Whether it is impossible to get a lob locator by a select condition sql?
Hi,
guys, i have tried many times, in oraclc, if i insert a row into a table with lob object, for example, the clob. i can get the lob locator back by a reset which come from stmt.execute (select_sql) clause.
however, if i insert thus record with other tools, for example, the sql_plus, i will never get the locator back even if i have commit it, it always said that it is a DBMS_lob ERROR while i connect a write stream to it.
wer ist das? could somebody give me some tips?
thank you in advance.
jedy borris
null
seems i got it: for update,right?
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by frederick zora ([email protected]):
Hi,
guys, i have tried many times, in oraclc, if i insert a row into a table with lob object, for example, the clob. i can get the lob locator back by a reset which come from stmt.execute (select_sql) clause.
however, if i insert thus record with other tools, for example, the sql_plus, i will never get the locator back even if i have commit it, it always said that it is a DBMS_lob ERROR while i connect a write stream to it.
wer ist das? could somebody give me some tips?
thank you in advance.
jedy borris
<HR></BLOCKQUOTE>
null
Similar Messages
-
Azure outage for 4 days. Impossible to get support
Azure Managed Cache has not been working properly since July 16 (4days) as per their own status.azure.com website (see below). Trying
to get support or updates seems to be impossible.
Reply I just got from MS Azure: "... there is no direct way
to contact the technical team though an email or contact number.... You can review this blog post for further details -
And here the outage notification on their website "status.azure.com" , which we found by chance, no direct communication to date:
Starting 16 July, 2014 15:30 UTC a limited subset of customers may experience intermittent connectivity failures to
their Cache resources. Our Engineers have determined that this issue is not widespread. Recovery status updates will be communicated to Managed Cache customers through their Azure Management Portal.
FYI: we spend >$500 per month with them...Azam,
Following this link leads to a dead end. It looks like unless we sign up for a premium contract or something we can only submit tickets concerning billing queries.
So we have now a situation where a service for which we pay $500-1000 a month for has an outage and it is close to impossible to get any support, updates or assistance whatsover.
It can be a very frustrating experience dealing with Microsoft... -
Anyone else finding it impossible to get iCloud to work? My software is up to date, I'm looged in to my account but nothing synchs across my Mac Mini, Mac Air and iphone 4s. I've tried all the trouble shooting solutions without success. Any ideas out there?
Hi
My iCloud works perfectly across my MBA, iPhone 4, iPad Mini etc. I did find it easier when starting to set things up to start with one item to sync.
I started with Reminders and went through all the General settinsg as well as Reimnder specific settings. Then just parlayed that process into each app I wanted to sync.
Happy to help out if you want to get started.
Iphone
1. Settings
2. Icloud (ensure your apple id is correct)
3. Reminders = on
MBA (connected to the Net through wireless)
1. Settings
2. Icloud (ensure apple id id corect and the same as on your iphone)
3. Calendars and Reminders = On
Type a new reminder on your MBA...
- your iphone should be updated. My iphone updated in less than 1 sec after I keyed it into my MBA
Let me know if this works -
Impossible to get January Software Upgrade?
Is it really impossible to get the January Software Upgrade if I don't reside in a country with an iTunes store?
Hi Firewhisky,
Actually it is. Sorry!
However, if you have any friend that resides in one of those countries, and you visit him, I think it would be a great chance to get it on your iPod!
Hope this helps!
!http://signatures.mylivesignature.com/54486/122/A57996D55BE7ABB4A67DE686D381A27 4.png! -
Whether the table 'B' will get update
Hi Guys,
In forms 6i , i have code like, when hitting the save button, on-insert trigger in block 'A' should insert data into table 'A' and the same time on-insert trigger in block 'B' should update data in table 'B' . The question is whether the table 'B' will get update, if any exception occured in table 'A' through any database trigger on table 'A'. there is no rollback on block 'B' , but exception is handling in blcok 'A'.
please help me.
thanks
SebanYou Need to define seperate session by using autonomous transactions,it allows you to leave the context of the calling transaction, perform an independant transaction, and return to the calling transaction without affecting it's state.
