Where to modify data transformation logic

By default, there is a logic that concat user's fullname from firstname and lastname. I would like to ask where does this rule configure? I would like to modify this logic and add another logic for other attribute. Where should I configure?
Thanks.

I would like to do the same a Gerald. Has anyone created a custom tag that returns custom date format from BC4J. I actually am only viewing the date not actually inserting it back to the DB.
I know that this will be available in the next release but that is still a while away.
The code I am using is as follows:
<jbo:ShowValue datasource="TableName" dataitem="LastUpdTs" ></jbo:ShowValue>
null

Similar Messages

Receiver based date transformation

Hi,
We have a scenario where we need to map the date to the receiving databases. We have the same map going to oracle receiver and a mySQL receiver. The date formats of both the databases are different. How can this be handled within the same map ( like receiver based date transformation) or does it need to go throught the traditional route of different maps for different JDBC receivers? Any help is appreciated..
Teresa

Teresa,
Yes, I have the same payload going across to both DB at the same time. THe payload to mySQL is failing because the date format is in oracle transformation. I was wondering whether this could be done without doing 2 different maps.
Yes, you can do it in the same mapping.
For two different receivers, you must be having two different Business Services? If yes, then get the values of receiver BS in your mapping and do a simple condition test. Apply the date transformation logic accordingly.
For getting the Receiver Service name, you can either use the "Receiver" under "Constant" standard function or use the following UDF -
String RcvService;
java.util.Map map;
map = container.getTransformationParameters();
RcvService = (String) map.get(StreamTransformationConstants.RECEIVER_SERVICE);
return RcvService;
You can change the above code as per your requirement.
Hope this helps.
Regards,
Neetesh

Smbfs file modified date not updating

When I save a file from Photoshop CS3 to an SMB share (where I have terabytes of images) it appears the Modified Date does not change after I edit. This makes it impossible to work my downstream processes which rely on looking for modified image since a certain date.
I checked against TextEdit (seems to rewrite the file which gets a new create and modified date) and TextMate where the modified date is correctly set. Also the unix touch command works fine.
Any ideas how to ensure that a file saved from Photoshop CS3 will correctly set the Modified Date on an SMB share?

Usually the changes are made to the contents of the domain.sites2 folder and not the actual folder itself. As long as you edit, save and publish, the next time you open iWeb you'll see the latest version. However, be sure to backup the Domain.sites2 package frequently.
OT

Script Logic VS Data Transformation File

Hi all,
   I'm new to SAP BPC. I have knowledge of SAP BW.
   I can see conversion file, which we are referring in data transformation file. which we can use for mapping and conversion of external data into internal data.
How data transformation file different form script logic? Are we going to refer script logis in Data transformation file for each required dimension?
Can any of you give me clarity on how to place script logic and data transformation file in BPC data management flow.
I will really applicate all your help!!!
Thanks
Ben.

Nilanjan,
   I have a another quick question...
suppose my bpc application has 5 dimensions. Out of the 5 dimensions, 4 dimensions data i'm getting directly from SAP BW. assume 1 dim, i need to extract by doing look up at different table which also reside in BW.
   how to populate data for DIM 5.
   I got your point that data transformation file purely for field mapping. suppose DIM5 if i want to populate from script logic, wht do i need map in Transformation file. I hope you got my point.
   My question if how to populate a DIM in BPC using lookup approach.
Thanks,
Ben.

Where does Stylus save its data for Logic

I just got Stylus and am using Logic 8. I am wondering where Stylus saves its data that Logic accesses. I have searched my whole G5 and can't seem to find it anywhere.

Do a spotlight search for the "SAGE" folder - the RMX library, expansion packs and user saved multi's are all in there.

Where is the "Last Modified Date"?

