Which file does possess the class Swing??

When I try to compile a program a mistake it is generated in the line:
import javax.swing. *;
I possess jdk1.4. Which the file that possesses the class swing to add in the classpath??

I guess, that is not the problem.
Is there a space between javax.swing. and the * ? - there must be none
greetings Marsian

Similar Messages

Exception occurred which is assigned to the class 'CX_SY_OPEN_SQL_DB',

hi experts
can u help me for this regording shortdump issue
". The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', wa
neither caught nor passed along using a RAISING clause, in the procedure
"UPLOAD_TABLES " "(Form)"
.Since the caller of the procedure could not have expected this exceptio
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.""

Hi
Refer this link
http://www.sapnet.ru/abap_docu/ABENSTRINGS_IN_OPEN_SQL.htm
Regards
Shiva

HT1338 I wanted to import files but the computer says that there is not enough free space. how can i see which files take up the space?

I wanted to import files but the computer says that there is not enough free space. how can i see which files take up the space?

Here's freeing up disk space.
DALE

Output in word file: Methods or the class name required

Hi Gurus,
I am trying to get output of the program in a word document directly without any Script or Report in between.
Steps i follow are:
Fetching the data
Invoking word
Writing the data into the word file created using methods like 'tablegridlines', 'insert' etc.
When i get this data in the word file , in between every two lines i get one empty (extra) line.
What can i do to remove that extra line in between. Everything has to be done in my own program using methods.
Is there any method to delete the line comming between two lines i have created.
Is there any method to convert the layout of the word file created to "Landscape".
I would appreciate if somebody could tell me the class which has the methods like 'tablegridlines'
'insert' 'viewheaderfooter' etc which are used for word output in this case.
The object that i have created is of the type ole2_object.
Helpful answers would certainly be rewarded.
Thanks
Suruchi
Edited by: Suruchi Mahajan on May 14, 2008 6:04 AM

Hi All,
For the possible methods ,search in table OLELOAD.
Regards
Suruchi

Which files actually hold the info & settings for a single Mail Account?

One of my mail accounts must have gotten corrupted yesterday. Since then I can no longer retrieve mail for this account. This account can still send mail normally. All the other mail accounts on this machine function properly and I can retrieve emails from this account on another Mac.
I could probably solve the problem by deleting the account and recreating it. However when I had this problem once before and deleted/recreated the account it was a long process to try to import all the old emails (which I want to keep) from my Time Machine backup. At that time I still lost emails because the import kept hanging up at the same point in the process, so I would like to avoid having to go through that again.
I'm hoping that if I could identify the files that hold all the account specific info I could restore just those files with Time Machine. I'm guessing that if I were to quit Mail, restore those files and then relaunch Mail, everything should be back to the way it was before the files were corrupted.
Does anyone know if my theory is valid? And, if so, do you know which files I need to replace and where to find them?
-- Thanks, in advance, for your help!

Thanks for the response!
Well, I looked in the location you mentioned (Users/yourname/Library/Mail/nameof_yourpop account) before posting my question, but if you look in that POP folder the only things there are the .mbox files for that account: Deleted Messages.mbox, Drafts.mbox, INBOX.mbox, Junk.mbox & Sent Messages.mbox. Inside each of those are the actual emails for those folders, which would restore all the emails (which I haven't lost), but there doesn't seem to be any files that carry the info/settings for the account.
I was hoping to find the settings files which must be located somewhere else. Do you have any other suggestions?

In which files does smtp servers details are mentioned in 11.5.10.2

Hi,
Can anyone please confirm in which files smtp entries will be stored so that i can manually change.
Initially i thought to change SMTP entries in xml file and run the autoconfig. But it was not recommened in this project.
I have been instructed that autoconfig should not be run as there are two many customisations involved.
Now, I need to change the server name manually in all files where SMTP server details exist.
Can anyone shed some light how can i find those files,how can i change the smtp server name.
Regards,
Srini

Hi;
Please see below which could be helpful for your issue
What Mail Server Types Can Be Used To Configure The Workflow Java Mailer In R11i and R12.+ [ID 943578.1]
How To Configure an SMTP Server on Red Hat Linux for the Java-based Workflow Notifica [ID 252116.1]
Autoconfig Overwriting The SMTP Server Name For The Java Mailer [ID 313954.1]
Regard
Helios

Which file(s) stores the edits in a session?

