Where to assign HU in Ware house management
I am trying to create tranfer order from inbound delivery with Handling unit.
I am getting error message PUTWAY FOR HANDLING UNIT FOR STORAGE TYPE 001 IS NOT POSSIBLE.
i have tried to enable the storage unit managemet SUM for storage type 001. System is not accepting the switch on of SUM.
Can any body know how to solve this problem. where to assign the HU in warehouse.
Hi ,
Is your storage location an HU managed storage location, you create Handling units only in HU managed storage locations.
For linking Storage location to HU please find the path below
Spro --> logistics general -->Handling Unit Management --> Basics --> Material Management -->Inventory Management --> HU requirement for storage location
Regards
Krishna
Similar Messages
-
Lean ware house management screen shots
Hi sd gurus,
now my client is having requirement of lean ware house mgmt ,can any one send me screen shots for configuration process
to my mail id [email protected]Hi Srini,
Please find the complete notes on Lean Ware House Management System below:
A09 Lean Warehouse Management: Configuration Guide
Purpose
The purpose of this document is to describe the general configuration steps required to manually set up the configuration within the system landscape that has already been installed using the corresponding installation or configuration guides for installation.
The Configuration Guide describes how to set up the configuration of a Building Block manually, without the support of automated configuration tools.
Preparation
1.1 Prerequisites
The following building blocks form the basis for all mySAP All-in-One Automotive, High Tech and Industrial Machinery and Components solutions. You only have to install these building blocks once.
Building Blocks Comment
Baseline Building Blocks (Layer 0)
J00 - Essential Information
J02 - Organizational Structure
J03 - Financial Accounting
J08 - Controlling
J05 - Materials Management
J04 - Sales and Distribution
Baseline Building Blocks (Layer 1)
J06 - Production Planning and Controlling
J07 Quality Management
J18 - Product Cost Controlling
J19 Batch Management
J20 - Cost Object Controlling Make-to-Order
J21 - Cost Object Controlling Make-to-Stock
J17 - Profitability Analysis
J14 - Human Capital Management
J09 - Travel Management
Industry generic Building Blocks
E04 - Supplement Settings
E05 - Master Data HT / IM&C
Configuration
1.2 Lean WM Basic Settings
1.2.1 Defining Control Parameters and Number Ranges for the Warehouse Number Defining Control Parameters for the Warehouse Number
Use
A warehouse number is an organizational unit in Logistics, which organizes the company from the perspective of Warehouse Management.
In the Warehouse Management System, you can define a variety of control parameters at warehouse number level.
Procedure
1. Access the activity using one of the following navigation options:
IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM  Define control parameters and number ranges for the warehouse number Define control parameters and number ranges for warehouse no.(double click)
Transaction Code SM30
2. Find the Field Name and input the relative value into the field.
Table V_T3002
Field name Value R/O/C Description
Whse number L01 R
Warehouse no. description Lean WM BP01 R
Weight unit KG R
Volume unit
Default UoM K R
Time unit/performance data
Lean WM active X R
Link to subsystem active
Performance data
Transfer order 01 R
Group number 01 R
1.2.2 Defining Storage Type
Use
A warehouse number is subdivided into a variety of storage types. A storage type is defined by its physical or organizational features (for example, high rack storage area, bulk storage, and goods receipt areas).
A storage type has a short description rather than an address.
