Which is the better way to import videos into FCPX?

Hello to all. I have recently purchased an iPhone 5 and while importing videos, I could import them directly via the camera import of FCPX which was open at that time.
Later, when I tried to import a few stillshots, I found that I could not do it directly with FCPX importing into an event: reason being FCPX would not read the still photos. I learnt from the internet that one could import photos/videos from iPhone either through iPhoto or image capture. I tested out both of them and learnt that I could get my phoyos into FCPX via either of them.
My question is this: is it better for me to import videos into FCPX directly or to first save them on an external HD via image capture? Will there be any effect in the quality of the video in these two different methods of import?
Thanks in advance.

You have already pocketed my thanks in advance Tom! The early bird catches the worm! Awake so early? Have a great day.

Similar Messages

The best way to import video in Edge Animate project?

What is the best way to add video and audio in Edge ANimate project?
Thanks
Ares

Hi,
Can you check out the answers on this forum thread, and let us know if it helped you?
Can I import video into Edge? (http://forums.adobe.com/message/4352262)
Thanks,
Preran

Whats the best way to import video clips from FCP into a personal template

Hey all, I'm doing some tests. I see some color shifting going on when I export out of FCP using QT conversion (same settings as sequence), Importing into Motion, then adding lower third graphics, then exporting out of Motion .... and finally back to FCP. I put the new graphic added layer on top and have the original on bottom. I toggle the monitor on both layers and see a slight saturation drop on the graphic layer. Has anyone noticed that ?
The reason Im doing this is because lets say I have lower thirds that I want to place throughout a hour show. I want to set-up a basic lower third template and just plug in the video clips for the areas that I need those graphics. It would be way to difficult to export out of the timeline in FCP
and rebuild those lower thirds everytime in Motion. Does anyone know of a better way or does everyone have to export out to the desktop and then into Motion every time they want to use a Motion template.
Thanks to any replies.

Try roundtripping from FCP to Motion and back using Send to Motion. In FCP, Control Click your clip>Send To>Motion Project. The clip will open in Motion with the proper project properties. Make your edits there, press Save, and then render back in FCP. No exporting necessary, although you might see a gamma shift. Much easier.
To do this with an existing Motion template, I'd try copying and pasting in that template's contents once you've sent to Motion from FCP.

Which is the best way for creating video placeholders in AE?

I should create some video placeholder for AE animation, but I am not sure which is the best approach to do that.
I found some tutorials on the web where is explained how to create basic placeholders in AE, but I want to do something better.
Could I create some placeholder even in Photoshop? And after that to import this psd files into AE.
I saw some intersting placeholders on Videohive but I don't know how to create something similar?
Any help?
Regards!

Any layer may be replaced with new footage by simply selecting the layer you want to replace in the composition, then selecting the new footage in the project panel, then holding down the Alt/Option key and dragging the new footage to the composition.
If you want to automate the process of replacing footage you'll have to use a script.
If you want to use a project as a template then simply copy the template file in it's folder and paste it into a folder that contains the same structure as the template. IOW, the folders should look like this:
Template Project
     >template.aep
     >Footage
New project
     >copiedtemplate.aep
     >Footage
Your footage has to have the same filename as the original template project.
You can also save an AE project as a template (aet) project. That's what they are doing on siges like Video Hive. The template isn't easily overwritten so it maintains the work. Then you simply add your footage using the first technique that I talked about.

What is the correct way to import AVCHD into Final Cut Express?

The Final Cut Expres user manual (p. 221) says to import AVCHD footage with HDV Apple Intermediate Codec: "Important: Use the HDV - Apple Intermediate Codec Easy Setup for ingesting AVCHD footage."
But, Easy Setup has options for both HDV AIC AND AVCHD AIC. Why are there choices for AVCHD if the manual says to import AVCHD with HDV?

The manual is incorrect/human error/typo.
HDV and AVCHD do share the Apple Intermediate Codec as all this incoming footage will be converted to AIC so FCE can work with it on a frame by frame basis.
Call up the FCE>Easy Setups and look at the options.
You will notice 6 options (FCE 4.0.1) for 1080i with differing frame sizes and frame rates.
Only ONE of these is correct for the type of footage to be captured/ingested from the camera.
You need to know what the camera settings are, then output to FCE with an exact matching Easy Setup.
These days one camera can be set to different options making this decision one based on knowing how to operate the camera menu and select the right options.
When an FCE Easy Setup is changed only NEW Sequences will reflect the change not existing ones. In fact, in many cases, if the Easy Setup and incoming footage don't match it simply won't work causing the user to curse the Apple software.
First step is to select the correct Easy Setup then capture/ingest.
For AVCHD it will be an AVCHD - Apple Intermediate Codec........................
Example:
Camera has shot AVCHD 1920x1080i50
Easy Setup will be AVCHD - Apple Intermedaite Codec 1920x1080i50
The above example is for PAL interlaced, that's what i50 means.
NOTE: FCE will not work directly with p (progressive) footage so make sure your camera shoots i (interlaced).
Al

PAL - NTSC which is the better way ?