I just opened FCPX this morning and found the multicam edits I had done a couple of days ago had gone from the timeline. It seemed to have reverted back a week or so. The backup copy also seemed to be at that state. Annoying to say the least, but having done them again I was wondering which file in the FCPX file structure actually records and save the edits? Since the media and events don't change on a regular basis it would make sense to keep a running backup of the file which stores the edits. Can anyone enlighten me please?

The edit information is saved in currentversion.fcpproject in the project folder.
Get Pro Versioner to create archive copies for your project and event information.

From which file does oracle tells you that a session has connected success

Hello,
From which log files that Oracle tells you that a session has successfully connect or unsuccessfully connected. Does the listener.log contain this information? Thank you.

902029 wrote:
Hello,
From which log files that Oracle tells you that a session has successfully connect or unsuccessfully connected. Does the listener.log contain this information? Thank you.It depends upon how exactly "success" is defined.
Listener reports status = 0 (success) in listener.log,
even though connection to DB fails with incorrect password.

How to find which files are in the library

Hi there,
I keep almost all of my library as referenced files on external hard-drives because of the small hard-drive that my MBP has. BUT over time I've added some pictures here and there that are stored in my Aperture library. I would like to relocate these pictures, but I don't know which ones they are.
I can go picture by picture and find them, but I would like an easier way.
Is there a way to find all the pictures that are stored in the aperture library?

Bring up the entire Library, for instance by clicking on the All Photos Album.
Open the search HUD and use the 'plus' button to add a search by File Status.
You now have a choice of searching by online/offline and managed/referenced.
Ian

Which file format renders the fastest?

I'm a student and I'm editing variety of file formats and codecs like .wmv, .mp4 (h.264/aac), .mpeg, .mov, and others...
What project settings should I use to render or export these videos fast?
Or, if that is not possible...
What file format should I convert all the videos before editing?
(Like if you are using Final Cut Pro, you convert it to Apple ProRes422 first before you edit)
Thanks guys!

We have two i5 laptops. I ran some tests with intermediate CODECs (Cineform and Matrox). In the case of HD footage it didn't help improve workflow or playback quality at all. The bottleneck is the architecture of a laptop - they just can't move the data around fast enough. CPU wasn't under much strain, GPU (Nvidia in our case) wasn't being taxed and 8GB of RAM should be plenty for basic editing. Ours fly editing DV and do OK with HDV but full HD is just beyond reach for more than a couple of streams or any kind of keying. We do have MXO2 Max units and also eSATA drives attached - the 1st gen i5 systems with Nvidia GPUs are plenty powerful for SD and simple HD jobs. Encoding the Matrox is fast to H.264 - which is great for BD, Vimeo, iPad etc. The reason you see variations in decoding and transcoding speed is that codecs vary in complexity. Many are designed for distribution rather than editing OR in the case of AVCHD (and other Mpeg4 variants) highly compressed to save space/bandwidth. As such they need a lot of computing grunt to decode them. Laptops definitely have limited architecture compared to most desktops. Think of them as having a good engine and tyres but a lousy gearbox.

Which BIOS does provide the more accurate temp reads?

My board is in the sig, and i am talking about the differences between the 1.9 and the 2.4 version here. The difference for the CPU temps is exactly 5 degrees celcius, and 4 degrees for the system temps.
1.9 readings:
CPU: 36°C idle - 61°C full load
System: 34°C
2.4 readings:
CPU: 31°C idle - 56°C full load
System: 38°C
Now, which readings can i trust more?

Any info about the New Bios 2.5 , and the temps ?
They say that it has more fixes about temps !!
The point is that the 2.3 & 2.4 did the job all ready , what this does extra?
I will test it soon , i just download it

How do I change which files are in the library?

Both my husband and I access iTunes under different login ids on one computer. I went into his iTunes to import a cd and discovered that although "his" music folder is the designated media folder, his iTunes is also displaying all of my library in his library. How do I change it so that only "his" music is displayed in his iTunes?

Album or Book?
If Album you can find the ones not already used:
File -> New Smart Album
Album -> is not -> Any
Regards
TD

Classpath is not identifing the class file

Iam developing cumtom java function event in Oracle WorkFlow. Here iam getting ClassNotFoundException. I included all class file in the jar file and the jar file added in the class path
The problem seems be, java compiler not recognising the class which is there in the classpath.. any one suggest on this. ??

