Which ports are involved for ACS-ACS DB synchronisation ?

Hi all,
which ports are used when one ACS is pushing its database to another ACS ?

With ACS v4.x its port 2000.

Similar Messages

Which ports are needed for SAP HANA Studio - HANA DB communication?

I want to connect SAP HANA Studio to a HANA instance. The HANA instance number is 40.
The SAP note 1592925 states that the ports 5$$13/5$$14 and 3$$15 should be open to allow communication between the HANA Studio and the HANA database. I even see the instance in the HANA Studio, but I cannot administrate it and the HANA studio gives this general "I don't want you to know what the error actually is" message:
!ENTRY com.sap.ndb.studio.navigator 4 1 2012-01-16 14:01:40.627
!MESSAGE [HDB hostname 40 (SYSTEM)] Error on refreshing system
!SUBENTRY 1 com.sap.ndb.studio.navigator 4 0 2012-01-16 14:01:40.627
!MESSAGE SAPControl request failed
!STACK 0
com.sap.ndb.studio.sapcontrol.SAPControlException: SAPControl request failed
     at com.sap.ndb.studio.sapcontrol.operations.SAPControlOperation.execute(SAPControlOperation.java:118)
     at com.sap.ndb.studio.sapcontrol.SAPControl.getInstanceProperties(SAPControl.java:439)
     at com.sap.ndb.studio.sapcontrol.SAPControl.collectProperties(SAPControl.java:466)
     at com.sap.ndb.studio.sapcontrol.SAPControl.open(SAPControl.java:297)
     at com.sap.ndb.studio.sapcontrol.SAPControlManager.getSAPControl(SAPControlManager.java:108)
     at com.sap.ndb.studio.sapcontrol.SAPControlManager.getSAPControl(SAPControlManager.java:81)
     at com.sap.ndb.studio.sapcontrol.SAPControlManager.needCredentials(SAPControlManager.java:57)
     at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTrySAPControl(SAPSystemObjectUpdate.java:102)
     at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:63)
     at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:75)
     at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:67)
     at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
     at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.call(Unknown Source)
     at com.sap.ndb.studio.sapcontrol.operations.SAPControlOperation.execute(SAPControlOperation.java:94)
     ... 11 more
Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
     at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.post(Unknown Source)
     ... 13 more
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.SocksSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at sun.net.NetworkClient.doConnect(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.<init>(Unknown Source)
     at sun.net.www.http.HttpClient.New(Unknown Source)
     at sun.net.www.http.HttpClient.New(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
     ... 14 more
Do I need to open any other ports to make HANA Studio work with HANA DB?
Regards,
Mark

Hi Mark,
The HANA Studio connects to HANA DB Instance with JDBC on port 3<Instance number>15.
For your HDB with Instance Number 40, the port would be 34015.
HANA Studio will automatically assign the JDBC port number when you assign the instance number when you add new system.
Looking at the error message that you posted:
!ENTRY com.sap.ndb.studio.navigator 4 1 2012-01-16 14:01:40.627
!MESSAGE [HDB hostname 40 (SYSTEM)] Error on refreshing system
It looks like the hostname entry was not entered correctly (you might have entered "hostname" value when adding the system in HANA Studio).
Here is an example of correct log entry on DCA database instance on hanasvr-01 server with Instance number 00:
!ENTRY com.sap.ndb.studio.navigator 4 1 2012-01-10 13:55:23.598
!MESSAGE [DCA hanasvr-01 00 (SYSTEM)]
You may want to delete and re-add your HDB instance in your HANA Studio.
Regards,
Ferry

Which ports are required by ODMA?

