Which FireWire Cable for Macbook Pro to Macbook Pro Migration Assistant?

Hi,
I've just purchased a new Macbook Pro 15" (standard - not retina display) and am planning to transfer my files via the Migration Assistant. My question is, I currently have a mid 2009 macbook pro (2.8GHz, 4GB) and was wondering which firewire cable I need to purchase - there are so many different types!
Thanks!

ds store wrote:
Hold T and boot the old Mac's drive to the desktop of the new one or do so during Setup Assistant or later with Migration Assistant.
Setup Assistant runs only once, at first startup when fresh out of the box or when freshly reinstalled from scratch. Migration Assistant is a regular application found in the Utilites folder.
If you're going to move all your stuff over, the easiest and least problematic way is via Setup Assistant. Since the computer is in a completely blank state when SA runs, it can create identical user accounts, permissions, etc., as the original source. MA is an app that runs on an already configured and running system and, hence, can't duplicate user accounts, modify permissions that are already in use, etc.: this can cause vexing issues for new users that may not be to well versed in multiuser operating system administration.

Similar Messages

Which firewire cable for new MacBook Pro and Canon HV20?

I just bought a new MacBook Pro and want to transfer video from my Canon HV20 camcorder (using FinalCut Express). The Canon instructions say to use a "DV cable" and I've learned that the MacBook Pro only has an "800 fire wire" port. Can someone give me the exact type of cable that I should get (even my local Apple Store couldn't help me).
Thanks!

I'm surprised that the folks at the Apple Store couldn't guide you. You just need a firewire cable with the proper fw400 connector on one end and a fw800 connector on the other. Here's one source for both cables and adapters:
http://www.pccables.com/cgi-bin/orders6.cgi?id=ID7468267&rsite=google.comsearc&r code=&action=Cat&search=FIREWIRE

Which Firewire Cable for my MacPro?

I was just about to connect my new external HD to my MacPro, but found out that the Firewire cable doesn't match my MacPro.
When I did a search for buying Firewire 800 cables, three different types showed up! Which Firewire 800 cable to I need for my MacPro 2.93GHz?

There is only one FW800 cable type used by your MP. It's a 9-pin nearly square connector. If you have a cable with a 6-pin rectangular shaped connector, then that is a FW400 cable.

I've got a power cable from my 2011 macbook air which I would like to use as a spare cable for my new 2013 macbook pro, but the design has changed. Is there an adapter available so that I can use it?

I've got a power cable from my 2011 macbook air which I would like to use as a spare cable for my new 2013 macbook pro, but the design has changed. Is there an adapter available so that I can use it?

Welcome to the Apple Support Communities
Use the MagSafe to MagSafe 2 Converter > http://store.apple.com/us/product/MD504ZM/A/magsafe-to-magsafe-2-converter?fnode =51 However, note that the MacBook Air doesn't provide enough energy to charge the MacBook Pro with Retina display, so it could not work

Firewire cable for camera

hello, i would like to find a cable to go from my canon 60d camera to the firewire port. i have been to numerous places and they do not have it. i could not find it at canon as well. any help would be great.
thanks

I'm confussed... Why do you need a FIREWIRE CABLE for, does your computer not have a USB port?
I think what you need is this...
You can find this cable at any RADIO SHACK, WALMART, TARGET, BEST BUY, etc.
Here's a diagram of different types of USB ports, which one does your Camera have?

Which Firewire cable to buy?

I need to buy a firewire cable for my new iMac. I have a Sony FX1E camera which uses a 4 pin Firewire I think!.
Which Firewire cable do I need - there are so many different ones in PC World.

Welcome to the Apple Discussions!
The iMac has a 9 pin Firewire port, so you would need a 4 pin to 9 pin cable. I would check with the camera manufacturer because the camera may require a special cable that they manufacture that prevents the iMac from sending to much wattage and burning out the camera.
Dah•veed

I am moving to the uk from oz and was wondering do i have to replace the whole power cable for my mac book 15inch pro....or can i just replace the actual plug in the wall part ..if i can what is this called as when i look on line it just comes up with the

i am moving to the uk from oz and was wondering do i have to replace the whole power cable for my mac book 15inch pro....or can i just replace the actual plug in the wall part ..if i can what is this called as when i look on line it just comes up with the complete power unit...it seems odd that you have to buy the whole unit again...thanks.matthew

All you need is a plug adaptor, if required. Apple sells an adapter kit:
http://store.apple.com/us/product/MB974ZM/B?fnode=MTY1NDEwMQ&mco=MTA4NDE3MDQ

Which Firewire Cable to Connect Drobo S to 24" Early 2009 iMac? Thank you.

