Where we maintain the cost of characteristics values in variant conf.

Hello guys,
This thread i have posted many times in sdn , but never got the satisfactory answer.This time again i am trying my luck.
    Actually i am unable to understand how costing takes place in variant configuration.
    Suppose i have created one sales order for configurable material and there we select all the characteristics values which we want.
But we don't maintain the prices of these characteristics values anywhere.So when i create the sales order than how the sales people calculate the cost of that order.
    Take a example of computer.For making computer,i want cabinet, processor, Harddisk, Ram, which are available in many sizes.So What we do that we create one configurable material and inside it we maintain all this characteristics and its values.And then i create one sales order for that configurable material and select the suitable characteristics and its values as reqd my customer.
     Now my question is how they cost that sales order?As we don't maintain the Accounting and costing view in material master of configurable material.
   So where to maintain the prices of these characteristics values?
        Plz guide.

Hi
You can make the price of a variant dependent on the characteristic values assigned (Pricing).You can use
variant conditions to define surcharges and discounts for a variant
Variant u2013Pricing steps
Create condition record
create a procedure where you enter the reference from the characteristic
Assign the procedures to either the characteristic values
configure the material in the sales order
The net price for the material is displayed
If a value that triggers a variant condition is selected when configuring a material in a sales order, the price of the material displayed under Net value is automatically increased or reduced.
In addition, the Conditions pushbutton is displayed.
On pressing this pushbutton,
One can see which conditions have
influenced the price.
I tried to list you as much detail as possible. Hope that you will be able to resolve your issue
Thanks

Similar Messages

SAP PP: In BOM how to where to maintain the details like Length, Width and Quantity

Dear All,
In SAP PP where to maintain the details like Length, Width, Quantity of the material for production information.
Eg:
Client will procure a material of 10milli meter Thickness Mild Steel material of fixed dimensions lets say 4meters x 4Meters
{so the material dimensions are 4000Milli Meter (Length) x 4000Milli Meter (Height) x 10milli meter (Breadth) Mild steel Sheet}
For production the above plate is to cut into desired sizes as per the drawings given by Design Department of "N" no qtys.
(let say in drg for the component the desired sizes are 1000Milli Meter (Length) x 1000Milli Meter (Height) x 10milli meter (Breadth) of 4Nos}
In BOM where all we can maintain the above details. The same details wants to send it to production for their quick reference.
Also how the system will calculate the weight automatically for procuring of raw material with the above details.
Note: Purchase department will procure the full length as i mentioned above but not the desired lengths to be produce for production.
Pls let me know if any further information required for the solution to suggest.
rgds,
VKUMAR A

Hi,
You can use two options...
1. Classification...create characteristics like length, height and breadth with CT04, assign these chars to class (CL01) and assign this class to your raw material in classification view in material master (MM02). When you receive the material from vendor during GR enter the values for characteristics. (activate Batch management).
Now when you create the Production Order, in the components for this raw material, assign the batch..
When this is issued against the Production order , production people can see the details of values in the batch...
2. Try to explore the option of variable size item concept during creation of BOM..
Thanks
Kumar

FI:where to maintain the data of "Group account number"?

Hi.When I use the T-CODE FS00 to create G/L account,the sap require me to Make an entry in field "Group account number".But when I press F4 on the field "Group account number",the sap tell me there is no values.So I need to maintain the data of "Group account number".But I don't know where to maintain the data of "Group account number".So I need someone give me the T-CODE or some advice.Thanks so much.

Hi,
You have activated group account number. If you have any grp account number of your company please provide the group company account number.
Else if you dont want to give group account number
In T-code: OB13 remove group chart of accounts from your chart of accounts
Best Regards
Ashish Jain
Message was edited by:
Ashish Bohara

Where we maintain the CST & VAT numbers for a plant which is not a register

Hi All,
Where we maintain the CST & VAT numbers for a plant which is not a registered for Excise?
we are printing it on the invoice output. on debugging it is known that it comes from the table AUSP, after checking the table CABN.
Any body knows about these two tables? let me know the purpose of these tables
thanks in advance,
Venkat

Mr Big Screams.....
I hope you have neigther read my reply completely nor understood correctly.
Let me tell you, maintaining record in J1ID in Plant address details doesnt declared that plant is registered under Excise act until unless you maintain ECC details. ( ECC -Excise Control Code number which will be alloted by the Central Excise dept).
You will find CST / VAT fields in J1ID which is actually given to maintain Plant address details for INDIA localization.
Hope its clear.
Regards,
Reazuddin MD

Where to change the cost center in material document?