Let's get this straight first: ClassNotFoundException is something that happens at runtime; that means you must have been able to compile your program successfully. So it is not the "java compiler not recognising the class".
What does your classpath look like exactly?
Is the class you are trying to use in a package?
Are you correctly importing the class?
Look inside the JAR files in your classpath to check if the class is really present in one of the JAR files.
If you were able to compile the code successfully but you get an error while running it, then the compiler must have been able to find the class while you were compiling it. Are you passing the same classpath to the Java runtime environment as what you are using when you were compiling your code?
And by the way, you posted this question in the forum about generics, but your question does not have anything to do with generics. Please post your questions in the appropriate forum in the future.

Which library file contains all the registered application in win98/win2000

Hi:
Can anyone tell me which file contains all the registered application signature in win98/win200. I am using java to develop an application to open a file in windows system according to the file's extension. For instance, to open a file abc.doc use winword, to open a file abc.xls use excel etc. I know that there's a library file contains all these info., what's the file name, how can i use it. (ie. use what method call to get the associated application name/path according to the file extension).
Thanks very much in advance.

Hi there:
can anyone help with this question, I did try to use the syntax of Runtime.getRuntime().exec("start abc.txt"), but some computers works, others don't. they are all running win2000, did I miss something on the system setting, many thanks in advance.
another question is I want to display the file using different icon according to their type, is there any way to get the icon info. of the registered application from windows registry?
super thanks in advance.

Multiple palette files in a library/class file causes problems

While developing a labview class, I wanted to set the default palette, so I added the relevant dir.mnu file to the class. Unfortunately, the class already had a dir.mnu file in it. On adding the file, I got some error message about a dependency change*(which makes no sesne, how can a palette file have any dependencies !). On saving the class and then attempting to reopen it, LabVIEW claims it is corrupt. Inspecting the xml .lvclass files reveals that when I added the new paletee file, LabVIEW actually just added a second reference to the palette file already in the project, which it then considers to be a problem when it tries loading the class. This is clearly a bug on a number of levels:
It should not be possible for the user to induce LabVIEW to create corrupt xml files through such simple attempts to use documented features.
The underlying problem is that LabVIEW appears to be using the conventional search/linking rules to load library items irrespective of whether they are a vi (which should ahve a unique name) or other file (which might well be legitimately non-unique).
Given the near impossibility of renaming a palette file without breaking palette links this particular bug is extra annoying.
Gavin Burnell
Condensed Matter Physics Group, University of Leeds, UK
http://www.stoner.leeds.ac.uk/
Solved!
Go to Solution.

Sorry for the delay, it took me a little longer to reproduce the problem systematically. Attached are three zip files of the same trivial class. The only difference between them is the contents of the class file itself.
The key point is that I have two folders in my class - Public and Protected (although I haven't actually set the access scope I realise). Each folder has a dir.mnu file in it and there is also a dir.mnu file in the main class folder. The class virtual folder structure maps directly to the on disc version.
In the first zip file the dir.mnu files are not added to the class.
In the second zip dile I added the dir.mnu by right clicking and doing Add file... This is allowed because each dir.mnu has a distinct path. I then save the class file and close it.
To get the third zip file, I reopen the class file. I get a single dependency warning about dir.mnu in one of the sub folders. So I think "fine ok, somethign funny about that dir.mnu file" - note if I'm loading a whole heirarchy of classes I may be told LabVIEW is laoding the dir.mnu file from somewhere completely different in my class structure. I then save the class file to give the thrid zip file.
The lvclass file in the third zip file is corrupt because it has multiple entries for the same file, because it didn't handle having more than 2 items conflicting.
The correct behaviour would be not to invoke the conflicting item names for non vi/ctl document types. I could imagine that there would be similar problems if I had a say a whole range of say README.html files strewn over the place.
Gavin Burnell
Condensed Matter Physics Group, University of Leeds, UK
http://www.stoner.leeds.ac.uk/
Attachments:
Break Class File-1.zip ‏21 KB
Break Class File-2.zip ‏21 KB
Break Class File-3.zip ‏21 KB

Which file does possess the class Swing??

Similar Messages

Maybe you are looking for