Which encoder setting do i use to NOT encode any imported tracks?

I'd like to re-import my entire library, but i am worried that the encoder setting in preferences will re-encode everything to one file type, such as mp3 or aiff. How do i tell itunes to leave all of my file types alone?

The encoder settings only apply to audio CDs which you import - the assumption is that you don't want to take up disk space with the large files of a CD, but you can set it to AIFF (it looks as if audio CDs contain AIFF files when you open them but this is an illusion: the format is specific to CDs* so they still have to be converted if you want uncompressed AIFFs).
Any prexisting files which you drop into iTunes remain in the format they were in in the first place.
If you are re-importing your audio CDs I should do so as AIFF so that they are uncompressed: you can then change the import settings to MP3 or AAc or whatever, and then select the files and choose 'Create MP3 (or AAC) version' to make a copy in your desired format., and subsequently delete the originals.
(*Solomon-Reed cross-interleave if you really want to know - the data is jumbled up and has strong error correction so that it can survive scratches and other minor surface damage: the same is not true of data CDs containing for example MP3 files, where one scratch can bork the entire file.)

Similar Messages

I am trying to redeem my itune prepaid card and the system request the security question's answer which i have forgot. im trying to retrieve it through my yahoo email address which i set earlier but i do not receive any email from apple support.

i am trying to redeem my itune prepaid card and the system request the security question's answer which i have forgot. im trying to retrieve it through my yahoo email address which i set earlier but i do not receive any email from apple support. Can i know what should i do to retrieve my security question's answer?

http://support.apple.com/kb/HT5312
-If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com. Clicking the link will send the reset to your rescue email address (NOTE: This is not the same address as your Apple ID email)
-If there is no link on the page, then you didn't establish a rescue email address. Contact AppleCare at 800.694.7466 (If you are in the US), and ask for account security. You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
-If you are not in the US, click http://support.apple.com/kb/HT5699 - Apple ID: Contacting Apple for help with Apple ID account security
HTH

HT4839 Which apn setting should I use for my iphone 4 on net10

Which apn setting should I use for iphone 4 on net10

APN Settings for Net 10
Cellular Data
APN: att.mvno
Username: (Blank)
Password:(Blank)
MMS (Blank)
APN: att.mvno
Username: (Blank)
Password: (Blank)
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Max Size: 1048576
MMS UA Prof URL: www.apple.com/mms/uaprof.rdf
Type exactly whats on here on your settings.
Procedure:
1- Turn on your phone
2- Get paperclip take out tray and put your non working sim card in- T-moble and simple mobile sim cards work great for me on this venture.
3. Goto Settings>General>Cellular>Cellular Network
At this point its very critical that you do this fast, Once you change the sim card to your net 10 the option Cellular Network will only stay on for a few seconds while it's searching for service. You will need to click on cellular once the Net10 sim card is in and click on Cellular network again.
4. Get your paperclip take out the tray put in the Net 10 sim card
5. Goto Cellular>Cellular Network while it's searching for service
6. Type in your settings that I list above
7. Scroll back to your main setting (Do not press your Home Button)
8. Once you see your service up and running try out your web and send a picture message it should work.
9. If it does'nt work you mistype one of the settings, it has to be exact or it wont work.
10. Do the process all over again
Keep this information and the sim card away for a later date in case you lose your setting I have'nt turned off my phone or let my battery die to find out if I lose my settings. One thing for sure I lost it when I update to the IOS 6.0.1.