Hi
In need of a NTSC DVD disk to US I wonder which way that gives best result:
From original PAL miniDV -> FCP -> QT-PAL.mov -> JES Deinterlacer (conversion from PAL to NTSC) -> iDVD NTSC project
or
PAL miniDV -> FCP -> QT-NTSC.mov -> iDVD NTSC project
Last suggestion will be quicker - but will it give a good result ?
alt. suggestions ??
Yours learning Bengt W

Thank You
Yes it's to easy to go in old tracks - Compressor - Yes that's the way.
Yours Bengt W

What is the best way to import pictures from iPhoto without compression?

I'm trying to create a slide show using Final Cut Pro. No, I'm not interested in using iDVD slide show function because it doesn't allow me to do a whole lot. I would like to add titles and music for certain segments with video inserted here and there.
Anyway, when I used the slide show function in iPhoto, exported it out as a quick movie file, and then imported it into Final Cut Pro, I noticed a significant downgrade in quality of images. It obviously looks different from when I play the slide show in iPhoto. What would be the best way to import pictures into Final Cut Pro without any compression?
Thanks in advance.

I only see Share > Export.
Some versions of iPhoto work that way -it's just Apple moving things around.
what's the difference between exporting it from iPhoto then import it into FCP vs. just importing directly from FCP?
Your first post mentioned exporting a slide show from iPhoto -I assumed that is where your images are stored.
I do not want to import pictures one by one...
You don't have to. iPhoto will let you select as many as you want, or if the images are elsewhere, you can also select multiple files from FCP's Import dialog.
...and stick them together manually.
Editing is an art and involves some effort on your part. It is not an automated process. This method opens up far more possibilities, access to filters and color correction and the opportunity to use Motion for even more sophisticated animation.
But, it only allows me to export it as 720 x 480. The original size of my photos is 3872 x 2592. Is there any way I can create a quicktime file in the original size?
You should be aware that 3872 x 2592 is not a standard pixel aspect ratio that is used in video. The images will be resized to the Sequence settings that you set up in Final Cut Pro.
I have never used iPhoto to make a slideshow before, but I just gave it a try and was able to export one with the images in their native size, simply by typing the pixel dimensions into the boxes in the dialog window:
I don't have PhotoMagico myself, but it comes highly recommended by several of the forum regulars.
Perhaps one of them will see this discussion and help with your last question.

HT3290 RE Lumix Panasonic DMC ZS19 Can anyone tell me if you've found a way to import videos off the camera into iPhoto or iMovie? -Ellen

RE Lumix Panasonic DMC ZS19 Can anyone tell me if you've found a way to import videos off the camera into iPhoto or iMovie? -Ellen

Won't work shooting in 60P format. But will work fine in the others. I use the built in card reader in my Mac and it shows up fine in iMovie.
Hugh

Using the new iPad, what's the best way to watch video files (away from home) which are stored on a NAS (WD My Book Live)? Any help would be appreciated!

Using the new iPad, what’s the best way to watch video files (away from home) which are stored on a NAS (WD My Book Live)? Any help would be appreciated!

Before you go, move the files to I tunes and sync them down. There is no viable way to stream from your nas drive to the pad.

IMovie: whats the fastest way to import and save all original media?

Good afternoon. Ok I need help please. Is there a way to simply take all the imported original media and just save it all in one fell swoop? Rather than having to import and then process/export clip by clip.
I thought I had a quicker way just grabbing all the original media from the imported camera (right clicking imovie library > show package contents > original media) untill I tried to play one of the original media files - no sound and it was mov file. I assume mp4 is better???
I have 2800 hours of video I need to import off my camera. I don't need to modify them at all, aside from the occasional combining of clips into one movie. So I need the fastest way. Importing and then exporting clip by clip will take me forever. I would prefer to just import and then just drag all 50 clips or so into my movies folder. But as stated above that does not seem to work as expected unless I'm missing a step.
Thank you!

ps Can I take the original media files (mov format) and batch convert them using handbrake or MPEG streamclip? And if so would the resulting videos then have sound? And which is the best format (container codec whatever) to export them to? Thanks!

What is the easiest way to import my DVD collection in to iTunes 12?

Hi all,
I'd be grateful for advice on the best way to import my DVD collection - all legitimately purchased - in to my iTunes collection. I'm currently running iTunes 12 via a 2013 iMac running OS 10.9.4, on a home network including an Apple TV unit. There seems to be a lot of third party software options available, but I'm not sure which offer the best solution or, indeed, if Apple offers the ability to do this via iTunes itself.
Thanks for your help.
Rik101

Hi
Thanks for that. But do I have to us the external disc, moving it from PC to Mac or is there a better way?. Can you directly connect the systems. I assume wifi is too slow as the size is about 10G
Chris

How do I import DVD to IMovie? What is the best way to import DVD to a Mac?

