Where to set USE_SHARED_SOCKET

Hi,
i am using windows but i dont know where exectly i should enter this USE_SHARED_SOCKET=TRUE. Is it in a registry of windows in LOACAL_MACHINE or in init.ora file. I have tried to enter this parameter in init.ora which caused illegal action. then i enter it in the registry under LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\oraclehomeLISTNER but still not any effect. Please tell me where to mention this optional parameter.
Thanks
Usman Rana

USE_SHARED_SOCKET is an optional init parameter.
USE_SHARED_SOCKET
You can set parameter USE_SHARED_SOCKET to true to enable use of shared sockets. If this parameter is set to true, the network listener passes the socket descriptor for client connections to the database thread. As a result, the client does not need to establish a new connection to the database thread and database connection time improves. Also, all database connections share the port number used by the network listener, which can be useful if you are setting up third-party proxy servers.
This parameter only works in dedicated server mode in a TCP/IP environment. If this parameter is set, you cannot use the 9.0 listener to spawn Oracle7 release 7.x databases. To spawn a dedicated server for an Oracle database not associated with the same Oracle home as the listener and have shared socket enabled, you must also set parameter USE_SHARED_SOCKET for both Oracle homes
Joel P�rez

Similar Messages

Setting USE_SHARED_SOCKET for Solaris

Hi,
How do I set USE_SHARED_SOCKET or equiwalent which will serve the same purpose on Solaris box? I need to use oracle client behind a firewall.
Regards.
Message was edited by:
With or without USE_SHARED_SOCKET I need to use oracle client behind firewall. Or to be very specific, I need the listener to reply to the client on the same port from where the client sent the request to connect.

PLease advice me as to where should I post this query. I have been waiting for quiet long now and nobody could answer me yet.

WRT120N - Can't find where to set DNS I want it to use

I bought WRT120N to replace a Netgear I had.
I cannot find in the management console where to set the DNS servers I want it to use.
Can somebody please give me the drill-down to find it.
Solved!
Go to Solution.

I have no idea how I missed that.
Well, yes I do. The word STATIC threw me off. I had just never seen the DNS entries described that way before, although it is technically correct. I just think of static addresses as those you assign to your own devices on your own network.
Anyway, thanks.

Where to set "module load option"

I have been checking one teststand sequence file and I got a message to change the module load option to dynamic load module....but I simply couldn't find where to set it. please help me with any input. thanks a lot

found it..

The scroll motion where I set the fill is only scrolling down

The scroll motion where I set the fill is only scrolling down, even when I set it to go up. Has anyone else expereinced this? Can you help me correct this?

Hi Crystal,
Could you please explain in details what you have done so that I can test it out at my end? Is there a live page where I can check the issue? Can you create a trial site on BC and then show it to me so that I can investigate the issue further? Thanks.
- Abhishek Maurya

Where to set up DMEE default file name

Dear all,
I create a new DMEE format and I can download a file from FDTA.
However, the default file name is "A:\ (DMEE format name)".
Where to set up the default file?
I want to make default file name like this "C:\DDMMYY_BANKNAME.IMP" .
Thanks for your help in advance.

Hello Seung Dam,
Below are the steps.
OBPM4 > select the respect payment medium format > place the cursor on the u2018Sel. Variantu2019 input field > click Edit > Edit variant.
Under Output Control section > activate the u2018Output to file systemu2019 and enter default file path in the u2018File nameu2019 input field.
Please try the above mentioned and let me know if there is any question.
Good luck!
Kind regards,
John Chin

I wander where to set import job for transports

I wander where to set import job for transports to be imported automatically. On transport domain controller I can not manage other job than the one for the system itself.
On the system which is not transport domain controler I have only display function

are you asking for 'automatic import' in QAS/PRD ?
When you go to STMS import queue in a particular system like QAS, there you can see a button 'import all'. This will enable to you schedule automatic import periodically in intervals for eg. 15 min or whatever you want.
just click on import all and it will ask for inputs and schedule
OR, do you want to confirm for RDDIMPDP job ?
Run report RDDNEWPP to schedule RDDIMPDP
Edit: Note 11677 - Transports with event-controlled RDDIMPDP

Persistence Layer Analysis - where to set Maximum Number of tbale entries?

Hi gurus,
I need to increase this value. Can you please let me know where to set it up?
Thank you. Olian

Hi Olian,
Open table SXMSPMAST in se11 and goto technical setting set the value Size Category to 6 or 7 from default value 4 according to ur req.
Thanks!