I'm in Report Builder trying to create an Incident report that includes the "Last Modified Date" value. However, I can't seem to find it in any of the views using the Report Builder wizard.
Can someone point me to the right source for that value?
Thanks,
Chuck
Chuck Roy, Pennsylvania Turnpike Commission

Chris,
For reports, I would want to use the same data that SCSM uses in Views and Templates. When creating a View for Incidents you can select based on the Last Modified Date. When you create an email Template for Incidents, you can select the Last
Modified date to be inserted into the template.
In order for our report to display the exact same Incidents as a View that selects based on Last Modified Date, the report needs to use the Microsoft definition of Last Modified Date.
Generally, I agree with your definition. However, an easier definition may be that Last Modified Date equals the most recent History log date on the History tab.
Either way, as I mentioned above, it needs to be the same as is used in Views and Templates, recognizing that there are timing differences between the data base and data warehouse.
Chuck
Chuck Roy, Pennsylvania Turnpike Commission

How and where does Delivery Date get calculated in ME51N

Hi,
Can anyone please let me know the point where the delivery date is calculated in ME51N ?
i enter the Material and Plant and press enter and Delivery Date ( = Current Date ) gets populated automatically. I need to find out where it happens.
Because there is a requirement that the Delivery Date should be equal to the Current Date + some Lead Time, instead of the current Date. So, I need to find a BADI or exit.
For the transaction ME51N, there is only one Customer Exit - MEREQ001. And if I put a break-point at the compnents of this exit, the control doesnt go to these exits when I press Enter.
And there is a BADI 'ME_REQ_POSTED', which gets triggered when we save ME51N, but it should be triggered even when we press enter.
Please help me with all the above details.

Hi Dagny,
This is related to PO stuff. Probably the logic may be useful for you.
You can try out enhancements:
LMEKO001
LMEKO002
And you try out below code.
FIELD-SYMBOLS: <beket> TYPE ANY TABLE.
DATA: l_date        TYPE d
     l_ebelp       TYPE ebelp,
     w_beket       TYPE beket,
     t_beket       TYPE STANDARD TABLE OF beket,
     w_data        TYPE ty_data.
* Get the item number in the correct format.
l_ebelp = komp-kposn+1(5).
* Get the tabe with Delivery Schedule data.
ASSIGN ('(SAPLMEPO)ETT[]') TO <beket>.
t_beket[] = <beket>[].
READ TABLE t_beket INTO w_beket WITH KEY ebelp = l_ebelp.
*l_data = w_beket-eindt.*
Here l_data has the delivey date field you can even modify this data and update what ever u want.
Thanks,
Raj
Edited by: Raja gurrala on Jul 23, 2009 3:24 PM

Excel sheet has modified data cells error - do you want to submit

Using smartview in office 2007 I often get trapped in a loop where each time I modify any data on the excel sheet I get the error "Excel sheet has modified data cells. Do you want to submit the modified data cells before proceeding?". Regardless if I choose yes or no I basically have to start a new instance of excel to clear the error.
For the most part I never use member select rather just type the members I want freehand in the excel workbook. Seems like the error arises after I insert or delete a row or column and then try to update the page.
If I "reset" the connection it seems to help but not all the time.

This may be the same issue as you are experiencing "When Trying to Copy Cells Between Excel Tabs Get Message "Excel Sheet has modified data cells do you want to submit the modified data?" [ID 1301092.1]"
The document is on "My Oracle Support"
Cheers
John
http://john-goodwin.blogspot.com/

Discoverer reports shows 'NULL' in columns where is no data

Hi All,
Discoverer report is showing NULL in columns where is no data.
please advise ASAP.
E-biz: 12.0.6
Database: 11.2.0.2
Discoverer: 10.1.2.55.26
Thanks in advance.
Regards
Kumar

In Discoverer BI DEsktop By default, it uses “NULL” text, but we can show Zero or blank then that report is executed as text report.
how can we set it as for all reports as default blank or zero.Have you reviewed the docs referenced above?
Please see these docs.
Discoverer 10.1.2/11g Worksheets Do Not Display Expected Null Format Setting After Modifying Tools Options [ID 311841.1]
Workbooks Show Wrong Null Format in Viewer/Plus After New Install or Upgrade from 4i to 10.1.2 [ID 352194.1]
Thanks,
Hussein

How can I preserve the modify date of the files I transfer from my local computer to the remote webserver?

