Exporting Exchange User Details (get command)

Hi,
Which 'get' command I can use to export all Exchange AD user details like; Name,DisplayName,OrganizationalUnit,RecipientType,Title,Department,Office,Company,City,Manager
which should be exported to a CSV file (to use it with another HR application)
worth to mention: I need the report in CSV format itself for some reason.
[I have tried
get-mailbox
and
get-mailboxstatistics
but doesn’t give all required fields.
Then I tried
get-user but it gives only one column with some unique ID ]
I have used the following get-user cmnd;
Get-User -resultsize unlimited |FT Name,DisplayName,OrganizationalUnit,RecipientType,WindowsEmailAddress,Title,Department,Office,Company,city
| Export-csv D:\userdetails.csv
Please suggest
Don't use FT before Export-CSV. That screws up the output and you probably aren't getting the information. Try Get-User -ResultSize Unlimited | select name, displayname, OrganizationUnit, Re........ | Export-CSV -path <path for csv>.csv -NoType
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Similar Messages

Exchange User IP - Get Object Returns Body of E-Mail As HTML

All,
Using Orchestrator to monitor a mailbox and create System Center Service Manager incident from it. I am utilizing the Activity Directory User IP to monitor to the mailbox, pull the subject/body/send from the e-mail, and create an incident. Everything
works as planned. However, the body of the e-mail is being passed to the description of the incident as HTML. It includes all of the HTML tags sent from the e-mail and makes it very difficult to read.
Is it possible to pass the body of the e-mail as RTF rather than HTML? If not, what activities can I utilize in Orchestrator/PowerShell to get this behavior?
Thanks,
Tim

Hi Tim,
I just blogged my solution here http://www.sc-orchestrator.eu/index.php/scoblog/118-e-mail-body-in-plain-text
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.

Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.
First my organize has Exchange on 2 site like
site A (internet facing) : 2CAS 2 MB all are Services pack1
site B (DR Site , no user active on this site) : 2CAS 2MB all are Services pack 1
so today I upgrade Exchange 2013 from SP1 to CU5 start on "site B" and I found this issue and the details is....
When I open EMS on any CU5 for query something (like get-mailboxdatabasecopystatus) the response return very slow and some query will not return at all (like get-owavirtualdirectory).
But If I using EMS on SP1. Everything is ok then I try to use EMS on SP1 connect to CU5 and try to query something. the result is
some query command cannot return for any result that are server on siteB (just some query command)
Problem
EMS on CU5 return very slow result.
EMS on SP1 still ok.
Does anyone face this problem before for CU5??? Please help me figure this out. Thank you
reply from Social.technet

Hi,
Have you used the above cmdlets to check your Exchange server health?
"all other command that I ran on EMS didn't logged on event viewer.", my environment is the same with you. I use Exchange 2013, only errors will be displayed in MSExchange Management. Actually, it is not related to slow EMS response.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Script to get the user details by running a view from powershell

Hi,
I have a use-case of getting the list of users, who got modified in last one week or so. There was no direct way of getting the results as office-365 doesn't have the option. As i posted in a forum they suggested to use view based for retrieving
the user details. I was able to get some user details through UI. When i asked for the option of getting it from powershell they suggested to post in this forum. Link on the question posted in forum is
community.office365.com/en-us/forums/148/p/212305/646170.aspx#646170 your help is appreciated. Thanks in Advance

Hi Sam,
My list of servers are exported from CMDB data base and filter criteria i have used is role,status and first few characters of the server name.
$CIlist = Import-Csv C:\Scripts\DiskSpace\Servers_CI.csv
$diskspace = @()
$CIlist | where {($_.Name -like '*XXXXXXXX*') -and ($_.Role -like '*XXXXXXXXXX*') -and ($_.Status -like '*XXXXXXXXXXXXXX*') } |
select Name | FT
# This part gives the list of servers.
# below script gives the hard disk details of servers from a list
$comp= Get-Content "C:\Scripts\DiskSpace\systems.txt"
$diskvalue = @()
foreach($pc in $comp)
if (test-connection -CN $pc -Count 1 -erroraction silentlycontinue)
    $diskvalue += Get-WmiObject -Class Win32_logicaldisk -ComputerName $pc -Filter DriveType=3 |
    Select SystemName , DeviceID , @{Name=”size(GB)”;Expression={“{0:N1}” -f($_.size/1gb)}}, @{Name=”freespace(GB)”;Expression={“{0:N1}” -f($_.freespace/1gb)}}
    $diskvalue | Export-Csv C:\Scripts\DiskSpace\DiskReport.csv -NoTypeInformation
else
"$pc `t offline" | Out-file C:\Scripts\DiskSpace\offlinesystems.csv -encoding ASCII -append
Is there any option to pass the result of first part to second part without exporting to a csv ot txt. or club this both together ??
ToJo

Lync Server 2013 : Export-CsArchivingData Can i get the files or name of files transferred between 2 users

I am using LyncServer 2013 And my Question is :-
Export-CsArchivingData -
By using this Command-let Can i get the files or name of files transferred between 2 users
Whether it is stored in "LcsLog" database ?
If not weather Lync server saves the files (which users are sending to another users ) anywhere on file system, or not ?

