Which font should I select in the /arch/setup?

I am totally new to arch.
I have downloaded and burned the 0.7.2 iso and wanted to install it on my IBM Thinkpad T40: 1.5GHz Pentium M + ATi Radeon Mobility 7500 (the R100 GPU ).
I have read the Installation Guide a number of times but it doesn't help me with my problem.
I have searched this forum and could not find the answer either.
My problem is this:
When I run the /arch/setup and come to the step as to selecting your font, the ones I have tried don't seem to work.  Either I get no font showing whatsoever or I get all sorts of ugly background characters appearing.  I've tried it about 7 times but each time, of course, I have to retstart the computer which is tiresome.  I was hoping someone could help me out by recommending a font that I should try.

LOCALE="ru_RU.UTF-8"
HARDWARECLOCK="localtime"
TIMEZONE="Asia/Yakutsk"
KEYMAP="ru-utf"
CONSOLEFONT="/usr/share/kbd/consolefonts/cyr-sun16.psfu.gz"
CONSOLEMAP="cp866_to_uni.trans"
USECOLOR="yes"
I've taken from http://citkit.ru/articles/211/
and
from http://calculator.gentoo.ru/localization#2.2
Just for someone who's needed this is sample for cyrillic
Last edited by berrold (2008-02-09 01:50:02)

Similar Messages

  • I want to buy iPad mini wifi  + cellular for indian freind. Which Carrier should i select while buying it online?

    I want to buy iPad mini wifi + cellular for indian freind. Which Carrier should i select while buying it online?
    As far as i know service provider is not a constraint for i pad as ipads are always unlocked. Also, do we need to get nano sim from US or India srvice provider will have it? i am asking this as in Singapore iPads are offering 3 free nano sim cards.

    There is no CDMA in Europe or UK if that influences you, only GSM
    All the UK Carriers offer Data nano sims ,on contract or PAYG
    and this will help on 4G
    http://www.apple.com/ipad/LTE/
    and be aware the warranty is now not international

  • I just connected my Mac Mini running OS 10.6.8 to a IG 32' monitor. What resolution should I select from the menu?

    I just connected my wife's Mac Mini running OS 10.6.8 to an IG 32' monitor. What resolution should I select from the menu in order to provide maximum screen appearance? My wife has AMD and a visual acuity of 20/400 with central scotonata.

    In System Preferences:Displays you have an option to show
    Displays Prefs in the title bar above the screen - where she can
    iteratively adjust to her liking. Higher screen resolutions, ironically,
    result in smaller characters so adjust to suit. Below, Displays is
    4th from L.
    All best, Tom

  • HT3669 which driver should i use for the epson LX300 matrix-dot printer??

    which driver should i use for the epson LX300 matrix-dot printer??? I dowloaded all drivers for epson but i didn't find the driver for the LX300.
    I bought an i mac not so long ago, can anyone help me about this?

    i use parallels desktop 7 because i use a program for work with windows XP. Is there really no solution?

  • Which Image should we need for the below model router 2951 to support 4 Byte ASN number ?

    Hi All,
    Which Image should we need for the below model router 2951 to support 4 Byte ASN number ?
    CISCO2951/K9
    Cisco 2951 w/3 GE 4 EHWIC 3 DSP 2 SM 256MB CF 512MB DRAM IPB
    PWR-2921-51-AC
    Cisco 2921/2951 AC Power Supply
    CAB-ACSA
    AC Power Cord (South Africa) C13 BS 546 1.8m
    HWIC-BLANK
    Blank faceplate for HWIC slot on Cisco ISR
    ISR-CCP-EXP
    Cisco Config Pro Express on Router Flash
    MEM-2951-512MB-DEF
    512MB DRAM (1 512MB DIMM) for Cisco 2951 ISR (Default)
    MEM-CF-256MB
    256MB Compact Flash for Cisco 1900 2900 3900 ISR
    SM-S-BLANK
    Removable faceplate for SM slot on Cisco 290039004400 ISR
    SL-29-IPB-K9
    IP Base License  for Cisco 2901-2951
    S2951UK9-15501T
    Cisco 2951 IOS UNIVERSAL
    EHWIC-1GE-SFP-CU
    EHWIC 1 port dual mode SFP(100M/1G) or GE(10M/100M/1G)

    > Can someone suggest ?
    a forum is no realtime-communication ... ;-)
    For the ISR G1, it was supported from 12.4(24)T, so I would assume that your ISR G2 has this feature if you are running 15.x.
    EDIT: The Feature-navigator says that it's supported starting with 15.1(2)T.