How can I make sure the the modify date of files are not updated to the date the file was uploaded or downloaded.
There are multiple people working on my sites and I am the only one that uses Dreamweaver. The problem this presents is when one of my colleagues works on an image and I want to update my local computer it changes the date of the image to the date that I downloaded it and now when I compare what I have on my local computer to what is on the server they are different modify dates.

Dont think you can find out the date of purchase!
Where should know this without a payment bills or sales checks.
What you can do is to find out when the notebook was registered on the Toshiba page.
[Toshiba Warranty Lookup |http://computers2.toshiba.co.uk/toshiba/formsv3.nsf/WarrantyEntitlementLookup?OpenForm]

ABAP Function Module where-used in BI-Transformations

Hi,
we have developed some ABAP-Z-Function-Modules. These are used in several BI-Data-Transformations and work fine and performant.
The problem we have now is to find out in which transformation a Function-Module is used.
The where-used-list in SE37 doesn't report any BI-Transformations althought I check all categories.
Got anyone a solution for our problem?
Christian

Hi,
see this code for function module where used list only for transformation . i used the same code as bhaskar specified..but little modification..here u used "date_get_week" function module..
TYPE-POOLS slis.
DATA fcat1 TYPE slis_t_fieldcat_alv.
DATA: BEGIN OF t_display OCCURS 0,
         targetname LIKE rstran-targetname,
         sourcename LIKE rstran-sourcename,
         tranid LIKE rstran-tranid,
         routine LIKE rstran-startroutine,
         line_no LIKE rsaabap-line_no,
         line LIKE rsaabap-line,
END OF t_display.
data : input(75) type c.
DATA : input_pattern1(75) TYPE c.
DATA : input_pattern2(75) TYPE c.
DATA : same_source(30) TYPE c.
**Internal table declerations**************************************
TYPES: BEGIN OF t_trans_lookup_finder,
         targetname TYPE rstran-targetname,
         sourcename TYPE rstran-sourcename,
         tranid TYPE rstran-tranid,
         routine TYPE rstran-startroutine,
         line_no TYPE rsaabap-line_no,
         line TYPE rsaabap-line,
END OF t_trans_lookup_finder.
DATA: i_lookup_finder TYPE STANDARD TABLE OF t_trans_lookup_finder,
wa_lookup_finder TYPE t_trans_lookup_finder,
i_trans_lookup_finder TYPE STANDARD TABLE OF t_trans_lookup_finder,
wa_trans_lookup_finder TYPE t_trans_lookup_finder,
i_trans_final TYPE STANDARD TABLE OF t_trans_lookup_finder,
wa_trans_final TYPE t_trans_lookup_finder.
DATA : i(7) TYPE n.
DATA old_cube(20) TYPE c VALUE ' '.
DATA old_source(20) TYPE c VALUE ' '.
**Selections for update rules**************************************
SELECT DISTINCT targetname    sourcename tranid        endroutine       line_no       line
       INTO TABLE i_trans_lookup_finder FROM
       rstran AS a INNER JOIN rsaabap AS b ON aendroutine = bcodeid
                       WHERE
                       aobjvers = 'A' AND bobjvers = 'A'.
APPEND LINES OF i_trans_lookup_finder TO i_lookup_finder.
**Selections for Transformations(Expert routine)*******************
SELECT DISTINCT        targetname       sourcename       tranid       expert       line_no       line
       INTO TABLE i_trans_lookup_finder FROM
       rstran AS a INNER JOIN rsaabap AS b ON aexpert = bcodeid
                       WHERE
                       aobjvers = 'A' AND bobjvers = 'A'.
APPEND LINES OF i_trans_lookup_finder TO i_lookup_finder.
Edited by: Sakthi Jaganathan on May 20, 2009 6:25 PM

This database was connected to a Microsoft Access Services site that is not compatible with this version of Microsof Access. You cannot make design changes or modify data in database.