Not able to import track configuration

Hi,
I'm trying to import track configuration into NWDS. I successfully created track and required sca files also imported. I do have all required privileges.
I'm using NW 2004s SP 12 and not a sneak preview edition.
Following is the error:
Caused by: com.tssap.dtr.client.lib.vfs.config.ConfigurationException: Could not create remote path /dtr/ws/TRAIN/TRAINING_SOFT_COMP/dev/inactive/SCs/TRAINING_SOFT_COMP/_comp/TopLevelDCs/ (Communication error [cause: Read timed out]).
at com.tssap.dtr.client.lib.vfs.config.impl.RepositoryServer.assureRemotePathExists(RepositoryServer.java:230)
at com.sap.tc.devconf.impl.DevelopmentConfiguration.findOrCreateMountPointForSC(DevelopmentConfiguration.java:2748)
Thanks,
Shiva

Hi,
You will have to enter SLD server and NWDI server if they are located on different server.
If they are on the same server. Try following thing.
1. Close NWDS
2. Go to C:\Documents and Settings\<UserId> and delete .dtr and .dtc folders created.
3. Open NWDS and try importing now.
OR.
Go to DTR perspective.
Choose DTR-> Create Client from the menu option.
Enter details of the client and save.
Try importing.
Ashu

Which security setting should I use?

I just installed a WRT300N and I am trying to set the Wireless Security. This is a home network with 2 desktops wired 1 desktop wireless and 2 wireless laptops.
So many choices and I'm lost.
WEP
PSK Personal
PSK2 Personal
PSK Enterprise
PSK2 Enterprise
RADIUS
Which is the strongest and the best to use??
Also should I enable SSID Broadcast and what does this do?
Sould I use the Wireless MAC Filter for just the internal machines.
Any other suggestions to secure and get as much speed as possible?
Thanks in advance for any help

Those Encryption are provided by the router.. all you have to do is check on the capability of you wireless adapters.... You should checked the compatible encryption for your network cards... for example:
most wireless - b cards are only working on WEP.....
Wireless - G cards are compatible with WEP and WPA personal...
Its only matter of checking on the capability of your cards.....
You could also contact the Manufacturer of those wireless adapters

Why exportButton which is set in the pageButtonBar is not working.

There is a QueryRN. it maps a VO.
There is a ExportButton in the pageButtonBar and it maps the same VO.
At the same time, simpleSearch and advanceSearch are added to the QueryRN.
the problem is that when i come to the advanceSearchPG, if the only one item of search exists, the ExportButton is working. But if the more items of search exist, when i click the ExportButton, there is a error appearing in the page.
the error content is like below:
This region <RegionCode=> <RegionApplicationId=> has an invalid root bean <SPACER_ROW>. This can be caused in one of the following two ways:
1) An attempt has been made to reference an application module or view object which is not yet known. Be sure to add this bean to its parent before setting or getting any attributes which is associated to an application module or view object.
2) All regions must have an OABodyBean as it's root bean.
Message was edited by:
Sumury

This is a developer mode error. Can you check this by removing the developer mode from Project Setting > Run Options and run the page.

Setting up Printers using PCL not Postscript

Up until recently we have been using JetAdmin (old package) that works great....
Looking at solaris 10 we are looking at the native printer drivers to see if we can create the types of printer queues we need.
It appears that Cups deals well with Postscript, but I don't see how it support PCL type printers.
Any documentation on this that we can follow to set up a number of printer queues.

Thanks Ted, that worked.
Apple has got a great easy to read file on this site titled "How to Setup 300 Printers in Just Under 3 Minutes". Maybe they should update the document to include copying the 2 pref files.
Thanks again.

Why does text on certain portions of websites, usually when adjacent text contains special characters, become jumbled into seemingly random sets of characters that are not in any way jumbled when viewing the source of the webpage? How can I fix this?