  • Missing font - Helvetica not included in the CS6 setup

    Hi,
    Cannot see that Helvetica is included in the CS6 setup I bought. Why is that so? It's a most common font.
    Best regards
    Cecilia

    Helvetica does not and has never come with Photoshop.
    Photoshop uses the operating system fonts.  Windows does not have Helvetica, Mac OSX does. Therefore it will show up in the Mac version of Photoshop.
    You have to purchase it separately and install it yourself in Windows or get a Mac.
    http://store1.adobe.com/cfusion/store/html/index.cfm?store=OLS-US&event=displayFontPackage &code=1210

  • Which value should I send for the field "business partner type " in DTW

    I need your help. I am trying to create a new business partner using DTW. Please let me know wich possible values should I send to DTW for the field "Business Partner Type" (this label appears on sap-bo when enteringa new BP).
    The database field name is OCRD.cmpprivate, so I tried to find the related field in the input file and I found "CompanyPrivate" is this the corresponding field for the "business partner type"?
    I have been trying with the following values but the DTW fails with the error "invalid item name in enum BoCardCompanyTypes":
    tYES
    tNO
    cCompany
    cPerson
    I
    C
    cI
    cC
    Thank you for your help
    Jorge Manzo

    Please note: I use DTW Version 88.1.7; API Version 8.81.319
    To set  CmpPrivate (it is exactly BoCardCompanyTypes) use following:
    cCompany - Card represent a company.
    cPrivate - Card represent a private person.
    To set CardType see Godon's replay.
    A lot of info you can find in "SAP Business One SDK - Help Center" docs.
    Thanks,
    Grzegorz

  • Which Linksys hardwares would give me the same setup as Starbucks or Panera Bread WiFi?

    Hi all,
    I'm looking for a piece of Linksys hardware for my small 24 units apartments. I want to have the same control and capability as Starbucks Or Panera Bread wireless. When I got to Starbucks or Panera Bread and connect to their wireless...it would first connect to their website and I have to click on "agree" to their terms and condition before I can go on to access other websites. Also, I would like to setup an option where the user must obtain the code from frontdesk in order for them to access the website.
    Any help would be greatly appreciated!
    Thanks,
    Henry

    this kind of an authentication is not possible with the linksys SOHO products...it could be possible with the enterprise level products..
    however, you can set up a wireless security on the wireless access point and this requires every user to enter the passcode to connect to the network...here , one problem could be that once connected to the network , the password will be saved on the user's computer...they need not enter the password again...
    the set up you can have is like
    modem -> a wired router -> WAP54GPE 
    the next WAP54GPE will be configured in wireless repeater mode...the number of WAPs will depend on the kinda range you want...the range of a WAP54GPE is around 300 fts....

  • In OB29 which box should I flag on if I want to select my fiscal variant N6

    Hello,
    On BW side I want to select my fiscal year varaint as N6, so I go to tcode OB29 and which cloumn should i flag on the first one or second (year dependent or calendar year) right now none of that boxes are selected. ?
    The calendar year cloumn has 5 boxes flaged on K0 to K5 what does that mean ?
    Can i make the changes staright away in production?
    After making the changes do i have to reload the data to get right periods for the transaction data?
    Thanks in advance

    fiscal year variants are usually defined on the source system. We transfer the global settings from the source system to BI for currencies, fiscalyear variants, UOM, factory calender. Go to source system, right click on ur source system - transfer global settings - fiscalyear variants - Mode - update tables.

  • Planning on selling 1 of the 10.5.6 DVDs, which one should I keep?

    I have 2 Mac OS X 10.5.6 DVDs, the gray retail one that came with my computer and one I had bought separately with the spacey background. Which one should I keep? And when Snow Leopard comes should I sell the remaining OS X DVD or keep it in case there are computer problems and I need to reinstall?