Hello All,
I am getting this error while I am connecting my access database website for the change
"This database was connected to a Microsoft Access Services site that is not compatible with this version of Microsof Access. You cannot make design changes or modify data in database."
I am using SharePoint 2010 and Microsoft Office 2010.
I have created one Contact Database Site and now I am trying to modify the layout of the form in Access. and I am getting the error that I have mentioned.
Please provide help on it.
Thanks in Advance....

Hello All,
I got the answer, we have to enable the port 80 or where the access service is deployed and we have to change Trust setting and also, enable the macro from Access.
Hope this will help to other....

ABAP OO data fetch logic

Hi Experts,
                 I have normal report with dat fetch logic. I need to convert my normal code logic to OO abap logic using classes & methods..
Exp:
      select knumh kotabnr vakey datab datbi knuma_bo
             from konh
             into corresponding fields of table i_konh
             for all entries in i_kona
             where knuma_bo eq i_kona-knuma.
Is there any easy way to write the code in OO using classes & methods.
Thanks.

Hi Khan,
Here is the code for your query with OO abap logic i.e. Class and methods.
Code.
TABLES: konh.
data: i_konh TYPE TABLE OF konh,
      i_kona Type TABLE OF kona.
CLASS class_name DEFINITION.
PUBLIC SECTION.
CLASS-METHODS get_details.
ENDCLASS.
CLASS class_name IMPLEMENTATION.
METHOD get_details.
DATA: knumh   TYPE REF TO konh-knumh,
           kotabnr TYPE REF TO konh-kotabnr,
           vakey    TYPE REF TO konh-vakey,
           datab     TYPE REF TO konh-datab,
           datbi       TYPE REF TO konh-datbi,
          knumabo TYPE REF TO konh-knuma_bo.
select knumh kotabnr vakey datab datbi knuma_bo
             from konh
             into corresponding fields of table i_konh
             for all entries in i_kona
             where knuma_bo eq i_kona-knuma.
ENDMETHOD.
   ENDCLASS.
*Global data.
data: obj TYPE REF TO class_name.
*Event block.
START-OF-SELECTION.
CREATE OBJECT: obj.
CALL METHOD obj->get_details.
Regards,
Soundarya.
Edited by: K.Soundarya Singh on Mar 24, 2010 8:42 AM
Edited by: K.Soundarya Singh on Mar 24, 2010 8:43 AM

*.eml Time Stamp - Select File in Windows Explorer Changes the Modified Date

The Windows Live Mail *.eml files time stamp is getting changed to the current date when the file is selected in the Windows Explorer! I save backup copies of important E-mails to folders on the Hard Drive and then synchronize them with the same folders on other LAN Hard Drives for backup archives. When these E-mail files are selected or opened from the Windows Explorer in the Windows 7 OPS the Modified Date Time Stamp is changed to the current date automatically! This action creates a real problem when doing later synchronizations of all of the folders! The date will not be the original date of the E-mail and the original file will be over copied with the file with the newest date stamp. I stopped Indexing on the *.eml files and that stopped the time stamp change when overcopy synchronization, but if the file is selected during a viewing in Windows Explorer then the Time Stamp is updated to the current date again! A solution to this problem would be greatly appreciated if anybody knows of one. Thanks - - - Shorto

The Date and Timestamp changing issue in Windows 7 has a two part fix!
1. Disable the Indexing of the *.eml file type in the Indexing Options located by Clicking on "Control Panel" - "Indexing Options" - Advanced Button - File Types Tab - scroll down to the .eml file type and uncheck the Box then click OK to finish, so
that the Email type of files won't be Indexed.
2. Delete the Registry Entry listed below, be sure to Export and Save the original Key so it could be Restored if something goes wrong! \HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\PropertySystem\PropertyHandlers
and Delete the .eml entry
That should fix the problem with the changing Date/Timestamp of Email Files. For more information read CarlS's WindowsSeven Fourm thread where I also have more input:
http://www.sevenforums.com/browsers-mail/35334-eml-files-timestamps-updated-constantly.html
This should give you a better understanding on the problem and the Fix. - - - Shorto

