Which 3G shall I use?

Hi all, this is my first post on this forum and I am a new iPad owner and my first ever apple product and I am very impressed. This iPad is my girlfriends it's a 64gb wifi version but I am looking at getting myself a 64g 3G. I have seen that here in the uk the three network is offering the best price at £15 per month for 10g content. I am an orange user with my mobile phone but orange with the iPad seems expensive.
Ant are you guys using? And how do you find it?
Thanks in advance
Message was edited by: Adie Hughes

There's more to this than meets the eye.
Biggest factor apart from cost is whether or not a network gives reasonable coverage in most places you'd want to use it regularly on the go, otherwise it's useless.
I went with O2 as I get reasonable coverage on 3G for my iPhone and while not the best value, 3GB for £15 rolling monthly renewal with ability to cancel 24 hrs before seemed ok.
I'm currently considering trying 3.
O2 3G for iPad service has big shortcomings for me:
Internet images (safari/e-mail links) are compressed by O2 servers and are extremely poor quality - full of artefact with reduced colour depth which really spoils the experience for me. I'm paying for 3GB quota - I want full quality images even if they use more of my data allowance.
BBC iPlayer does not work on O2 3G currently.
YouTube videos are extremely low quality over O2 - considerably worse than over wi-fi for the same content.
Other posters suggest 3 does not compress images, and that iPlayer works, though YouTube quality may be reduced.
Not sure about Orange/Vodafone, as few comments though I don't think Orange compresses images.
One user noted a £150 'hidden charge' taken upfront by Orange, and he's still in dispute with them last time I read the thread - sounds like a one-off error but can't say for certain until he tells us the resolution.
Also consider some of the plans include wi-fi access at one or more hotspots, some have none.
I've already picked up a 3 microsim, but am put off by a convoluted setup process that sounds as though it's done via overseas call centre.
AC

Similar Messages

Which activity shall i use to initiate a documentum workflow under ecm connector.

which activity shall i use to initiate a documentum workflow under ecm connector.

That's not something supported out of the box.

Which BIOS shall I use for " K8T Neo -FSR"??

I bought a MSI K8T Neo- FSR board yesterday. But when I looked at the MSI web site I haven't seen ...FSR board, I only see ...FS2R board instead. So which BIOS shall I download and flash? There is also no any explanation about FSR. My board carries the BIOS V1.1. On the other hand it writes this informatin on the board; " K8t Neo 6702 rev. 1.0"

...here's the product page...I found it the other day but I can't remember how ...got lucky, I guess...
...BIOS version?..I've always used Live Update in Windows...just follow the directions to the letter...there are beta versions available in the forums...the current one is getting good reviews...

Which collection shall I use (BlockingQueue or Synchronized List) ?

I need to use a thread safe queue in my app that is under high contention - there are 8 producer threads (writing data to the queue) and one consumer (consumer is only one and it is fast enough). MAX size of the queue is fixed (configurable though). Producers keep adding and consumer keeps deleting from the queue. I want to know which collection/approach should be the ideal choice :
1. ArrayBlockingQueue
2. LinkedBlockingQueue
3. LinkedList with synchronization impl
4. ArrayList with synch impl
Edited by: radiatejava on Feb 27, 2009 11:52 AM

1. Yes, normal queue semantics are followed (ie data always removed from head and added at the end only).
2. Saying that only BlockingQueue is the option is not correct. I can also opt for normal LinkedList and ArrayList with my own sync implementation like this :
//producer side
LinkedList Queue_ = new LinkedList();
synchronized (Queue_) {
while(Queue_.size() >= 10000) {
Queue_.wait();
Queue_.addLast(msgBuffer);
Queue_.notifyAll();
And similar thing can be done on the consumer side.
3. Lastly, pls keep in mind that LinkedList or LinkedBlockingQueue impls wrap the actual objects to be addded into another Node class objects thus creating lots of extra objects that needs to be GCed as well, making the performance not as desired as we expect (extra time is spent on GC).
I want to know if there is any performance comparision available between BlockingQueues and synch List implementations.

Which D2W shall I use ?

I want to create a front end for a database holding information about different projects, the database will be simple and will be used on a web site people will be able to brows it on the web and an administrator will be able to add stuff. I would like the ability for record owners to alter just their own records but that is secondary, so would I use...
Direct to web application
Direct to web services application
Web Objects application
Display group application ?

I am just stuck with one problem , I want to have elements which can avoid duplicate and also maintain order. I am not able to find the solution...Avoid duplicates => you want a set (mathematical concept), represented in the JDK standard API as interface <TT>java.util.Set</TT> (http://download.oracle.com/javase/6/docs/api/java/util/Set.html)
"maintain order" => you probably merely want a <TT>SortedSet</TT> (http://download.oracle.com/javase/6/docs/api/java/util/SortedSet.html)
Then browse the Javadoc to find one of the multiple classes that implement those interfaces.
J.