Before you can implement Lean WM, you must configure the following settings:
1. Assign a (newly defined) storage location to a warehouse number.(This step is defined by step 3.12 Control Plant / Storage Location / Warehouse Number Assignment
2. You should set up at least three storage types:
 a storage type (that will be used as a source storage type) with one or several fixed storage bins
 a goods issue area (as destination storage type) for deliveries
 an interim storage area for differences
Procedure
1. Access the activity using one of the following navigation options:
IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Storage type
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_T3012
Data record 1:
Field name Value Sub-screen
Whse number L01
Warehouse no. description Lean WM BP01
Storage type 001
Storage type name Fixed bin storage
Stock plcmt requires confirmation for putaway control
Unit of measure type srch
Stock rmvl requires confirmation for picking control
Unit of measure type srch
Data record 2:
Field name Value Sub-screen
Whse number L01
Warehouse no. description Lean WM BP01
Storage type 916
Storage type name Shipping area deliveries
Stock plcmt requires confirmation for putaway control
Unit of measure type srch
Stock rmvl requires confirmation for picking control
Unit of measure type srch
Data record 3:
Field name Value Sub-screen
Whse number L01
Warehouse no. description Lean WM BP01
Storage type 999
Storage type name Differences
Stock plcmt requires confirmation for putaway control
Unit of measure type srch
Stock rmvl requires confirmation for picking control
Unit of measure type srch
Data record 4:
Field name Value Sub-screen
Whse number L01
Warehouse no. description Lean WM BP01
Storage type 902
Storage type name IN-ZONE
Stock plcmt requires confirmation for putaway control
Unit of measure type srch
Stock rmvl requires confirmation for picking control
Unit of measure type srch
1.2.3 Defining Doors
Use
In a WM-managed warehouse, you can define dock doors (also known as doors or gates). A door is a location where the goods either arrive in the warehouse or leave it.
You can assign different functions to a dock door, for example:
Goods receipt
Goods issue
Other transactions such as cross-docking and flow-through
Procedure
1. Access the activity using one of the following navigation options:
IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM Define Doors
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_T30B
Field name Value R/O/C Description
Whse no. L01 R Warehouse number
Door A01 R Door for warehouse number
Text for door Door A01 R Text for door
Staging area
Matl stag. area txt
GI indic. X R Goods issue indicator
GR ind X R Goods receipt indicator
CD ind Cross-docking indicator
FT ind Flow-through indicator
1.2.4 Defining Material Staging Areas
Use
A staging area is an interim storage area for goods that have been received from goods receipt and afterwards need to be transferred into the warehouse.
It is also an interim storage area for goods that were picked in a warehouse and are to be loaded for goods issue through loading ramps or doors.
You can assign different functions to a staging area:
Goods issue
Goods receipt
Procedure
1. Access the activity using one of the following navigation options:
IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Material Staging Area
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_T30C
Field name Value R/O/C Description
Whse no. L01 R
Staging area A01-01 R
Matl stag. area txt Zone 1 R
Door A01 R Door for warehouse number
Text for door Door A01 R
GI ind X R Goods issue indicator
GR ind X R Goods receipt indicator
CD ind Cross-docking indicator
FT ind Flow-through indicator
HU ind Handling unit indicator
1.2.5 Defining Picking Area
Use
A picking area is an object within a storage type that groups together storage bins for purposes of stock removal.
Procedure
1. Access the activity using one of the following navigation options:
IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM Define Picking Area
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_T30A2
Data record 1:
Field name Value R/O/C Description
WhN L01 R Warehouse number
STy (storage type) 001 R
PAr (Picking area) 001 R
Picking area name Picking area 1 R
Data record 2:
Field name Value R/O/C Description
WhN L01 R Warehouse number
STy (storage type) 001 R
PAr (Picking area) 002 R
Picking area name Picking area 2 R
1.2.6 Defining Transfer Type
Use
In Lean WM, the transfer type "A" (stock removal) is required for movement type control.
Procedure
1. Access the activity using one of the following navigation options:
IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Transfer Type
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_T333A2
Field name Value R/O/C Description
WhN L01 R Warehouse number
Transfer type A R
Text f. shipment type Pick R
1.2.7 Defining Movement Types
Use
The SAP R/3 System uses movement type to process movements in Inventory Management (for example, goods receipt for a purchase order or goods issue to a cost center). When the system recognizes a movement as being relevant for Warehouse Management, it assigns this movement to a WM movement type by means of a table.
