Which module/datasource uses ROCANCEL field?

Hello SDN,
Any idea on this one? I remember that this field in the datasource can be flagged as in-use or not in-use but not sure which module or datasource uses it or can use it. Any general guidelines? I remember it is to do with the behaviour of certain datasources. I am trying to brush up.
Thanks.
Adette

Please check the link below
http://help.sap.com/saphelp_erp2005vp/helpdata/en/b7/413f3f2615e07fe10000000a114084/frameset.htm

Similar Messages

Fox Code:Inclusion of field which cant be used as field to be changed or in conditions

Hi Folks,
I have a field and value for that field is made by user selection.
Now, i want to include that field in filter used by the planning function.
But my question is could i include that field directly in filter using the same variable thats used in input layout and modifying the fox code by passing value to the field by this statement:
Let the field added be X.
X = VARC(VARIABLE NAME).
Kindly advice.
Thanks

Hi Kitu,
the code on how to read variable values in fox is different than what you stated.
you need to define first a local variable
data local type xxx. (local is an individual name, xxx is the info object name)
then you need to fill the local variable with the value from your bex variable.
local = varv (yyy). (yyy is the technical name of your bex variable).
regards
Cornelia

Testing Function Module before using in DataSource?

Hi Experts,
After writing a Function module for Transaction DataSouce (by copying RSAX_BIW_GET_DATA_SIMPLE), is there any way to test the Function Module before using in Transaction DataSource? (to see how many records it retrieves).
Also can somebody please throw some light in understanding the source code of RSAX_BIW_GET_DATA_SIMPLE function module, as it has many declarations like E_T_DATA,
I_T_SELECT which will be used in the new function module?
Looks like, the function module RSAX_BIW_GET_DATA_SIMPLE uses only one table SPFLI.
If it is just one table why do we need to write function module to extract data?
Forgive me for my lack of ABAP knowledge.
Thank you,
Lakshmi

The generic function moduel is used when there is no BW extractor and you cannot get to the data via a view or table
The extractor is quite simple
You create a extract strcuture of data to send to BW
Then you create the function module - e_t_data takes on the extract structure
The select options read data via the infopackage selection from BW (and thus when you create your datasource you shoudl click the fields to be select option)
So in the ABAP
You read the select option and put them into a range
You select from which ever tables you need to in R3 and put into an itab
You then loop aroudn the itab and manipulate the data or read other tables
The data finally ends up in e_t_data
The whole thing gets looped around based on the size of the data package - ie if it is 10000 records then the fetch next cursor after 10000 records will send the package of e_t_data out to the refc scheduler and down the line to BW - then the fetch next cursor will get the next 10000 records for the next
I use this all the tiem (so sorry for the brain dump)
I especially use it for virtual cubes - ie to get real time data from R3 from within BW - the data is not requested by ipak but by the query at runtime against a Virtual cube which connects to this generic extractor
Note: this generic extractor can also live on the BW side - ie you can use it instead of APD to snapshot cube or DSO data to send as an ipak into another cube

Which Function Module is used for converting the DATE in BDC

HI,
Which Function Module is used for converting the DATE Format in BDC for Uploading purpose please help me.

data : date like sy-datum.
data : odate(10) type c.
date = sy-datum.        " in format YYYYMMDD
CALL FUNCTION 'CONVERSION_EXIT_PDATE_OUTPUT'
EXPORTING
   input         = date
IMPORTING
   OUTPUT        = odate         .
write:/ odate. "in ur format '.
1.
In ur itab make a field for date as 10 characters and use this Fm to store the date .
2. Pass the date as the charcter field to the screen and now check .

