Address formating in Script
Hi,
I wanted to know How the control will format the address of particular customer between ADDRESS...ENDADDRESS command.
I wanted to know where the ADDRESS format is maintained for different countries.
Pls let me know asap.
Hi,
The table is T005, field ADDRS. The meaning of this code is held in T005A.
Regards,
Nick
Similar Messages
-
Script to enforce IP address format
Greetings,
In Acrobat XI Pro, in order to ensure the user enters a properly formatted IP address, I have the following JavaScript called from a text field's properties, Format tab using a custom format script.
// Validate IPv4 address format
var ipAdr = getField("PHYSICAL IP ADDRESS");
if (event.value!=null && event.value!="") {
var re = /^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$/;
if (re.test(ipAdr.value) == false) {
app.alert("Please enter a valid IPv4 address");
event.target.setFocus();
This appears to be working, though I am wondering:
(1) Is it ok to not have an else clause?
(2) Can the RegEx be improved?
The RegEx is trying to enforce the standard IPv4 dotted decimal notation that does not include the subnet mask.
Thanks!Many thanks Gilad, just one quick one...
Any thoughts on the 'if' with no 'else'? Or is it just a subjective preference? -
Address Book - Changing the address format?
A couple of years ago I imported all my old contacts into address book. I've now discovered that I had the address format set to USA in preferences and I'm a UK user. I've since changed the preference to UK but it this only affects new addresses that I add.
Is there a way to change those old addresses to UK format? I've tried exporting a V card and re-importing but it doesn't change.
TIA, SteveHi Steve, and a warm welcome to the forums!
I'd take a look at Barney-15E's Script here for converting to gb/uk...
http://discussions.apple.com/thread.jspa?threadID=764832 -
Good Day.
I am new to SDN and posting for the first time.
I want to print vendor address in SAP SCRIpt Form.
I have vendors from all over the world and the address format is different in each country.
I want to know if there is anything using which I can display the address as per the country specification.
thank you in advance.ADDRESS-ENDADDRESS will print address depends upon the receiver address standards. IN order to solve your problem, I suggest two ways.
1) In sapscript
/:ADDRESS
/: ADDRESSRNUMBER = W_ADRNR
/: COUNTRY 'DE'
/: FROMCOUNTRY 'DE'
/:ENDADDRESS
and from prorgam pass W_ADRNR from ADRC. It will print entire address.
http://help.sap.com/saphelp_40b/helpdata/en/d1/803238454211d189710000e8322d00/content.htm -
Address formatting in Cheque printing
I am doing an enhancement on Cheque printig to change the address format.I coded a perform to call a subroutine to which i am giving the address number and retrieving the address as ADDRESS-END ADDRESS is causing some issues .but when the subroutine is called it passes address no. in some different format( like XXXXX) rather than actual value.I debugged script and in the particular window the adress no. is displayed as XXXX.i also used CONVERSION_EXIT_ALPHA_INPUT.Any suggestion is highly appreciated.Below is piece of my code
/: DEFINE &GV_NAME& = ' '
/: PERFORM GETADD IN PROGRAM ZRFI_FI110_CHCK_CA
/: USING &GV_ADR&
/:CHANGING &GV_NAME&
/: ENDPERFORM
REPORT ZRFI_FI110_CHCK_CA.
types : gtt_itcsy type standard table of itcsy .
*& Form GETADD
form getadd tables xt_intab type gtt_itcsy
xt_outab type gtt_itcsy.
data: lv_name1 type NAME1,
lv_adrnr type ADRNR,
lwa_input type itcsy,
lwa_output type itcsy,
zadrc type adrc.
read table xt_intab into lwa_input index 1..
lv_adrnr = lwa_input-value. ( here i am getting value of address no. from script as XXXXXXX)
select single * into zadrc from adrc
where addrnumber = lv_adrnr and
date_to >= sy-datum and
nation = space.
lv_name1 = zadrc-name1.
read table xt_outab into lwa_output index 1.
lwa_output-value = lv_name1.
modify xt_outab from lwa_output index 1.
endform.hi amar,
this is my subroutine. i fetch requiredvalues like this and not using address---endaddress.
form get_ADDRESS TABLES in_tab STRUCTURE itcsy
out_tab STRUCTURE itcsy.