    I have 2 Mac OS X 10.5.6 DVDs, the gray retail one that came with my computer and one I had bought separately with the spacey background. Which one should I keep?
    The one which you got with the computer.
    And when Snow Leopard comes should I sell the remaining OS X DVD
    No. That DVD isn't allowed to be sold separately from the computer it came with and cannot be used to install the OS on a different Mac model.
    (46282)

  • Adhoc Query : Error during selection; check the selection conditions

    Hi
    We have a report set-up and which we want to run using our adhoc query report tcode S_PH0_48000513
    The report, has a few different selection criteria in it to look at all action IT screen data in the system for ee's in specific personnel areas. There is also a criteria to allow us to paste in specific employee numbers we are interested in. The issue I am facing is that over about 3000 ids, the system automatically returns me a message when I click on the Output button to run the report which states:
    Error during selection; check the selection conditions
    Message no. PAIS206
    I am not sure why this is happening. The selection criteria are fine and the other day I ran the report and I experienced no issues. The report ran successfully. Now though, if I try and paste in all the ids I am interested in (about 8000) I get this message straightaway.
    Can anything be done to overcome this issue?
    Any advice would be much appreciated.
    Nicola

    Hi
    The message in full is:
    Error during selection; check the selection conditions
    Message no. PAIS206
    Diagnosis
    A runtime error occurred during dynamic selection.
    System response
    The runtime error will be caught; no short dump will be created. This error should not occur as a rule. However, very large select statements may trigger the runtime error SAPSQL_STMNT_TOO_LARGE or DBIF_RSQL_INVALID_RSQL. There is no way to prevent this happening. In this case, the error can only be caught.
    Procedure
    Check the selection conditions to see whether the error was caused because the option "Import from text file" included too many objects in the "Multiple selection" dialog. If this is so, you must limit the number of individual values.

  • What export options in Quicktime Pro or Final Cut Pro should I select to export  HDV video in .MOV files to highest quality Windows-compatible files?

    I have some HDV video files imported through iMovie to .MOV files with Apple Intermediate Codec.
    I need to convert these to Windows compatible video files of the highest possible ( least loss) quality.  What export options in Final Cut Pro or in Quicktime Pro should I select?  The codex in the converted files must not be Apple Intermediate Codec, for which there is no Windows version.

    Okay, I read the whole Flip4Mac website.
    Flip4Mac is an application for Apple computers. 
    Perhaps my question was unclear.  When I posed it I was thinking of asking somebody with an Apple shop to do the conversion for me, and wanted advice on settings for his QUicktime Pro /Final Cut Pro that would produce the highest quality Windows -compatible files.
    The Windows version of Quicktime will not play Quicktime files with Apple Intermediate Codec.  You get black screen video, although the audio does come through.
    So here's what I need:  I need a Windows application that will transcode Quicktime files in Apple Intermediate Codec, with no loss or very little loss, to WIndows-compatible files.   All Windows, all the time.  Thank you.

  • Select just the values between min and max of an accumulated value over day

    Hello Forum,
    a value is accumulated over a day and over a period of time. Next day the value is reseted and starts again to be accumulated:
    with sampledata as (select to_date('09.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                       select to_date('09.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                       select to_date('09.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                       select to_date('09.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                       select to_date('09.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                       select to_date('09.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                       select to_date('09.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union all
                       select to_date('09.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 29 val from dual union all
                       select to_date('09.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 30 val from dual union all
                       select to_date('09.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 45 val from dual union all
                       select to_date('09.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 60 val from dual union all
                       select to_date('09.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 75 val from dual union all
                       select to_date('09.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 95 val from dual union all
                       select to_date('09.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                       select to_date('09.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                       select to_date('09.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                       select to_date('09.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                       select to_date('09.09.2012 17:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                       select to_date('09.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                       select to_date('09.09.2012 23:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                       select to_date('10.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                       select to_date('10.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                       select to_date('10.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                       select to_date('10.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                       select to_date('10.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                       select to_date('10.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                       select to_date('10.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 14 val from dual union all
                       select to_date('10.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 34 val from dual union all
                       select to_date('10.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 58 val from dual union all
                       select to_date('10.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 70 val from dual union all
                       select to_date('10.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                       select to_date('10.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                       select to_date('10.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                       select to_date('10.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                       select to_date('10.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                       select to_date('10.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                       select to_date('10.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                       select to_date('10.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual)
    select   ts, val
    from     sampledata
    order by ts asc;How should I change the select statement to skip all data sets before the first minimum and the duplicates after the maximum of a day in order to get such a result:
    TS     VAL
    09.09.12 06:12     23
    09.09.12 07:12     29
    09.09.12 08:12     30
    09.09.12 09:12     45
    09.09.12 10:12     60
    09.09.12 11:12     75
    09.09.12 12:21     95
    09.09.12 13:21     120
    09.09.12 14:21     142
    10.09.12 06:12     14
    10.09.12 07:12     34
    10.09.12 08:12     58
    10.09.12 09:12     70
    10.09.12 10:12     120
    10.09.12 11:12     142
    10.09.12 12:21     153Thank you