Contact sheet: where to set size & can I print with another software?

Using contact sheet for first time. nice! Blows away Photoshop just as the LR web galleries blow away all others.
Question: I cannot find where to set the print size, I want to do 11x14
Also can I save the file and print from Imageprint?
The help page online talked about templates. I don't see them. Thank You.

Thanks ... tried the Paper Handling, but no lock.
Based on the fact that any scaling, "moves" the image down and to the left on the paper ...
Th only "work around" solution is to ...
Rotate the PDF page 180, then scale slightly (90% or so ...)
This pushes the upside down page, down and to the left.
While this is the opposite of what is desired, the print is then correct when
it is punched and placed into a three ring binder.
Assumption is the application that creates the documnt, needs to have the paper margins set. The reality is, an application like Preview, that does not "create anything", needs to handle existing documents PDF, JPEG and print to Custom Page configurations.
ie: In Preview, Custom Page does not work correctly,
Thanks allfor the comments and help ...

Where to set assign CO when calcalate depreciation (AFAB)

now i have CO (Cost center )in each assets .
but when i run depreciation AFAB
it's not calculate depreciation to CO
where to set Cost center ?
please help.

Hi,
try in t-code : ACSET.
hope it can help.

Where to set timezone bettween EBS 12 installation

when I finished EBS 12 installation,
I detect the time zone is not suitable, that is the database time zone(select dbtimezone from dual) is different from local timezone (select systimestamp from dual).
for EBS12 installation, I did NOT find where to identify the timezone. Can you tell me where to set timezone , thanks!

Please see (Globalization Guide for Oracle Applications Release 12 [ID 393861.1]).
Thanks,
Hussein

Where to set Java system parameter for embedded WLS in JDev 11g?

Hi,
I am trying to test web service invocation via JAX-WS proxy generation on Jdeveloper 11g.
When I test client code, I got following error message.
Exception in thread "main" java.lang.Error: Jaxrpc 1.1 method is not supported.
at weblogic.webservice.core.rpc.ServiceFactoryImpl.loadService(ServiceFactoryImpl.java:65)
From a forum discussion, it was suggested to add following java parameter in the path.
-Ddebug=true -Djavax.xml.rpc.ServiceFactory=oracle.j2ee.ws.client.ServiceFactoryImpl -Djavax.xml.soap.SOAPConnectionFactory=oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnectionFactory -Djavax.xml.soap.SOAPFactory=oracle.j2ee.ws.saaj.soap.SOAPFactoryImpl-Dweblogic.log.Log4jLoggingEnabled=true -Djbo.debugoutput=console
I can not find where to set this parameter under "Tools"->"Preferences". Is there any place in IDE that I can set this value?
Thanks for the help,
Jim

The parameters are defined in the Run configuration of your application. You find the Run configuration in the project properties under run. Open the 'Default' configuration, there you find the java properties where you put the parameters.
Timo

Where to set config "Tax jurisdiction" in configuration ?

Hello everyone.
I am in Thailand .
my SAP system donot need tax jurisdiction . where to set configure for not using Tax jurisdiction in the system ?
please help.

Hi,
You need to make setting in customizing OBCO and OBCP.
Regards,
Gaurav

Where to set mail.jar,activation.jar

Hello
I want to know that
Where to set the path of activation.jar,mail.jar files
I am using jsp So plz tell me where i have to save these files
So that server will access
pla help
Shilpa

If you are using JSP then they should already be in your server. Don't put them anywhere.

Where to set sending of e-mails for dunning documents

Hello
Does anyone knows where to set sending of e-mails for dunning documents. They are being printed out but e-mail is not being sent.
Generalyy e-mail sending(trx scot) is set.
I guess it is pure Fi settinng to send e-mail as well. Could anyoune help
Thank you a lot in advance
Jan

Hi Jan,
Please refer SAP note
1042992 - Dunning by mail w/ SAPscript: Introductory text w/ attachmnt
Also refer SCN document
SAP FI Dunning Procedure customization and Functionality
Refer section
Activate the dunning via E-mail (To receive letter by mail)
Dunning letter output can be in two forms.
1)        Email
Manual Print out
H         Hope this helps.
              Regards,
             Deepak Kori

Where to set USE_SHARED_SOCKET

Similar Messages

Maybe you are looking for