Which layout manager can do this?

Heya folks.
I've been developing a piece of software and laid out the UI by hand (not using any NetBeans or whatever).
What i have issue with now is setting 3x JTextFields to 33% of the frame's width. Im using GridBagLayout with constraints and cannot achieve that effect.
Here is the example of what im trying to achieve (and yes its photoshoped, well....actually "MSpaint"ed :P )
http://i51.tinypic.com/2u7osvb.png
I want to have a JLabel over each JTextField too.

Kleopatra wrote:
Darryl Burke wrote:
I would nest panels with different layouts to achieve the same result more easily.nesting is for nerds <g> Or slaves, being bound to core LayoutManagers. Or people that post to these forums and expect answers that start with anything other than "Go ask the 3rd party developer..".
As a side note. Not that I am doubting the power of the LMs you outlined. To read Karsten's* (JGoodies) posts on public forums indicates he has a far better grasp of easy & fluid layout management than is incorporated in many of the core layouts.
* Disclaimer: I was granted a free license to use JGoodies PLAFs and layouts - though I have been very slack in not using it to full advantage.

Similar Messages

HT4623 ios 6 and want to down grade to ios5 kindly confirm which methods i can do this

ios 6 and want to down grade to ios5 kindly confirm which methods i can do this
thank you in advance for your assistance,I look forward to your prompt response

I am unable to to make or receive calls althought i reset the phone as well as the network setting.In addition to the above i contacted vodaphone and they mentioned everything is fine with the sim card.Any other suggestions???

Which Layout Manager allows this

hi i have a JPanel with the size of 300w 300h, this JPanel is inside a horizontal split pane. I need to add a JTable inside the JPanel at coordinates x = 350 and y = 20; which means it is placed hidden inside the JPanel because the size of JPanel is smaller. how do i do this? it wont let me.
The idea is that when i move the split pane it will show the table. thanks very much

Thanks for the reply, i did that but nothing appeared
in my panel. Did i miss setting up anything.
Thanks again.I think that the width, height, x, and y of the component default to 0, which is why you can not see the component. To set them use:
component.setBounds(x, y, width, height);

From which table i can get Customer No, Cust Ref, Contact name

Hi CRM Experts,
I want some fields ie (Customer Number, Customer Reference, Contact Name, Account Manager) from which table i can get this fields according to the Object_id.
Provide any Tables names or Functional Module

Hello Santu,
To get this info in the Sales order, following steps ways you can go:
1. Get Sales Order header GUID from table CRMD_ORDERADM_H, as you have OBJECT_ID.
2. Get the Sales order details by passing Header GUID to FM CRM_ORDER_READ and the exporting parameter table ET_PARTNER will give the parnter details of the Sales order. Read this ET_PARTNER table with partner function 0000001 i.e. sold to party which is customer number and check the ET_SALES Table where in PO_NUMBER_SOLD field will be refering to customer ref may be item level or header level depends on business,
3. regarding the Contact name..check what is business requirement whether end customer contact or contact person of the customer.
Hope it will help,
Regards,
Arjun
<b>Reward points if it helps,</b>

A device which is not part of this management group has attempted to access this Health Service.

Has anyone found an answer to this yet? I have uninstalled/reinstalled the agents both manually and through the push. Rebooted the client, rebooted the sce server. Forced the group policy to reapply, forced the health agent to /reportnow and I still get the error. The client shows up under the agent managed section but under the health state column it shows not monitored. The clients can ping the SCE server by FQDN and RDP to it as well so name resolution is working fine.
On the the SCE server I get this in the log
Event Type: Information
Event Source: OpsMgr Connector
Event Category: None
Event ID: 20000
Date:  6/25/2009
Time:  10:09:40 AM
User:  N/A
Computer: *******
Description:
A device which is not part of this management group has attempted to access this Health Service.
Requesting Device Name : *****
And this
Event Type:            Information
Event Source:           OpsMgr Connector
Event Category:       None
Event ID: 21042
Date:                        6/25/2009
Time:                       10:25:14 AM
User:                        N/A
Computer:                ***********
Description:
Operations Manager has discarded 1 items in management group Servername_MG, which came from $$ROOT$$. These items have been discarded because no valid route exists at this time. This can happen when new devices are added to the topology but the complete topology has not been distributed yet. The discarded items will be regenerated.
On the client I get
Event Type: Error
Event Source: OpsMgr Connector
Event Category: None
Event ID: 20070
Date:  06/25/2009
Time:  10:06:13 AM
User:  N/A
Computer: ******
Description:
The OpsMgr Connector connected to ****** but the connection was closed immediately after authentication occured. The most likely cause of this error is that the agent is not authorized to communicate with the server, or the server has not received configuration. Check the event log on the server for the presence of 20000 events, indicating that agents which are not approved are attempting to connect.
And this as well
Event Type:            Error
Event Source:           OpsMgr Connector
Event Category:       None
Event ID: 21016
Date:                        06/25/2009
Time:                       10:06:18 AM
User:                        N/A
Computer:                ******
Description:
OpsMgr was unable to set up a communications channel to **** and there are no failover hosts. Communication will resume when ******* is both available and allows communication from this computer.
And this
OpsMgr has no configuration for management group Servername_MG and is requesting new configuration from the Configuration Service.