    This solution works perfectly when the accumulated value has its low and its high on the same day. But I found out :( , that there is also data, which has its low yesterday and its high today. For a better understandig of the case, there is a machine, wich is working over 3 Shifts with irregular start and end time. For example Shift1 cann start at 5:50 or at 7:15. The accumulated value of the worked time is accumuated for each shift extra. This solution works for the shift 1 (approximate between 06:00-14:00) and for the shift 2(approximate between 14:00-22:00), because there is the low and the high of the accumulated value on the same day. This solution does not work for the shif 3(approximate between 22:00-06:00), because the high of the accumulated value is or can be the next day.
    So the thread title should be: "Select just the values between min and max of an accumulated value over the same day(today) or over two successive days (yesterday and today)
    Sampledata for shift 1 or shift 2:
    {code}
    with sampledata as (select to_date('09.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
    select to_date('09.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
    select to_date('09.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
    select to_date('09.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
    select to_date('09.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
    select to_date('09.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
    select to_date('09.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union all
    select to_date('09.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 29 val from dual union all
    select to_date('09.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 30 val from dual union all
    select to_date('09.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 45 val from dual union all
    select to_date('09.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 60 val from dual union all
    select to_date('09.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 75 val from dual union all
    select to_date('09.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 95 val from dual union all
    select to_date('09.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
    select to_date('09.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
    select to_date('09.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
    select to_date('09.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
    select to_date('09.09.2012 17:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
    select to_date('09.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
    select to_date('09.09.2012 23:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
    select to_date('10.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
    select to_date('10.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
    select to_date('10.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
    select to_date('10.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
    select to_date('10.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
    select to_date('10.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
    select to_date('10.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 143 val from dual union all
    select to_date('10.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 144 val from dual union all
    select to_date('10.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 145 val from dual union all
    select to_date('10.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
    select to_date('10.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 147 val from dual union all
    select to_date('10.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 148 val from dual union all
    select to_date('10.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
    select to_date('10.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
    select to_date('10.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
    select to_date('10.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
    select to_date('10.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
    select to_date('10.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual)
    , got_analytics     AS
         SELECT ts, val
         ,     MIN (val) OVER ( PARTITION BY TRUNC (ts)
                        ORDER BY      ts DESC
                        )      AS min_val_after
         ,     CASE
              WHEN ROW_NUMBER () OVER ( PARTITION BY TRUNC (ts)
                             ORDER BY     val
                             ,      ts     
                             ) = 1          
              THEN -1 -- Impossibly low val
              ELSE LAG (val) OVER ( PARTITION BY TRUNC (ts)
                             ORDER BY      ts
              END           AS prev_val
         ,     MIN (val) OVER (PARTITION BY     TRUNC (ts))
                        AS low_val_today
         ,     NVL ( LAST_VALUE (val) OVER ( ORDER BY ts
                             RANGE BETWEEN UNBOUNDED PRECEDING
                                  AND     ts - TRUNC (ts) PRECEDING
              , -1
              )          AS last_val_yesterday
         FROM sampledata
    SELECT     ts
    ,     val
    FROM     got_analytics
    WHERE     val          <= min_val_after
    AND     val          > prev_val
    AND     (      val     > low_val_today
         OR     val     != last_val_yesterday
    ORDER BY ts
    {code}
    with the expected results:
    {code}
    1     09.09.2012 06:12:02     23
    2     09.09.2012 07:12:03     29
    3     09.09.2012 08:12:04     30
    4     09.09.2012 09:12:11     45
    5     09.09.2012 10:12:12     60
    6     09.09.2012 11:12:13     75
    7     09.09.2012 12:21:24     95
    8     09.09.2012 13:21:26     120
    9     09.09.2012 14:21:27     142
    10     10.09.2012 06:12:02     143
    11     10.09.2012 07:12:03     144
    12     10.09.2012 08:12:04     145
    13     10.09.2012 09:12:11     146
    14     10.09.2012 10:12:12     147
    15     10.09.2012 11:12:13     148
    16     10.09.2012 12:21:24     153
    {code}
    And the sampledata for shift 3 is:
    {code}
    with sampledata as (select to_date('08.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union ALL
    select to_date('08.09.2012 02:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 45 val from dual union all
    select to_date('08.09.2012 05:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 78 val from dual union all