DATA : STREET1 LIKE ADRC-STR_SUPPL1,
STREET2 LIKE ADRC-STR_SUPPL2,
STREET3 LIKE ADRC-STR_SUPPL3.
DATA : ZADNR LIKE REGUH-ZADNR.
DATA : LV_ADRNR TYPE AD_ADDRNUM.
DATA : IT_ADRC TYPE ADRC OCCURS 0 WITH HEADER LINE.
*BREAK MTABAP.
READ TABLE IN_TAB INDEX 1.
CONDENSE IN_TAB-VALUE.
MOVE IN_TAB-VALUE TO ZADNR.
MOVE ZADNR TO LV_ADRNR .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = LV_ADRNR
IMPORTING
OUTPUT = LV_ADRNR .
SELECT * FROM ADRC INTO TABLE IT_ADRC
WHERE ADDRNUMBER = LV_ADRNR .
READ TABLE IT_ADRC WITH KEY ADDRNUMBER = LV_ADRNR.
STREET1 = IT_ADRC-STR_SUPPL1.
STREET2 = IT_ADRC-STR_SUPPL2.
STREET3 = IT_ADRC-STR_SUPPL3.
read table OUT_tab index 1.
MOVE STREET1 TO OUT_TAB-VALUE.
CONDENSE OUT_TAB-VALUE.
MODIFY OUT_TAB INDEX 1.
read table OUT_tab index 2.
MOVE STREET2 TO OUT_TAB-VALUE.
CONDENSE OUT_TAB-VALUE.
MODIFY OUT_TAB INDEX 2.
read table OUT_tab index 3.
MOVE STREET3 TO OUT_TAB-VALUE.
CONDENSE OUT_TAB-VALUE.
MODIFY OUT_TAB INDEX 3.
ENDFORM.
in in sapscript , i added,
/: DEFINE &STREET1&.
/: DEFINE &STREET2&.
/: DEFINE &STREET3&.
/: PERFORM GET_ADDRESS IN PROGRAM ZRFFOUS_FORM
/: USING ®UH-ZADNR&.
/: CHANGING &STREET1&.
/: CHANGING &STREET2&.
/: CHANGING &STREET3&.
/: ENDPERFORM.
A6 &SPACE(6)&®UH-ZNME1&
A6 &SPACE(6)&®UH-ZSTRA&
A6 &SPACE(6)&&STREET1&
A6 &SPACE(6)&&STREET2&&SPACE(1)&&STREET3&
A6 &SPACE(6)&®UH-ZORT1&-®UH-ZPSTL&&ADRC-POST_CODE1&
hope this helps u. -
Mass-change address format in address book
Hi Guys,
I've recently changed from pc to mac (yay) and have imported all my contacts into address book.
I have several hundred contacts that have mailing address in the US, and several hundred that have mailing addresses in the Netherlands and some in other parts of the world.
I'd like to change the address formats to the appropriate ones, but so far have only been figure out how to do that one at a time, or all together.
I can use smart groups to group the addresses I want to change together, but after that I'm stuck.
Is there a way to change the address format from selected cards? or will I have to do this one at a time?
Thanks for your help.
mac mini Mac OS X (10.4.8)
mac mini Mac OS X (10.4.8)Here is an Applescript you can run that will do what you want:
property CountryCode : {missing value:"us", USA:"us", Netherlands:"nl", UK:"uk"}
tell application "Address Book"
repeat with aPerson in people
set theAddresses to addresses of aPerson
if theAddresses is not {} then
repeat with anAddress in theAddresses
set theCountry to country of anAddress
set the country code of anAddress to my getCC(theCountry)
end repeat
end if
end repeat
end tell
on getCC(aCountry)
set s to "on run {CountryCode}" & return
set s to s & "get " & aCountry & " of CountryCode" & return
set s to s & "end"
try
run script s with parameters {CountryCode}
on error
return text returned of (display dialog aCountry & " not found. Enter a country code:" default answer "us" buttons {"Ok"})
end try
end getCC
In the property statement, change the "us" for missing value to your default country code. Add any other countries you have to the CountryCode list. The first part, before the colon, is the Name of the country as found in your address book. The second part is the ISO country code (two characters). I found a list of ISO country codes here. That list was upper case, but the address book uses lower. If you have variants of the same country name, you can just add them all to the list.