Hi everyone!
I need some help, so here are my questions.
How do I import DVD to IMovie? What is the best way to import DVDs to a Mac?
I would like to keep the original quality from the DVD.
Thx.

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.

What is the best way to import a graphic? & How do I create a text frame for a figure caption?

Hello all! I've been working from the FM book for almost 2 hrs trying to figure this out, so now I need your help. I am almost to this point:
Problem I: Importing a graphic
First of all, which is the best way?
-Insert an anchor frame and then import the graphic into the frame OR
-Just insert the graphic and get the anchor frame by default
Here’s my importing and sizing problem:
I hit ENTER to make a new paragraph line (side note: the book says make a new paragraph by hitting ENTER, import the graphic, and then ESC m+p to shrink wrap so that you can avoid the graphic overlapping the above text. I do exactly this (I believe), but my graphic still overlaps the above text when I shrink wrap. What the...?)
I insert an anchored frame with position Below Current Line and alignment CENTER (I chose to the insert anchor frame, since this way I have control over its alignment, correct?)
Anchor frame is selected when I import my image file
In the Imported Graphic Scaling box, what do I select if my file is HUGE (3072x2304)?
-Fit in selected rectangle (when I choose this the image imports small and fits in the anchored frame with lots of white space around it)
-72 dpi
-75 dpi
-150 dpi
-300 dpi
-Custom dpi: 96 (I’ve tried changing this to a smaller number (20) and I get a message that says “cannot handle a bitmap of that size.”)
I’ve had the best luck with selecting FIT IN SELECTED RECTANGLE, and then I just scale the image with my shift+click. If I choose 72 dpi or Custom, my image imports HUGE, and I just can’t manage it. I don’t have a method for resizing these images outside of FM.
Problem II: Creating a text frame for a caption
Once I have chosen FIT IN SELECTED RECTANGLE, I try to insert a text box underneath the image (and inside the anchor frame) to type a caption in it.
In Create New Text Frame box, the default is Number 1 and Gap 0.25. I click SET.
Next, I double-click inside the text frame to begin typing, but the cursor is OUTSIDE and UNDERNEATH the text frame! What the heck??? I’ve done this before and it has worked just fine. Then I had another problem where when I did get the text inside the text frame, I would select the text frame to move it, and it left the text behind! (I moved the frame but the text was separated from it and left behind.)
THANK YOU in advance for your help. I hope I wrote this out clearly enough. I appreciate those who respond. P.S. I'm in FM 10.

My favorite method is to use a one-cell table for graphics and captions.
Import the graphic by reference into the table cell. Create a "Caption"
paragraph tag and assign it to the table title. (The title can be set
for above or below the table cell. I prefer below.) Now, whenever you
insert this table, it will be ready for graphic and caption. Another
advantage of this method is that graphic and caption always stay
together at page/column breaks.
When you create the table format above, assign it to have a -2.0 space
above. Then, create a paragraph tag, such as "TableAnchor" and assign it
-2.0 pt font size and -2.0 space below. (You can substitute a different
point size, but it must be the same in all three places. The TableAnchor
paragraph will hold the table and these settings let tables fit against
the top margin where necessary. Otherwise, they dip down a bit.
I wrote this from memory, so I hope I remembered all the steps!

Is there a way to import videos from old VHS tapes so that they can be later accessible to processing with imovie?

Is there any way to import videos from old VHS tapes so that thry can later be processed by imovie?

I recently got a new iPhone, and after restoring all my stuff from my old iPhone via the iTunes restore thing, I had to put all my music on manually, instead of it being restored.
iTunes content is not included with your iPhone's backup - no music, movies, tv shows, podcasts, audio and print books, tones, and apps. All iTunes content must be transferred back to your iPhone when restoring. If you sync music with Sync Music selected under the Music tab for your iPhone sync preferences with iTunes, music is transferred back to your iPhone from your iTunes library when syncing - syncing is followed after the iPhone is restored. If you manually manage music and videos with this selected under the Summary tab for your iPhone sync preferences with iTunes, you must manually drag all music from your iTunes library back to your iPhone. Manually manage music means manually all the way.

What is the best way to import pictures from Lightroom 5 into FCP X

What is the best way to transfer pictures from Lightroom 5 into Final Cut Pro X?

There is no one best way. If, for instance, you want to be able to zoom into the picture with a Ken Burns effect then you may want to save out a very high res version that will be larger than your video resolution. Just use Lightroom to export a jpg file wherever you want it. You could export it into the Events folder and then choose not to copy it when you import it within FCPx. You could import the picture into iPhoto and then access it directly from within FCPx. Those are two simple, "regular" ways to get it into FCPx but if you are not going to Ken Burns the image by zooming into it and such you will want to crop it in Lightroom to the same size you will be using ie if you are making 720HD video then crop the image to that size and proportion before you export it from Lightroom.

Which is the better way to import videos into FCPX?

Similar Messages

Maybe you are looking for