The movement type for the Warehouse Management System provides the information required for stock removals or picking:
 Interim storage bin
 Fixed bin coordinate
 Control indicator for processing, confirming, and printing transfer orders
 Confirmation info
Procedure
1. Access the activity using one of the following navigation options:
IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Movement Type
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_T3332
Data record 1:
Field name Value R/O/C Description
Warehouse number L01 R
Warehouse no. description Lean WM R
Movement type 255 R
Movement type description Goods Issue general R
Src 001 R
Src Stor. Bin
Dest 916 R
Dest Stor. Bin
Transfer type A R
Text for transfer type TRATX Pick R
TO creation screen 2 R
Scr. TO confirmation 2 R
Manual TO creation not allowed
Transfer priority
Print code
TO item can be confirmed immed.
Propose confirmation
Data record 2:
Field name Value R/O/C Description
Warehouse number L01 R
Warehouse no. description Lean WM R
Movement type 601 R
Movement type description Picking by delivery note R
Src 001 R
Src Stor. bin
Dest 916 R
Dest Stor. bin
Transfer type A R
Text for transfer type TRATX Pick R
TO creation screen 2 R
Scr. TO confirmation 2 R
Manual TO creation not allowed X R
Transfer priority
Print code 02 R
TO item can be confirmed immed. X R
Propose confirmation
1.2.8 Defining Difference Indicator
Use
Using the difference indicator, you can classify your differences. This indicator is used in Lean WM for evaluation purposes only.
Procedure
1. Access the activity using one of the following navigation options:
IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Difference Indicator
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_T3362
Field name Value R/O/C Description
WhN L01 R Warehouse number
DiffInd (difference indicator) X R
Description of difference indicator Stock difference R
Stor.ty.differences 999 R
Diff.bin
TO X R
Source bin
1.2.9 Control Plant / Storage Location / Warehouse Number Assignment
1.2.9.1 Assigning Warehouse No. to Plant-Storage Locations
Use
By doing so, system can recognize which storage locations in Materials Management are controlled by the Warehouse Management system (LE-WM); you must assign the plants and the storage location to the warehouse number.
Procedure
1. Access the activity using one of the following navigation options:
IMG Menu IMGEnterprise Structure Assignment  Logistic Execution  Assign warehouse No. To plant/storage Location
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_T320
Field name Value R/O/C Description
Plant BP01 R
SLoc 0005 R
WhN L01 R
1.2.9.2 Control Plant / Storage Location / Warehouse Number Assignment
Use
You can control for each combination of plant, storage location, and warehouse number whether Lean WM or standard management of bin inventory is to be selected.
If you are using Lean WM, you can also specify a picking storage type that is used for creating transfer orders.
Procedure
1. Access the activity using one of the following navigation options:
IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM  Control Plant / Storage Location / Warehouse Number Assignment
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_T3202
Field name Value R/O/C Description
Plnt BP01 R
Stor. loc. 0005 R
WhNo (Whse number) L01 R
Degree of activation Warehouse Mgmt 1 R
Stor.type for picking in Lean WM 001 R
1.2.10
1.2.11 Assigning Picking Location
Use
Assign the picking locations to the combinations of shipping point and storage condition for every plant.
Procedure
1. Access the activity using one of the following navigation options:
IMG Menu IMG  Logistic Execution  Shipping  Picking  Determine Picking Location  Assign Picking Location
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_TVKOL
Field name Value Description
ShPt BP01 Plant
Plnt BP01 Shipping point/receiving pt
SC K1 Storage conditions
SLoc 0005 Storage location
1.3 Print Control for Warehouse
Use
Print control defines the following:
Which slips are to be printed for the movements (that is, for the transfer orders) within the Warehouse Management System
How these slips are to be printed (that is, which forms are to be used, how many copies are to be printed)
On which printer a slip is to be printed automatically
And print control manages the print operations of the warehouse. This flexibility involves a certain degree of complexity with regard to the parameterization.
