mode, and you won't regret it. Just try to keep all this stuff well clear of your authoring system though. But I am rambling, and I'm sorry. Back to buiness.
Once we have loaded up our Layer Break Calculator, we need to enter in some numbers.
Back over in GPME, where we have our shiny new DVD9 project sat there waiting for instructions, there is a file structure on the lower left hand side of the project screen. Att the top of the list we should see something very much like "VOLUME (projectname) (DVD-Video ISO/UDF)"
Right-click on this, and select "Properties". A screen will appear with all sorts of numbers in it, and we ignore the lot of them except for the "Total Volume Size in Sectors" - which we need to write down, nip across the room to our spreadsheet, and type the number in right at the top where it says "Total Volume (project) Size"
Another set of (probably) meaningless numbers appears - and the 2 we are interested in here are the ones where it says "RULES" and specifically "Layer Break Point must be Greater than .....
And Less than.....
Write these 2 numbers down, and hop smartly back across to where we have our GEAR project open on our authoring machine. Or simply minimize the spreadsheet if we are doing all this on the same system.
We now need to click on the folder marked "Video_TS" in the bottom left of the GEAR screen, and on the lower right we need to click once on the bar in the middle above all the VOB files marked "start sector" to arrange all the files in the sequence they will be on the disc. This makes finding our VTS file so much easier.
Somewhere in that list there will be a file that has that range of numbers in it. If we are really lucky, there will be more than one, which means that one of these will soon become our Layer Break.
When we have identified the correct file, take a note of it's name - it will be VTS_01_4.VOB or something with a similar structure name wise.
Next, we need to write down and enter into the Layer Break Calculator the start sector number of the VTS_xx_1.VOB file that holds our values.
I will try to explain why. If our Sector range is to be found in the example we gave earlier, say VTS_01_4.VOB, we need to note the start sector of the file VTS_01_1.VOB. This is because all these VTS_xx_x.VOB files are all extensions of the same file. They are just in handy blocks so that the Computer can keep track of them without breaking any rules about file sizes. Anyway, we write down the Start Sector of the file VTS_xx_1.VOB where xx is the file where the Layer Break range is to be found.
Just to try & make the concept clear, if the range were found in the file VTS_05_5.VOB, our start sector we need to write down is VTS_05_1.VOB
Enter this into the Calculator/Spreadsheet in the place where it says "Chosen Video Object VTS_xx_1.VOB Start Sector.
Now this will tell us exactly where we need to look next, and tell us we now need to hunt for a cell start sector between a range of sectors.
It might be something like "1,148,678 and 2,051,052" sectors.
This is where IFOEdit comes in.
Launch IFOEdit - and you may as well go back to GEAR, and close the project - but not the application. Go to the "File" menu, and from the drop dow select "Delete GEAR Project" and delete the one we just created, as we will need to change it anyway. Why you will find out later on.
From IFOEdit, you will see 2 halves of a screen. Down the bottom left there is an "Open" button. Click on this and locate the Video_TS folder, and specifically the file VTS_xx_1.IFO, where xx is the file we know from earlier the Layer Break will be placed.
Immediately your head will start to ache, your eyes will glaze over & your brain will wave a little white flag, as some serious mathematics suddenly appears (Well, that's what happened to me the first time. I was too fascinated to be confused - sheer bewilderment is perhaps the best expression. And I still don't know what most of it is for.
The one we are interested in can be found in the upper half, and is called "VTS_PGCITI".
Click on this, and a lot of little others will appear immediately below it.
You will see VTS_PGC_1 and so on until you run out of blocks.
The odds are high our layer break will be in the longest file - but this does not always hold true, so we start at the top & work our way rapidly down. What we are looking for is twofold.
1 - A Cell Start Sector within our range defined earlier.
2 - A cell Start Sector flagged as "NON Seamless playback.
If we can fill both these criteria, we have our layer break.
Write this number down, and enter it into our spreadsheet - and close down IFOEdit as we are done with it for today.
Back in the Spreadsheet we are almost done. Once we enter this number in, it will helpfully calculate exactly where in our Virtual image from earlier that sector lies, and will check to see if it is divisible by 16. Don't worry for now why, just know that it has to do this.
The chances are high it will not be, so the spreadsheet will tell you how many sectors the whole image has to be shifted forwards by, and what the new Cell Start Sector is in this revised image. This is automatic, and you get 2 figures.
1 - Offset. This number will be between 0 and 15.
2 - Layer Break Sector.
Time to go back to GEAR, and in our "Options" drop-down menu we will have another one called "Preferences". In this, we need to tell GEAR to ask us for the start sector to be entered for each file.
Now we create our project again - but this time GEAR will ask us for the start sector of VIDEO_TS_IFO, and the figure 640 will be highlighted.
Add our offset figure we were given earlier to this so if our offset was 11, enter in 651.
GEAR will do all the rest automatically for you.
One more job to do now.
Go Back to "Options/Preferences", and under DVD we need to tell GEAR we are changing the Layer Break. Click on the "Change" button, and use the up/down arrows to arrive at our newly discovered Layer Break Value.
Save the project - we're done. And write down that offset & Layer Break whatever you do.
You can now write to DVD-R DL, DLT tapes (and if you right-click on your DLT drive in the lower "Devices" screen, and choose "Properties", you can tell GEAR to verify the tape after writing too. It will write both layers first, then verify each one.
There is, however, a minor "GOTCHA" in GPME when writing DLT tapes.
It is allowed to set the IDENT.TXT file to be included on the DLT tape by means of a tick box. However, as this file is not actually required for replication in DVD-Video, but only in DVD-ROM - GEAR will not include the file
i even if the box is ticked
but it
i does
add a pointer to the file in the DDPID file instead. The upshot of this is that a DLT tape where IDENT.TXT has been selected to be included will be
i rejected by the factory as unusable.
This is because when they try to verify the DDP image on the tape it will fail as IDENT.TXT is NOT on the tape.
You must ensure this box is NEVER TICKED - I fell for this one recently, and had to rework 7 DLT tapes.
There is yet another way to get a DL project to the factory if you do not have a DLT machine, and do not have access to DL discs in the correct format.
Write the DDP images to 2 single layer discs instead!
This requires the use of GEAR Pro Mastering Edition again, and is incredibly easy to do.
What you need to do here is follow the original guides in the FAQ sections for setting the Layer Break manually, but instead of writing the project to DLT tapes or to DVD-R DL/DVD+R DL media, what we do next is write the project to a DDP file on the HDD instead.
This will result in 2 folders appearing - Layer 0 and Layer 1.
Each of these has the necessary information for the replication plant to manufacture the discs - all we need to do is get them onto 2 discs instead of 2 DLT tapes.
This is simplicity itself.
Launch your burning application.
Create a new DVD-ROM project.
Name it (Project)_Layer_1
Broswe to the 2 folders with the DDP files in them, and add the contents in this exact order
DDPID
CONTROL.DAT
IMAGE.DAT
(Checksum.txt - optional)
(Log file - optional)
Burn the disc.
Repeat for Layer 1.
That is all there is to it.
What will happen at the factory is the Eclipse verification system will look for the DDPID file at the root level of the disc. If it cannot find it, it will assume it is dealing with a standard DVD-ROM disc instead, but if it is there it will know what is going on, load the files, and ask for Layer 1 after it has finished in the normal manner.
I hope this helps out - if not, please post in the main forums, and I'll try to help out.