I am an SAP R/3 administrator.
I want to upgrade from Oracle 8.0.6.3 to 8.1.7.3 under AIX 4.3.3
So I need to use the RUNINSTALLER followed by the ODMA
I want to do this remotely, passing out through one firewall then in through another.
My X-emulation is ReflectionX, for which I already have firewall transparency for port 6000 .
My question: Which ports are required for RUNINSTALLER + ODMA
Thanks in advance,
Keith

Hi Keith!
This forum deals with issues specifically related to the Oracle Migration Workbench product. This product is used to migrate non Oracle databases to Oracle8i & Orace9i. (It does not enable you to migrate from one Oracle database version to another!)
In order to get assistance in performing a migration frrm one Oracle database version to another you should contact Oracle RDBMS Support. You should be able to find their contact details in the Documentation that comes with ODMA.
hope this helps
- Garry

Which ports are used by LMS 4.2.5 Software Center

Hi everybody!
we are trying to download device updates and packages via the software center of lms 4.2.5. but get the attached error msg.
Which ports are used for the download (for firewall configuration)
I can't find the used ports for this function in the install guide.....
I am very thankful for any suggestions!
Edit:
here is the log output:
[ Sun Jan 04 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
[ Sun Jan 04 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Sun Jan 04 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyPort] : No proxy port confgured
[ Sun Jan 04 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
[ Mon Jan 05 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
[ Mon Jan 05 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Mon Jan 05 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyPort] : No proxy port confgured
[ Mon Jan 05 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
there is no proxy in use, so the is none configured :)

Hi,
Looks like you are encountering this BUG
CSCur85172    Unable to installing the device packages from cisco.com using LMS Server
Try this to resolve the issue::
Stop Daemon Manager
2.            Change the protocol 'http' to 'https' for the below URL's in vds.properties
file located under /NMSROOT/lib/classpath/com/cisco/nm/xms/vds/.
NGCcoScript=http://tools.cisco.com/software/catalog/swcs/softwaremetadata
NGCcoImageScript=http://tools.cisco.com/software/catalog/swcs/image
TO
NGCcoScript=https://tools.cisco.com/software/catalog/swcs/softwaremetadata
NGCcoImageScript=https://tools.cisco.com/software/catalog/swcs/image
3.            Start the Daemon Manager.
Thanks-
Afroz
****Ratings Encourages Contributors ****

How do I upload to Facebook in High Resolution using my iPhone. Do I need an app? Which ones are best for the job? (I know how to do it on a PC :) )

How do I upload photos to Facebook in High Resolution using my iPhone. Do I need an app? Which ones are best for the job? (I know how to do it on a PC )

100pat wrote:
Thanks, I can do it fine from my Windows desktop PC, I just want to know how to do it from an iPhone4
Like I said before ask facebook or look at their support site to see if that is even a feature.

How to identify Which ports are using in RAC setup?

Hi,
how to identify Which ports are using in RAC setup?
Thnaks,

[Viewing Port Numbers and Access URLS|http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/ports.htm#sthref1208]

Which archivelogs are required for restoring database

I'm moving to RMAN direct to tape backups (via Netbackup). I'm hoping someone can clarify for me which archivelogs are needed for restoring/recovering a RMAN "hot" backup.
I will have two tape pools with different retention periods:
- standard (kept for 2 months)
- long term (kept for 7 years)
I plan to backup as follows:
- archivelogs every 15 mins direct to the standard pool
- daily backups to the standard pool
- monthend backups to the long term pool
Month ends will either be a full or a full plus a cumulative (level 2) (depending on the weekday that month end falls on).
The bit I'm concerned about is archivelogs. After 2 months they will be expired on tape. But do I need archive logs in order to restore the month end backups?
At the moment I record the SCN before the backup begins and after it finishes (retrieved via select first_change# first_scn from v$log where status = 'CURRENT'). Before recording the post-backup SCN, I force a logfile switch.
For clones, I always restore to the post-backup SCN that I previously recorded (rather than using the tag I associated with the backup).
So a few questions related to restoring after the 2 month window:
- do I need the archivelogs created during the timespan of the backup ran in order to restore to the post-backup SCN?
- If so, is just backing up these archivelogs (to the long term pool) by specifying the range of pre-backup SCN to post-backup SCN sufficient or are additional archivelogs likely to be required?
- if I restore the database and don't specify an SCN but just specify the tag used at the time of the backup, will archive logs be required at all? In this case what would be the state of the restored database - would it be as it was at the beginning or at the end of the backup?