SQL> CREATE TABLE a (id NUMBER(2))
2 /
Table created.
SQL> CREATE TABLE b (id NUMBER(6))
2 /
Table created.
--Table a column id has 2 digit constraint
SQL>
SQL> CREATE OR REPLACE PROCEDURE test (p_a NUMBER) AS
2 PRAGMA AUTONOMOUS_TRANSACTION;
3 BEGIN
4 INSERT INTO b (id) VALUES (p_a);
5 COMMIT;
6 END;
7 /
Procedure created.
SQL> SELECT * FROM a
2 /
no rows selected
SQL> SELECT * FROM b
2 /
no rows selected
Here i am forcly inserting 3 digit number into table a column ,which will raise exception and the same will allow in table b which has 6 digit number.
SQL> BEGIN
2 INSERT INTO a VALUES (100);
3 EXCEPTION WHEN OTHERS THEN
4 test(100);
5 END;
6 .
SQL> /
PL/SQL procedure successfully completed.
SQL> SELECT * FROM a
2 /
no rows selected
SQL> SELECT * FROM b
2 /
ID
100
SQL>
-------------------------One more example---------------
SQL> DELETE b
2 /
4 rows deleted.
SQL> COMMIT;
Commit complete.
SQL> CREATE OR REPLACE PROCEDURE test (p_a NUMBER) AS
2 PRAGMA AUTONOMOUS_TRANSACTION;
3 BEGIN
4 INSERT INTO b (id) VALUES (p_a);
5 COMMIT;
6 END;
7 /
Procedure created.
SQL> BEGIN
2 INSERT INTO a VALUES (10);
3 INSERT INTO a VALUES (100);
4 EXCEPTION WHEN OTHERS THEN
5 test (100);
6 ROLLBACK;
7 END;
8 .
SQL> /
PL/SQL procedure successfully completed.
SQL> SELECT * FROM a
2 /
no rows selected
SQL> SELECT * FROM b
2 /
ID
100
SQL> BEGIN
2 INSERT INTO a VALUES (10);
3 INSERT INTO a VALUES (100);
4 EXCEPTION WHEN OTHERS THEN
5 test (100);
6 END;
7 .
SQL> /
PL/SQL procedure successfully completed.
SQL> SELECT * FROM a
2 /
ID
10
SQL> SELECT * FROM b
2 /
ID
100
100
SQL> Khurram -
I have an old female.net account, which I want to manually add to my iPhone. However I can't find all the necessary settings to be able to do so. Can anyone help ? the provider, EE, has proved impossible to get anything from.
Well, in that case, you need to log into your account at female.net and get the mail setting from there.
Mail accounts have nothing to do with your carrier - they just provide your phone connection, so it's not really surprising that EE were not helpful, because this e-mail account has nothing to do with them.
Go to female-net and get the mail setting from there because the account is with them. -
I followed the instructions but it seems impossible to get data from PC to iTunes.
What could be the problem?What data?
Any error messages?
Exactly what instructions? -
Its near impossible to get a Advanced datagrid to remember its opened nodes when it has fresh data
Theres a post in
http://www.mail-archive.com/[email protected]/msg85521.html//www.mail-archive.com/[email protected]/msg85521.html
which is basically saying its near impossible to get a Advanced datagrid to remember its opened nodes when it has fresh data
I'm having pretty much the same problem (exept I'm not filtering just getting the latest data from the server)as this guy and have been searching for a solution, heres what he said:
Sun, 02 Mar 2008 08:07:46 -0800
Hello guys,
I'm trying to filter my ADG without success :
I created a GroupingCollection from a flat ArrayCollection.
ADG's dataProvider is GroupingCollection.
First issue : refresh
if I filter the underlaying ArrayCollection, the related
groupingCollection doesn't refresh automatically (bug? feature?)
