Which address format to choose for Chinese addresses?

Hi;
In Addressbook, I'm trying to enter a Chinese address. I'm standing in Beijing, can't get more Chinese than this.
A Chinese address looks like this:
中国北京市东城区东中街20号3号楼1311 100022
Chinese addresses go from country (中国) first to apartment number (1311) in a single stream, with the postal code last for sorting.
This has nothing to do with the Address format when I choose "China" under "Change Address Format". Is there another "China" that I should select?
Any help would be appreciated -- I'd like to preserve as much of the chinese characters and formatting as I can.
Additionally, if I can manually create a format that goes:
Country-Province-City-District-address postal
... then I'd at least preserve the chinese formatting.
Thanks...
Allan
Powerbook G4   Mac OS X (10.4.8)   Addressbook 4.0.4 (485.1)

FAT is FAT32 is MSDOS
exFAT is FATex
Disk Utility select second drive media
Hit the partition tap, select big box click 2 partitions,
select 1 partition format OS X extended, select the other partition format MSDOS click Apply.
https://discussions.apple.com/message/16276201#16276201
Because you have a unusual setup, I don't know exactly how Bootcamp is going to handle it, you got to download the drivers and read the PDF.
However when you insert the Windows 7 DVD to install, you first need to change the MSDOS/FAT32 format to NTFS using the Windows disk, Disk Utility or Bootcamp won't do it.
https://www.apple.com/support/bootcamp/

Similar Messages

  • When creating a remote address in a pot or other objects you cannot use a / for a address??? my ladders addresses contain such ////// symbols for some addresses?​??

    when creating a remote address in a pot or other objects you cannot use a  /  for a address??? my ladders addresses contain such ////// symbols for some addresses???

    On the AB object, "f" is a float and cannot address individual bits.
    Otherwise, you would replace the "/" with an "_".
    Forshock - Consult.Develop.Solve.

  • Best Volume Format to choose for Scratch Disk?

    Hello All,
    Have an older internal HD (I'm assuming it's SCSI) in my MDD g4 (an 80Gb) and am planning on using it as a scratch disk for Photoshop/etc - what is the best format to choose (Journaled, Extended, etc) when making a scratch disk drive? Or does it even really matter, since there won't be data per se going to and from there?
    Thanks!

    it's actually a 76.57 Gb (on the desktop info) HD - I referred to it as 80Gb because it was the original HD that came with the MDD when purchased. Here's what System Profiler gives me:
    IBM-IC35L090AVV207-1:
    Capacity: 76.69 GB
    Model: IBM-IC35L090AVV207-1
    Revision: V2HBA63A
    Serial Number: VNVC33G3G5RGBT
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ATA
    Unit Number: 1
    Socket Type: Internal
    OS9 Drivers: No
    S.M.A.R.T. status: Not Supported
    Volumes:
    Scratch Disk:
    Capacity: 76.57 GB
    Available: 76.53 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Scratch Disk

  • Which video format to choose?

    I have a few photos that i have imported into imovie... i am wondering what video format to choose. I have to create a slideshow for a wedding reception.
    Plus i am trying to make it appear in full screen on the slideshow projector.. not have black sidebars..
    Thanks!

    Yes, of course.
    http://www.apple.com/ilife/iphoto/features/slideshows.html

  • HT3775 which Video format is best for adobe premiere CS5 and CS6

    I would like to know which video format to import in adobe CS%- CS^  because it looks like it's kind of slow. when I import the video file as mts

    FCP is a quicktime based NLE and your footage would be most compatible if with if encoded in the Quicktime Movie file format (MOV)
    As far as quality goes, DV is a codec (and not an especially high quality one), AVI and MOV are container formats and can contain a huge variety of different codecs which can vary greatly in quality.

  • Which partition format to choose to make second internal drive read/write for Windows 7

    Hi,
    I have a new Mac Mini Server 2011 and I would like to split partition my second internal hard drive to use in Bootcamp Windows 7.
    I would like to split this drive so that I can have one partition in NTFS and other half in standard MAC OS format.
    Ive gone to Disk utility to split partition this drive but I only see the Format MS Dos (FAT) and FatEX.. I dont see FAT32 ! Is this correct..
    should I choose Ms DOs FAT so that when I got back to Bootcamp Windows I can reformat this partition into NTFS?
    Thanks community..
    loving the new Mac btw

    FAT is FAT32 is MSDOS
    exFAT is FATex
    Disk Utility select second drive media
    Hit the partition tap, select big box click 2 partitions,
    select 1 partition format OS X extended, select the other partition format MSDOS click Apply.
    https://discussions.apple.com/message/16276201#16276201
    Because you have a unusual setup, I don't know exactly how Bootcamp is going to handle it, you got to download the drivers and read the PDF.
    However when you insert the Windows 7 DVD to install, you first need to change the MSDOS/FAT32 format to NTFS using the Windows disk, Disk Utility or Bootcamp won't do it.
    https://www.apple.com/support/bootcamp/

  • Which EAP Type to choose for 802.1x Wireless Policy?

