Which FM to use while creating a Profit Center using LSMW BAPI

Which FM to use while creating a Profit Center using LSMW using BAPI: BUS0015

Hi,
For creating Profit centre using LSMW bapi method.
You need to give this values in the 1st step of LSMW.
Business Object       BUS0015
Method                    CREATE                                    Create
Message Type         PROFITCENTER_CREATE          Create profit center
Basic Type              PROFITCENTER_CREATE01      Create Profit Center
In We20 port creation use process code as BAPI
Regards,
Shan

Similar Messages

EHP 6.0 While creating Po , profit center not pickup

We have updated EHP 6.0 form ECC 6.0, we are creating import PO , We have asssign WBS elelment in this wbs element assign Profit center.while creting po profit center nop pickup. Note We can not assign profit center material master. Please tell me how can i resolve this problem .

Hi Mohmoud,
We are using account assignment category Q that time we assign WBS element. in WBS element assign PC , while doing PO system not pick up PC. we are not using PC assign material master.
IF we change account assignment category P than time PC pick up form WBS element. when we change account assignment category not pick up PC .
Regards
Jay

TS2446 How do i get my security answers which I have entered while creating my account

How can I retrive my security answers which I had given while creating my account

Welcome to the Apple Community.
Start here (change country if necessary) and navigate to 'Password and Security', reset your security questions using the link provided, you will receive an email to your rescue address, use the link in the email and reset your security questions.
If that doesn't help, you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

How to create a profit center group using MDG-F?

Given that there is a controlling area CA created in ECC. under which there is a standard profit center hierarchy let us call it ABCD created. Under ABCD, there is a Profit Center Group PCG01 already created in ECC. Now what steps (or screens) I should go through on MDG-F if I want to create another profit center group PCG02 that should be placed under PCG01? Thanks for your help.

Hi ,
First of all you need to create Profit Center from Create Change Request by selecting the change request type of PCTR Single Processing.
Complete the all approval of the Profit center. Once your PCTR gets activated , it will go & sits into MDG tables ONLY.
You have to make a replication setup of Local replication for replicating this created PCTR via MDG to the ECC Back end so that you can see the same data in the CEPC table.
Once you are done with this, use Collective Processing form Change Request of PFCG role where you can create your PCTRG & PCTRH . You can assign the PCTR to PCTRG & PCTRH accordingly.
Hope this answers your all questions.
Best Regards,
Kaustubh

Creating 2 profit center documents while posting through FB01

while creating FI document using FB01 with 800 line items ,
its creating 2 Profit center documemnts where its spliting the total line items.
why its creating 2 profit center documents ,is there any limitation for no.of line items.
I want it to be in only one Profit center document.
Could any one help me..!!

Maintain the layout settings in FB01

HT201303 How can I reset my Credit Card Info which I have submitted while creating my Apple ID

How can I reset my Credit Card Info which I have submitted while creating my Apple ID

iTunes Store: Changing Account Information
http://support.apple.com/kb/HT1918

Profit center document created but profit center not updated in FI document

Hi Experts,
I have a strange issue; we created FI document via billing document (SD) where in profit center document got created but profit center is not updated in FI document.
We have separate table to identify the profit center by customer.
Please let know what could be the cause or reason for this kind of scenario
Thanks,
VK

Hi Krishna,
Though ur question seems very old, but now i got the same requirement as like you.
So if you remeber what needs to be done for this issue thats very good help to me.
My Requirement is : I have created Service Entry Sheet by referring PO and while releasing this Service Entry Sheet system is generating MIGO Doc and FI documents in background.
And I have updated PERNR (Persnoal No.) in MSEG-SGTXT by using enhancment but it's not populating in BSEG-SGTXT.
And I found an internal table while debugging i.e ; like ACCIT (not exactly ,similar to this ) where i have updated pernr and sgtxt but same thing will not available in FI Doc display (BSEG-PERNR or BSEG-SGTXG)
So could you plz suggest what needs to be done to achieve this. Im assuming that, is it possible through BTE (Business Transaction Events) ?. if yes, plz tell me how to proceed.
Thanks
Madhan

Creating 2 profit center documents

while creating FI document using FB01 with 800 line items ,
its creating 2 Profit center documemnts where its spliting the total line items.
why its creating 2 profit center documents ,is there any limitation for no.of line items.
I want it to be in only one Profit center document.
Could any one help me..!!

Maintain the layout settings in FB01

Unable to create the Profit center groups

Hi,
We have created new company codes in R3Dev and also created the
validation rules for the same. We have assigned the Set ID's to the
validation rules. These Set ID's gets created when profit center groups
are created for the new company codes.
We have transported the company code configuration settings and the
validation rules to R3QA.
Now in R3QA, when I try to create the profit center groups in KCH5N for
the new company codes, it says "the group already exists".This is
caused due to the SET ID's which also got transported along with
validation rules. I have checked the table 'SETHEADER" which shows the
SET ID's for the new company codes.
Could you please a solution to resolve this issue.
Thanks
Rakesh

Hi Mohan,
Since Set Id's have moved to quality along with vaidation rules, I am to create the profit center groups, as it says the group already exists. I believe the set Id's need the master data maintained in R3Q, before they are transported. Since this is not maintained, with the transport, the data is sitting for Set Ids at the table level (Table: SETHEADER), because of which I am to unable to create the profit center groups.
Thanks,
Rakesh