When viewing most text on most websites, it displays properly. However, there are two instances where text will either tend to, or consistently, become jumbled into a mess of seemingly random characters. Oddly enough, these seemingly random characters are not, in fact, random. The same weird character will be used to replace the same regular English text character consistently across the entire area that has been jumbled.
The two instances where this tends to occur most often, or consistently in some cases, are, first, when a paragraph or particular section of formatted text contains special characters, such as Chinese or Japanese characters, or accented letters. When this happens, usually the paragraph that contains the special characters is completely jumbled, while the rest of the text on the page will have intermittent jumbling on a word or two. Most often, the word "the" is jumbled in this case.
The second instance where this happens is when a website uses specially formatted text in some form or another. I, not being an expert at web development, am not sure what kind of formatting causes it, but I can provide consistent examples in lieu of my experience:
- Example 1:
[http://img408.imageshack.us/img408/9564/firefoxcharencodingissu.jpg]
Example 1 shows a portion of a screen-shot of the website "Joystiq.com". Every single article title on the front page of this blog is consistently jumbled, while the text of the article itself remains untouched. Please note that when this jumbled text is highlighted, it is visible un-jumbled in the right-click menu as well as in the source code of the page. Other consistent instances can be found within many search fields on various websites. For instance, the search bar located at the top right of "Kotaku.com" consistently displays jumbled characters both on its default text of "Search" and on any text that is typed into the search box itself.
- Example 2:
[http://img822.imageshack.us/img822/9564/firefoxcharencodingissu.jpg]
Example 2 shows both the jumbling of the paragraph containing the character "☆" as well as the subsequent peppering of the rest of the article's text with small jumbled words. Below this is the DOM Source of the selected text which shows how the text itself is being rendered properly within the site's source. Additionally, for convenience, I have edited on to the bottom of the image a small snippet of what the search bar on the same page looks like. Notice how the grayed-out text that normally would read "Search" is instead jumbled.
This issue has been plaguing my browser for the past year or so, and I had hoped that it would go away with subsequent Firefox updates. It has not gone away.
Thank you for reading! Please help!

This issue can be caused by an old bitmap version of the Helvetica or Geneva font or (bitmap) fonts that Firefox can't display in that size.
Firefox can't display some old bitmap fonts in a larger size and displays gibberish instead.
You can test that by zooming out (View > Zoom > Zoom Out, Ctrl -) to make the text smaller.
Uninstall (remove) all variants of that not working font to make Firefox use another font or see if you can find a True type version that doesn't show the problem.
There have also been fonts with a Chinese name reported that identify themselves as Helvetica, so check that as well.
Use this test to see if the Helvetica font is causing it (Copy & Paste the code in the location bar and press Enter):
<pre><nowiki>data:text/html,
Helvetica abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ 
Helvetica Neue abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
</nowiki></pre>
You should reset the network.http prefs that show user set on the about:config page. 
Not all websites support http pipelining and if they do not then you can have issues with images or other problems.
See also http://kb.mozillazine.org/Images_or_animations_do_not_load#First_steps

Is there a way to set up IMAP with Gmail & not have it import 3,000 emails?

I just set up my Iphone with the mail setting. I set up my Gmail with IMAP cause I heard that was new and better than POP. The problem I am having is that now that it is set up I have close to 3,000 emails in my inbox. Is there a way to have it import emails that arrive from a certain point on? or to delete all of those old emails at once? I am getting extremely frustrated with all of this email business. It seems so easy but no matter how I set it up it always seems to never work out. Any help would be appreciated. Thanks in advance.

It is only better if you access the account with an email client on your computer as an IMAP account as well as being accessed as an IMAP account with the iPhone's email client which provides for keeping all server stored mailboxes synchronized automatically between both email clients used. In addition, you can store sent messages on the server with both email clients and when sending a message with the iPhone's email client, it will be available in the account's Sent mailbox when accessing the account with the email client on your computer and vice-versa which is not possible with a POP account.
I believe there is a setting via webmail access for your account for this.
If not and you are also accessing this account with an email client on your computer as an IMAP account, you can delete the messages from the account's Inbox there and when checking the account's Inbox mailbox with the iPhone's email client, it will be synchronized with the server automatically removing all messages automatically that were deleted with your computer's email client but these messages will no longer be available to you with either email client.
With your computer's email client for any messages that you want to save but you no longer want them available on the server, you can create an additional mailbox stored locally on your hard drive. Transferring messages from a server stored mailbox with an IMAP account to a mailbox stored locally on your hard drive stores the transferred messages on your hard drive and removes them from the server at the same time. Or you can create an additional server stored mailbox or mailboxes with the email client used on your computer or via webmail access for the account and transfer messages from the account's Inbox mailbox to the designated server stored mailbox that was created. This way the additional server stored mailbox and the messages within will be available when accessing the account with your iPhone automatically in case you need to access any of these messages when using your iPhone and you can transfer messages from the account's Inbox mailbox or Sent mailbox on your iPhone to the server stored mailbox created which will also be kept synchronized with the server when accessing the account with the email client used on your computer.