Hi everyone,
I have a problem. Last month, I've created a new business area, with its own division and cost center.
In the test client, the whole process of creating requisition, PO, goods receive, cancel goods receive (return to vendor), create sales order, delivery and goods issue went well.
But, today, when one of my users tried to cancel goods receive (movement type 102), the following error message was displayed:
KMXX/KM11 CTR belong to business area M110 not M140.
Since the PO was created for a stock item, there is no account assignment, so I am wondering if I have missed out something in configuration, especially in defining account assignment for automatic posting? Can anyone help?
Thank you very much.
Anisah

HI,
There should have been some changes done in the system after thr initial docs were created.
Please ensure that the said cost centre of interest is assigned to the appropriate Business area.
The error seems to be an invalid combination of the Business area to the cost centre.
If not then please maintain the same.
Hope this helps.
Regards,
Prasanna
Award pls if helpful.

How to control the Cost Center incurred value posted from many transactions

In KP60, cost center wise , element wise budget is allocated .i.e planned. Ex: 450000 is assigned and saved.
Now ex: in FB60, when we post a vendor invoice having the value greater than the above value, system should not allow.
Like this, the cost to the cost center can be incurred to the cost center not only in FB60 , but also from many transactions.

Is it possible that you mean KP06? (not KP60???)
Because if this is the case KP06 is only for planning...not budget.
Please clarify..
Pan

Where are maintained the file attachments in sap?

If a create a document in FB60 and after I create an attachment for it, I wonder: where does sap maintains the file attached? Is there a table or a folder with a directory?
Thanks for help
Gandalf

Hi,
if you are using this path Extras--> Texts then;
Object = BELEG
Name = <company code><document number><year>.
If the hint is usefulu2026 Say thanks by rewardu2026.
Regards,
Prabhu Rajesh

Where to maintain the user defined variables in Variant maintenace?

In the variant maintenace screen, ther is provision for
Type T - Table TVARVC entries
Type D - Dynamic for date and time fields
Type B - user defined
My question :
Where do you maintain the user defined variables?
Pl advise.
Thanks,
Ven

You may need to look into this link ( Its sap doc link)
http://help.sap.com/saphelp_nw70/helpdata/en/c0/98039ee58611d194cc00a0c94260a5/content.htm
a®

In ODI where we maintain the folders for a file system

Hi all
For file system,I have to maintain different type of folders in Dev server.for example
Input,Process,Error,Log,etc..Where we going to maintain these folders in the devlopment server?
Can you be clear about the File system is maintained in the ODI environment?If pleease give any specified PDF.
Regards
suresh

Hi Suresh
To try to help you, could you give more details about what exactly you need?
I couldn't understood what you need to know....
Cezar Santos
[www.odiexperts.com|www.odiexperts.com]

Question on maintaining the ordering of facet values - On facet selection

We have a scenario in our Project where in the facet values could be ordered via workbench
Below example considers the sorting of size facet through workbench
Scenario
Let’s say the facet values displayed for Size facet as below on page load (Ordered through workbench)
Small
Medium
Large
Now user selects say Medium . This will now be available in descriptor list . On merging both the descriptor list and refinement list. The order would be something as below
Medium (Selected)
Small
Large
Is it possible through some endeca api to get the facet values as per the initial order defined (Depicted below)
Small
Medium (Selected)
Large

Well, getting a complete list of organizations is not my problem. I have been able to do that easily enough. Then by using the IN condition, a user can input mutliple values. Ahh, but here is the problem. Many of the people who will use this report will NOT have an understanding of the organization structure. If they are picking at a high level (say at a region level), they will not know all of the names of the child organizations below that level (and could be taking tens of orgs to maybe a hundred organizations). That is why the user requirement is that if a user enters a parameter value of 'B', that means the program is smart enough to figure out that what they really want are values 'B', 'E', 'F', 'M', 'Q', and 'Z' as their selection list. What you have suggested is what I have offered as a potential solution, and is how I have currently set up the workbook. Which may be as close as we can get. But the ideal solution would be to give the users what they have stated in their requirements document - that way the report users don't have to know/understand the hierarchy and where all the organizations fit in the hierarchy. Make sense what I have said here? Would be nice to have the cascading parameters to handle this, but right now the database is not set up to be able to do cascading parameters. And the structure is potentially changeable at any time (so might add a new level), which no doubt is why Oracle set up the structure hierarchy as it did.
John Dickey