Hi user4835675,
do I need the archivelogs created during the timespan of the backup ran in order to restore to the post-backup SCN?Yes.
If so, is just backing up these archivelogs (to the long term pool) by specifying the range of pre-backup SCN to post-backup SCN sufficient or are additional
archivelogs likely to be required?Can you do a skip of the daily backup schedule duing the monthend backups run and run the "archivelogs every 15 mins" job to the long term pool?
Or temporarily stop the "archivelogs every 15 mins" job during the monthend job and run the monthend backup with the "backup database plus archivelog" clause?
if I restore the database and don't specify an SCN but just specify the tag used at the time of the backup, will archive logs be required at all?Yes, you need archivelogs to recover the datafiles to a consistent state.
In this case what would be the state of the restored database - would it be as it was at the beginning or at the end of the backup?You can only restore to a point in time which past the end of the backup.
Rgds,
Tycho

Which topics are required for CRM consultants from BW consultants

hi experts,
In which scenario BW consultants will hepfull to the CRM consultants, It means what type information they will require from BW consultants.
In BW which topics are usefull for CRM consultants.
thanks & regards
venkat

Dear Desu siva anjith,
you just understand how to prepare reports and how these reports are related to crm.....
learn what u need in crm.....
shaik..

Jwsc Error - Only HTTP ports are supported for JAX-WS

Hi
I am trying to create a Webservice from wsdl. I have been able to generate java files and jar file with wsdlc ant task.
However when i try jwsc I get follwoing error
[jwsc] [ERROR] - Only HTTP ports are supported for JAX-WS.
<----- follwowing task for generating java files --->
<taskdef name="wsdlc" classname="weblogic.wsee.tools.anttasks.WsdlcTask"/>
<target name="generate-from-wsdl">
          <wsdlc
               srcWsdl="wsdl_files/UserPrefWebService.wsdl"
               destJwsDir="web/web-inf/lib"
               destImplDir="src"
               packageName="com.ws.userpref"
               type="JAXWS"/>
     </target>
<----- follwowing task for generating class files ----THIS IS FAILING --->
     <taskdef name="jwsc" classname="weblogic.wsee.tools.anttasks.JwscTask" />
     <target name="build-service">
          <jwsc srcdir="src" destdir="ear">
               <jws file="com/ws/userpref/UserPrefWebServiceImpl.java"
                    compiledWsdl="web/web-inf/lib/UserPrefWebService_wsdl.jar"
                    type="JAXWS"/>
          </jwsc>
     </target>
<----- This is the Error --->
C:\Development\CFCDemoWorkspace\UserPreferencesServer>ant build-service
Buildfile: build.xml
build-service:
[jwsc] JWS: processing module /com/ws/userpref/UserPrefWebServiceImpl
[jwsc] Parsing source files
[jwsc] Parsing source files
[jwsc] 1 JWS files being processed for module /com/ws/userpref/UserPrefWebS
erviceImpl
[jwsc] C:\Development\CFCDemoWorkspace\UserPreferencesServer\src\com\ws\use
rpref\UserPrefWebServiceImpl.java 18:8
[jwsc] [ERROR] - Only HTTP ports are supported for JAX-WS.
[AntUtil.deleteDir] Deleting directory C:\DOCUME~1\138904\LOCALS~1\Temp\_3os716
BUILD FAILED
C:\Development\CFCDemoWorkspace\UserPreferencesServer\build.xml:24: weblogic.wse
e.tools.WsBuildException: JWS Validation failed.
Total time: 10 seconds
Does any one has any input on this error?
Thanks
Srikant

