Which field we would put join in kna1 and likp table.

Hi,
which field we would put join in kna1 and likp table.
With thanks Regards.

> which field we would put join in kna1 and likp table.
>
JoiN:
table KNA1-KUNNR WITH LIKP-KNKLI
Rwd points if reoslved
regards

Similar Messages

Can any one tell me on which fields shell i put join . specially in likp

Hi,
I have to create dispatch intimation report. tables i m using r vbrk,vbrp,likp,liks,vbpa,kna1(for customer name ref to likp),lfa1(for transporter name, makt (for material description.).
Can any one tell me on which fields shell i put join . specially in likp , vbrp and lips.
i am not getting desired output.i m joining vbrp and likp by vbeln and vbelv.
Regarda,
ranu

Hello,
In the Billing document at Item level there is a reference field which contains the Delivery document number . VBRP-VGPOS
Or else,
You can also get the delivery number from the VBFA which is the document flow, From the VBRK get the VBELN number and enter the value in the VBFA and give the document category as J which lists the Delivery document
Pick the Delivery number and goto LIPS and get the value which you require.
thanks,
santosh

I had pictures and videos on my I phone 4 s which I wanted to put onto my laptop, and I dunno what I pressed on I tunes it totally wiped out all my stuff. How can I get them back??? Help???

I had pictures and videos on my I phone 4s which I tried to put onto my laptop and I don't know what I pressed on I tunes it just completely wiped out all my data, how can I get all that back I've been told e everything is still in the phones hardware does anyone know how I can get it back??? Need help please???

Do you see them on the phone? If not, they are NOT "still in the phones hardware".
It's hard to suggest a course of action when we don't know what you did and you are unable to tell us.
If they are not on your computer, and they are not on the phone, I don't know what else to suggest...
Were you using iCloud? Did you have photo stream enabled? If you did, they would have been uploaded to iCloud. If you did not, then they are gone.

Craeting data fiel for data from KNA1 and ADRC table...

Hi,
I want to create a data file (tab delimited) which will have data from two tables, KNA1 and ADRC. The customer number, Name1 and Name2 fields data will come from KNA1 but the Street field data will
come from ADRC table. The ADRNR number will be a linkage between two tables KNA1 and ADRC.
I don't want to write a reprot for this. Can someone tell me if I can use SQVI for this and then go to options download in excel sheet directly from the menu.
Is there any other smarter way to do it ?
Regards,
Tushar.

Use an inner join between KNA1 and ADRC...The use <b>GUI_DOWNLOAD</b> FM to download the file...
Greetings,
Blag.

BAPI to update data in KNA1 and ADR* tables

Hi,
I have to change customer data via BAPI.
I'm searching for a BAPI that updates KNA1 and ADR* tables.
(so that data will be coherent).
I found BAPI_CUSTOMER_CHANGEFROMDATA1 but it seems to only update KNA1
and BAPI_ADDRESSORG_CHANGE that only updates ADR* tables.
Can you help me ?
Thanks,
Sandrine.

I came accross such a requirement but couldn't find a single function module.
I think try using both the FM's else BDC is the only option left.
you can use the FM "DEBITOR_BDCDATA" to get the BDC data for vendor and then edit it to add the address fields required.

Link b/w kna1 and likp

hai,
how can i get the shipto party no by linking kna1 and likp.
with thanks
aru

Hi
link this
<b>
LIKP-KUNAG = KNA1-KUNNR</b>
and fetch related data
Reward points for useful Answers
Regards
Anji

Joining of cluster and pooled tables ,transparent tables

Hi,
I wanted to do join between cluster ,pooled and transparent tables but inner join won't allow to join between transparent or cluster tables or pooled tables . The requirements are that join should take place dynamically between transparent ,cluster ,pooled tables .I have written the Function module for joining multiple tables for transparent tables but unable to implement same for the transparent and cluster or pooled tables.How to handle the joining of tables between pooled or cluster and transparent tables kindly provide me the answer .
Thanks,
jahnavi.

