Where to put XSDs in the local Web(HTTP)Server so that they are visible ?

Currently I am statically import XSD Schema files from my hard disc into projects.
However I would prefer to put these XSD files onto the local Web(HTTP)server so that I can refer to them
dynamically with a http://... address.
How (where/which directory) do I have to put the XSD schema files on the local Oracle WebServer so that I can refer to them as http://127.0.0.1/... resp. http://localhost/....
Peter

I have placed my xsd file hierarchy under $ORACLE_HOME/bpel/system/xmllib, and address them with something like http://HOST:PORT/orabpel/xmllib/XYZ.xsd, as you suggest. This works fine if the schemas are in the xmllib directory itself. However, if I put the schemas in a subdirectory, the server does not produce the schema, just a blank page.
How can you make schemas in the xmllib subdirectories visible using a URL as above?

Similar Messages

When clicking "open in new tab" a link that is on the bookmarks toolbar, but hidden (meaning that they are visible when clicking on arrows on right side) nothing happens. Actually all right click features do not work on those "hidden" bookmarks.

I have lots of bookmarks on the bookmarks toolbar, so they some are hidden on the right side, you have to click on those arrows in order to reveal those, and that's were I found out that right clicking on any of those bookmarks does not have any effect.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

HT5312 I did all the steps, but my problem is that they are asking me some questions that I did not select when I created my Apple ID, so I clicked where it said reset security questions info... and then when I went to my email, they didn't sended me anyt

I did all the steps, but my problem is that they are asking me some questions that I did not selected when I created my Apple ID, so I clicked where it said reset security quiestion info...... And then when I went and cheked my email, they did not send anything to me!
This problem started 1 month ago!
Ivana1728

The email response is automated, and almost certainly is detected as "junk" or "spam". So, try again and check your spam folders for their reply.

When copying songs to my itunes some of the songs don't show up in the library. I can see that they are being downloaded/copied to my itunes, but I cannot locate them in my library.

When copying songs to my itunes some of the songs don't show up in the library. I can see that they are being downloaded/copied to my itunes, but I cannot locate them in my library?

Do you have a Recently Added playlist? Can you see them there?

How do i make the back and forward buttons function? they are visible but not functional.

I have firefox 8.0.1 and my back and forward button are not working. They are visible but not functioning. I have tried starting in safemode and without any add-ons and the back and forward buttons are still not functioning. What do I need to do to make the buttons functional?

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

TS1559 I have two problems but since they both started at the same time I'm guessing that they are related. My WiFi on/off button is greyed out AND my iCloud Drive (under "Settings") has been "Upgrading" with that spinning download symbol for 2 wks now! N

I cant be positive but I think this started when my iPhone did an automatic software update. I couldn't get any WiFi connection because when I go to turn it back on the iPhone wont let me and Greys out my WiFi on/off button.
But also I think something happened to my iCloud connect as well because next to my iCloud Drive under "Settings" it has that spinning symbol that usually denotes waiting for something to finish downloading. But this time it never stopped! Its been spinning saying "iCloud is Upgrading" for 2 weeks now! I have tried the on/off iPhone restart or reset, and I've even put my iPhone into "Recovery Mode" as a last resort. but when iTunes was finished "Restoring" it, nothing had changed; Still Greyed out WiFi button and iCloud is still "Upgrading"! Help please!

Hi Ichin,
I am a bit confused with your statement -
if ((p_select_list is not null) and (p_text_field is not null)) then
return true;
elsif ((p_select_list is null) and (p_text_field is null)) then
return true;
else
return false;
end if;Here this statement -
if ((p_select_list is not null) and (p_text_field is not null)) then
return true;returning the result TRUE when both fields are not null
And this statement -
elsif ((p_select_list is null) and (p_text_field is null)) then
return true;returning the result TRUE again when both fields are null. If you see closely basically is not validating becoz it returning true whatever the input is.
I do not know what you want to use the second statement when you have else statement at the end. It will return false if one or both fields are null unless you want to validate either text field.
Hope this make sense.
Regards,
M Tajuddin
web: http://tajuddin.whitpeagesbd.com

We have two iPod touch 2nd generations, one had to be restored a few days ago and is now not able to have some of the apps back on it saying that they are incompatible with the iPod. Is there any way to "copy" the apps from 1 to the other??