Thanks David,
Below is the wsdl
<s0:message name="ws_getUserPreference">
<s0:part element="s1:ws_getUserPreference" name="parameters"/>
</s0:message>
<s0:message name="ws_getUserPreferenceResponse">
<s0:part element="s1:ws_getUserPreferenceResponse" name="parameters"/>
</s0:message>
<s0:portType name="UserPrefWebServicePort">
<s0:operation name="ws_getUserPreference" parameterOrder="parameters">
<s0:input message="s1:ws_getUserPreference"/>
<s0:output message="s1:ws_getUserPreferenceResponse"/>
</s0:operation>
</s0:portType>
<s0:binding name="UserPrefWebServiceSoapBinding" type="s1:UserPrefWebServicePort">
<s2:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<s0:operation name="ws_getUserPreference">
<s2:operation soapAction="" style="document"/>
<s0:input>
<s2:body parts="parameters" use="literal"/>
</s0:input>
<s0:output>
<s2:body parts="parameters" use="literal"/>
</s0:output>
</s0:operation>
</s0:binding>
<s0:service name="UserPrefWebService">
<s0:port binding="s1:UserPrefWebServiceSoapBinding" name="UserPrefWebServicePortSoapPort">
<s2:address location="https://localhost:7001/UserPrefService/UserPref"/>
</s0:port>
</s0:service>
</s0:definitions>
do i need to add <wlhttptransport/> in jws during the buid?

Which upgrades are relevant for me?

Hi all.
I am going to order the new iMac 21,5" 2.9 GHz and I need some help figuring out which upgrades are relevant for me.
I am going to use the iMac for the following:
- Webdesign (my profession)
- Photoshop and perhaps other Adobe applications
- Lots and lots of multitasking and many tabs in browsers
- Screen Flow application (screen recording software)
- Dual boot with Windows 7
- Time Capsule backups
- Gaming (Sims 3 primarily - in Windows 7)
I want it to be "future proof", but since hyperthreading isn't widely used in applications yet and people write that the majority of people never go beyond 4GB of RAM i'm onsure whether I should upgrade the CPU and RAM.
Also, since the iMac 21,5" is not user-upgradeable after you get it, I want to make sure that I don't end up having a slow computer that I wish I would have made better/faster. I just want it to function fast and smooth. Today I have a MBP 15" medio 2009, 2.66 Ghz Intel Core 2 Duo, 4GB RAM, which I think performs overall well but is a bit slow sometimes.
The only upgrade I seem sure of for now is the 1TB Fusion Drive.
Thanks in advance!

Although I am sure you have seen all this ... this is the formal description of that machine. Apple (United Kingdom) - iMac - Technical Specifications
I cannot answer you questions about the specific tasks you plan to use it for; they are simply outside of my knowledge base, but you do raise points about being 'future proof', as you describe it, and I am afraid Apple is no more future proof than any other computer. It is a fact that the sales of Apple machines rely on upgrading at periodic intervals, often using upgrades that were designed and known about two years before. That, I'm afraid, is business.
As far as the RAM is concerned you will have to decide between 8 GB and 16 GB when you order it as it cannot be RAM increased afterwards. (The 27" can, I understand.
Very much based on talk within the forums but I hope this is of some help to you.

Which tables are used for Quality Efficiency calculation of OEE report ?

Hello,
We're confirming OEE report behavior.
I'd like to know OEE report and ME table specification.
Which tables are used for Quality Efficiency calculation of OEE report ?
According to I know, the definition of Quality Efficiency is (complete qty) / (start qty).
For this calculation, does OEE report just use qty_started and qty_completed of PRODUCTION_LOG table?
If any other tables/columns/logic are implemented, your information is appreciated.
Best Regards,
Takahiro Uesugi

hi
Go to BSIS & BSAS
BKPF
SKA1
SKAT
SKB1
Regards
Roobal

Which ports are used by oracle datbase and management agent other than 1521

Hi,
Which ports are used by oracle datbase and management agent other than 1521 and the default port of management agent?
Regards,
Rjiv.

Check Port Numbers and Protocols of Oracle Components and also check your portlist.ini in $ORACLE_HOME/install directory.

Which port is open for connection ?

how could I know which port is open for connection ?
In the java, I use JDBC to connect to Oracle,
connection = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:sid", "scott","tiger");Do we have a command to show open port ?
Thanks.