Generating a Generic DataSource using Function Modules

I am attempting to create a generic DataSource using a function module. All of our DataSources are business content or custom generated that involve views. At least in our company this is true. Is there any resources available to me with examples on how to do this. I have looked at SAP's 'simple example' and would need a ABAP/BW Guru to figure it out! Any help would be greatfull. Thanx. JJ

Hi Jerry,
The simple example should provide you with the necessary requisite. All what you need to do is to
create your own extract structure and assign that as type for the table parameter e_t_data.
Now you will get the selection criteria, as well as the fields selected in the datasource from the 2 incoming tables. You need to write the necessary abap code to execute a query and populate your extract struture.
Once important peculiarity of this function module is that it is called several times, or as many times as the MAX parameter + 1. ie, once for each row fetched. Hence you will find a persistence method of using a CURSOR with HOLD property to retain the data between the function calls.
The help in generic datasource explains the 3 modes,
initialize, first call and the repeat call for the
function module. The simple function module example actually provides the necessary logic to deal with these modes and the example uses the sflight table.
Hope that is some information that could help u begin with.
Anoop C M

Using Proposed Fields - Flat File to DataSource rather than InfoObjects

Hi Experts,
We are doing one test project in which our source data is Flat Files. We want to load into DSO and InfoCube. Then our next step will be MultiProvider and produce reports on MultiProvider. Can you please clarify?
From Flat File to DataSource(PSA) we are using Proposed Fields rather than InfoObjects to Transfer Data.
From DataSource to InfoProvider we are using InfoObjects to Transfer Data.
My question to you is, is it correct to use Proposed Fields rather than InfoObjects from Flat File to DataSource Transfer?
Thank you,
Srini.

Hi, check in Proposal tab, you need to check if the field
types and lengths are correct (If they match the file you have or will receive).In some cases, the proposal will not be accurate, and you will need to adjustthe fields type and length on the fields tab. This is the case with the field length and type.
Thanks
Reddy

Amendment to Datasource using Function Module

Alright Guys,
Can someone help me? I have amended the '0PU_IS_PS_43' datasource and I need to 'unhide' the new fields I have added. I have logged into trans RSO2 to unhide these fields, but received the following warning - how do I resolve this?
"DataSource 0PU_IS_PS_43 is extracted using functional module FM_BW_BUDGET_ENTRY_DOCUMENTS
Message no. RJ042
Diagnosis
Up to now, DataSource 0PU_IS_PS_43 has been extracted using function module FM_BW_BUDGET_ENTRY_DOCUMENTS If you edit and save the DataSource using maintenance of the generic extraction, the extraction will no longer be extracted using this function module, instead this will be done using a database view, a transparent table, an InfoSet of the SAP query or a user-defined extraction module.
If 0PU_IS_PS_43 is included in delivered SAP Content, you can reactivate the extraction using function module FM_BW_BUDGET_ENTRY_DOCUMENTS by transferring this content with transaction RSA5 or the IMG."
Thanks,
Scott

Hi
You do not hide/unhide or manipulate this DA thru RSO2 (as its also obvious from the message) but rather thru RSA5 and you should extend the DS via User Exit (CMOD).
Reg's
Edan

Can anybody explain me creating Generic Datasource using Function module?

Hi,
can anybody explain me creating Generic Datasource using Function module?
Thax in advance,
Ravi.

Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
1. Create s structure with the fields that you need from the 4 tables . Activate.
2. Goto SE 80 Select The Function Group , Copy , Select the Function module
" RSAX_BIW_GET_DATA_SIMPLE " and Give a New name starting With
Y or Z .
3. SE37 ->Your Function module name -> Change , In table tab give your structure
name by deleting the associated type given in " E_T_DATA " .
4. Now select source code and Do the coding . Give Data source name in Coding .
In your case you have to take data from more that 1 table .
5. Activate the Function Group .
6. In RSO2 Create the Data source , Give the Function Module Name , And Save.
7. RSA3 -> Give data source name and Check for the Records .
Creation of custom datasource. (Using function module)
<b>is an example</b>
1.Create a function group .
2. Structure ZTEST123
ZMATNR MATNR CHAR 18 0 Material Number
ZMTART MTART CHAR 4 0 Material type
ZMBRSH MBRSH CHAR 1 0 Industry sector
ZMATKL MATKL CHAR 9 0 Material group
ZBISMT BISMT CHAR 18 0 Old material number
ZMAKTX MAKTX CHAR 40 0 Material description
3. Create function module (i.e. ZTEST.) .
FM - YMARA_DATA_TRNS
FUNCTION YMARA_DATA_TRNS.
""Local Interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE ZTEST123 OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
data : ZTEST123 type ZTEST123 occurs 0 with header line.
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
S_COUNTER_DATAPAKID LIKE SY-TABIX.
DATA: begin of t_mara occurs 0,
ZMATNR type MATNR,
ZMTART type MTART,
ZMBRSH type MBRSH,
ZMATKL type MATKL,
ZBISMT type BISMT,
end of t_mara.
DATA: begin of t_makt occurs 0,
ZMATNR type MATNR,
ZMAKTX type MAKTX,
end of t_makt.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Check DataSource validity
CASE I_DSOURCE.
WHEN 'ZZMARA_DATA'.
WHEN OTHERS.
IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
LOG_WRITE 'E' "message type
'R3' "message class
'009' "message number
I_DSOURCE "message variable 1
' '. "message variable 2
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDCASE.
Fill parameter buffer for data extraction calls
S_S_IF-REQUNR = I_REQUNR.
S_S_IF-DSOURCE = I_DSOURCE.
S_S_IF-MAXSIZE = I_MAXSIZE.
ELSE. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
IF S_COUNTER_DATAPAKID = 0.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
select MATNR
MTART
MBRSH
MATKL
BISMT
from mara up to 10 rows
into table t_mara.
if not t_mara[] is initial.
select MATNR
maktx
from makt
into table t_makt
for all entries in t_mara
where matnr = t_mara-zmatnr.
endif.
loop at t_mara.
read table t_makt with key zmatnr = t_mara-zmatnr.
ZTEST123-zmatnr = t_mara-zmatnr.
ZTEST123-ZMTART = t_mara-ZMTART.
ZTEST123-ZBISMT = t_mara-ZBISMT.
ZTEST123-ZMBRSH = t_mara-ZMBRSH.
ZTEST123-ZMATKL = t_mara-ZMATKL.
ZTEST123-zmaktx = t_makt-zmaktx.
append ZTEST123.
clear ZTEST123.
endloop.
clear E_T_DATA.
refresh E_T_DATA.
E_T_DATA[] = ZTEST123[].
ENDIF.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF. "Initialization mode or data extractio
ENDFUNCTION.
3. Create the data source using transaction (RSO2).
4. If structure exists for the table parameter of your function module then ok else create a structure for the table parameter E_T_DATA.
5. Test the datasource in R/3 using transaction RSA3.
6. Transfer the data source to BW System and replicate it in the BW-System.

CRM 2011: Can you control which form is used based not security roles, but on a field value?

I see that you can control which form is used based on security roles, but can you control it based on other field values? I'd like a new record to use a different form until a given status is updated. I have a status of draft and active. So
it would be nice if I could use form1 for those in draft, form2 for those that are active. But I only see where you can control that via the security roles.
I can code all of this via JavaScript, but having the ability to use two separate forms would be nice. Is that even possible.
Best regards,
Jon Gregory Rothlander

Hello,
Recheck following article - http://gonzaloruizcrm.blogspot.com/2014/11/avoiding-form-reload-when-switching-crm.html
Dynamics CRM MVP/ Technical Evangelist at SlickData LLC
My blog

Why is the "From:" field being changed in Mac Mail. I have multiple gmail accounts setup and it seems to change the "FROM" field even though I've selected which account to use to send the email.

So
I've got multiple gmail accounts setup in Mac Mail.
Somtimes when I send or forward emails, it uses the wrong FROM field even though I'm declaring
specifically which account to use.
This becomes apparent when the person replies to my message and it goes to the wrong account

Check you accounts in Mail and make sure each account has the correct outgoing server address. Check the box to use only that server.
Second, go to the gmail website and in settings under the account tab, make sure you have the correct settings for replying to messages.