Actually I menaged to force gc.refresh() with some event( it is
impossible to listen on CollectionEventKind.REFRESH because of
infinite loop ac.refresh => gc.refresh )
Second issue (more important) : openNodes
Ok now that my gc is refreshed, the Tree in the ADG collapses itself
(ok let say that is normal), and I need it to expand all nodes that
were opened before.
I tried to do something like this :
var openNodes : Object = IHierarchicalCollectionView(
myADG.dataProvider ).openNodes;
gc.refresh();
myADG.dataProvider.openNodes = openNodes;
and it doesn't works.
next I tried this :
var openNodes : Object = IHierarchicalCollectionView(
myADG.dataProvider ).openNodes;
for each( var node : Object in openNodes )
IHierarchicalCollectionView( myADG.dataProvider.openNode( node )
guess what, doesn't work
I'm calling myADG.invalidateList() each time too.
I don't know what to do to achieve this simple task, I'm a bit
disappointed because I expected lot more from the brand new
AdvancedDataGrid and this basic functionality actually seems too hard
to implement.
I still hope I'm wrong and someone can show me the correct solution
Thank you all,
AdnanHi,
I remember the days when Oracle would practically give Oracle Financial s away just for the implementation consulting fees.
Yeah, IBM used to give-away DB2 also . . . .
Oracle Financial s away just for the implementation consulting fees. Yeah, but any ERP requires massive set-up costs. I once worked on an SAP effort that cost over $20,000,000.
complete with Microsoft head to headIn what? Oracle is far-and-away the world's most robust and flexible database, hundreds of times more powerful that SQL Server.
IMHO, it's like apples-to-oranges . . . .
Everyone is running SQL server Here, DICE shows over a hundred Oracle openings in the Boston area, that might help you:
http://seeker.dice.com/jobsearch/servlet/JobSearch?op=300&rel_code=1102&N=0&Hf=0&NUM_PER_PAGE=30&Ntk=JobSearchRanking&Ntx=mode+matchall&AREA_CODES=&AC_COUNTRY=1525&QUICK=1&ZIPCODE=&RADIUS=64.37376&ZC_COUNTRY=0&COUNTRY=1525&STAT_PROV=0&METRO_AREA=33.78715899%2C-84.39164034&TRAVEL=0&TAXTERM=0&SORTSPEC=0&FRMT=0&DAYSBACK=30&LOCATION_OPTION=2&FREE_TEXT=oracle&WHERE=Boston+MA&WHEREList=Boston+MA&SEARCH.x=0&SEARCH.y=0
Excel is the tool of choice for accountants and its integration withcubes is nothing short of stunning
Sorry, I must disagree! Yes, CPA's will download Oracle data into spreadsheets for analysis, but Excel is wanting, especially for hypothesis testing, correlational analysis and data mining. Oracle's ODM, however, is truly stunning, light-years ahead of PC-based tools:
http://www.rampant-books.com/book_2006_1_oracle_data_mining.htm
Larry make Oracle great again be cutting the costI cannot speak for Oracle Corporation, but Oracle XE is FREE, totally and completely free. Add-in Apex for free, and it's very competitive.
Hope this helps. . .
Don Burleson
Oracle Press author
Author of “Oracle Tuning: The Definitive Reference”
http://www.dba-oracle.com/bp/s_oracle_tuning_book.htm -
Impossible to get month-to-month subscription with student account - now I have to pay cancellation fee! Is there a way to switch back to month-to-month, or was I tricked into getting a yearly subscription? How do I cancel my subscription and/or switch to a monthly plan WITHOUT paying fees and WITH a student discount?
This is an open forum with a mix of program users and Adobe staff, not Adobe support... you need Adobe support
Adobe contact information - http://helpx.adobe.com/contact.html may help
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
Question
Hello from Norway with a bad Englisch.