Note: the name of the country cannot be more than one word--I didn't want to work out another way of getting codes. However, if the script runs across a country name that is not in the list, it will ask you to enter the correct value. You can change the "us" in the getCC handler to the country code of multi-name countries in your address book to make it the default answer.
Need help with Applescript? Just copy the code into a new Script Editor document and hit the Run (green right arrow) button. It will open the Address Book and start looking through your contacts, finding ones with addresses, and setting the country code to what you say it should be in the property CountryCode list.
If it fails with any other errors, check the Event Log History window which may give you a clue as to what was wrong with the address it failed on. You may be able to fix the address so it continues. Otherwise, post back with the error and I may be able to figure it out. -
Problem changing address format
I live in Japan, and therefore have lots of Japanese addresses. When I imported these addresses into Address book, it automatically put them in 'Japan' address format (although I have UK format specified in the preferences). Japan format is more or less the opposite of UK or USA format, with post code and city first, and street address last.
However, Japan format is only used if the address is in Japanese script. Otherwise the addresses are written in UK format. Therefore, I set about changing the formats. However, when I change the format, Address Book automatically puts the words 'United Kingdom' in the country field. I then have to change it to 'Japan'. As I have about a thousand addresses, this is pretty infuriating.
Is there anyway to change this behaviour, so that the country is not automatically inserted?Unfortunately you may have to clear out the country field before changing the format.
-
EMail Address Validation - Shell Script
Hi,
I have a custom concurrent program (Shell Script Program). One of the input parameter is Email address.
In my code, I need to validate email address format (Ex: [email protected])
Can anyone paste the code snippet.
I have tried with the below validation
case $EMAIL_ID in
*@?*.?*) echo "Email Address Validated.";;
*) echo "Invalid Email Address. Please enter the correct format of email address and re-run the program";
exit 1;;
esac
This validation is failing in this scenario xxx,[email protected] / xxx [email protected] (If user enters the email address with comma or a blank space. This validation is returning success message)
Regards
BSPlease look up the syntax for this by typing
man mailx
on the shell command prompt.
Please stop asking Unix specific questions in an Oracle forum. There are more than enough Unix forums on the Internet.
Please refrain from asking further doc questions here.
You are in gross violation of the 'Forums Etiquette' post.
Sybrand Bakker
Senior Oracle DBA -
Hello - I just purchased an iPhone 4s and would like to use iCloud but my apple id is not in email address format so when i try to sign into iCloud it won't let me use my apple id. i tried to change my apple id through my account settings but could not find a way to do that. i found ways to change everything else in my settings but when i pushed on the edit button to change my apple id the page didn't change. Not sure how i can get to use iCloud? Please help.
You change the name of your ID at https://appleid.apple.com. See http://support.apple.com/kb/HE40.
-
How to make Address Book obey Preferences?
I run MacBook Pro 4.1 laptop, Mac OS X 10.6.8
Address Book 5.0.3 (883)
Preferences set at ...
General
First name following Last name
Sort for Last name
Address Format Canada
Font size Large
Phone format set at
+1.123.456.7890
When application quits - it's all forgotten and it self-resets to
unwanted configuration.Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software. -
How to setup the From header in fullname and email address format
when I sent mail from the messaging express , the mail that I sent cannot show the sender in the fullname and email address format. I use webmail and other mail client . It show only email address. I don't know how to setup this . I use the SUN JES messaging server 6.0 SP1 .
exactly so.
in general, for any configutil setting:
0=off=no
1=yes=on -
Standard US Address format in Smart forms
Hi All,
Can any one please tell me how can we achieve standard US Address format while displaying Address.
Thanking you in advance.
Ragards,
Bhanu.RCommand ADDRESS - ENDADDRESS formats an address according to the postal standards of the destination country defined in parameter COUNTRY. the reference fields are described in structure ADRC
Syntax
/: ADDRESS
write ur address between this commands
/: ENDADRRESS -
Use of "Next paragraph same page" check box in paragraph format of SCRIPT?
Hi Guys,
What is the use of "Next paragraph same page" check box in paragraph format of SCRIPT?
Don't Send me the F1 help ....i am not clear with that help it is quite confusing.
Provide example if possible.
Solutions will be rewarded.
Regards,
GURUHello.
You probably know the idea of PROTECT command. It makes that a paragraph wont break in two. If it fit's totaly in one page it will print in that page. If not, it will print totaly in the second page (won't break at the middle).