Procedure
1. Access the activity using one of the following navigation options:
IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Print control
Transaction Code OMLV
2. Choose the following button and check the contents
(Here only the contents of the warehouse no. L01 are listed):
2.1 Spool code
Data Record 1
Field name Value R/O/C Description
WhN L01 R Warehouse number
Spool 01 R Spool request name
Copies 1 R Number of copies
Title LVS1 R Spool control data
Print_immed. X R Print immediately
Delete_after_print X R Release after output
NewSplReq__ New spool request
Data Record 2
Field name Value R/O/C Description
WhN L01 R Warehouse number
Spool 02 R Spool request name
Copies 1 R Number of copies
Title LVS2 R Spool control data
Print_immed. Print immediately
Delete_after_print X R Release after output
NewSplReq__ New spool request
2.2 sort profile/collective process
Field name Rec1 Rec2 Rec3 Rec4 Rec5 Rec6 Rec7 Rec8 Rec9
WhNo_(Whse_number) L01 L01 L01 L01 L01 L01 L01 L01 L01
Sort_profile 1 2 3 4 5 6 7 8 9
1st_sort_criterion SPOOI SPOOI SPOOI SPOOI SPOOI SPOOI SPOOI SPOOI SPOOI
Sort_descending_order (1st_sort_criter.)
Control_break_1st_sort_criterion
2nd_sort_criterion LDESI LDESI LDESI LDESI LDESI LDESI LDESI LDESI LDESI
Sortdescending_order (2nd_sort_crit.)
Control_break_2nd_sort_criterion X
3rd_sort_criterion REFNR REFNR REFNR REFNR FORMI FORMI FORMI FORMI REFNR
Sortdescending_order (3rd_sort_crit.)
Control_break_3rd_sort_criterion X X X X
4th_sort_criterion FORMI FORMI FORMI FORMI LGNUM LGNUM LGNUM LGNUM FORMI
Sortdescending_order (4th_sort_crit.)
Control_break_4th_sort_criterion X X X X
5th_sort_criterion LGNUM LGNUM LGNUM LGNUM VLTYP VLTYP VLTYP VLTYP LGNUM
Sortdescending_order (5th_sort_crit.)
Control_break_5th_sort_criterion
6th_sort_criterion VLTYP NLTYP VLTYP TANUM VLPLA NLPLA WERKS TAPOS NLTYP
Sortdescending_order (6th_sort_crit.)
Control_break_6th_sort_criterion X X X X
7th_sort_criterion VLPLA NLPLA WERKS TAPOS
TANUM TANUM LGORT KOBER
Sortdescending_order_ (7th_sort_crit.)
Control_break_7th_sort_criterion X
8th_sort_criterion TANUM TANUM LGORT TAPOS TAPOS MATNR VLPLA
Sortdescending_order (8th_sort_crit.)
Control_break_8th_sort_criterion
9th_sort_criterion TAPOS TAPOS MATNR CHARG TANUM
Sortdescending_order (9th_sort_crit.)
Control_break_9th_sort_criterion
10th_sort_criterion CHARG BESTQ
TAPOS
Sortdescending_order_ (10th_sort_crit.)
Control_break_10th_sort_criterion
11th_sort_criterion BESTQ SOBKZ
Sortdescending_order_ (11th_sort_crit.)
Control_break_11th_sort_criterion
12th_sort_criterion SOBKZ LSONR
Sortdescending_order_ (12th_sort_crit.)
Control_break_12th_sort_criterion
13th_sort_criterion LSONR VLTYP
Sortdescending_order_ (13th_sort_crit.)
Control_break_13th_sort_criterion
14th_sort_criterion VLTYP
Sortdescending_order_ (14th_sort_crit.)
Control_break_14th_sort_criterion
15th_sort_criterion
Sortdescending_order_ (15th_sort_crit.)