Hello Support Communities,
Which Firewire cable do I need to connect a Drobo S to a 24" early 2009 iMac?
Firewire 800? Firewire 400? 8 pin? 9 pin? 6 pin?
Thank you.

The iMac has Firewire 800 it is a 9 pin connector as shown…
https://en.wikipedia.org/wiki/IEEE_1394
https://upload.wikimedia.org/wikipedia/commons/a/a3/Firewire800.jpg
Wikipedia also says the Drobo S has Firewire 800 & USB2
https://en.wikipedia.org/wiki/Drobo
A Firewire 9 pin to Firewire 9 pin cable should be fine, otherwise you could use USB2 but it is slower & less reliable than FW 800 in my opinion.

"Which Firewire cable should I purchase to connect a late 2006 Intel-based iMac with a 400 port to a Mid 2010 IMac with an 800 port?"

“Which Firewire cable should I purchase to connect a late 2006 Intel-based iMac with a 400 port to a Mid 2010 IMac with an 800 port?”

To connect both iMacs, you need a FireWire 400 to 800 adapter, and a FireWire 400 cable, so you will be able to connect both Macs

Minimal extension cable for 30" display and macbook

I want to use the 30" Cinema display with my macbook, and my macbook wants to be in my lap. This is incompatible with the medussa's head of cords coming out of the video cable and the display's power brick. All I need is about 4 more feet of extension for video cable ONLY -- I don't need to connect the firewire and USB cords from the monitor to my macbook. So my question is this: what is the minimal cord I need to extend just the dual-link dvi output a little farther from the power brick? Do I really need to spend $300 for the fancy 10 meter cables I see when I search for "DVI extension cable" ??
Thoughts or advice, anyone?

You can get a 3' or 6' dual-link DVI cable here for $30 or $40.
<http://www.gefen.com/kvm/cables/hdmi_dvi.jsp#dvidl>
Unfortunately it is male to male so you will need an adapter such as
<http://www.worldofcables.com/oscatalog/CablesProduct/ADP-3770.htm>
There may be cheaper ones, but make sure you get dual-link.

Which firewire interface for Final Cut Pro on MacPro?

I currently own a Presonus Firepod, and it seems to work pretty well, but may sell this when I upgrade from a MacMini to a MacPro. I use my Mac for Logic Pro currently.
I anticipate running Final Cut Pro in the near future, so I'm wondering about the ability to read/generate SMPTE time code that the MOTU traveller supplies?
There will be no external mixer, so this interface will connect directly to speakers & headphones. (would be nice to be able to mute speakers and control headphone mix using just the firewire interface).
I don't anticipate needing more than 2 Mic inputs - and my current mike is a Rode NT1. (As the NT1 is not a top-of-the-line mic, unsure if I should place a lot of emphasis on worrying about the pre-ams?)
I would like decent mic preamps, and ability to graphically monitor input and output levels (is this graphic monitoring necessary, or is just the single overload indicator sufficient?).
Which interfaces in $600-$1500 range would work best with Final Cut Pro - and Logic Pro?

I saw the Traveller ads in Videography mentioning
time code, so I presumed it had an advantage over
other interfaces.
I found this in some ad copy:
"""The Travler provides on-board SMPTE time code synchronization features that allow you to slave your Traveler system to SMPTE time code without a synchronizer. The Traveler provides a DSP-driven phase-lock engine with sophisticated filtering that provides fast lockup times and sub-frame accuracy. The included MOTU SMPTE Console software provides a complete set of tools to generate SMPTE for striping, regenerating or slaving other devices to the computer."""
So it likely uses an audio port for timecode I/O. However, unless you have external equipment that you want to slave to Logic Pro, (or have Logic slave to) e.g. a timecode DAT, then this really is not necessary. FCP would not see the Travaller as a "controllable" device.
For Final Cut Pro use, I'd probably shoot in HDV.
When shooting a green screen near my computer (or
maybe even on-site), I wondered if there would be an
advantage to recording the audio thru an interface
like the traveller.
The advantage is that you could capture additional mics and audio tracks with your mac while the cameras shoot. Just slate your takes and sync up later.
Do I actually need an interface that provides time
code, or is that only needed for movie work?
I have SMPTE I/O on my Unitor8, directly accessable in Logic Pro. In 8 years I've probably used it twice to capture audio from some modular digital multitracks. So, unless you have some specific need.....
Maybe it is simpler just to connect to the mic
directly to the camera's input?
Indeed. You should always have camera audio available. Anything else is supplemental. Alternatively, you could use the Travaller or RME, etc. as a "live to camera" mixer in a studio situation. Plug your mics into the interface, create a submix and send it to the camera while simultaneously capturing each mic to an individual track in Logic Pro. There are many possibilities.
G5 QuadPPC2.5, Ram:12.5g, Magma PCIe-PCI expansion Mac OS X (10.4.8) 2X Hammerfall DSP Digiface+Multiface, Digi 002r, 4X UAD-1

Which is better for education iPad or Macbook air?

