Which Microsoft2013 product is support for Power Query

Hi All,
I'm using window 8.1 Pro and want to install Power Query on my PC. Could you please let me know which Microsoft Product dose support Power Query for Window 8.1 Pro?
Many thanks

Similar Messages

Sharepoint 2013 support for power query

Hi,
I wanted to know whether SharePoint 2013 supports power query and can we refresh power query data from excel services.
Thanks,
Bhawna.

Hi Bhawna.,
According to your description, my understanding is that you want to know whether SharePoint 2013 support Power Query and refresh power query data from excel services.
The refresh of workbooks involving Power Query queries isn't currently available in SharePoint 2013.
Here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/62b6384e-3120-40e2-9469-01c808530f55/does-sharepoint-2013-have-power-query-services-similar-to-power-pivot-and-power-view?forum=powerquery
http://social.technet.microsoft.com/Forums/en-US/2da77984-5a97-4102-9119-97ecbc39f527/publish-power-query-workbook-to-sharepoint-2010?forum=powerquery
In addition, I am not an expert for Power Query, you can create a new thread on the Power Query forum, more experts will assist you with this issue.
Power Query forum:
http://social.technet.microsoft.com/Forums/en-US/home?forum=powerquery
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Which antivirus product is recommended for the iMac?

Which antivirus product is recommended for the iMac?

OS X already includes everything it needs to protect itself from viruses and malware. Keep it updated with software updates from Apple.
A much better question is "how should I protect my Mac":
Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Disable Java in Safari > Preferences > Security.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

HT5815 im searching a for a update there makes it possible for mac computer with OS X To play games there aren't Supported for power pc, Like Warcraft 3, Diablo 2 and those kind of old games there worked on the previous versions of the OS

im searching a for a update there makes it possible for mac computer with OS X To play games there aren't Supported for power pc, Like Warcraft 3, Diablo 2 and those kind of old games there worked on the previous versions of the OS

Here is a thread for you: Is there any possible way to run PPC...: Apple Support Communities

How to disable update notifications for Power Query?

Is there a way to disable the notification of available updates for Power Query? Command line switch on install, anything?
Thanks!

it was included in the Power Query version released in September 2014. HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Microsoft Power Query for Excel DisableUpdateNotification dword 1 will disable the update notification.
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or MVPs.
Twitter:
@alexverboon | Blog: Anything About IT

Which frame works will support for blackberry application developement.

Hi
Which frame works will support for blackberry application developement?
Thanks
Achyut

hello,
I think you'll have much more answers if you post in one of the three discussion boards "Blackberry Development" :
http://supportforums.blackberry.com/rim?category.id=BlackBerryDevelopment
Anyways, RIM has a website for people who want to start developing, it's here :
http://na.blackberry.com/eng/developers/started/
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Flashplayer no longer supported for power pc? can't see any videos

can not download flashplayer to see videos When I do it says devis with power pc processors are no longer supported. Any one else having this issue?

The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
You can check here what version of Flash player you actually have installed: http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version, 10.2.152.25, 10.3.x beta, or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Version 11.0.1.152 is for Lion.
* Unhelpfully, if you want the last version for PPC Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. The first one on the list, Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

Which blutooth device is support for lumia 920

hi
i am using Nokia Lumia 920. Now i am going to buy bluetooth headset. But all bluetooth device not supported in Lumia 920. So Please suggest me which bluetooth device is better for Lumia 920. And music should like a DJ Bass
Thanks
Moderator's note: The post was moved to the most appropriate board.
pravindra.seo

Hi, pravindraseo. Welcome to Microsoft Mobile Community! We can't provide you a specific model of a Bluetooth headset that will work with your phone. However, you may try checking this to see the compatible accessories for the Lumia 920: http://www.microsoft.com/en-us/mobile/accessories/all/?action=accessorysearch&product=4136540. The link is intended for the US, but you may refer to this link http://www.microsoft.com/en/mobile/support/locations/ to go to your local support page. Keep us posted if you need more help.