Control_break_15th_sort_criterion
2.3 print code
Field name Rec1 Rec2 Rec3 Rec4 Rec5 Rec6 Rec7
WNo___(Warehouse_number) L01 L01 L01 L01 L01 L01 L01
PrCd__(Print_code) 01 02 03 11 12 21 22
Print_code_description
Find_shipping_data____
Determine_production_data_
Form_ LVSTAEINZEL LVSTALISTE LVSTOSOLO LVSTAEINZEL LVSTALISTE LVSKOMMIL1
LVSKOMMIL2
PTm_(Time_of_printing)________
Sort_profile 1 1 1 4 1 1
Combined_print x x x x
Spool_data 02 02 01 02 02 02 02
Label_form LVSLABELS
Label_spool_code 01
Quantity_of_labels_(Indicator) 2
2.4 assign printer to storage type (LP01 to 001 only)
Field name Rec1 Rec2 Rec3
WhNo_(Whse_number) L01 L01 L01
STy__(storage_type) 001 916 999
Storage_type_description Fixed bin storage Shipping area deliveries Differences
Printer
2.5 assign print code to movement type
Field name Rec1 Rec2 Rec3
WhNo_(Whse_number) L01 L01 L01
MvT__(WM_movement_type) 101 255 601
Movement_type_description Goods receipt for pur.or.
Picking by delivery note
PrCd__(Print_code) 01 02
2.6 assign print report to warehouse No.
Field name Rec1
WhNo_(Whse_number) L01
Warehouse_number_descrip. Lean WM Plant BP01
Print_report RLVSDR40
2.7 print control multi-processing
Field name Rec1
WhN L01
Ref.ty. L
Status 2
Print_prog. RLKOMM40
PrCd 21
Printer LP01
1.4 Manual Activity
1.4.1 Maintaining Number Range Intervals for Transfer Order
Use
Maintain number range intervals for transfer order
Procedure
In this step, you define that, the Number range for Transfer order as 01 and Group number as 01, now you should tell the system how the number range would like for 01 as transfer order and 01 for the group number, for both number range, you may define you own number range, the following information just for reference:
Access the activity using one of the following navigation options:
IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM  Define control parameters and number ranges for the warehouse number  Maintain number range intervals for transfer orders (double click)
Transaction Code LN02
Check if the internal number range 01 (0000000001-1000000000) has been defined
Once you have defined your number ranges, it is extremely difficult to change them afterwards when the objects concerned are filled with data.
Bear in mind that you will be entering data on a long-term basis. Create your number range intervals accordingly.
1.4.2 Maintaining Number Range Intervals for Reference Numbers
Use
Reference number range has the following meanings:
This number identifies a number range to be used for the assignment of sequential numbers for WM reference numbers. Reference numbers are used to create or print a group of transfer orders at one time.
A sequential number generated by the system for the purpose of multiple processing of transfer requirements and delivery notes.
The reference number can also be used to print the resulting transfer orders at a later time.
Procedure
In this step, you define that, the Number range for Transfer order as 01 and Group number as 01, now you should tell the system how the number range would like for 01 as transfer order and 01 for the group number, for both number range, you may define you own number range, the following information just for reference:
Access the activity using one of the following navigation options:
IMG Menu IMG  Logistic Execution  Shipping  Picking  Lean WM Define control parameters and number ranges for the warehouse number  Maintain number range intervals for Reference Numbers( double click)
Transaction Code LN06
Check if the internal number range 01 (5000000000 - 5999999999) has been defined
Once you have defined your number ranges, it is extremely difficult to change them afterwards when the objects concerned are filled with data.
Bear in mind that you will be entering data on a long-term basis. Create your number range intervals accordingly.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula -
Hello friends,
I have client interview on this "WARE HOUSE MANAGEMENT AND LEAN WARE HOUSE MANAGEMENT" . So please help me out by sending good material. Really waiting for good support.
Thanks,
Rams.from here questions are also asked in the certification exams, so here's a point-wise rant:-
If you have a warehouse with random storage, you need to use the WM System with full functionality. Since a material can be stored in different storage bins or even several storage bins at the same time, precise inventory management at the level of the storage bin is required.
 Lean WM does not have inventory management at the level of the storage bin and is therefore more suitable for fixed bin warehouses. In a fixed bin storage area, the material is always in the same storage bin.
 To print the storage bin in the picking document, you must maintain the respective data in the material master in the view "Storage 1". Maintenance of further warehouse data and the Warehouse Management views is not required.
 Some of the WM functions not included in Lean WM are listed below:
 Storage sections
 Reserve storage bins
 Strategies for putaway and picking
 Replenishment
 Inventory at storage-bin level
This considerably reduces implementation effort.