Hi Ryan,
Yes, you'll only get the LB sector number when you format with one of the "tape images" (go with DDP 2.0). And unfortunately, Gear doesn't allow transfer of DDP or CMF Images to DLT.
Gear is working on a version that will incorporate DVD-9 making within the program.
Meanwhile, If you go with the instructions on their site to create a DVD-9, be sure to add: "correct VTS sectors" in the VIDEO_TS folder with IFOEdit, and set the region info in the VMGM_MAT to "0"; and be sure to flag all instances of a cell properly for the layer break, in the case they reside in any Stories that span the Layers.
But if I may; It's highly recommended that you hire out tests on the resulting DDP image to make sure the layer break did indeed fall where you expected, and that there are no other issues (Same goes with any DDP image destined for replication, created by any other program).
Or better yet, consider hiring someone to premaster for you (I wonder who? , who also includes navigation proofing, spec compliance testing (MEI and sometimes with a player bank) and verifying the finished Image (EclipseSuite); all for one low fixed price, i.e. no charge in the event a resubmission to me is required (pre consultation, also included, nips lots of common mistakes in the buds). This insures that only a bullet-proof Image is finally sent in to the replicator.
There I go with commercials again! But for sure, Gear's current DVD-9 method is not for the faint of head; and premastering in general, is not the innocuous activity it appears to be. Real trouble eventually awaits (unless measures are taken), due to the nature of the critter.
Take care,
Trai

Where can i find the option "no marker Update"