Which NI product is suitable for me?

Hello All!
I want to have an RF tuning time <= 10 us for both Transmission and reception. Which NI product can be suitable for me if i want a setup like HOST (host.vi) --> FPGA(fpga.vi) --> DAC --> RF board (RF oscillators etc) ? Is any of NI RF board have AGC implemented it or not?

Hi,
I would take a look at our Vector Signal Transceiver. The link below will bring you to the product page for it.
http://sine.ni.com/nips/cds/view/p/lang/en/nid/210629
Carl W.
Applications Engineering
National Instruments

Adobe CS6 Windows Production Premium Support for NVidia K5000 Video Card?

When will Windows version of Adobe CS6 Production Premium support the new NVidia Quadro K5000 Video card?
We currently so not have GPU Acceleration.
Help!!!!

NTVWEBAdmin wrote:
Hopefully soon. How will we know when it is?
I wish I could tell you....
I work for Adobe, so I can't.
Thanks for your feature request!

Which JDK is JSF supported for?

Is JSF Supported for JDK 1.3.1_03?

I think it's more of a J2EE SDK support issue and I think (but am not sure) you need J2EE1.4.
You may want to try this question on the Sun Java Studio Creator forum:
http://swforum.sun.com/jive/forum.jspa?forumID=123
Probably not the most appropriate forum, but more correct than this forum which is focused on the Sun Web Application Framework (JATO).
craig

I want to scan typed documents to Word for Mac and change them. Which Adobe product is best for this? This is not my area of expertise. Thank you.

Can someone tell me which Adobe product to use? I'm compiling a manuscript of poems and short stories for a friend, which are typed and handwritten and I need to edit them. Thank you.

Scanning to Word won't do what you want.
You see, a scan of a page is just like a photograph of it. You have photos of letters and stuff, but no actual letters. There is a special process called "optical character recognition" (OCR) which analyses the picture in detail, and decides - hey that pattern of dots looks like it might be a letter A - and that would could be an S... it is difficult and time consuming but if the original is clear then you can get a lot of text text with the need only for careful proof reading.
Check the software which came with the scanner first. It may well offer options for OCR. Yes, Adobe Acrobat Pro can do this, but you have unnecessary complication, because you'll then need to get the text out from Acrobat to begin the tedious process of typesetting each page. To be honest, you might find retyping everything the quickest and most reliable approach. If you aren't already experienced in dealing with long documents in Word you are in for a long haul. Back up a lot, so you don't lose everything due to a mistake.
(I'm assuming you don't want a "facsimile" - a warts-and-all exact copy of each original page, as typed and scribbled, with no changes at all - that would be a different story).

Need support for tuning query

Hello people,
I have a complex question.
Imagine a supermarket where all sold products are written in a database. The sources are three cash registers. The database will continue filled with new data. I will:
- From a certain product (for example, "JAM", this product is part of a table 'products' in which these specific products are named) the data request which is received in a 30 second after the insertime product 'JAM'.
- The above action I break per cash register (cash_1, Cash_2, Cash_3).
- I want to select all products in all three subqueries occur.
As far as I have:
Select *
From db
Where product in (Select * from db where insertdate between (Select insertdate from db where product = ‘JAM’ and source = ‘Cash_1’) and ((Select insertdate from db where product = ‘JAM’ and source = ‘Cash_1’)-(sysdate-0.000347)))
and product in (Select * from db where insertdate between (Select insertdate from db where product = ‘JAM’ and source = ‘Cash_2’) and ((Select insertdate from db where product = ‘JAM’ and source = ‘Cash_2’)-(sysdate-0.000347)))
And product in (Select * from db where insertdate between (Select insertdate from db where product = ‘JAM’ and source = ‘Cash_3’) and ((Select insertdate from db where product = ‘JAM’ and source = ‘Cash_3’)-(sysdate-0.000347)))
Who can help me? I suppose that this query will very tuff for the server. Are there any ways to tune this query up? I like to hear from you.
Aldert
Edited by: user11315153 on 30-jun-2009 0:51