How to find out if a client is in use or not in any ABAP instance?

Hi,
I would like find out if a particular client like 100 or 800 or 200 etc is being used by some one or not in an ABAP system, if the client is not in use for a long time then we are planning to remove the client from Sandbox. Is there any TCODE which gives this information, can you please let me know?
Thanks.
Jennifer

Hey Jennifer,
try AL08 then. It provides a list of users/clients listed per server of the landscape, this gives you an excellent overview.
SM04 will show you users logged on that particular client and its respectives t-codes (you will need to log on each client to view this data)
Best regards,
Tomas Black

Firefox has only one theme/persona enabled which is actually removed. It does not accept any other theme/persona

Much time ago, when I was using firefox 3.5/4 (I do not remember exactly), I installed a Theme/Persona of Green Flower (I do not remember the exact name). I liked that theme so I kept it for a long time. But after some days when I wanted to change it, it did not change. The problem is still continuing. I am currently using Firefox 9.0. I have no such Add-on or Extension installed which could prevent Firefox from changing the Theme/Persona.
I have described below what happens exactly:
.I browse over Personas
.I select one or two and install them
.Finally I Enable one for use
.It gets enabled and the Persona is activated
.It is enabled till current session is on
.But on the next startup of Firefox, its gone!
.It doesnt show up!
.All I am left with, is this Green Flower Theme/Persona!
.Please help me to change it, I am fed up seeing this White and Green Firefox
.Even updating Firefox doesnt help!
.What shall I do?

See:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.com/kb/Preferences+are+not+saved

I got this macbook pro last December 25, upon setting it up I did not put any password. Now I want to install an app, it is asking me for a password. How can I give one if I did not set it up? I tried putting my apple ID password but it wont work.

please. waiting for your replies.

You should have set up a password. It is important to have one in order to prevent other users from installing applications and to make your Mac safer.
If you have set up your Apple ID, you can try resetting your user password with your Apple ID > http://support.apple.com/kb/HT1274
If it does not work, reset your user password through Recovery > http://discussions.apple.com/docs/DOC-4101 Then, set up a different Keychain password > http://support.apple.com/kb/ht1631

When using usb not able to hear track

I'm not able to hear my track while recording, when using a usb input (either through speakers or headphones) until I stop using the usb port. When I unplug it allows me to use 'Built-In-Audio' and then I can hear the track. Monitor choice doesn't affect anything while usb port is in use.
Thanks.

http://www.bulletsandbones.com/GB/GBFAQ.html#usecomputersspeakers
(Let the page FULLY load. The link to your answer is at the top of your screen)

I am unable to send or receive mail when set up to use my apple id any thoughts

Mail has auto sorted all the server info from my apple ID that I put into the mail setup front sheet. Once set up it doesnt receive test mails I send to it, If iI send out I just get a notification devevery falure. Any Ideas?

You can try resetting your iPhone. Make sure to make a backup of your data.

Which scenario we have to use TQTA schema, can any one explain me with one scenario?

plz help me.
Thanks in Advance.

Hi Anand,
Any negative scenario you can generate through TQTA.
Every month employee will be getting 2 quota and will be run for the next 6months quota creation.
But suggession is that we are using TM04 because it has more flexibility to complete some complex scenario in Negative time management.
Regards,
Sankarsan

Which encoder setting do i use to NOT encode any imported tracks?

Similar Messages

Maybe you are looking for