What is your Oracle version, and do you use dedicated connections or "shared servers"? From your port number invoked (1521), I'll guess you use dedicated connections. In that case, the listener (located at 1521) will "spawn" a dedicated process for your session, and tell this process to start on another port (usually falling on a certain range, depending on your OS). An easy way to see this would probably to turn listener tracing on. Here's what I found in the log file after I started a new (dedicated) session on my 10.2 DB:
"22-OCT-2006 21:31:16 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ora102)(CLIENT_REGISTRATION=ora102)(CID=(PROGRAM=C:\oracle92\bin\sqlplusw.exe)(HOST=DANIELROYLAPTOP)(USER=Daniel))(CLIENT_REGISTRATION=ora102)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.100)(PORT=3198)) * establish * ora102 * 0"
HTH
Daniel

Which packages are required for make?

I'd like to compile athcool and grabbed the source, but for the life of me, can't figure out which packages are needed for make.

Thanks for the suggestion. I got errors:
# pacman -S base-devel
base-devel package not found, searching for group...
:: group base-devel (including ignored packages):
diffutils ed gcc libtool m4 patch pkgconfig
:: Install whole content? [Y/n] y
:: group base-devel (including ignored packages):
autoconf automake make
:: Install whole content? [Y/n] y
:: group base-devel (including ignored packages):
autoconf automake bin86 bison ed fakeroot flex gcc libtool m4
make patch pkgconfig
:: Install whole content? [Y/n] y
warning: diffutils-2.8.1-5 is up to date -- reinstalling
warning: gcc-4.3.2-2 is up to date -- reinstalling
warning: pkgconfig-0.23-1 is up to date -- reinstalling
warning: automake-1.10.2-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (14): diffutils-2.8.1-5 ed-1.1-2 gcc-4.3.2-2 libtool-2.2.6a-1
m4-1.4.12-1 patch-2.5.9-1 pkgconfig-0.23-1 autoconf-2.63-1
automake-1.10.2-1 make-3.81-3 bin86-0.16.17-3 bison-2.4.1-1
fakeroot-1.12.1-1 flex-2.5.35-1
Total Download Size: 1.59 MB
Total Installed Size: 78.50 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core-testing...
diffutils-2.8.1-5-i686 191.5K 65.8K/s 00:00:03 [#####################] 100%
ed-1.1-2-i686 45.7K 63.6K/s 00:00:01 [#####################] 100%
libtool-2.2.6a-1-i686 578.7K 121.0K/s 00:00:05 [#####################] 100%
patch-2.5.9-1-i686 54.3K 67.9K/s 00:00:01 [#####################] 100%
pkgconfig-0.23-1-i686 49.9K 62.7K/s 00:00:01 [#####################] 100%
:: Retrieving packages from core...
bin86-0.16.17-3-i686 54.5K 210.0K/s 00:00:00 [#####################] 100%
bison-2.4.1-1-i686 427.0K 52.3K/s 00:00:08 [#####################] 100%
fakeroot-1.12.1-1-i686 52.7K 99.6K/s 00:00:01 [#####################] 100%
flex-2.5.35-1-i686 176.0K 57.1K/s 00:00:03 [#####################] 100%
checking package integrity...
(14/14) checking for file conflicts [#####################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
/usr/info/dir exists in both 'diffutils' and 'make'
make: /usr/info/dir exists in filesystem
Errors occurred, no packages were upgraded.
Last edited by graysky (2009-02-17 01:44:04)

Which privileges are required for sql tuning advisor

Hi,
Oracle 10g
1> I want to know which privileges are required for running sql tuning advisor...
2> Some queries are taking long time.. if i run sql tuning advisor..shud i first try it out on development database or directly on prod database
Regards

1> I want to know which privileges are required for running sql tuning advisor...
As SQL tuning advisor relies on the advisor framework, so all tuning task interfaces (XXX_TUNING_TASK) require privilege ADVISOR.
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_sqltun.htm#CACDFEBH
Some queries are taking long time.. if i run sql tuning advisor..shud i first try it out on development database or directly on prod databaseDo you mean the implementation?
Adith

Which ports are involved for ACS-ACS DB synchronisation ?

Similar Messages

Maybe you are looking for