Doug Deitterick has a great blog posting that should answer your question: http://blogs.technet.com/b/dodeitte/archive/2013/04/24/archiving-options-in-lync-server-2013.aspx
The actual File is not archived in Lync, but the file name is and will be have either _p2P or _conf at the end of the name to indicate how it was transferred.
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

Export to exell-Exchange rate details

hi,
Is there any possibility that i can Export the exchange rate details in a excel report? (S_BCE_68000174 - Update Exchange Rate) or just let me know any other report or table that i get same information and export to excel
thanks
Gayani

Dear,
Yes use S_BCE_68000174 header menuTable view and Print. Then in next screen go to ListExport --spreadsheet.or press CRT + Shift + F7.
Regards,
R.Brahmankar

How To Get User Details in Collaboration ....?

HI,
In collaboration i am unable to see the full User Details (Like Mobile Phone Number, E-Mail Address, etc) ,When i was click on
user Names. Here i will get full User Details for some users and for some users i did not get(But getting only Last Name & User ID ) . Here we already having Data in User
Profiles.

Hi,
Maintain the user profile information for all the users in Identity management.
Regards,
kiruthika

How to get the user details

Hi All,
I want to fetch the user ID and email address, by using user details like first name, last name and user name.
Could you please suggest me which tables I can refer to get these data. And I tried to fetch it from the view V_USR_NAME,
But I could not able to get the data from the view by using select query. Please suggest me. Thank you

Hi Sriram
Thank you for your immediate response.. I have a gone through that thread and I noticed that in that case by using the email address we are getting the userID. But in my case I need to get both userID and email address by using first name and last name. I also tried to get the person number from ADRP table by using these fields (So that I can get the email address from ADR6 table by using the person number).. but the first name and last name are not the key fields..So got stucked there. Please suggest me how to proceed.
Thank you

How to get the User Details inoformation in portal?

I had defined the user informations in "Portal User Details". But i don't know how to get it and what the user table is?
for example: How to get the email address of user i have defined in portals?
Tank you very much!
Ghia Liu
Genesyslogic.com.tw

You would use the portal API's for this, there is one named wwsec_api.person_info that returns a record with the specified user's information, such as first name, lsat name, email, telephone, etc - a pretty long list. With release 2 of portal the data is no longer stored in the wwsec_person$ table as it was in release 1 so use the API (which actually is how I would normally do it in release 1 as well).
To get more documentation on portal API's go to: http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/plsql/doc/astart.htm
Hope that this helps you - enjoy the day!
Art

"User Details" don't get updated

Hi,
we have strange phenomenon that after editing user details like contact information etc. the User Details page in collaboration is not showing anything of the new data. Even an inkremental Index-Update has no effect on this - whereas in UME the new data is shown properly!
Can somebody give a hand on this issue?!
br

Hi,
You need to check first that the "Room Content Location" of the room.You need to modify the details of the user on the same node mentioned in "Room Content Location".If you modify the details in some other node it won't get reflected in the team room's contact information.
For eg:- If the "Room Content Location" for a particular team room is UK Portal node then we need to modify the user details from that node only.If we try to modify them from any other node the change won't get reflected.
Hope this helps.
Neha.

How do I get Portal Login User Details in WD Application

Hi,
Could you please help me out as how to get the user who has logged into the portal.
Regards,
Abilash.

Hi,
In you webdynpro location you can use the following code to get the logged in user details.
String strUserName = null;
try {
IWDClientUser wdClientUser = WDClientUser.getCurrentUser();
IUser sapUser = wdClientUser.getSAPUser();
if (sapUser != null) {
IUserAccount[] acct = sapUser.getUserAccounts();
if (acct[0] != null) {
strUserName = acct[0].getDisplayName();
} catch (WDUMException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (UMException e) {
// TODO Auto-generated catch block
e.printStackTrace();
The following import statements have to be used
import com.sap.security.api.IUser;
import com.sap.security.api.IUserAccount;
import com.sap.security.api.UMException;
import com.sap.tc.webdynpro.services.sal.um.api.IWDClientUser;
import com.sap.tc.webdynpro.services.sal.um.api.WDClientUser;
import com.sap.tc.webdynpro.services.sal.um.api.WDUMException;
Award points if helpful.
Regards,
Sujana

Exchange users get mime.822 on all mail from outside.