Hi Jahnavi,
My suggestion would be... if you want to retrieve the data between cluster tables and transparent tables.. its better to go for views instead of cluster tables then that would be easier for you to retrieve the data
let us take one example BSEG its a cluster table where as there is one view VBSEGK it contains almost all the important fields needed so that u can make use of those or you can look into BSIK and BSAK tables so it better to avoid the cluster tables while retriving the data from the performance point of view

Best Practice - Outer Join between Fact and Dim table

Hi Gurus,
Need some advice on the below scenario
I have an OOTB subject area and we have around 50-60 reports based on it. The related subject area Fact and Dim1 table are having inner join.
Now I have a scenario for one report where outer join has to be implemented between Fact and Dim1. Here I am against changing the OOTB subject area join as the outer join will impact the performance of other 50-60 reports.
Can anyone provide any inputs on what is the best way to handle this scenario?
Thanks

Ok. I tried this:
Driving table : Fact, Left outer join -- didnt work.
Driving table: Dimension D left outer join -- didnt work either
In either the case, I see physical query as D left outer Join on Fact F. and omitting the rows.
And then I tried this -
Driving table: Fact, RIght outer join.
Now, this is giving me error:
Sybase][ODBC Driver]Internal Error. [nQSError: 16001] ODBC error state: 00000 code: 30128 message: [Sybase][ODBC Driver]Data overflow. Increase specified column size or buffer size. [nQSError: 16011] ODBC error occurred while executing SQLExtendedFetch to retrieve the results of a SQL statement. (HY000)
I checked all columns, everything matched with database table type and size.
I am pulling Fact.account number, Dimension.account name, Fact.Measures. I am seeing this error each time I pull Fact.Account number.

Left outer join on Fact and dimension table.

Hi all, I have a fact F with account number and few measures as columns.
I also have a dimension D with account number, account name columns.
Few account numbers from Fact doesnt exist in Dimension D , but they need to show up in the report though.
How do I left join Fact and Dimension D in RPD?
I have this report where I need to show Account Number, Account name, measures.
If D doesnt have certain account numbers, I need to convert that account number from F as string and show it in the report in account name column.
Can you pls help.

Ok. I tried this:
Driving table : Fact, Left outer join -- didnt work.
Driving table: Dimension D left outer join -- didnt work either
In either the case, I see physical query as D left outer Join on Fact F. and omitting the rows.
And then I tried this -
Driving table: Fact, RIght outer join.
Now, this is giving me error:
Sybase][ODBC Driver]Internal Error. [nQSError: 16001] ODBC error state: 00000 code: 30128 message: [Sybase][ODBC Driver]Data overflow. Increase specified column size or buffer size. [nQSError: 16011] ODBC error occurred while executing SQLExtendedFetch to retrieve the results of a SQL statement. (HY000)
I checked all columns, everything matched with database table type and size.
I am pulling Fact.account number, Dimension.account name, Fact.Measures. I am seeing this error each time I pull Fact.Account number.

Can we join the transparent and pooled tables?

hi friends,
i have a doubt that is when we want to get the data from transparent and pooled tables it is not possible to join the tables.
so should we go with nested select statements or is there any way to get the data? with better performance
if i go with nested select statements it takes a lot time thats y i need a better way
for example i want the data from BKPF and BSEG based on BELNR
please send me how can we get it
regards
jagadish