I am a grade 8 student and I walk around quite a bit in school and I would like to know which one is better for me?
Which is better for school, and no I can not get the discount.
Macbook Air or
iPad
If macbook Air which size and specs would you reccomend?
And if iPad which storage option, white or black do you reccomend?
And should I buy the iPad 2 or the new one.

Great question.
Word processing for iOS is fantastic, but not as good for citations and things as on the macbook air, though footnotes will be preserved.
The new textbook options on ipad are compelling. You should find out if any of your school textbooks are on there by searching the itunes store. If so, ipad is your choice.
They are different categories of products. the macbook air is an excellent computer.
But I guess I feel this way -- why don't you buy a desktop for the home. and an ipad for school? If you feel you can get all of your notetaking, paper drafts etc. done on ipad, then you can use mountain lion (coming out this summer) to keep it all in sync when you go home.
I do have to warn you that I tried taking my ipad to work. If you use google docs at all, you may find some limitations sometimes. If you stick within the icloud universe, (pages, keynote, and numbers), you may be mostly happy.

Firewire Cable (for target disk mode)

Hi all,
I'm using a Late 2010 27" i5 iMac and a Late 2009 15" MacBook Pro. I'm going to reformat and reinstall the iMac this weekend but need to grab all my Music/Documents (you know the drill) from it. Last time I did this, I did it over a 100mbps network, needless to say it was absolutely horribly slow. So, today I'm going to pick up a cheap-ish firewire cable and target my laptop as a disk using target disk mode.
Which type of Firewire cable do I need to buy? It's either a 4-pin or 6-pin choice, no 9-pins available at the shop I intend to visit. I have no idea what the difference is between them - hardware is definitely not my game.
Both ports look like this (taken from Apple's docs, Firewire 800):
Any advice would be hugely appreciated.
Thanks in advance,
Andy

I'm using a Late 2010 27" i5 iMac and a Late 2009 15" MacBook Pro.
Just verified the specs for these two in MacTracker just to be sure. Yes, both are FW800. So you need a 9-pin to 9-pin FW cable (like these)

Transferring iMac 27" to my Macbook Pro and not using Migration Assistant?

Hello,
I have my new iMac all set up and used Migration Assistant from my old iMac but created a new user account when I first set up my iMac and chose the do not migrate option. I didn't have the right Firewire cord so had to use Migration Assistant to transfer over after I was all set up with internet.
My new iMac is all up and running and I'd like to now migrate all my files to my Macbook Pro without doing it wirelessly (as it took over 24 hours to do last time). I'd like to transfer over files using my external hard drive.
elmac gave me some information in regards to another question which I edited here:
Hi, I use both TM & SuperDuper (2 different EHD's) I copy from SuperDuper (updated daily)(My Home Folder) iTunes you can enable sharing between computers and transfer that way..Photos from iPhoto Library..dragNdrop I use my Network, not as fast as FW..but easier on the mind. When I unpack my mac, I just set up with my email & Apple passwords..After that I repair Permissions then go about transferring.
Can I just transfer my home folder called Tuley from the main hard drive on my iMac to the user account section on my new Macbook Pro? Then I can transfer over the itunes folder etc.? I just want to make sure I'm doing this right.
Message was edited by: spiralgirl

Can I just transfer my home folder called Tuley from the main hard drive on my iMac to the user account section on my new Macbook Pro?
Creating an account in System Preferences isn't the same as just putting a home folder into /Users/. The account needs to be created first.
Then I can transfer over the itunes folder etc.?
Yes.
(52008)

Which mac cable for projector?

Can anyone tell me which mac cable I need for a macbook 13" aluminum, purchased mid-2008?
Many thanks!

i guess itsa standard 3.5mm jack cable, same same used for ipod headphones..
im guessing the monitor has a female connector, in which case you need a 3.5mm male-male jack cable.
should pick one up on ebay for about 2 or 3 pounds. 5 or 6 dollars

Which FireWire Cable for Macbook Pro to Macbook Pro Migration Assistant?

Similar Messages

Maybe you are looking for