Is there any way to get an older version of the app that can be compatible or to "copy" the app from one iPod to the other?
Or maybe to update the opperating system??

you can by downloading iTunes to your computer/laptop but before plugging it in to the computer make sure all of your apps are on it then just sync the restored iPod to your computer and all of the apps on the computer will go to your iPod.. Good Luck

How do I change the URL to the Remote Web Access server in Windows Server 2012?

Hallo!
I have set up a Remote Dexktop Service using the "Quick" deployment method in Server Manager and everything is working greate internally, but I cannot start an app published in Remote Web Access from outside our network.
The problem is that it wants to start the using the internal URL, for example, server.domain.local, instead of the external one, for example remote.server.com.
I therefore want to know how I can change the default URL for the Remote Web Access server and all the Remote Web Apps in Windows Server 2012?
I have allready looked in Server Manager and I can change some of the deployment settings in server manager, but there is no way to alter the URL of the Remote Web Access server. See below images:
Pressing the internal URL only results in opening the internal URL.
This was very simple to do in Windows Server 2008 R2 using the tsconfig tool, but it does not seam to be any way of solving this in server manager.
A possible sollution would be to alter the registry someware in HKLM->Software->Microsoft->Windows NT->Terminal Services. But this can easaly lead to problems due to wrong format, etc. and is probably not supported.
Is there a simpler and supported way?

That option can be used to connect to any machine that you want. The error message indicates that the client machine cannot resolve the name "server.domain.local" to an IP address that it can connect to.
You have several options for configuring that tab on the RDweb site. You can even remove it entirely.
Customization of RD Web Site
RD Web provides a number of customization options for the RD Web interface, including the ability to control default Gateway server settings and redirection settings. These settings
are controlled by editing the web.config file located in %SYSTEMROOT%\Web\RDWeb\Pages.
Displaying Local Help
To display local help for users instead of the web-based help, edit the LocalHelp value and change the value from false to true.

<add key="LocalHelp" value="false" />
When this value is changed, a user that clicks on Help in the upper right corner of the RD Web login page will open the local help file instead of web-based help.
Hiding the Connect to a Remote PC Tab
The RDWeb page
Connect to a Remote PC tab can be hidden from users to prevent connections to any servers through RD Web other than the servers configured in a collection. By default, this setting is set to true and the
Remote Desktops tab is displayed. To hide the tab, set the value to false.

<add key="ShowDesktops" value="true" />
When the value is set to false, a user will not see the Connect to a Remote PC tab when logged on to the RD Web page
RD Gateway Settings
If the Connect to a Remote PC tab is enabled, an administrator can configure RD Web to use a Gateway server when connecting to remote computers. To specify a gateway, edit the below
value with the name of the RD Gateway server:

<add key="DefaultTSGateway" value="" />
The default authentication method for the RD Gateway server can also be configured by editing the following section of the web.config:

<add key="GatewayCredentialsSource" value="0" />
Devices and Resources
By default, only Printers and Clipboard are redirected on connections made using the Connect to a Remote PC tab. If the user clicks the
Options << button, the redirection settings for a specific connection can be modified
To configure each specified redirection option to be enabled or disabled by default, edit the following section in the web.config file:

<add key="xPrinterRedirection" value="true" />
<add key="xClipboard" value="true" />
<add key="xDriveRedirection" value="false" />
<add key="xPnPRedirection" value="false" />
<add key="xPortRedirection" value="false" />
LAN Experience Defaults
Windows Server 2012 RD Web Access can display a new user selectable option for optimizing the connection for a LAN experience. This option is displayed at the bottom of the RD Web
page and can be controlled by the administrator using the following section of the web.config file:

<add key="ShowOptimizeExperience" value="false" />
<add key="OptimizeExperienceState" value="false" />
This value is set to false by default, but when changed to true, the following checkbox will display at the bottom of the webpage. The LAN experience
checkbox can also be set as enabled by default.
Each setting can also be modified using the IIS Manager user interface:
Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

HHow do I Track my images Trace who has stolen my Images and puts them on there web site and claims that they have done

How do I Track my images Trace who has stolen my Images and
puts them on there web site and claims that they have done that
work
I know how to watermark my images,

adobe_help_me posted in macromedia.dreamweaver:
> How do I Track my images when someone else puts them on
there web
> site and claims that they have done that work I know how
to
> watermark my images,
The only way I know is to use digital wartermarking and
tracking
services like DigiMarc as suggested by Bregent in your
previous thread.
It's kind of neat in that it places digital information in
the images
as noise. In most cases it's quite unobtrusive, but only you
can be the
judge of that.
The information even survives through some minor editing of
the files.
So if somebody crops your visible watermark or does some
other minor
editing, the information is still in the file.
I'm only an amateur photographer and my free trial ran out
years ago. I
did not get to see the tracking system in action with the
trial
version.
Mark A. Boyd
Keep-On-Learnin' :)

Where are my photos on the PC after sync with an iphone? I know nobody out there is stupid enough to suggest to me that they are encrypted and inaccessible, right? Seriously? How stupid would Apple corporation have to be to do something like this?