Which system shall I use?

anyone work inside sap knows which existing system has the MI SERVER COMPONENT installed?

Hello Irene,
MI 2.5 Server Component is shipped with WEBAS 6.40.
You have to install ABAP and Java Stack. MI Server Part does not have to be deployed seperately. After installtion of WebAS 6.40 a few steps are nescessary. You will find them here:
http://help.sap.com/saphelp_nw04/helpdata/en/bb/b670bbaa991845924982155b7c3726/frameset.htm
In Mobile Engine 2.1 you also have to deploy the sync servlet and the Web Console to the J2EE on the MI server.
This is not needed with WEBAS 640 and MI2.5.
Regards
Frank Brackmann

Which RFID shall i use??

Hi ,
I am a post grad engg student. I'm planning to build a RFID with WSN system that can monitor bus traffic inside spacious bus stations, and can inform administrators whether the bus is arriving on time, early or late. This information is then displayed on the
different wireless displays inside and outside the bus station. I intend to keep RFID readers inside buses to identify stops [ the stops have tags]. the sensors[ zigbee transceiver/ or any transceiver to transmit to other transceivers to other nearby buses
and ultimately this informatio goes to a central station.
So
1 ] which type of RFID reader [range and frequency] would suit best to be kept inside buses to identify tags at stops???
and
2 ] which type of tranceiver [range and frequency] would serve best to be kept inside buses to transmit and receive data???
Can anyone tell the
1] reception range of such readers and
2] their respective cost and
3] where can i get them?

I am just stuck with one problem , I want to have elements which can avoid duplicate and also maintain order. I am not able to find the solution...Avoid duplicates => you want a set (mathematical concept), represented in the JDK standard API as interface <TT>java.util.Set</TT> (http://download.oracle.com/javase/6/docs/api/java/util/Set.html)
"maintain order" => you probably merely want a <TT>SortedSet</TT> (http://download.oracle.com/javase/6/docs/api/java/util/SortedSet.html)
Then browse the Javadoc to find one of the multiple classes that implement those interfaces.
J.

Which collection shall I use ?

Hi every one,
I am just stuck with one problem , I want to have elements which can avoid duplicate and also maintain order. I am not able to find the solution...
Thanks in advance..

I am just stuck with one problem , I want to have elements which can avoid duplicate and also maintain order. I am not able to find the solution...Avoid duplicates => you want a set (mathematical concept), represented in the JDK standard API as interface <TT>java.util.Set</TT> (http://download.oracle.com/javase/6/docs/api/java/util/Set.html)
"maintain order" => you probably merely want a <TT>SortedSet</TT> (http://download.oracle.com/javase/6/docs/api/java/util/SortedSet.html)
Then browse the Javadoc to find one of the multiple classes that implement those interfaces.
J.

Which cable (original apple usb or bmw y) shall i use to connect my 4th gen iPod photo 60 gb to bmw f10 (with com box) is it going to work with the apple usb cable and how long does it take till I can access the 33gb content via the bmw display?

Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

Basic Standard IDOC type v shall b using which is relevant to our scenario

Hello Everybody,
We need to use SAP ALE functionality to transfer the date instantaneously.
The interface is designed to transfer ABC employee's attendance & absence data to XYZ SAP instance for time evaluation and payroll transferring.
Can anybody let me know the general scenario v follow for this interface to happen.
for e.g. :
Start--> Remote system call > IDOC_INBOUND_ASYNCHRONOUS>Pass communication to the system > User ID validations-> Data in Control Records ---> ALE Services filtering --> Application IDOC saved in the Database ---> Process IDOC immediately ---> Run tht Report prgm RPTEXTPT --> Read Process Code from Partner Profile -> Posting Module-->END.
I'm using the Business Object - BUS7011,
Tables Ptex2000,PTEX2010.
Do v follow the same scenario for the CATSDB to happen in both SAP instances.
I want the Basic Standard IDOC type v shall b using which is relevant to our scenario of Payroll and Time Sheet Management.
Plz let me know.
Any pointers will be much helpful.
ThankQ
Rohini.
[email protected]

Solved myself.

Which is better?Using standardised BAPI directly or creating different BAPI

Hello all
I need to get a Customer record .Here iam using bapi BAPI_GETCUSTOMER_DETAIL . So shall i use the standardized
BAPIi in my programme directly or create a different RFC using the standard one.
Which one is a better option to follow?
Thanks in advance

Hi leo,
yes you can call bapi's from a java file ..
Sample code of how to do it can be found on help.sap.com ..
The link for the same [LINK|http://help.sap.com/saphelp_46c/helpdata/en/76/4a42f4f16d11d1ad15080009b0fb56/content.htm]
regards
Manthan.