    Hi everyone,
    i have a question about recommendation for EAP Type in a wireless policy:
    Which configuration is more secure/recommendet?
    a)
    Authentication Type: PEAP
    EAP Type: EAP-MSCHAP v2
    b)
    Authentication Type: EAP
    EAP Type: Certificate
    We have a working configuration with a) and could Change to b).
    Thanks,
    Andy

    Hi,
    Project a uses PEAP cooperate with EAP(EAP-MSCHAP v2) is more security/recommended.
    PEAP is a new member of the family of EAP protocols. To enhance both the EAP protocols and network security, PEAP provides:
    1. Protection for the EAP method negotiation that occurs between client and server through a TLS channel. This helps prevent an attacker from injecting packets between the client and the network access server (NAS) to cause the negotiation of a less secure
    EAP method. The encrypted TLS channel also helps prevent denial of service attacks against the IAS server.
    2. Support for the fragmentation and reassembly of messages, allowing the use of EAP types that do not provide this.
    3. Wireless clients with the ability to authenticate the IAS or RADIUS server. Because the server also authenticates the client, mutual authentication occurs.
    4. Protection against the deployment of an unauthorized wireless access point (WAP) when the EAP client authenticates the certificate provided by the IAS server. In addition, the TLS master secret created by the PEAP authenticator and client is not shared
    with the access point. Because of this, the access point cannot decrypt the messages protected by PEAP.
    5. PEAP fast reconnect, which reduces the delay in time between an authentication request by a client and the response by the IAS or RADIUS server, and allows wireless clients to move between access points without repeated requests for authentication.
    This reduces resource requirements for both client and server.
    You can choose between two EAP types for use with PEAP: EAP-MS-CHAPv2 or EAP-TLS. EAP-MS-CHAPv2 uses credentials (user name and password) for user authentication. EAP-TLS uses either certificates installed in the client computer certificate store or a smart
    card for user and client computer authentication. Comparatively, the second one is more security because public Key certificates provide a much stronger authentication method than those that use password-based credentials.
    Best Regards,           
    Eve Wang 

  • Which module do I choose for reading voltages

    Hi All,
    Could someone give me some advice in there opinion on which SCXI
    voltage module to choose please.
    I want to log analog voltages ranging from the low mvolts to volts.
    I'm looking at between the SCXI-1100, the SCXI-1102 and the
    SCXI-1102B/C. Could someone also explain the filtering rate as well,
    what effect this has on the signal etc.
    Thanks in advance
    Nat

    Hi Natalie,
    I know this is not the answer you are looking for, but probably, the best solution is to call your local NI Field/Sales Engineer and explain him/her what you are trying to do. Also, it will be easier to disscuss price, performance and other parameters that must be considered when taking such a decision.(usually, his/her e-mail/phone is in the bottom-left page corner when logging to "MyNI" account)
    Good Luck

  • Trying to check in to airline. Says I need a flashplayer. Which one do I choose for iPad

    I am trying to check in online for airline boarding pass. Says I need a flash player which is not supported by iPad. Is there an app I can get to install flash player?

    Adobe has not made a version of Flash for the iPad.
    Kappy explains why. https://discussions.apple.com/message/19446567#19446567
    5 Flash Player Alternatives http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
    Top 4 browsers supports flash player on iPad and iPhone
    http://mashtips.com/flash-player-ios/
     Cheers, Tom

  • Which ODBC driver to choose for a multi version , multi home installation

    I have a situation where I need to rollout a piece of software which connects to an Oracle 64 bit database. The client group that I need to rollout to includes a combination of Oracle8, Oracle 9 and Oracle 10. Some installations have dual 8/9 Homes and I am sure that there are other combinations.
    The software connects through either a normal oracle connection or can connect through ODBC. However, the normal connection software will not connect through Oracle below Oracle 9, So I am left with an ODBC driver. I am using the microsoft driver currently - it is very slow, but it is at least already installed on all the user pc's. However I believe that it does not work with dual homes.
    Is there an Oracle driver that would meet our needs?, i.e allow connections from version 8 to 10 with any combination of homes.