As far as I can see the query is
SELECT *
FROM db
WHERE product IN
             (SELECT *
                FROM db
               WHERE insertdate BETWEEN (SELECT insertdate
                                           FROM db
                                          WHERE product = 'JAM'
                                                AND source = 'Cash_1')
                                    AND ( (SELECT insertdate
                                              FROM db
                                             WHERE product = 'JAM'
                                                   AND source = 'Cash_1')
                                          - (SYSDATE
                                             - 0.000347)))
       AND product IN
                (SELECT *
                   FROM db
                  WHERE insertdate BETWEEN (SELECT insertdate
                                              FROM db
                                             WHERE product = 'JAM'
                                                   AND source = 'Cash_2')
                                       AND ( (SELECT insertdate
                                                 FROM db
                                                WHERE product = 'JAM'
                                                      AND source = 'Cash_2')
                                             - (SYSDATE
                                                - 0.000347)))
       AND product IN
                (SELECT *
                   FROM db
                  WHERE insertdate BETWEEN (SELECT insertdate
                                              FROM db
                                             WHERE product = 'JAM'
                                                   AND source = 'Cash_3')
                                       AND ( (SELECT insertdate
                                                 FROM db
                                                WHERE product = 'JAM'
                                                      AND source = 'Cash_3')
                                             - (SYSDATE
                                                - 0.000347)))which would probably suffer from a »ORA-00913: too many values«, because you can't do »..where product in (select * from ....)« (if db has more than one column).
It would be better to provide table structures - db version - and to formulate what you actually want to achieve.

Upgrading to Mountain Lion and lack of support for Power PC Applications

Hi
I have been reading with interest the comments and questions about this.
I am a bit of a novice with pc/mac terminology so was baffled to receive the message about Power PC Applications. I merely upgraded to Lion thinking it would be great to have the latest software on my Mac but am now unable to log into work remotely.
I log in using "Cryptocard" software and tokens. Does anyone have any experience of getting around the power pc application issue using the Cryptocard software? I an hoping I wont need to revert back to the previous software after spending £13 upgrading it!
Have contacted Cryptocard for support but comments are welcome
Many thanks

I have no experience with Cryptocards, but,
Workarounds:
1. Revert to the original OS X that was operating on your Mac;
2. Upgrade your PowerPC applications to Intel versions;
3. Replace your software with alternatives that work in Lion;
4. Partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" system to run your PPC applications but not concurrently with Lion; or
5. Do what I do, install Snow Leopard (with Rosetta) into Parallels in Lion:
[click on image to enlarge]
Full Snow Leopard installation instructions are here:
http://forums.macrumors.com/showthread.php?t=1365439

Which one should we go for Named Query or Redirect Query???

Hi all,
We are in the process of implementing top-links in our project so we are working with different queries of top-links. We have made most of them many of the queries are clear in their concept and implementation. It was a very nice experience working for now. but i have some un-answered questions like
---- what is the difference between Redirect query and Named query (Both seems to be the same... to me). we got output using Redirect query but i am totally confused because in documentation it gave that redirect query is used in situation where query is complex and named query cannot be used for it.But i personally feel some things about redirect query .....
-- Query implementation is itself complex and confusing .
-- What operations can we do in the static method where we are redirecting the query.
-- Almost of all the methods in the 'ClassDescriptor ' are deprecated...
-- Not Much Implementation code is available in Top-link docs nor On-line.
That's why i am not able to decide which query i must use for a complex query i would prefer named query from myself because of its simplicity and straight forwardness.
Can any one clear my questions.....
Many questions in days to come........
Thanks in Advance
Adil

no reply ..... :-)

Which Microsoft2013 product is support for Power Query

Similar Messages

Maybe you are looking for