Where are my photos on the PC after synching with an iphone? I know nobody out there is stupid enough to suggest to me that they are encrypted and inaccessible, right? Seriously? How stupid would Apple corporation have to be to do something like this? That would be just as foolish as making my music unusable on the PC...
Okay, Let's assume that Apple is indeed THAT foolish.......How does one get the photos from the phone to the PC and still use them?

The photos are still on your phone, and if enabled in your Photo Stream. They are not automatically transferred to your computer when syncing.
See iOS: Import personal photos and videos from iOS devices to your computer and iCloud: My Photo Stream FAQ
tt2

Please I'd be happy if we can claim where we are misleaded when buying the product : The retailer or seller should know what they are selling ... For example I asked earphone for my shuffle ipod 3rd generation showing it

Follow-up: 203908177
Dear sir/madam
Please I'd be happy if we can claim where we are misleaded when buying the product : The retailer or seller should know what they are selling ... For example I asked earphone for my shuffle ipod 3rd generation showing it but the they gave me an ear phone which just was like an ordinary earphone where I can't low and high the volume nor I can select the playlist ... Please read below
that I wrote to you in the email I've sent to you on last April as followed :-
Dear madam/sir,
It's me Santosh Lamichhane who just arrived to my place in Kathmandu, Nepal after a month visit in Bolivia and Argentina ...
Dear madam/sir, I like to inform you that while my visit in Santa Cruz de La sierra in Bolivia I bought a new earphone for my ipod shuffle 3G due to the problem in my old earphone on the date as followed in the bill of as shown
ALTEK
PN 26986 VN 24186
Vendedor:
Federico
Date 02/04/2012 time: 03:34:22 PM
I did checked the earphone there same time and found that I can't lower or high the volume from that new purchased earphone and even asked why and one of your senior staff said it might be the problem of my ipod shuffle's setting, Since the beginning of the time of purchase till I came to Nepal 4 days ago I didn't use the ipod because I'm not able to increase the volume and I didn't took my laptop with me while my visit there ...
But when I try to restore my shuffle here ; even that doesn't works ... Today and yesterday when I checked my friend's earphone of ipod - it was working on my shuffle and my earphone also working in his classic ...
I want to kindly request you since I showed my shuffle at the time of buying earphone there in Altek, San Martin AV in SAnta Cruz de la Sierra in Bolivia and asked I need the earphone for my ipod shuffle 3G It's not my fault ... Could you please ask the agents of apple here in Kathmandu to replace it with the working the right compatible earphone for me ...
Hope to hear from you very soon ...
Thanking you
From Santosh Lamichhane,
Cell +977 9802033662, 9813716393,
+977 (1) 5002018 Res ...
1210 Tikhedewal 28, Lalitpur SMPC 14, Kathmandu, Nepal

You will not get a reply from Apple in these forums. As stated in the information to which we all agreed when we signed up here, these forums are for user-to-user assistance, not for getting technical assistance from Apple. All you will get here is suggestions and commiseration from we your fellow users. If you want to express your displeasure directly to Apple, call the tech support line and ask to speak with Customer Relations and see if there's anything they can do for you. Please keep in mind that the CR rep will not have caused your problems, so keep your calm and be polite; they're just working stiffs too.
Message was edited by: Dave Sawyer

Requirement is to run CMD.EXE under the Local System Account. So that we can map a network drive to be used by a windows service, which will be created by command: - net use z: \\servername\sharedfolder /persistent:yes