The checkbox you are asking, makes the same with two paragraphs. This means that if you have paragraphs A and B (A becomes first) and if paragraph A has that option, the next paragraph won't break, and appear in the second page. If paragraph A is in first page, paragraph B will print in first page too, or they will both print in second page.
Try it.
Best regards.
Valter Oliveira. -
Can I set the address format for individual contacts?
I have some foreign friends and would like to set the address format for their individual cards correctly. I can't seem to find a way to do this. I will be taken aback if this can't be done - I think the old Claris contact product did that.
Anyone with any answer?
BryanHi Bryan,
When in edit mode, can you right click on the address field and change the country format there? I'm not on a Mac at the moment to double check, but that's what you do in OS 10.4 so I'd be surprised if it were changed in 10.5.
Edit: Here's picture to demonstrate what I'm referring to:
!http://www.ampersandbox.com/imprint/change-address-format.jpg! -
Preventing empty rows in address formats
Hallo everyone!
I'd like to know if there is a method to prevent SBO2005A from printing empty rows in the address fields when for instance there is missing county in BP addresses like this:
I have defined an address format that goes
Block
County
Street
ZipCode | Freetext(" ") | City
We use Block as "Name2" and County as "Name3" in master data just in case the customer wants to use additional names for his BPs.
If I use the "Block" - field and I leave the "County" - field blank it prints an empty row between "Block" and "Street". This is not the behaviour I would like to see. In case "county" is missing I would rather see something like this in a printout:
Block
Street
ZipCode | Freetext(" ") | City
So, is there a method to force this? or any workaround?Hello Patryk,
PLD does not offer the functionality to control the blank lines in an address field. I would suggest you use a formatted search in your address field on the marketing document and have it formatted in the document itself before you print.
Please see sample code for your requirment for the Ship to address. If you want this to applied to the Bill to address field then you have to slight alter the query by cha
For Shipto address formatting
SELECT CASE WHEN T0.Block IS NOT NULL THEN + CHAR(13) + CHAR(10) + T0.Block + CHAR(13) + CHAR(10) ELSE '' END +
CASE WHEN T0.County IS NOT NULL THEN + CHAR(13) + CHAR(10) + T0.County + CHAR(13) + CHAR(10) ELSE '' END +
ISNULL(T0.Street, '') + CHAR(13) + CHAR(10) + ISNULL(T0.ZipCode, '') + ' ' + ISNULL(T0.City, '')
FROM [dbo].[CRD1] T0 WHERE T0.AdresType = 'S' AND T0.Address = $[$40.0.0] AND T0.CardCode = $[$4.0.0]
For Billto address formatting
SELECT CASE WHEN T0.Block IS NOT NULL THEN + CHAR(13) + CHAR(10) + T0.Block + CHAR(13) + CHAR(10) ELSE '' END +
CASE WHEN T0.County IS NOT NULL THEN + CHAR(13) + CHAR(10) + T0.County + CHAR(13) + CHAR(10) ELSE '' END +
ISNULL(T0.Street, '') + CHAR(13) + CHAR(10) + ISNULL(T0.ZipCode, '') + ' ' + ISNULL(T0.City, '')
FROM [dbo].[CRD1] T0 WHERE T0.AdresType = 'B' AND T0.Address = $[$226.0.0] AND T0.CardCode = $[$4.0.0]
Suda
Maybe you are looking for
-
JavaBeans and Tags in JSP pages
I have a java package and some code that already works but I need to "Webify" it. I have heard the words Tag Libraries and Beans to use with JSP pages instead of writing out the java code in the page. I have read the tutorial on Tag Libraries and it
-
I'm using the "Page n of m" custom library object on one of my forms. After saving the form in Designer, I open it up in Acrobat 7.0 Pro or Reader 7.0. The page numbers are displayed as expected. After inputting information in and on exit from any fi
-
So today, for the first time in as long as I've owned my 2.0 GHz iMac G5, it just randomly shut down on me. I thought it was a one time thing, a power surge or something maybe, so I started it back up and went about my business. Then a few hours late
-
Is it possible to update a Folio without having the Update Tag appearing in the app? If there is a minor change that isn't worth to bother customers for example.
-
HT4759 where do i find my photos :(
i can't locate my photos....where do i find them