hi rob
thanks for response
see the below code once
SELECT * FROM bkpf
          WHERE gjahr = p_gjahr
          AND ( monat BETWEEN lv_1st_mth AND gw_prev_monat ).
*- Selection with cost center
      IF gw_kostl NE SPACE.
             s_kostl = s_kostl+3(10).
             SELECT * FROM bseg
                  WHERE bukrs = bkpf-bukrs
                  AND   belnr = bkpf-belnr
                  AND   gjahr = bkpf-gjahr
                  AND   kokrs = p_kokrs
                  AND   kostl IN s_kostl
                  AND   buzei = '001'
                  AND   lstar <> ' '.
             MOVE bseg-lstar TO itab2-lstar .
             MOVE bkpf-bukrs TO itab2-bukrs.
             MOVE bkpf-belnr TO itab2-belnr.
             MOVE bkpf-gjahr TO itab2-gjahr.
             MOVE bkpf-monat TO itab2-monat.
             MOVE bkpf-budat TO itab2-budat.
             MOVE bseg-kokrs TO itab2-kokrs.
             MOVE bseg-buzei TO itab2-buzei.
            MOVE bseg-wrbtr TO itab2-wrbtr.
*Changed----
             IF bseg-shkzg = 'H'.
               lv_wrbtrcd = 0 - bseg-wrbtr.
               itab2-wrbtr = lv_wrbtrcd.
             ELSEIF bseg-shkzg = 'S'.
               MOVE bseg-wrbtr TO itab2-wrbtr.
             ENDIF.
             MOVE bseg-fdwbt TO itab2-fdwbt.
             MOVE bseg-sgtxt TO itab2-sgtxt.
             MOVE bseg-kostl TO itab2-kostl.
             APPEND itab2.
             ENDSELECT.
      ELSE.
             s_kostl = p_estat+0(4).
             SELECT * FROM bseg
                  WHERE bukrs = bkpf-bukrs
                  AND   belnr = bkpf-belnr
                  AND   gjahr = bkpf-gjahr
                  AND   kokrs = p_kokrs
                  AND   kostl IN s_kostl
                  AND   buzei = '001'
                  AND   lstar <> ' '.
             IF bseg-kostl+0(4) = s_kostl.
                 MOVE bseg-lstar TO itab2-lstar.
                 MOVE bkpf-bukrs TO itab2-bukrs.
                 MOVE bkpf-belnr TO itab2-belnr.
                 MOVE bkpf-gjahr TO itab2-gjahr.
                 MOVE bkpf-monat TO itab2-monat.
                 MOVE bkpf-budat TO itab2-budat.
                 MOVE bseg-kokrs TO itab2-kokrs.
                 MOVE bseg-buzei TO itab2-buzei.
                MOVE bseg-wrbtr TO itab2-wrbtr.
*Changed----
             IF bseg-shkzg = 'H'.
               lv_wrbtrcd = 0 - bseg-wrbtr.
               itab2-wrbtr = lv_wrbtrcd.
             ELSEIF bseg-shkzg = 'S'.
               MOVE bseg-wrbtr TO itab2-wrbtr.
             ENDIF.
                 MOVE bseg-fdwbt TO itab2-fdwbt.
                 MOVE bseg-sgtxt TO itab2-sgtxt.
                 MOVE bseg-kostl TO itab2-kostl.
                 APPEND itab2.
             ENDIF.
             ENDSELECT.
      ENDIF.
      ENDSELECT.
regards
jagadish

Join between SO and AR tables in Oracle Apps 11.0.3

Hello,
I am new to Order Management. Can anyone please suggest join between SO Tables and Receivables tables in Oracle Apps version 11.0.3.
I am working on an Invoicing error during Autoinvoice Import Program and I am doing workaround on this issue. This error comes for specific SO only. The error causes all invoices for a org not be imported into AR. To find out a solution for the same we run Autoinvoice into batches by Sales Order using a process of elimination to determine the offending So transaction. From these offending SO then we determine the customer for these SO's. And then find out if there are any other accounts that have relationships with the offending customer and then turn off that relationship. Then rerun Autoinvoice for that SO. Most of the time SO will be imported successfully. Can anyone please suggest what must be the issue in Autoinvoice Program as I am new this.
Thank You.
Regards,
Meghana

Hi again;
I found this please also check this:
Price List Migration from 11.0.3 to 11.5.10/R12.
Regard
Helios

Join between hz_cust_site_uses_all and pa_agreements_all table

What is the joining condition between hz_cust_site_uses_all and pa_agreements_all table? How hz_cust_site_uses_all and pa_agreements_all table can be joined?

Hi,
What happens if you simply use a DISTINCT clause, something like:
SELECT DISTINCT pa.customer_id ,hcs.cust_acct_site_id
           FROM hz_cust_acct_sites_all hca,
          hz_cust_site_uses_all hcs,pa_agreements_all pa
          WHERE hcs.cust_acct_site_id = hca.cust_acct_site_id
        AND hca.cust_account_id       = pa.customer_id
Thanks &
Best Regards,

Which field do you put the 'network key' in?

Does anyone know where you put the 'network key' I.D. in the utility client program?

Welcome to the Apple Community.
It sets itself automatically.
Assuming this is not the first time you have used your Apple TV
    1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    2.    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
    3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    4.    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

HT1766 my ipad has disabled after asking for a passcode which has never been put on this ipad and now disabled itself ???

my ipad has disabled itself after asking for a passcode after updating ios7 now tried to restore it but didnt work

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I am suffering from an ipad hardware issue which I belive would be fixed by Apple and that my device would be changed. I would like to ask whether I would also be allowed to have the 4g version by paying the difference since mine is wi-fi only?

Hi, I think I asked my question in the head-line. I am kinda new here.
Thank you.

A warranty replacement or out-of-warranty replacement will be of the same model, same colour, same capacity.

Which field we would put join in kna1 and likp table.

Similar Messages

Maybe you are looking for