Get File by modified date and extension then copy to location

Hello,
Ill give a brief description of what I am trying to accomplish. We have a bunch of files that are sitting on a deduplication box (Exagrid), we want to try and copy certain files off of this dedup box, however, if we copy EVERYTHING this will fill up our
entire NAS Device. So, instead, I need to build a script that finds files by a modified date and extension type, then copy those to a specified folder.
Here is the code:
$logfile = "C:\CopyResults.log"
function LogWrite{
Param([string]$logstring)
Add-Content $logfile -Value $logstring
$date = get-date
$DateToCompare = (Get-Date).AddDays(-2)
$Files = Get-ChildItem -Recurse | Where-Object {$_.LastWriteTime -gt $DateToCompare} | Where-Object {$_.Extension -eq ".xlsx"}
foreach($File in $Files){
Write-Host "$File was copied to C:\test"
Copy-Item $File C:\test
logWrite "$File was copied to c:\test --- $date"
The file extension is of course just a test, as well as the destination of where these files are to be copied to. Ultimately I would like to build in the functionality that will check the date and delete the files after a certain amount of time has passed and
then copy new files. For now, though, I would be satisfied with just some insight on my own idea and know where I am going wrong or how to clean this up a little better. The overall issue I having is when I run this portion of the script I get this: Copy-Item
: Cannot find path 'C:\Users\<username>\<filename>.xlsx' because it does not exist.
At line:13 char:5
+ Copy-Item $File C:\test
+ ~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (C:\Users\<usern...al filename>.xlsx:String) [Copy-Item], ItemNotFoundException
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.CopyItemCommand

I solved the issue. Here is the full script:
net use \\netpath\filename /user:<Username> <Password>
$logfile = "C:\CopyResults.log"
function LogWrite{
Param([string]$logstring)
Add-Content $logfile -Value $logstring
$date = get-date
$DateToCompare = (Get-Date).AddDays(-1)
$VBMs = Get-ChildItem \\netpath\filename -Recurse | Where-Object {$_.LastWriteTime -gt $DateToCompare} | Where-Object {$_.Extension -eq ".vbm"}
$VBKs = Get-ChildItem \\netpath\filename -Recurse | Where-Object {$_.LastWriteTime -gt $DateToCompare} | Where-Object {$_.Extension -eq ".vbk"}
$VIBs = Get-ChildItem \\netpath\filename -Recurse | Where-Object {$_.LastWriteTime -gt $DateToCompare} | Where-Object {$_.Extension -eq ".vib"}
foreach($VBM in $VBMs){
Write-Host "$VBM was copied to C:\test"
Copy-Item $VBM.FullName \\netpath\filename
logWrite "$VBM was copied to c:\test --- $date"
foreach($VBK in $VBKs){
Write-Host "$VBK was copied to C:\test"
Copy-Item $VBK.FullName \\netpath\filename
logWrite "$VBK was copied to c:\test --- $date"
foreach($VIB in $VIBs){
Write-Host "$VIB was copied to C:\test"
Copy-Item $VIB.FullName \\netpath\filename
logWrite "$VIB was copied to c:\test --- $date"
"In this case you are handing a System.IO.FileSystemInfo.FileInfo object to the Copy-Item cmdlet. I think the cmdlet is probably defaulting to using the .Name property and that is not enough information for the copy to work. When you explicitly give the
.FullName property to the cmdlet, it now has the information that it needs."
I found this on Stack Overflow buried in the forums and it resolved all my issues. I have tried using that tool and it works very well, however, Powershell is what I am using for everything and I would like to keep it that way.
Thank you all for your time and help.

Where to modify data transformation logic

Similar Messages

Maybe you are looking for