Hi ,
i want to know where this No marker update option is?
Thanks in advance
Ravi

hi ravi..
In the context menu of cube >Manage>Compression tab, u will find this check box.
It holds the non-cumulative value(like stock balance).
If you choose this option when compressing Non cumulative cube; the reference point is not updated but the request are moved to Request 0(usual compression); you must do this for compressing historical data; for example use this option to compress data before Jan 2005.
Marker updates do not summarize the data. In inventory management scenarios, we have to calculate opening stock and closing stock on a daily basis. In order to facilitate this, we set a marker which will add and subtract the values for each record.
In the absence of marker update, the data will be added up and will not provide the correct values.
Compression makes the stock calculation(updation) as on the last date for which the records uploaded.So it is nothing but doing calculation inadvance rather the making system to do this calculation at the time of query execution.
The same explained in the how to handle inventory in BIW in better way with example.
If we donot do this compression of delta loads, the result does not be wrong but system takes more than time to do forward and then backward calculation.
For non-cumulative InfoCubes, you can ensure that the non-cumulative marker is not updated by setting the indicator No Marker Updating. You have to use this option if you are loading historic non-cumulative value changes into an InfoCube after an initialization has already taken place with the current non-cumulative. Otherwise the results produced in the query will not be correct. For performance reasons, you should compress subsequent delta requests.
See:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
When you load historic non cummulatives you need to set the "No Marker Updating" indicator if initalization has already taken place otherwise your data will be erroneous.
chk this thread too..
No marker update
hope it helps...

When i'm building dual layered dvds, the layer break is causing the dvd to skip to the beginning of the next chapter.

when i'm building dual layered dvds, the layer break is causing the dvd to skip to the beginning of the next chapter.

I would echo everything John just said - especially (and this is really important) that part about setting burn speeds to the minimum.
Do not worry about doing this as IMGburn will automatically adjust upwards to the minimum burn speed actually supported by the media/burner combination.
@danielrow.
How are you currently setting your layer break please, and what OS are you running?
If on a PC there is a fantastic tool called PGCEdit that is a swiss army knife and moreover something no authoring house should be without.......

Where should i call the rfc function module? in xi or in r/3

where should i call the rfc function module?
for the synch scenario: file < -- > xi <---> rfc
i know the type of rfc is tcp/ip; but i'm not sure with the followings,
and with some trials i can not even see any message via rwb even all the setting
can be activated without errors.
where should i create the rfc destination? in r/3 or xi
where should i call the rfc via abap program? in r/3 or xi
i guess the calling program should belong to the different server with the rfc itself....
so confused....
Thanks for your reply!!
Jun

if i create the destination in xi point to r/3, then i call the rfc use the destination in r/3 right ?
The call doesnt use the destination in R3. XI has the RFC destination which is just used to connect to the R3 system
but where i need to create the fm via se37? in xi or r/3 ?
In R3
Regards,
Prateek

Where should I set up my FTP server if I have no money to spend? I would prefer if someone answers this quickly as I want this site up and running soon.

Where should I set up my FTP server if I have no money to spend? I would prefer if someone answers this quickly as I want this site up and running soon.

Ethmoid is right... There ARE free web hosts, but... as the old saying goes "You get what you pay for" and if you pay nothing?
Most free web hosts are riddled with ads, and some are even hosts to malware. DO YOUR RESEARCH before committing to anything.
While some ISP's do provide free hosting, there are limitations with many of them, such as monthly bandwidth and file storage. You may not be able to get your whole site upto the server (depending on how big it is), or it may be down several days a month due to "excessive" traffic. Again - DO YOUR RESEARCH before committing to anything.
There are also a lot of services that run in the range of $4-7 a month for feature filled, bandwidth enabled hosting. Dreamhost is offering two domains for $3.95 a month right now. I use ICDSoft (have since 2003) and they're $7 a month, but they offer a lot for that.
Lastly, you want to look at SUPPORT. If your site goes down, and your "free" host is nowhere to be found.... It's as bad as having no site at all, if you cant get it fixed and no one can access your URL for days on end.

Mail&Exchange, where can i set the sync period for mails?

Hello everybody!
Where can i set the sync period for my mails with an exchange account? At the moment, i can only see the mails since january, i need to see all of my mails since 2010...
Thanks!
Greets
Jan

first you make a bookmark for WINDOWS LIFE MAIL:
https://support.mozilla.com/en-US/kb/how-do-i-use-bookmarks#w_how-do-i-create-a-bookmark
then you can make a shortcut of it(drag it) where you want it:
https://support.mozilla.com/en-US/kb/Sorting%20bookmarks#w_rearranging-manually
add bookmark to toolbar:
http://support.mozilla.com/en-US/kb/Bookmarks%20Toolbar#w_add-bookmarks-to-the-bookmarks-toolbar
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Where do I set the polling frequency for Technical monitoring in Solution Manager 7.1 SP10 ??