Environment:
OS: Windows 7 32/64 bit, Windows 2008 Server 64
bit/ Windows 2012 Server 64 bit
Priority:
- Critical
Requirement: - Since
the Windows Service is running under the Local System Account, we would like to emulate this same behaviour.
Basically, we would like to run CMD.EXE under the Local System Account. So that we can map a network drive to be used by a service using following
command
net use z: \\servername\sharedfolder /persistent:yes.
Already Attempt:
We tried to launch the CMD.exe using the DOS Task Scheduler AT command. Here’s a sample command:
AT 10:36 /interactive cmd.exe
But I received a warning that “due
to security enhancements, this task will run at the time excepted but not interactively.”
It turns out that this approach will work for XP, 2000 and Server 2003 but due to session isolation
Interactive services no longer work on Windows 7, Windows Server 2008 and above.
2. We
tried to create a secondary Windows Service via the Service Control (sc.exe) which merely launches CMD.exe.
<Drive>:\sc create RunCMDAsLSA binpath= "cmd" type=own type=interact <Drive>:\sc
start RunCMDAsLSA
In this case the service fails to start and results it the following error message:
FAILED 1053: The service did not respond to the start or control request in a timely fashion.
3. One
suggestion, we found to launch CMD.exe via a Scheduled Task, but
it is not giving any option to launch CMD.exe in interactive mode; so that I can map network drive using net command.
4. I read an article, which
demonstrates the use of PSTools from SysInternals. I launched the command line and executed following command
psexec -i -s cmd.exe
PSTools worked fine, but It seems that in scope of Sysinternals Software License
Terms. You may not "use the software for commercial software hosting services."
Application will deploy on client, which will be like commercial,
so we are not able to use PSTools.
Kindly assist us for achieving the requirement. We have tried all the ways, but nothing is working for us. Kindly suggest.
I will be really thankful.

Hi Sir,
Nothing worked from above for us. You can see our remarks on posted query.
That’s why, we posted on forum.
And there will not be any vulnerability, because, if we will use "net
use ..."
in network domain; definitely,
we will provide username and password of mapped drive system.
And, that system, itself is given by client; so that, there must not be any vulnerability; they are ready to provide user name and password.
We need a way; by which we can complete the requirement. Kindly assist.
Regards,
S. P. Singh

How can i check the office web app server(wac client) is calling custom WOPI host?

I am getting an error when I testing my wopi host(which is the same as
example) with Office Web app server "Sorry, there was a problem and we can't open this document. If this happens again, try opening the document in Microsoft Word."
1-how can find the log files of this error?
2-how can i check the office web app server(wac client) is calling my WOPI host?
I am not sure about cumunication between owa to wopi host. I actually dont know how to implement checkfile and getfile functions to wopi host for waiting for call back from owa client.
Note:I am sure that office web app server is configured true. Because i test it with sharepoint 2013 and editing and viewing is working well.

Hi,
According to your post, my understanding is that
CheckFileInfo is how the WOPI application gets information about the file and the permissions a user has on the file. It should have a URL that looks like this:
HTTP://server/<...>/wopi*/files/<id>?access_token=<token>
While CheckFileInfo provides information about a file, GetFile returns the file itself. It should have a URL that looks like this:
HTTP://server/<...>/wopi*/files/<id>/contents?access_token=<token>
There is a great article for your reference.
http://blogs.msdn.com/b/officedevdocs/archive/2013/03/20/introducing-wopi.aspx
You can also refer to the following article which is about building an Office Web Apps(OWA) WOPI Host.
http://blogs.msdn.com/b/scicoria/archive/2013/07/22/building-an-office-web-apps-owa-wopi-host.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

We are trying to transfer files from PS Elements 13 to our web builder. We are getting a '?' in the top left hand corners of some of the image boxes. It seems that we are unable to transfer images with this ? on the image. We have spent a long time taki

We are trying to 'reconnect' files. we seem incapable to do so, for some reason. Try as we might, we aren't able to do it. can anyone help?

Please see other thread
Re: We are trying to transfer files from PS Elements 13 to our web builder. We are getting a '?' in the top left hand corners of some of the image boxes. It seems that we are unable to transfer images with this ? on the image. We have spent a long time

HT4910 I can't find my notes in my iCloud account. I checked my iPhone 4, and it says that they are still being saved to the iCloud. Where did they go?

I can't find my notes in my iCloud account. I checked my iPhone 4, and it says that they are still being saved to the iCloud. Where did they go?

I'm not familiar with the PC end of things, but in a recent post I read about someone using notes.exe to access notes (I'm assuming they knew what they were talking about) - would your installation of icloud app(s) include a notes program? At least do this, log into icloud.com with a computer browser and look in mail. There should be a notes "folder" listed along with the others you may have defined. Are you notes there? If not, that's the problem. Be sure notes is turned on in Settings>icloud on your device. if they are there, then it looks like the PC end is the problem - but I can't provide help concerning that.

Where to put XSDs in the local Web(HTTP)Server so that they are visible ?

Similar Messages

Maybe you are looking for