Hey Nathan,
Yea I have sent the script to eveyone that has aked for it. I dont know if its helped anybody else as none has given me any feedback either way.
I guess I can post it here for everyone to use.
Please keep in mind that if you use this script from MS its at your own risk, If your DB blows up, massive catastrophic failure ensues and so forth ITS YOUR OWN FAULT. MAKE SURE YOU HAVE GOOD BACKUPS
Step 1) Run this against your SCE 2007 DB
DECLARE @BaseManagedEntityInternalId int
DECLARE @BaseManagedEntityId uniqueidentifier
DECLARE @ViewName sysname
DECLARE @Statement nvarchar(max)
SET @BaseManagedEntityInternalId = 0
WHILE EXISTS (SELECT * FROM BaseManagedEntity WHERE (BaseManagedEntityInternalId >
@BaseManagedEntityInternalId))
BEGIN
SELECT TOP 1
@BaseManagedEntityInternalId = bme.BaseManagedEntityInternalId
,@BaseManagedEntityId = bme.BaseManagedEntityId
,@ViewName = met.ManagedTypeViewName
FROM BaseManagedEntity bme
JOIN ManagedType met ON (bme.BaseManagedTypeId = met.ManagedTypeId)
WHERE (bme.BaseManagedEntityInternalId > @BaseManagedEntityInternalId)
AND (bme.IsDeleted = 0)
ORDER BY BaseManagedEntityInternalId
SELECT @Statement = 'IF NOT EXISTS (SELECT * FROM ' + QUOTENAME(@ViewName) + '
WHERE BaseManagedEntityId = ''' + CAST(@BaseManagedEntityId AS varchar(50)) + ''')
PRINT ''' + CAST(@BaseManagedEntityId AS varchar(50)) + ' ' + @ViewName + ''''
EXECUTE(@Statement)
END
STEP 2)
If your problem was the same a mine you should get some GUID’s returned. (For example 93790c0B-09C4-3A4D-CE72-F4E3Dd917D78 MTV_DeploymentSettings)
Using the GUID that we got in the output file
Execute the below given query:
==========================
select fullname
from basemanagedentity
where basemanagedentityid = ‘<GUID>’
==========================
Verify that the device or the object mentioned in the above output is not displayed in Operations console.
Only in case if the object is not displayed then use the below given query to delete it from database.
==========================
update basemanagedentity
set isdeleted = 1
where basemanagedentityid = ‘<GUID>’
==========================
Before executing the above query please ensure that you have the backup of the database. Also note that you need to run the above said query only incase if you do not see the object in the Operations console.
After executing this query, run this stored procedure:
==========================
exec p_Detectandfixinstancespaceinconsistencies
==========================
Once it is done:
> Stop all the three OpsMgr services: health, Config and SDK on Management Server
> Cleared the health service state folder.
> Start all the three OpsMgr services: SDK, Config, and health on Management Server.
> Wait for 30 minutes and see if the agents start getting monitored.
I hope this helps everyone

Often, Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted.

Hello,
Often, the Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted. This happens especially when many apps are running but even though there are plenty of memory resources available.
I have tried to find if something is using Firefox in the background, but have no way to know what that would be.
Their are no apparent viruses detected.
Firefox is version v5.0 and occurred in earlier release.
System is Windows 7 (64bit).

well, it's not the same hardware and it's a bit different.
I managed to pass that stage somehow but I still have a problem
I don't use the built-in creator tool that comes with Spyrus as it doesn't know how to append a pre-staged media that was created by SCCM that should apply the Windows file system to a second partition and the WinPE to the first partition.
I managed to do everything. my only problem is that the WTGCreator that comes with SCCM 2012 R2 creates the 350MB partition with FAT32 file system.
when I boot from the device I get the WinPE, I can choose a task sequence and then it fails when trying to apply the wim file. the error tells me that the 350MB partition is FAT32 which is not supported (even though it chooses the second partition, which
is all the rest of the disk space)
what I did was adding another task that converts the 32 Fat partition to an NTFS partition and then the process continues and finishes successfully! but that's a workaround.
I'm trying to make this process as smooth as possible without having additional steps
Tamir Levy

How can i find the file to which Session Manager has saved my session ?