You tell me to uppdate Firefox 3.6 on my MAC Air, it is impossible, I get to 1,5 mb than it stops, MAC support tell me that it is not posible to update Firefox when I am on Firefox, tell me hove to update, [email protected]about:crashes only lists crashes that you have reported using the [[Mozilla Crash Reporter]] which comes up after a crash. Because there are so many possible reasons for a crash, getting the crash ID really helps volunteers find the cause quicker.
That doesn't mean we can't help without a crash id. :-) No crashes here, but I'm also on Snow Leopard and using Firefox 3.6.6.
Are you using Firefox 3.6.6? The most common cause of crashes on Mac is the Flash plugin. Are you using the latest version of Flash? You can check at http://www.mozilla.com/en-US/plugincheck/
Do you remember any specific circumstances about when the crash occurred? What sites you were on? -
ORA-22275: invalid LOB locator specified
Hello,
I use Oracle 11.2.0.3. APEX 4.2.2... Listener 2.0.3 .... Glassfish server 4.0.
When I run this procedure ( that is used in this tutorial )
I get ORA-22275: invalid LOB locator specified.
The error persists over Glass fish 3.0.2, Listener 2.0.1 and 2.0.2.
Also, I installed this patch 16803775, but to not avail.
declare
v_mime VARCHAR2(48);
v_length NUMBER;
v_file_name VARCHAR2(2000);
Lob_loc BLOB;
BEGIN
SELECT MIMETYPE, CONTENT, filename,DBMS_LOB.GETLENGTH(content)
INTO v_mime,lob_loc,v_file_name,v_length
FROM image
WHERE id = 70;
htp.init;
-- set up HTTP header
-- use an NVL around the mime type and
-- if it is a null set it to application/octect
-- application/octect may launch a download window from windows
owa_util.mime_header( nvl(v_mime,'application/octet'), FALSE );
-- set the size so the browser knows how much to download
htp.p('Content-length: ' || v_length);
-- the filename will be used by the browser if the users does a save as
htp.p('Content-Disposition: attachment; filename="'||replace(replace(substr(v_file_name,instr(v_file_name,'/')+1),chr(10),null),chr(13),null)|| '"');
-- close the headers
owa_util.http_header_close;
owa_util.http_header_close;
-- download the BLOB
wpg_docload.download_file( Lob_loc );
end ;
Any help pls, in getting that procedure works ?
Regards,
Fatehreplace this statement
select empty_clob() into c_xml from dual for update;
with
dbms_lob.createtemporary(c_xml, TRUE); -
ORA-22275: invalid LOB locator specified on trigger
I have a trigger which copies a blob on insert to one table to another.
CREATE OR REPLACE TRIGGER SWZTPRO.TSWTMPI_BEFORE_INSERT
BEFORE INSERT
ON SWZTPRO.TO_TSWTMPI
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
discriminator TO_TSWCRUL.BTC_DIS%TYPE;
discriminator:=:NEW.BTC_DIS;
insert into .....
If using after insert this triggerworks, but if the trigger fails for any reason, the client does not recieve the error.
If using before insert this fails:
insert into table, use before insert trigger
ORA-22275: invalid LOB locator specified
ORA-06512: at "SWZTPRO.TSWTMPI_BEFORE_INSERT", line 108
ORA-22275: invalid LOB locator specified
ORA-04088: error during execution of trigger 'SWZTPRO.TSWTMPI_BEFORE_INSERT'
Any help would be appreciatedI have also used a varaiation tirgger to do an instead of on insert on a view and I get the following error:
ORA-25008: no implicit conversion to LOB datatype in instead-of trigger -
DBMS_LOB.CONVERTTOBLOB invalid LOB locator specified: ORA-22275
Hi all,
the following code has been working great on 11g (and apex.oracle.com)
now when I try to use this function under 10g XE
I get following error :
ORA-06502: PL/SQL: numeric or value error: invalid LOB locator specified: ORA-22275
ORA-06512: at "SYS.DBMS_LOB", line 696
ORA-06512: at "RIGHTSHOP.C2B", line 14line 14 being the line with DBMS_LOB.CONVERTTOBLOB
any ideas ?