 For Lean WM you need at least one warehouse number and at least one storage type from which picking takes place and one storage type in which goods are stored (for example, picking storage type as source storage type, shipping zone as destination storage type).
 In the picking storage area, you can have storage bins grouped together from the stock removal viewpoint (for example, to distribute the workload evenly). Picking areas can be defined for each warehouse number and storage type.
 In addition to the picking area, there are other organizational units in the warehouse. These are the staging areas and the doors. They are defined in the outbound delivery or determined by the system and they can also be printed out on the picking documents.
 You can activate Lean WM in Customizing at the warehouse number level.
 You assign a warehouse number to a combination of plant and storage type. In this way, the organizational units in the warehouse are linked up to MM Inventory Management. Also, through this assignment, a status for WM activities is assigned to the respective items in the outbound delivery. -
Hi,
Plz tell me uses about Ware House Management .1.Enables granular traceability and control
2. Ability to synchronize the system and material flow
3. Simple-to-complex placement and removal strategies
4. Assignment of inbound orders to outbound deliveries
5. Allocation of storage bins
6. Processing of all stock movements valid for WM like Receipts, issues, transfers
7. Utilizes stock placement and removal strategies e.g. Next empty bin, addition to stock, FIFO, LG/SM qtys.
8. Handle Special handling requirements (labeling, packaging)
9. Implementing with RFID one can achieve 99.99% stock accuracy
Hope this will help you
Enjoyyyyyy
Akshit -
Ware house management goods movement types
hi,
sap gurus,
what are all the goods movement types if ware house maangement and lean ware house management systems are implemented.
what is the t.code for viewing the stock at storage bin level.
my email id is [email protected]
regards,
balaji.t
09990019711.hello, friend.
you can display samples of movement types in WMS by going to IMG > Logistics Execution > Warehouse Management > Activities > Transfers > Define Movement Types.
for your second query, use LS24.
regards. -
How to configure returns process if ware house management is configured
hi,,
sap gurus,
how to configure returns process if ware house management
is configured.
bcz total ware house management is configured but
not with returns process
plz help me on this.
regards,
balajit
09990019711In Batch management config in Logistic general, Check for the movement type 101 & 321 whether batch creation has been activated to Manual, Automatic, or no creation. In your case it looks like for mvt 321 batch creation is set to manual & for 101 no creation.
if batch creation is set to manual, enter a manual batch no & proceed.
But to cross verify wheter 101 has generated batch or not please check the stocks in MMBE.
Hope this helps.
Regards
Mithun -
About ware house management/transpotation management
hello sap gurus,
i this is mohan in need of material/documents or details/suggetions about topics of ware house management&
transpotation management relavent to SD module. please forward ur views to d mail id [email protected]
with regards
mohanhello sap gurus,
i this is mohan in need of material/documents or details/suggetions about topics of ware house management&
transpotation management relavent to SD module. please forward ur views to d mail id [email protected].
with regards
mohan -
Img document of ware house management
hi can any one send me complete activity of img in ware house managed goods.example {from defining to assingning)
my email id is {[email protected]}
thanku
will be rewardedDear Saikiran,
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LEIDW/LEIDW.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LEIDW/LEIDW.pdf
Visit the following thread:
New to Materials Management / Warehouse Management?
http://www.erpgenie.com/sap/sapfunc/wm.htm
Regards,
Naveen. -
Ware House Management blue print
Hi Experts,
Please can you share Ware House Management blue print.
Thanks in advance,
ChandhuHi,
See the below link
http://www.sapfunctional.com/WM/Configuration/Index.htm
regards,
zafar -
Rwms.html error-----Retail ware house management
hi team,
i cinfigure rwms---retail ware house management succesfully.
but when i run url like http://servername:7777/rwms.html.
i getting error like exception: Operation time out error.
but default page of rwms working fine http://servername:7777/
pls do full ASAP,
Regards
Prabhat(Oracle retail Practice)i cinfigure rwms---retail ware house management succesfully.What is RWMS? Is it part of Oracle's E-Business Suite?