How can I find the file to which Session Manager has saved my session ?
== This happened ==
Every time Firefox opened
== User Agent ==
Opera/9.80 (Windows NT 6.0; U; en) Presto/2.5.24 Version/10.53

From
http://support.apple.com/en-us/HT4946
Where your backups are stored
The folder where your backup data is stored depends on your computer's operating system. Make sure the backup folder is included in your data-backup routine. iTunes places the backup files in these places:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    The "~" represents your Home folder. If you don't see Library in your Home folder, hold Option and click the Go menu.
    Windows Vista, Windows 7, and Windows 8: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    To quickly access the AppData folder, click Start. In the search bar, type %appdata%, then press Return.
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    To quickly access the Application Data folder, click Start, then choose Run. In the search bar, type %appdata%, then click OK.
See here for how to backup
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support

How can I determine which Layout Designer documents go with a business part

How can I determine which Layout Designer documents go with a business parter? I need to be able to query the database and make sure the right business partners are assigned to the right Layout Designer documents without going into the Layout Designer.
TJA

Hi,
You may check this thread:
Print Layouts related to Business Partners
Thanks,
Gordon

My drive recently had to be replaced with a new one installed by Apple they reinstalled all my stuff from my time machine. Most my programs had to be updated which I managed with a little help from my friends, but the last one that I can't solve is

My IMAC OSX 10.6.8 2.8 GHz intelcore 2Duo 4GB 800 Mhz DDR2 SDRam recently had to have its hard drive replaced by apple thy actually had to give me a larger one because mine was no longer available,They also reinstalled all my programs and data from my 2 terrabite time machine back up. I got my system home and found that I had to upgrade most of my programs which I managed with a little help from my friends, but I still have one problem that I can't solve I have a Nikon Coolpix S6 that I have Been Syncing with my Iphoto since I've got it 3 years ago and now when I place it in the cradle the program reconizes it and says that it is going to start to import the new photos the little white wheel in the center of the screen starts spinning but nothing else happens. I checked all my connections and they are goog plus I even downloaded a nikon progam just to double check the camera & cradle and it works there but it wont pair off with my IPhoto.

First go to iPhoto Preferences, look in both General and Advanced tabs to make sure that things are set to import from camera into iPhoto.
Then if that doesn't help, connect the camera and open Image Capture in your Applications > Utilities folder and see if you can use Image Capture to reset the import path from the camera to iPhoto.
Image Capture: Free import tool on Mac OS X - Macgasm
Message was edited by: den.thed
Sorry John, I didn't see your post when I clicked the reply button. Dennis

ITunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

I have my iTunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

You can't connect directly to the external drive, but should be able to use iTunes Home Sharing via the laptop.
http://support.apple.com/kb/PH1453

HT4847 How i take an old back form my old iphone to my new iphone?!when i acces icloud from my phone and go to manage storage i have 4 back up for diferent phone how can acces this data?!

How i take an old back form my old iphone to my new iphone?!when i acces icloud from my phone and go to manage storage i have 4 back up for diferent phone how can acces this data?!

Thanks very much!
Although I had to add everything again to the playlist, at least I can just copy it over in future!

I got new iphone and when i connect it to my pc, it lost all my current data and replaced it with the backup on my computer, which is from april. so i have lost all my calendar information and schedule. does anyone know how i can reverse this?

i got new iphone and when i connect it to my pc, it lost all my current data and replaced it with the backup on my computer, which is from april. so i have lost all my calendar information and schedule. does anyone know how i can reverse this and get my information back?

Every backup replaces the old one, so, unless you included the backup folder in your computer backup routine, you can't get back your calendar info.
The only time iTunes will not replace a backup is, when you use it to restore from, this one will stay in the backup list in iTunes.
More info on backups here: http://support.apple.com/kb/HT1766

When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute. The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?

When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute. The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?

Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time.

HT4994 HAI CAN YOU TELL ME WHICH SIM IS USED IN THIS IMEI **** AND WHICH COUNTRY

HAI CAN YOU TELL ME WHICH SIM IS USED IN THIS IMEI **** AND WHICH COUNTRY
<Edited By Host>

No. Sorry, no one here can help you.
The only reliable way to determine this info is to call AppleCare.

While updating iphone, itune gave me error of 1015 which tells that my iphone is much better than from which that i am updating. But now my iphone is still in restoring mode how i can resolve this problem.please tell me

while updating iphone, itune gave me error of 1015 which tells that my iphone is much better than from which that i am updating. But now my iphone is still in restoring mode how i can resolve this problem.please tell me

I just had the same problem with my iphone, only thing i could do was completely restore factory settings, lost a bunch of pics and contacts in the process... hope you have better luck than me

Which layout manager can do this?

Similar Messages

Maybe you are looking for