CREATE OR REPLACE FUNCTION c2b( p_clob IN CLOB )
RETURN BLOB
is
temp_blob BLOB;
dest_offset NUMBER := 1;
src_offset NUMBER := 1;
amount INTEGER := dbms_lob.lobmaxsize;
blob_csid NUMBER := dbms_lob.default_csid;
lang_ctx INTEGER := dbms_lob.default_lang_ctx;
warning INTEGER;
BEGIN
DBMS_LOB.CREATETEMPORARY(lob_loc=>temp_blob, cache=>TRUE);
DBMS_LOB.CONVERTTOBLOB(temp_blob, p_clob,amount,dest_offset,src_offset,blob_csid,lang_ctx,warning);
return temp_blob;
END;Kr
MartinCan't reproduce
SQL> CREATE OR REPLACE FUNCTION c2b( p_clob IN CLOB )
RETURN BLOB
is
temp_blob BLOB;
dest_offset NUMBER := 1;
src_offset NUMBER := 1;
amount INTEGER := dbms_lob.lobmaxsize;
blob_csid NUMBER := dbms_lob.default_csid;
lang_ctx INTEGER := dbms_lob.default_lang_ctx;
warning INTEGER;
BEGIN
DBMS_LOB.CREATETEMPORARY(lob_loc=>temp_blob, cache=>TRUE);
DBMS_LOB.CONVERTTOBLOB(temp_blob, p_clob,amount,dest_offset,src_offset,blob_csid,lang_ctx,warning);
return temp_blob;
END; 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
17 /
Function created.
SQL> declare
2 b blob;
3 c clob;
4 begin
5 c := 'x';
6 b := c2b (c);
7 end;
8 /
PL/SQL procedure successfully completed.
SQL> and my version (also XE)
SQL> select *
2 from v$version
3 /
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production -
DBMS_LOB.ISOPEN throws the error ora-22275 invalid lob locator
DBMS_LOB.ISOPEN throws the error below error.
ora-22275 invalid lob locator
The below assume that i am getting the v_lob_length as empty. But i am getting error when it comes to DBMS_LOB.ISOPEN.
Please correct me if i am wrong.
here is my code:
DBMS_LOB.createtemporary(v_xml_clob, TRUE);
DBMS_LOB.open(v_xml_clob, DBMS_LOB.lob_readwrite);
SELECT DBMS_XMLGEN.getxml ('SELECT object_name, object_type from dba_objects where rownum <= 5')
INTO v_xml_clob
FROM DUAL;
v_lob_length := NVL(DBMS_LOB.getlength(v_xml_clob),0);
v_index := 1;
fnd_file.put_line(fnd_file.log,'v_lob_length : '||v_lob_length);
WHILE v_index <= v_lob_length
LOOP
v_read_cnt := 32767;
DBMS_LOB.read (
v_xml_clob,
v_read_cnt,
v_index,
v_chunk
fnd_file.put(fnd_file.output,v_chunk);
v_index := v_index + v_read_cnt;
END LOOP;
IF DBMS_LOB.ISOPEN(v_xml_clob) = 1
THEN
DBMS_LOB.close(v_xml_clob);
DBMS_LOB.freetemporary(v_xml_clob);
END IF;Most likely v_xml_clob is NULL so you'd rather check IF v_xml_clob IS NOT NULL AND DBMS_LOB.ISOPEN(v_xml_clob) = 1
THENbye
TPD -
ORA-22275 Invalid lob locator when using CLOB from a view
Hi,
I am having problems when passing a CLOB from a "Union all" view to a function. I get an ORA-22275 error when trying to construct an XmlType from the CLOB and
the CLOB originates from a view. If the CLOB originates from a table, eveyting works fine. Here is the code, that reproduces the problem
CREATE TABLE testclob
(field1 CLOB)
-- insert some data
insert into testclob values ('<a/>');
-- Define a clob view over some tables
create or replace view v_testclob
(field1)
as
select field1 from testclob
union all
select field1 from testclob; -- in reallity I use different tables
-- Creat a functions that proceses the CLOB
CREATE OR REPLACE
function MyFunction(v_myClob clob) return VARCHAR2
IS
myXML XMLTYPE;
BEGIN
select xmltype(v_myClob) into myxml from dual; -- the view crashes ** HERE **
-- code ommited
return 'some data';
END;
-- Try to use the function:
-- Selecting from a table works OK
select myfunction(field1) from testclob;