Same Batch Number with different characteristics value

Dear Gurus,
I have the following scenerio:
The finished goods should be maintain in batch with external number and at the time of confirming the finished goods in co11n the client want to capture the finished goods value like length, width and diameter.
So we propose the batch characteristics with class type of 022 for finished good and we maintain the character as length, width and diameter under the batch class 022 and assign the batch class in finished good classification view.
Now the requirement is we want to capture the batch characteristics value length width and diameter with same batch number for multiple confirmation.
Example:
Confirmation      Batch number               batch Class               Length     width     Diameter
1                        1000                              022                              100        50             20
2                        1000                              022                              120        25             10
3                        1000                              022                              150        70             30
Now at present we are trying to capture the batch characteristics with same batch number but our standard system will not allow to maintain the different batch characteristics value under same batch number. If we overrite the batch characteristics in msc2n transaction the last value maintained be copied to all batch number. but we want same batch number with different batch characteristics value.
Please share your idea and try to solve..
Regards,
Vimal

Dear Vimal,
It is not possible to maintain multiple batch characteristics in one batch.
Work around is to create original batches and assign to your production order. During CO11N, generate one batch per confirmation. There is a report in batch information cockpit to link between original batch and batch per confirmation.
Rgrds,

Is it possible to have Auxiliary Cost Component as Value Fields in COPA

Respected Gurus,
Is it possible to have Auxiliary Cost Component as Value Fields in COPA - Please Advise?
Thanks
PM

Hi Praveen ,
It is possible.. in Transaction KE4R .. we have to specify the cost component structure .. where you map the cost components with value fields..
Please use your auxiliary Cost Comp Structure in KE4R to achieve your purpose
Regards
Sarada

How to maintain the characterstics of the values tab of limits maintain.

Hi SAP ALL,
Hi how to maintain the characterstics point of valu scales maintain activally i want the P R release authorsiation limit increase.
Thnaks

The Class Type of PR & PO Release is 032 and for Class Go to SPRO-MM-Purchasing-Purchase Order-Release Procedure-Release Strategies and Here you will find the Class.
Else Go to Release Strategies-classification using the same above path and Change the Chareceteristic Values and Save.
Regards,
Ashok

Cost center planned values to profit center

Hi All,
Can anyone help to know the customization setting where the cost center planned values are automatically moved to profit center...
Blessy.

Hello,
Can you please check:
IMG => Controlling => General Controlling => Organization => Maintain Versions
Select your version and click on
"Settings for Profit Center Accounting"
See whether "Online transfer" has been check for each year.
In 0KE5, check whether year and activity indicator has been ticked.
Also check in GB02 whether document numbers are maintained for local documents.
Regards,
Ravi

From which table characteristics value is been picked in Batch(023 class)

Hi gurus,
Could anyone helpme out of this problem
While creating migo ,batch no gets automatically assigned for the material when I click on the check button and then clicking the classification screen , characteristics value have to be given manually for the material that is to be receipt in migo.
Now My problem is I am creating a report where the material no along with the batch no and the characteristics value of the batch is required , but I cannot get the table name
I have tried with mcha,mch2,mch1 but here no characteristics value could be derived ,Table Cawn,cabn is there but how to link with other tables like mseg or MKPF.
In table AUSP characteristics value is picking but same problem how to link it with mseg or mkpf etc.
Guys please help me out of this.
Thanks N regrds,
Siddhrtha

Hi
CABN Characteristics ( o.a. batch/vendor)
CABNT Characteristics description
CAWN Characteristics ( o.a. material)
CAWNT Characteristics description
AUSP Characteristic Values
Class types and objects :TCLAO Several class types for object
TCLA Class types ( vb. lfa1 => v10 en 010)
TCLAT Class type text
TCLT Classifiable objects
TCLC Classification status
Regards

Where we maintain the cost of characteristics values in variant conf.

Similar Messages

Maybe you are looking for