    You're right that the Microsoft ODBC driver for Oracle doesn't support multiple Oracle Homes. It also isn't updated regularly, so it doesn't support a lot of functionality that was added in Oracle 9 or 10.
    Exactly what versions of Oracle does "Oracle8" comprise. There is a world of difference between having some 8.1.7 databases still in prod and having some ancient 8.0.4 databases around. Depending on the "Oracle8" variants in the world, you should be able to use either the 8.1.7.x or 9.2.0.x Oracle ODBC driver should work for you. You'll need to install an appropriate Oracle Home for that driver (i.e. the machine will have to have an 8.1.7 Oracle Home if you're going to use the 8.1.7.x Oracle ODBC driver, it'll need a 9.2 Oracle Home if you're going to use the 9.2.0.x Oracle ODBC driver). Since 8.1.7 has been desupported, I'm hopeful that you can use the 9.2.0.x Oracle ODBC driver since Oracle 9.2 will at least be supported a few more months.
    Justin

  • Which video formats will work for sure in FrameMaker 11?

    I have done multiple test with somewhat discouraging results now. I want to embed a small video file in a FrameMaker 11 file and have it work in pdf. But even though this features should be able to work in both FrameMaker 10 and 11, my results are poor to say the least. I have tried multiple videoformats and sometime I am in luck and the video embeds and works, but most often it does not embed or it opens somewhere else on the page than the place where it was inserted. Is there a best practice for embedding video regarding file formats, distiller settings etc. I have spent several days now trying to make this work the way it is expcted to.
    regards
    Bjørn

    I am looking at a new project where I will have to do exactly this, so I am also interested in an answer to studiosm's query.
    Thanks,
    Laurie

  • Which wifi adaptor to choose for T410s?

    Hello,
    I am now ordering a new T410s and I don't know what the real (not on paper) difference is between these four choices:
    ThinkPad b/g/n
    Intel Centrino Advanced-N 6200 (2X2 AGN) [add $20.00]
    Intel Centrino Ultimate-N 6300 (3X3 AGN) [add $40.00]
    Intel Centrino Advanced-N + WiMAX 6250 [add $55.00]
    Is it worth it for me to pay some extra $20 or $40? Theoretically these adapters can work faster when plugged into a fast network, but doesn't it ultimately depend on the internet provider? and is there a real-life difference between these? I use comcast at home but I take my laptop to university where I work everyday. The university has an all-campus coverage but for some reason i get a very weak signal in my office. Would the 6200 help me solve this issue? Is it worth the money? Thank you,
    Christina

    Two high end manufacturers that haven't been mentioned, Metric Halo and RME:
    http://mhsecure.com/metric_halo/products/hardware/uln-2.html
    http://www.rme-audio.de/en_index.php

  • Font size varies a lot while answering email no matter which email format to choose from settings

    while sent the font is ok, just the view while composing gets big sometimes, changes in settings affects only some email, can not make the difference what it depends from

    Three suggestions:
    1) Use plain text.
    2) Install [https://addons.mozilla.org/en-US/thunderbird/addon/stationery/ Stationery] and set up a template.
    3) Install [https://nic-nac-project.org/~kaosmos/realborders-en.html QuoteAndComposeManager] and set its "stabilize predetermined font" option.

  • Customize the address formats for internetsales application of B2C

    Hi Experts,
    Please explain me how to create new address formats for Internet sales application of type B2C.as of now currently we have only 2 address formats.i,e 1) US Address 2) EU address.
    I would like to create more address formats..
    Please suggest me
    Thanks and regards,
    Kiran

    Hi,
    I doubt you can create more address format types. There is no T-Code/Table etc to create a new one.
    Please follow this: SPRO >CRM > Web channel > E-Commerce > Define Address Format
    SAP Help says
    In this Customizing activity, you define how addresses are displayed in Internet Sales.
    Two address formats are currently supported. These are the European standard address, and the USA address. The address format is defined using the address layout key for the country of the sales organization, which is in turn determined using the shop variant.
    In this activity, you can maintain the assignment of address layout key to address format.
    Sateesh Chandra.

  • Address formating in Script

    Hi,
    I wanted to know How the control will format the address of particular customer between ADDRESS...ENDADDRESS command.
    I wanted to know where the ADDRESS format is maintained for different countries.
    Pls let me know asap.

    Hi,
    The table is T005, field ADDRS.  The meaning of this code is held in T005A.
    Regards,
    Nick

Maybe you are looking for