We have GW 7sp3, system with gwia, dom, and po. I just put in exchange 2003 and am using the gw to exchange sp2 connection. I have only one user who does pop and smtp into exchange. All of his emails incoming from the world get mime.822's on them and looks like attachments in outlook client 2007. Is that mime.822 something that the GW Gwia puts on there.
He does not get them when the mail does not pass through the gwia. Is there any way to get rid of these showing up as attachments?

Originally Posted by Brian
We have GW 7sp3, system with gwia, dom, and po. I just put in exchange 2003 and am using the gw to exchange sp2 connection. I have only one user who does pop and smtp into exchange. All of his emails incoming from the world get mime.822's on them and looks like attachments in outlook client 2007. Is that mime.822 something that the GW Gwia puts on there.
He does not get them when the mail does not pass through the gwia. Is there any way to get rid of these showing up as attachments?
It sounds like his mail is tunneled to Exchange via the GroupWise gateway from outside. What we have done to eliminate this annoyance for Exchange users is configure all Internet mail to hit Exchange first. Then if it is destined for GroupWise from the Internet, Exchange forwards it with SMTP to GroupWise GWIA (bypassing the Exchange Gateway).
To do this you need to create the forwarding from Exchange but also you need to remove the SMTP address policy from GroupWise contacts (leaving only the GWISE address in their Recipient policy on Exchange). GroupWise needs to handle all NDRs for both sides as well..
Ryan

Getting User Details using objectid

Hi,
First i am querying the projects using ALUI IDK
===========
IProjectManager projectManager = GetProjectManager(Request, Response);
IProjectFilter projectFilter = projectManager.CreateProjectFilter();
projectFilter.NameSearchText = searchText;
Plumtree.Remote.PRC.Collaboration.Project.IProject[] projects = projectManager.QueryProjects(projectFilter);
=================
then i am retreiving User IDsadded as Project Leader
========================
IRole role = null;
RoleTypes roleType = RoleTypes.Leader;
role = project.GetRole(roleType);
int[] GroupID = role.GetMemberIDs(MemberQueryTypes.AllGroups);
Display Group ID
=========================
Now the issue is i am not able to figure out how to get the users detail ie authusername, login name etc present in the groups that are retrieved.
Regards,
Ankit
Edited by: electrazy on Jul 18, 2011 11:39 AM
Edited by: electrazy on Jul 20, 2011 2:22 AM

Hello electrazy,
This is not possible from within the IDK. The best you can get are the Extended Data properties that are associated with the user object in the Global Property Map. If you want to get user information like the authentication name and the login name, you'll have to use the Portal Server API or directly query the database.
-Mike Headley, WCI Developer Support

Get Local user details (A Challenging question)

Hi All,
Is it possible to get the local user details such as user name, login time and logout time by passing ip address as input ? If so , Please let me know your inputs so that i can track all my users . I use Windows XP.
Thanks
Deepakkumar

DDK001 wrote:
I want to track , at wat time the user has logged in and logged out ?That part is well understood. Now tell us what the user is logging into or out of? An application you wrote? An operating system? Give more details.

How do I get the Manged bean and Taskflow logic for Disable button in User details Modify page

Hi,
I have a requirement where I have to add to custom buttons like "Terminate" and "Reinstate" in the users detail page. Terminate is closely modeled with "Disable" button of user details page. Before I develop the custom beans and register the task flow for the custom button, I just want to understand the logic written in the managed bean for "Disable" button and understand what is there in its associated task flow. Am trying to get these details from OIM. Not sure where exactly I can get the code for this and customize as per my requirement.
Please suggest the exact location?
Raghu

Thanks for the information - I still was hoping that the article Mario mentioned above was accessible (perhaps just moved)? Somewhere on the BC system? Just so I can add it to my BC help folder - as well as even share it with clients who want to try things on their own (best to give them some help in that direction so they don't fumble through things).
I have the checkout form populating information, if they have purchased in the past it will populate their address - but I am also trying to get their "account page" to do the same (basically show them what their current information in the system is - then allow them to update whatever might be wrong or need changes). We have a login page, for people to sign up without having "bought" something - so the CRM won't have their billing/shipping info in the system yet. Trying to capture that without a purchasing being made.

Exporting Exchange User Details (get command)

Similar Messages

Maybe you are looking for