Cheers, APC
Blog : http://radiofreetooting.blogspot.com/ -
Hi friends,
I am interested to read the book on ware house management.can you please suggest a good author for wm.
Regards,
williamRead Documentation from below Links
http://www.erpgenie.com/sapfunc/wm.htm
http://www.sap.com/usa/solutions/business-suite/scm/pdf/BWP_WM_LES.pdf
http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/LEWM/MMWM.pdf -
Hi all,
Could any one give me a use ful link to understand the basic flow ware house management??I could not find a seperate forum for the same.
Thanks & Regards,
Karthikcheck: http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LEIDW/LEIDW.pdf
-
NOTES ON WARE HOUSE MANAGEMENT
Iam implemeting ware house management for RAW MATERIALS... if you have any notes on how to implement from start.. pls forward to my id ...
My client is in chemicals.....
[email protected]..
Garanteed reward...
KiranHello Kiran,
It will be typical implementation project so plan accordingly. you will have scoping, business blueprint, configuration, testing, integration testing, User acceptance testing, data conversion and final go-live with support on post golive system.
- Prepare the scoping list
- Discuss with business expert and document business processes
- Input your suggestion on SAP solution
- Analys fit-gap
- Propose final solution for gap
- Configure the system and develop objects for gap
- Carry out the testing, integration testing
- Conduct CRP and sign off the testing documents
- Plan data migration and prepare accordingly
- Carry out cutover activities and finally upload data
- Check the RF related setup and test the same.
- Finally go-live
- Check out the best practice for chemical industry
- Relevent configuration document, you can download from the first thread of this forum.
Hope this helps.
Regards
Arif Mansuri -
hello GURU's
i am going to implement Lean warehouse management , can any body explain me how good receiving process happens...and out bound process takes place in lean ware house...
thanks & regard
ashwani1)In lean WM ,you need to assign a warehouse to the plant and sloc combination.
spro->enterprise structure->asignment->logistic execution->assign warehouse to plant/sloc.
2)Create a storage type for fixed storage only and ofcourse all other interim storage type(911,902,916...)
3)No need to define storage sections.
4)No need to define strategies.
5)It works on fixed bin storage only.
Reward if helpful -
Kindly send materials regarding :- ware-house management
dear friends,
kindly send me the ware house module materials. i am very eager to learn ware-house module. kindly help me in this regard.
regards,\
g.v.shivakkumar
[email protected]Dear G.V. Shivakumar,
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LEIDW/LEIDW.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAOIW/CAOIW.pdf
New to Materials Management / Warehouse Management?
Regards,
Naveen.
Maybe you are looking for
-
Why MUST I download attachments on the iPhone ???
I love my iPhone 3GS/32 ... but one thing drives me CRAZY: The iPhone is the ONLY device on which you can´t disable the automatic download of attachments. I travel a lot ... and pay hundreds of Euros for "data-roaming". It´s a either-or-decision: Eit
-
EBS F5 263 - The difference is too large for clearing
Hi, When I am trying to upload the bank file from FF_5, i am getting the error as "(F5 263) The difference is too large for clearing". I have already gone through with posts related with the same error but didn't get the solution. I have checked OBA0
-
Can't I Use A Pci Soundcard ???
I have already pasted this message before but I did not got a final answer, so I will try again: Apache ASC-200 soundcard + NEO2-865LS motherboard I had the Apached soundcard acs-200 before the I had the MSI 865NEO2LS and there where no problems (I h
-
Help Me! My webpage rollover images goes away
Hi all. I'm realy stuck there with my rollover images. I got created my website using dreamweaver CS5 and when I opened it in firefox by myself all was ok, but when my friend opened page all rollover images jump to left side of webpage. So it mean th
-
TextInput control misbehaves when using the East-Asian fonts
I am a little curious about this issue and I would like to get some help from our community. The issue is about fonts when using East Asian languages.I have all East-Asian language installed on my computer (WIN SERV 2003)and I let my flex application