Create Substitution Profit Center when MIRO (invoice)

Dear all
How to create substitution profit center and this the requiredment:
When i create invoice MIRO there is tax account 11701105 and i want to substitute profit center in that account,
i have create substitution like this, in GGB1 ,>financial accounting> line item >step 1>SYST-TCODE = 'MIRO' AND BSEG-HKONT = '11701105' AND BSEG-WERKS = '1000
why this not worked, did i miss other config?
please help
Best Regards
adit

Hi Aditya
thats true.. MIRO line items do not always have PLANT... You can refer the following notes for this
0000032654 High level automatic account assignment
0000105024 Automatic a/c assignment (OKB9) does not work
0000409520 Goods/invoice receipt: Default account assignment ignored
If your idea is to populate a Profit center based on Plant, then you would need to use a FI Substitution with user exit RGGBS000 and write your code to fetch the WERKS from preceeding MM document and populate WERKS as well as PRCTR based on it...
But, before you do this, let me ask you a question.. Are you not using Document splitting in New GL? If you use it, PRCTR gets populated always in all the line items..
Regards
Ajay M

Create Substitution Profit Center when billing

Dear all
How to create substitution profit center and this the requiredment:
When i create billing VF01 there is tax account 21117106 and i want to substitute profit center in that account, since i maintain 3KEH.
i have create substitution like this, in GGB1 ,>cost accounting> line item >step 1>COBL-SAKNR = '21117106' and COBL-VKORG = '3000'
why this not worked, did i miss other config? how to assign tcode in substitution, like just valid in VF01?
please help
Best Regards
adit

Hi Aditya
Tax account is a balance sheet account which will never flow into CO at all.. So, your CO subst will never be called for this line item
Subst in CO can be written only for Cost Elements
Subst in EC-PCA can be written for populating profit center in Sales orders
But, Subst in FI can be written for all GL accounts, especially the balance sheet ones
Hope, it is clear... You need to write subst in FI, and not in CO for VAT line item
Regards
Ajay M

On which data we do the plannings costcenter profit center n all

Hi gurus i am new to bps
plz can anybody will giveme the info abt this
on which data we do the plannings costcenter profit center n all
like general bw sales fico cubes r bydoing copa extraction also
plz give me any docsthat will give idea abt this .
thanks in advancde plz
Regards,
jay

Some useful links for profit center planning
http://help.sap.com/saphelp_46c/helpdata/en/eb/13740b43c411d1896f0000e8322d00/content.htm
PCA datasources
http://help.sap.com/saphelp_nw04/helpdata/en/de/46663758459166e10000009b38f8cf/content.htm
Related BI content
http://help.sap.com/saphelp_nw04/helpdata/en/4b/82453ff168e07fe10000000a114084/content.htm

Error While deleting the Profit Center

Hi I am getting the below error while deleting the Profit center. Please help me how to fix this issue...
Profit center Scenario was activated in New GL Accounting
what configurations do i need to change to fix this error? Kindly advise me..
Thanks
Kishore

Dear,
while deleting the profit center we have to requrie follow the steps
1) OBR1 - Reset Transaction data
2)OBR2 - Reset the master data
3)OKKS - Set Controlling Area
4)OKC3 - Delete Transcation Data
5) KL14 - Delete Activity Types
6)OKE5 - Profit center De - Active
7)OKE1 - Profit center Transcation data delete
8)OKE2 - profit center delete
if if you follow above steps easily we can make the delete the profitcenter and we donot have to activate profitcenter
i hope solve you r problem
With regards /G chandu

Create new Profit Center?

Hi,
We want to create 2 new profit centers. What are the necessary steps to be consider before create a new profit center? Is it reqd to create Profit Center Group, Standard Heirarchy, Dummy Profit Center etc., I am very new i.e., y am asking basic things.
Is there any way to copy from existing profit center? or can i copy profit center group from existing PC group in TC: KCH1? If i can do this i think all profit centers are copied to new PC group. How to achive this?
Thanks

Hi
1. set controlling area (OKKS)
2.maintain controlling area settings(OKE5)
3.create dummy profit center(KE59)
4.set control parameters for actual data(1KEF)
5.maintain plan versions(OKEQ)
6.allow balances to be carried forward(2KET)
7.maintain standard hierarchy(KCH4 in IMG or KCH1 in Easy Access)
8.Create profit center(KE51)
9.Assignment of profit centers in cost centers(KS02)
10.creation of revenue elements(KA01 or FS00)
11.maintain automatic account assignment of revenue elements(OKB9)
12.defone number ranges for local documents(GB02) both for actual and plan documents.
13.choose additional balance sheet and P&L accounts(3KEH)
These are the configuration steps.
Standard hierarchy and dummy profit centers must to be created before creation of profit centers.
Regards
Venkat

Sales Order Creation using LSMW-BAPI.

Hai,
While executing a 14th step in LSMW-BAPI,the IDOC is generated.While Testing the IDoc the values for the Header segment alone is displayed.The Segment sfor Item is not Displayed.Should there be any link between Header & the ITem.
Regards,
Padmam.

Hi,
Can u tell me the steps to create a sales order using idoc, i've created a bapi but thats a temprory use. I wanted to created a sales order automatically when a purchase order is saved.
Please let me know if u can help me, i wanted to do it using idoc
Regards
Sanju

Which FM to use while creating a Profit Center using LSMW BAPI

Similar Messages

Maybe you are looking for