Hi All,
I am customizing my technical monitoring templates and would like to know :
1. Where we can set the polling frequency for each metrics for triggering alerts through Technical monitoring in Solution Manager 7.1 SP10 ??
2. Is it like each time our threshold is breached, it will send an alert irrespective of polling frequency ??
I know the data collection interval time for each metrics in technical monitoring template but the as per my observation the polling frequency is different.
Need your guidance.
Regards,
Manish K

Hi Javier,
Refer to the documentation 'MAI Alert Consumer BAdI Interface' under
http://wiki.scn.sap.com/wiki/display/TechOps/Alert+Consumer+BAdI+Interface link for information on the input to the BAdI.
Kind regards,
Roland

Where can i set the location of the LogonTicket cookies in the visual admin

hello:
where can i set the location of the LogonTicket cookies in the visual administrator?
thanks!!

Hi,
When the SAP LOGON ticket Expired or if we need to update the dates, it is generally done at the Visual Administration Level. SAP Logon Ticket is represented as cookie in the Browser which will help us for SSO.
In Visual Admin under keystore admin where our Old Portal certificate exists.
We will need to delete the old portal certificate, then we need to generate new ceritificate and a pop box will appear.. where we need to provide our System details like SID, Client. After these details are given we can get a new certificate in which validity period dates are automatically generated. And also we can import teh same into Portal at Sys Admin->sys config->key store admin for it to be available as .PSE or .DER file for SSO.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/59bba290-0201-0010-468b-cd12efda573a
check the above for EP security guide which might help you in the same.
Regards,
Ravi

Where should i put the DEFAULT&SMARTBAR

Hello,
where should i put the DEFAULT&SMARTBAR ? and the main Menu ?
in order to be shown in each form..
in using Forms 6i.
Regards,
Abdetu..

Hello Gerd,
Thanks for reply..
put such things into *a reference form* what is meant by a reference form do u mean the main form?
Create a property class (PC) for your FORM-MODULE-properties,
put this PC into the reference form.
Create there an object group (OG), put the PC into the OG and the inherit the OG to your local form.
Automatically you have then the PC inherited too.i did all what u mentioned..
Bbut the problem is that the DEFAULT&SMARTBAR
can't be seen in allllllllllll my forms in the main menu inspite of i put it into the form module property ->in the intial menu property.
Regards,
Abdetu..

Where should I change the adapter? It doesn't work from the start.

where should I change the adapter? It doesn't work from the start. But there is no apple store in our city.

The phone does not charge when linking with adaptor. But it is OK when linking PC using USB instead. I do not know why, but I am just sure there is something wrong with the adaptor.

How should I set the iMac display in normal mode

how should I set the iMac display in normal mode

Not certain if this is what you're asking, but the normal setup would be System Preferences>Displays>Disply tab and select 'Best for display'.

Where can I set the window dimensions for the "Java Applet window"?

Hi,
When I run a form on the web, the Java Applet is loaded and the form appear in the window. But "base window" have gived dimensions indifferent what dimensions has the window of the form which I run.
So, where can I set the dimensions of the "core window" which is behind the MDI window of the application?
Thanks in advance,
Eugen

Eugen,
in formsweb.cfg you will find parameters "width" and "height". You can set absolute values in pixels or "relative" in percent.
width=800
height=600
or
width=100%
height=100%
Gerald Krieger

The new event are created when i import photo in the top. Before they where put in the end. All my event are classified. Where i can set the event at the end ? Thank's.

The new event are created when i import photo in the top.
Before they where put in the end.
All my event (around 600) are classified on the top the old and a the end the new.
Where i can set the event at the end ?
Thank's.

View menu ==> sort events
LN

Where should I have the create table

I am making an application which it has a customer, an order and a food objects.
I know that I can do it in one class (which will have main inside) but I am trying to make it as object oriented..
so.. I have to make a class for a customer, a class for food, and I will handle all this in another class which will have main method..
am I right up to here??
if yes I was now wondering where should I have the sql statment about creating the table.. my thought is to have it at the constructor so when I will make a customer object the table will be created..
then I will have an add_data(d1,d2,d3,d4....) method where I will insert the data to my database for each customer.. actually only one time I will make a customer object from main and then through this I will call add_data() method to add customers to my database..
Am i thinking right or I am too far away from what I must do...?
Thx

Doesn't particularily matter given that the application is small.
However in larger applications the database is created outside of the application usually using a SQL script.

Where Should I Set the Layer Break Marker?

Similar Messages

Maybe you are looking for