This code executes normally in VS2014, despite the fact that an inline member function is not defined in every TU in which it is odr-used.

Consider this code:
header.h:
#include <iostream>
class A{
int i;
public:
A() : i(101) {}
void print();
void g(A&);
cpp1:
#include "header.h"
inline void A::print() { std::cout << i << '\n'; }
int main()
A a;
a.print();
g(a);
cpp2:
#include "header.h"
void g(A& a) { a.print(); }
Note that the member function A::print is defined outside its class with the specifier inline. The code executes normally in VS2014, despite the fact that the member function is odr-used in cpp2, but it is not defined in this file.
I found the following quotes from the C++11 Standard:
9.3/3:
An inline member function (whether static or non-static) may also be defined outside of its class definition provided either its declaration in the class definition or its definition outside of the class definition declares the function as inline.
3.2/3:
An inline function shall be defined in every translation unit in which it is odr-used.
7.1.2/4:
An inline function shall be defined in every translation unit in which it is odr-used and shall have exactly the same definition in every case.
The two last quotes above don't speak exactly about a member function but I believe they should be applied in this case too, as the inline specifier is a hint for the compiler to expand the function inline at the point of call. If we assume the compiler
does this inline expansion, how does it know the definition of the member function, while compiling the cpp2 file?

On 12/31/2014 12:13 PM, Belloc wrote:
C++ is supported on many different systems, with tools provided by many different vendors. Microsoft's linker happens to be pretty smart about merging identical blocks of code. Other toolchains may use linkers that weren't designed with this in mind,
and that would choke on multiple definitions of the same symbol. The C++ standard is written so that it's actually implementable, on as many platforms as possible.
Frankly I don't understand your statement above. What would be the difficulty for any compiler*that is already compliant with 3.2/3 and 7.1.2/4*, to adapt its code, so that each call to an inline function in a TU, which doesn't carry the function
definition, is simply not inlined?
That's the easy part. The "there's identical function definition in every .obj file, and the linker is expected to merge them all together" is the hard part. Normally, if you define a regular (non-inline) function in more than one source
file, you get a linker error. Microsoft's linker has a special way to mark "defined more than once, just pick any copy" block of code (see __declspec(selectany) ). Other linkers may not.
Igor Tandetnik

HT1338 What anti-virus software shall I use for my Mac OS X 10.6.8?

What anti-virus software shall I use for my Mac OS X 10.6.8?

There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac will NOT be infected by a virus, it may have other security-related problem, but more likely a technical problem unrelated to any malware threat.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful: The User Tip seeks to offer guidance on the main security threats and how to avoid them.
https://discussions.apple.com/docs/DOC-2435

Which method shall we prefer...LSMW, BDC .....

Hi Experts,
While doing database upload, which method shall we prefer...LSMW, BDC (Call Transaction or Session), BAPI, IDOc, Direct Input,
Thanks
-Sid
"Max Points For Best Guidance"

hi,
use of methods depending upon amount:
if you have run time validation while updating the data into SAP R/3 Transaction,then use BDC Call Transaction.
example : when you load the data into Sales order then you need to load the into Header text of sales order.
for this ,you have to use Update Mode 'S'.
if it is online update and if you small amount of data ,then prefer this one
2. If you have huge amount of data and then prefer Session Method.
we have one more advantage in session method...
suppose file has 1,00,000 records and the if you use all the records at time,then you will get short dump like system time exceed .
then you can split the each 10,000 records into one session and will process.
3. Direct Input method : we prefer this method only few Transaction ,
this will not applicable to when system has customer fields .

What kind of SSO shall I use ?

Hi all,
We would like to use SSO while logging on through SAPGUI, on SAP systems. The systems are running on both Unix and Windows family. It is important that, they are not attached into the domain. We are using Active Directory on Windows 2003 as domain controller. First question is, can I use SSO between cross domain Unix and Windows SAP servers. And the second question is what SSO shall I use?
Thank you

Orkun,
For this you need to take advantage of the SNC interface provided in SAP GUI and on most versions of SAP app server (later than 3.1I). The SNC interface requires a compatable GSS-API library, which you can obtain from a third part vendor. There is a library available from SAP for this, but it only works if you are using SAP on Windows. Since you have SAP on both Windows and UNIX you will need a product which supports this range of operating systems. The company I represent (CyberSafe Limited) has such a product, and you can find out about it <a href="http://www.cybersafe.com/links/snc.htm">at this location</a>. If you have any questions, or would like to arrange a free evaluation please contact me using my email address given in my SDN business card.
Thankyou,
Tim

Which 3G shall I use?

Similar Messages

Maybe you are looking for