    select to_date('08.09.2012 06:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
    select to_date('08.09.2012 08:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
    select to_date('08.09.2012 10:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
    select to_date('08.09.2012 12:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
    select to_date('08.09.2012 16:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
    select to_date('08.09.2012 17:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
    select to_date('08.09.2012 19:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
    select to_date('08.09.2012 21:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
    select to_date('08.09.2012 22:00:12', 'dd.mm.yyyy hh24:mi:ss') ts, 24 val from dual union all
    select to_date('08.09.2012 22:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 40 val from dual union all
    select to_date('08.09.2012 23:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 68 val from dual union all
    select to_date('09.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 79 val from dual union all
    select to_date('09.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 124 val from dual union all
    select to_date('09.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 125 val from dual union all
    select to_date('09.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 126 val from dual union all
    select to_date('09.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
    select to_date('09.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
    select to_date('09.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
    select to_date('09.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
    select to_date('09.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
    select to_date('09.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
    select to_date('09.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
    select to_date('09.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
    select to_date('09.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
    select to_date('09.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
    select to_date('09.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
    select to_date('09.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
    select to_date('09.09.2012 17:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
    select to_date('09.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union ALL
    select to_date('09.09.2012 22:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 5 val from dual union ALL
    select to_date('09.09.2012 22:51:33', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union all
    select to_date('09.09.2012 23:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 40 val from dual union all
    select to_date('10.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 50 val from dual union all
    select to_date('10.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 60 val from dual union all
    select to_date('10.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 78 val from dual union all
    select to_date('10.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
    select to_date('10.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 145 val from dual union all
    select to_date('10.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
    select to_date('10.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
    select to_date('10.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
    select to_date('10.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
    select to_date('10.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
    select to_date('10.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
    select to_date('10.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
    select to_date('10.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
    select to_date('10.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
    select to_date('10.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
    select to_date('10.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
    select to_date('10.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
    select to_date('10.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual)
    , got_analytics AS
    SELECT ts, val
    , MIN (val) OVER ( PARTITION BY TRUNC (ts)
    ORDER BY ts DESC
    ) AS min_val_after
    , CASE
    WHEN ROW_NUMBER () OVER ( PARTITION BY TRUNC (ts)
    ORDER BY val
    , ts
    ) = 1
    THEN -1 -- Impossibly low val
    ELSE LAG (val) OVER ( PARTITION BY TRUNC (ts)
    ORDER BY ts
    END AS prev_val
    , MIN (val) OVER (PARTITION BY TRUNC (ts))
    AS low_val_today
    , NVL ( LAST_VALUE (val) OVER ( ORDER BY ts
    RANGE BETWEEN UNBOUNDED PRECEDING
    AND ts - TRUNC (ts) PRECEDING
    , -1
    ) AS last_val_yesterday
    FROM sampledata
    SELECT ts
    , val
    FROM got_analytics
    WHERE val <= min_val_after
    AND val > prev_val
    AND ( val > low_val_today
    OR val != last_val_yesterday
    ORDER BY ts
    {code}
    with the unexpected results:
    {code}
    - ts val
    1     08.09.2012 00:04:08     23
    2     08.09.2012 22:12:13     40
    3     08.09.2012 23:21:24     68
    4     09.09.2012 22:21:33     5
    5     09.09.2012 22:51:33     23
    6     09.09.2012 23:21:33     40
    7     10.09.2012 00:04:08     50
    8     10.09.2012 01:03:08     60
    9     10.09.2012 02:54:11     78
    10     10.09.2012 03:04:08     142
    11     10.09.2012 04:04:19     145
    12     10.09.2012 05:04:20     146
    {code}
    The result should be:
    {code}
    - ts val
    1     08.09.2012 00:04:08     23
    2     08.09.2012 02:04:08     45
    3     08.09.2012 05:03:08     78
    4     08.09.2012 06:54:11     90
    5     08.09.2012 22:00:12     24
    6     08.09.2012 22:12:13     40
    7     08.09.2012 23:21:24     68
    8     09.09.2012 01:03:08     79
    9     09.09.2012 02:54:11     124
    10     09.09.2012 03:04:08     125
    11     09.09.2012 04:04:19     126
    12     09.09.2012 05:04:20     127
    13     09.09.2012 22:21:33     5
    14     09.09.2012 22:51:33     23
    15     09.09.2012 23:21:33     40
    16     10.09.2012 00:04:08     50
    17     10.09.2012 01:03:08     60
    18     10.09.2012 02:54:11     78
    19     10.09.2012 03:04:08     142
    20     10.09.2012 04:04:19     145
    21     10.09.2012 05:04:20     146
    {code}
    Thank you for your help!