Creation of drop down for a field which is created using otr

Hi experts
I have a requirement wherein i have to create a dropdown for a field which is added using otr (online text repository).
When i did an F2 on the field on the UI i found that it had no context node and attribute and the view in the component workbench did not have a configuration also. The coding for that field is done in the htm page of that view using otr.
For this field i need to create a dropdown (the dropdown values will be fixed). I thought it would be better to code in the method do_init_context.
Request you to help me out with the code for this requirement as i do not have any idea with regard to otr.
Thanks and regards
Preeti Viswanath

Hi Preeti,
1.You need to maintain a page attribute(dd_list_type) which is of table type to the htm page of your view.
2.Then in the set_models method of your view controller add the following code:
* Put the data into the view attribute
view->set_attribute(
        name   = 'dd_list_type'
        value = lt_list_type ).
You can add OTR text list to the internal table lt_list_type.
3.Then add the following code to .htm
* ADDITIONAL CODING IN VIEW
<% data:           lr_listl_type type ref to data.
   field-symbols: <list_type>   type table.
   get reference of dd_list_type into lr_list_type.
   assign lr_list_type->* to <list_type>.
%>
<htmlb:dropdownListBox id="ListType"
                       table = "<%= <list_type> %>"
                       selection = "<%=controller->gv_model_id %>"
                       nameOfKeyColumn = "KEY"
                       nameOfValueColumn = "VALUE"
                       />
Regards
Leon

How to determine which processes are using a module?

I want to find out which processes are using a kernel module.
However this info is shown neither with ``lsmod'' nor in
/sys/modules/<mod_name>/.
It's needed to reload certain modules which are acting buggy,
in a bash script. Right now I just keep a list of processes which
use the module and try to kill'em all, not exactly a beautiful
solution.
To work around it I compiled a kernel with
``CONFIG_MODULE_FORCE_UNLOAD=y'', however actually
trying to unload anything with this results in an unstable system.
Suggestions?

After successfully syncing the configuration database I ran the configuration compliance job once more, however with the same (misleading) results. Cross-checking the configuration reveals that none of the devices marked as compliant are actually having the "ip helper-address" configured.
Maybe it is something wrong with the input data I specified for the compliance template (ref step 1-6 in my first post)?
Or maybe the Compliance Jobs arent the best ways to determine whether or not my devices are having the "ip helper-address" configuration defined?

How to identify Which function modules are used in the planning area?

Hi all,
there are couple of function module derviation is used to derive the calendar year, month, fiscal period etc.
But how to identify which function module is used in which planning area?
I cant find out from the where used list from function modules?
Thanks
pooja

Hi Pooja,
Go to characteristic relationship tab,click on detail icon on extreme left of the derivation,there you will get the name and the details of function module used for derivation.
Regards,
Indu

Can I use a field name in text module

Hi,
I get a object name of the standard text in a field. Can I use that field in Text module.
Thanks,
Srinivas.

Go to t-code SMARTFORMS->Text Module->Create or Edit-> choose add icon and type your field name (used in your smartform) like this &fieldname&, then use this Text module in your smartform.

Generic DataSource using function module

Hello experts,
I created a generic dataSource using copy of function module RSAX_BIW_GET_DATA. It is syntactilly correct. But when I execute and debug associated generic DataSource in RSA3, this generic function module could not identify DataSource(i_isource) and update mode(i_updmode).
Could you please answer what went wrong?
I also created by using copy function module RSAX_BIW_GET_DATA_SIMPLE. I did not find above such problem. The generic DataSource is executed fine in this case.
Thanks in advance,
Zak.

http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c062a3a8-f44c-2c10-ccb8-9b88fbdcb008
/people/p.renjithkumar/blog/2009/10/07/generic-datasource-creation-using-function-module

Which module/datasource uses ROCANCEL field?

Similar Messages

Maybe you are looking for