-- Selecting from the view crashes
select myfunction(field1) from v_testclob;
Error: ORA-22275: invalid LOB locator specified ORA-22275: invalid LOB locator specified ORA-06512: at "D_TEST.MYFUNCTION", line 6
-- I using the following version:
select * from v$version;
-- Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
-- PL/SQL Release 9.2.0.1.0 - Production
-- CORE 9.2.0.1.0 Production
-- TNS for 32-bit Windows: Version 9.2.0.1.0 - Production
-- NLSRTL Version 9.2.0.1.0 - Production The only workaround I have found is to use substr
select xmltype(dbms_lob.substr(v_myClob)) into myxml from dual; -- workaround.. but this mght trucnate my data.
What am I doing wrong?
MatejYou need to apply the latest patchset for your version of the database on your version of the operating system:
SQL> CREATE TABLE testclob
2 (field1 CLOB)
3
SQL> /
Table created.
SQL>
SQL> -- insert some data
SQL> insert into testclob values ('<Data>Testing</Data>')
2 /
1 row created.
SQL>
SQL> -- Define a clob view over some tables
SQL>
SQL> create or replace view v_testclob
2 (field1)
3 as
4 select field1 from testclob
5 union all
6 select field1 from testclob
7 /
View created.
SQL>
SQL> -- Creat a functions that proceses the CLOB
SQL>
SQL> CREATE OR REPLACE
2 function MyFunction(v_myClob clob) return VARCHAR2
3 IS
4 myXML XMLTYPE;
5 BEGIN
6
7 select xmltype(v_myClob) into myxml from dual; -- the view crashes ** HERE **
8 -- code ommited
9 return 'some data';
10 END;
11
12 /
Function created.
SQL> -- Try to use the function:
SQL> -- Selecting from a table works OK
SQL> select myfunction(field1) from testclob;
MYFUNCTION(FIELD1)
some data
SQL>
SQL>
SQL> -- Selecting from the view crashes
SQL> select myfunction(field1) from v_testclob;
MYFUNCTION(FIELD1)
some data
some data
SQL> disconnect
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
SQL>
Maybe you are looking for
-
How to initialize a replica by using Java API?
Hi, I used to initialize a replica by adding the attribute nsDS5BeginReplicaRefresh=start to the replica agreement and it works fine by using the ldapmodify commandline utility. Now I am trying to use the Java API to do the same, but I always get the
-
Email Address not visible for output device MAIL in created batch job
Issue in ECC6.0: Email Address not visible to display/change for output device MAIL in print parameter of each step in the created batch job. User wants to periodically receive report file via send to his email, so I create the batch job running repo
-
Customer subscreen on the PO item detail tab ( ME_GUI_PO_CUST)
I use the BADI ME_GUI_PO_CUST added customer subscreen ( new TAB) on the PO item detail. if PO order type is NB , the TAB can show both me23n and me22n . if PO order type is UB , the TAB can show ME23N , but can't show ME22N . Please Help, th
-
I've been using After Effects CS6 on my Macbook Pro for over a year now with no issues. However, today when I exported a video to be rendered in 1920x1080p with H.264 format, I got the worst quality final video I've ever seen. I filmed my video files
-
Get performance when key does not exist
Hello, I am using BDB version db-4.5.20. I try to get an object which is not present and the performance of this call is extremely slow. The newer versions have an exists call for the key. How can I get better performance in this case. I am using HAS