Where to find names for buttons and toolbars for use in userChrome.css?

I'm trying to change the layout of the new beta 8 browser, I would like to put the tab bar up into the title bar. The only problem with this is that the Home button and the New Tab button then stop working. I know that the Home button is called "home-button" but I don't know what the new tab button is called. I was merely wondering if there was a way of finding this out at all and if so how I would go about it.
Thanks.

Yes, you need to inspect a Chrome window.
The DOM Inspector (DOMi) has a menu item (Search > Select Element By Click) and a button to "Find a node to inspect by clicking on it" (left icon on the toolbar). 
You first need to open the browser window in the DOMi (File > Inspect Chrome Document) and choose the first from the list or choose the window that you want to inspect if you ave opened more. 
Click the Find button and use the keyboard (Alt Tab) or the Task bar to go back to the browser window (do not click in the browser window). 
Click that element with the mouse and keep the button pressed until you see a red border to indicate the the DOMi has located that element in the DOM tree.

Similar Messages

Where to find old backup files and how to use it to restore

Hi,
Need help. I did a OS update to iOS 6 today.
Before the update I did backup my phone on my PC.
But since that backup there was a new back up that created automatically when I connected my phone back to the PC. Now with some issues I want to rollback to previous backup. But this backup file is not visible in the restore from backup list. Is there anyway I can manually find this file and try to restore from it.
In the backup folder I can see a few files with previous backup time stamp but not sure how I can use these files and which file to use..
Pls help.. Thanks.

Open the Users folder on the internal drive, drag the migrated home folder to the desktop, and provide your administrator password.
(77054)

How to find function code for buttons on toolbar in oops alv

Hi experts,
I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALV

Hi Prakash,
-->First you have to set the pf status in your alv program by,
{FORM pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'FIRST'.
ENDFORM.                    "PF_STATUS}
-->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
      i_callback_pf_status_set          = 'PF_STATUS'}
*-->Then doble click on that pf status,
From the menu bar, select Extras->Adjust Template->List Viewer,
This will give you the existing statndard gui status of the program*
->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
      i_callback_user_command           = 'COMM'
And make a subroutine of the name 'COMM'i.e,
FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA: okcode TYPE sy-ucomm.
okcode = ucomm.
CASE okcode.
    WHEN 'REF'.
    CALL FUNCTION 'POPUP_TO_INFORM'
      EXPORTING
        titel         = 'MANSI'
        txt1          = 'CREATED BY'
        txt2          = SY-UNAME
      TXT3          = ' '
      TXT4          = ' '
endcase.
Hope it helps you
Regrds
Mansi

Where can we find the standard program for scripts and smartform for vl02

where can we find the standard program for scripts and smartform for vl02
regard,
anil

If it is a standard Script Output see that all config in NACE tcode was done correctly and in the Application document the output type was properly defined and attached to a medium, partner and all communication related things like printer name, when to print the output and number of messages etc are entered in the document
the go to the related application Tcode
(for sales order goto VA02 or VA03)
(delivery -VL02N or VL03N)
for Invoice VF02 or VF03
for PO -goto ME9F
enter doc number, Issue Output to -> screen/printer
then see the output
step 1 : copy the z layout into testing client thru SCC1.
step2 : go to se71 and check modified layout.
step3 : if it is under logistics.. go to TCODE "NACE".
u will see various applictions for each business process.
there u have configure ur related layout according to requirments,
for example u consider for Request fo Quatation..
there is APPLICATION called "EA"
click and enter into it. configure it with ur requirments, for help consult with ur functonal consaltant, and save it.
step 4 : goto tcode ME9A for requst for quatation(RFQ).
step 5 : enter test data avalable and check it with message display.
it is same for other applications like Contract agreament --> ME9k
invoice --> vl02n
and goes on..
Reward points for useful Answers

I bought CS5 Design Premium (Student and Teacher Edition) 3 years ago. Now I want to upgrade it but where can I find prices for Students and Teachers for upgrades?

I bought CS5 Design Premium (Student and Teacher Edition) 3 years ago. Now I want to upgrade it but where can I find prices for Students and Teachers for upgrades?

There are no upgrades for Student and Teacher Editions. You can continue to use the version you are using, or you can buy CS6 with no special upgrade price, or subscribe to Creative Cloud. However, I believe if you still qualify, you're offered a discount on Creative Cloud.
Adobe Creative Cloud for students and teachers | Adobe

Where i find trail version of j2ee engine for client machine.

Hi,
I am new bee in sap netweaver . Now i have ecc 5.0 at my office. I need to make WebDyn pro application at my client side. For testing purpose i need to create java environment for running my dynpro applications. So please can any one tell me where i find trail version of j2ee engine for client machine.
Please explain it and provide me paths where i download environment.
Regards,
Gurprit Bhatia

"(also, my profile says that I'm running OS X 10.4.6, but I'm not really sure, that's just what one of the disks has written on it that came with my used and very cheap machine "
Click on the blue Apple icon at the top left of your screen and choose About this Mac. That will tell you what your OS version is and what amount of RAM you have. The "More Info" button in the pop-up screen will give you the Apple System Profiler application and that will give you whole bunches of information on the drive space used etc.
David

Where to find old thread/post and closed the thread

where to find old thread/post and closed the thread
i try to search by email id, by userid but no results display at all only new post are shown

Hi,
where to find old thread/post and closed the thread
i try to search by email id, by userid but no results display at all only new post are shownMake sure that u have specified the Correct date range parameter as required.
Regards,
X A H E E R

Where are the 'Whats New' pdf's for Planning and Essbase for System 9.3

Anyone know where the find the 'Whats New' pdf's they used to have on Hyperion.com? I can't seem to find anything on Oracle cluster f*** website :) Also does anyone know if there is any information available on 9.5 release for June?
Thanks

Heres a good link for 9.3.1 documents:
http://download.oracle.com/docs/cd/E10530_01/doc/index.htm
Thanks for all the replies..