  • How to make the first row  selected before the display of ALV grid

    Hello Experts,
    I created a ALV grid using custom container in a screen . Now i want do the follwing:
    1. i want that, the  <b>first line must be selected before the display of ALV.</b>
    2. I have selection buttons . But i dont want the multiselect button and the  
        standard  toolbar in the ALV grid.
    Could any one please help me regarding the above?
    Thanks & Regards
    Sudhansu

    can u pls explain in more details with an example?
    I am telling u the scenario.
    1. i have a screen(Modal dialog Box)  containing ALV grid with selection buttons for each row  (top part) and a subscreen(second part).
          Now when i click on a selection button, it will display the corresponding values in the subscreen.
        When this screen will display for the first time , then first row of the ALV grid should be selected and the corresponding values should be displayed in  the subscreen.
    i   wrote the following code in the PAI. But when i select a record its not triggering the PAI.
    DATA:
         gi_index_rows TYPE lvc_t_row, " Internal table for indexes of selected rows
         g_selected_row LIKE lvc_s_row, " Information about 1 row
         l_lines TYPE i.
      CLEAR g_wa_vdmeko.
    *get selected row
      CALL METHOD g_alv_grid->get_selected_rows
        IMPORTING
          et_index_rows = gi_index_rows.
      DESCRIBE TABLE gi_index_rows LINES l_lines.
      LOOP AT gi_index_rows INTO g_selected_row.
        READ TABLE g_int_vdmeko INDEX g_selected_row-index INTO g_wa_vdmeko.
        SELECT SINGLE  *
               FROM vdmepov
               WHERE bukrs = g_wa_vdmeko-bukrs AND
                     styp  = g_wa_vdmeko-styp  AND
                     sbez  = g_wa_vdmeko-sbez  AND
                     svym  = g_wa_vdmeko-svym  AND
                     svnr  = g_wa_vdmeko-svnr.
      ENDLOOP.
    I am displayinng the ALV using method "set_alv_for_first_display".
    Please help if u have any idea..................
    Thanks
    Sudhansu

  • BOM selection at the time of confirmtion

    Dear Experts,
    My client has requirement that BOM should be selected at the time of confirmation if there are multiple BOM's are available for the same material.Is it possible ??.
    Edited by: manjit_pune on Mar 7, 2012 10:07 AM

    Hello Manjit,
    As a SAP fucntion, BOM should be selected/exploded at the time of MRP so that SAP would be in position to plan the components accordingly. What the reason or benefit of selecting relevant BOM at the time of confirmation ??
    In any case, this function is not possible in standard SAP.
    Regards,
    Anup

Maybe you are looking for

  • Error in SSO between Portal and IDM

    Hi All, In my scenario i need to configure the IDM workflow in portal and do SSO between them. I followed the steps given in IDM-Workflow installation document and did following things. 1. Uploaded the par file available in IDM installation kit in to

  • Local Adjustment Brush does not work in Windows 7, 64-bit

    All other tools and functions work OK.  My issue is just with the Adjustment Brush;  The Adjustment Panel opens when the brush is selected and the brush moves, but none of the adjustments are applied to the image.  The problem is clearly related to t

  • MacBook Pro randomly restarting since upgrading to Mavericks. Help!

    Ever since I downloaded Mavericks, my 2010 MacBook Pro is randomly restarting due to a GPU panic. I tried all the trouble shooting suggested by apple support via telephone (updating software, reinstalling mavericks, repairing disks). It is still rest

  • LabVIEW applicatio​n fails to run properly at Windows startup

    I have experienced problems with my Labview application after putting it in the Windows XP startup folder. The application runs perfectly if I start it manually but whenever I get Windows XP to start it after boot-up, I see various error messages. My

  • Error code -The app didn't start

    I try to start application but get error: Unable to activate Windows Store app 'AppName'. The ProcessName process started, but the activation request failed with error 'The app didn't start' And there is line  in the output - has exited with code -21