Hello!, my name is jan and i am using lightroom 2 for many years. I have an original set-up disk with a 24 digit serial number. I had never problems wih installation of lightroom. suddenly lightroom refuses to start when I try to from a picture i have tak

Hello!, my name is jan and i am using lightroom 2 for many years. I have an original set-up disk with a 24 digit serial number. I had never problems wih installation of lightroom. suddenly lightroom refuses to start when I try to from a picture i have taken with my nikon D500 and transferred to WINDOWS 8.1. i have tried to re-install lightroom : the procedure asks for the serieal number , but refuses to accept the number that always worked. PLEASE help!! jan

If you are certain you have the right serial number, there really isn't much we can help you with here. You might try downloading and installing the last version of Lightroom 2. It will be the trial version, but when the trial screen appears there is an option to indicate that you have a serial number. Incidentally, Lightroom serial numbers start with the first four digits being 1160.
Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 2.7 - English, French, German

Where can find Oracle error code and message?

Where can find Oracle error code and message?

http://otn.oracle.com/pls/db92/db92.to_toc?pathname=server.920%2Fa96525%2Ftoc.htm&remark=docindex
That would be the "Error Messages" manual.

How to find block free space and PCTUSED FOR THE TABLE

HI all,
Due to performance issues for my database , my management ask me to reset the PCTUSED and PCTFREE values , and my doubt is
1)How to find the current PCTUSED and PCTFREE values.
2)How to find block free space and PCTUSED FOR THE TABLE.
Please help me out regarding this.
Regards,
Vamsi.

1)version is 10.2.0.4
2)output of query
tablespace extent_management allocation_type segment_space_management
SYSTEM     LOCAL     SYSTEM     MANUAL
UNDOTBS1     LOCAL     SYSTEM     MANUAL
SYSAUX     LOCAL     SYSTEM     AUTO
TEMP     LOCAL     UNIFORM     MANUAL
USERS     LOCAL     SYSTEM     AUTO
UNDOTBS2     LOCAL     SYSTEM     MANUAL
INS     LOCAL     SYSTEM     AUTO
CONFTBS     LOCAL     SYSTEM     AUTO
REINS     LOCAL     SYSTEM     AUTO
ANALYST     LOCAL     SYSTEM     AUTO
BI     LOCAL     SYSTEM     AUTO
INTRFC     LOCAL     SYSTEM     AUTO
COGNOS     LOCAL     SYSTEM     AUTO
TS_INDX     LOCAL     SYSTEM     AUTO
TS_CHOLAWEB     LOCAL     SYSTEM     AUTO
TS_DASBOARD     LOCAL     SYSTEM     AUTO

How to find out relevant Infosources and Infocubes for Datasources (LO)

Hi Gems,
I am new to BW.
How to find out relevant Infosources and Infocubes for Datasources for LO Cockpit
any help site pls.
Thanks in advance

1. make sure that your datasources have activated (trans RSA5 in SAP Source System) from the SAP Source system (Ex: R/3 or SCM System)
2. after that you have to run trans RSA9 in SAP Source System to transfer new datasource in to BI System.
3. log-on into BI System, run trans RSA1, choose SourceSystem Tab in the left panel. Right click on to your SAP Source System then choose Replicate.
4. in the left panel choose BI Content tab, select infoObjects by infoArea.
5. then Click on Grouping, select in Dataflow Before and afterward. Click Collection Mode, select Collect Automatically.
6.in the middle panel, expand "Supply Chain Management" infoArea, select both Characteristics: Logistics General and Key Figures: Logistics General. Right click on it and select Insert Objects for Collections.
7. After the objects have been inserted into Collected Objects then choose install with option Install in Background.
8. Wait for the result.
Pls give point if you see its helpful.
Regards,
Chuong Hoang

HT204053 i use one apple id for icloud and one for itunes and now it wont let me since i reset my phone now i up graded to iphone 4s still the same problem

please help me fix this problem I have one id for icloud and one for itunes that i share with my husband

If the old ID is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iPhone when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Idoc for materials and service for same contract.

Dear All
I have an scope where i have to migrate the data for material and services for the same contract.Is there an Idoc which does it so or otherwise ?Earlier in scope materials contracts have been loaded with the help of idoc type :- PURCONTRACT_CREATE01 and that of Service Contract using Idoc type :- BLAORD03.No customization is however permitted .Tcode for the same is ME32K.
Regards
Somnath

Hi,
It is not clear to me if you are working with sapscript or smartforms.
You have only to find a variable which identifies the kind of invoice
I do not know that variable so i use an example variable
for sapscript:
/: IF &VBDKR-FKTYP& = '1'
/ INVOICE
/: ELSE
/ SERVICE ORDER
/: ENDIF.
In a smartform you can also do something like that.
but There you work with conditions (eq, BOOLEAN)
You have only to find the right variable
success,
Gr., Frank

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

Where to find names for buttons and toolbars for use in userChrome.css?

Similar Messages

Maybe you are looking for