While executing in DTP, Conversion Type missing

Hello Sir:
I can see my data is loaded OK in PSA through infopackage. While executing DTP, I get the error "CONVERSION TYPE MISSING" for my keyfigure. any idea for the error, and its fix
Regards

hi mark,
u should have created transformation rule .
1.go to transformation rule.
2.u will have 2 tables one for source second for target table.
3.two tables would be mapped one u give the data source right.
4.here go to that infoobject that asks for the stated error.
5.click the group rule for that infoobject.
6.u find a pop up having conversions from source to target specify wat ever conversion u need and check it out.
if error still persists .
check for u r infobject is it a fixed currency/uom.
try to write a routine for the target conversion in start routine .
thank u.

Similar Messages

Short dump while executing the DTP

Dear Experts,
While executing the DTP the system is generated short dump and it is Quality server not in Development system.
The error details are in method Calculate_keyfigure_ds and the data is loaded for IS retails from POSDM.
The error details:
"The MOVE-CORRESPONDING statement can only be used on operands with a
structured type.
In the case at hand, this condition is not fulfilled: Operand "<L_STRUC>" has
the type "C"."
Regards,
Amit

Hi Amit ,
Move corresponding statements can be used for structures only and from the error message it seems that there is datatype mismatch.
Check for the errors ion link :
http://help.sap.com/abapdocu/en/ABAPMOVE-CORRESPONDING.htm
Hope it helps ,
Regards,
Supriya

Conversion Type Missing ERROR

Hi Friends,
Can any one please help me with this error which i am getting while activting transformation on cube, message - "Conversion Type Missing - must assign to InfoOject" Error.
I have a key fig which is an amount filed, to which i have provided fixed currency.
Its urgent Thanks
Mark

hi mark,
u should have created transformation rule .
1.go to transformation rule.
2.u will have 2 tables one for source second for target table.
3.two tables would be mapped one u give the data source right.
4.here go to that infoobject that asks for the stated error.
5.click the group rule for that infoobject.
6.u find a pop up having conversions from source to target specify wat ever conversion u need and check it out.
if error still persists .
check for u r infobject is it a fixed currency/uom.
try to write a routine for the target conversion in start routine .
thank u.

Error while executing a DTP

Hi All ,
I got an error while executing a DTP. Short Dump analysis points this error. : DBIF_REPO_SQL_ERROR.
Please provide in your valuable inputs to resolve this error.
Thank & Regards,
Rohit Garg

This error comes majorly when you have a deadlock in your code. Check ST22 if you have any short dump corresponding to it and see the source code where it is getting stuck.
If you find this dump explaining table space issue, then contact Basis, they will be able to help you with table space problem.
Edited by: Deepmala Agarwal on Aug 18, 2009 7:40 AM

Short Dump Error while executing the DTP

Hello Experts,
I am facing an issue with DTP.
Data has been loaded to PSA successfully but while executing the DTP for loading from PSA to DSO (WO) throwing a short dump RAISE_EXCEPTION.
Short text
Exception condition "NO_DS_LG_FOUND" raised.
"RAISE_EXCEPTION" " "
"SAPLRSSTATMAN" or "LRSSTATMANU1
"RSSTATMAN_GET_PARTTAB_PSA"
or
"SAPLRSSTATMAN" "NO_DS_LG_FOUND"
or
"RSAWBN_START " "NO_DS_LG_FOUND"
We are on BI support pack 14 SAPKW70014, searched for OSS notes but there are few for SP 12/ 13.
Did any body faced the simlliar issues,,,, please help
Appreicate your quick response.

You may wish to check this
Note 1083305 - P16:STATMAN:Dump in function module RSM_INFOCUBE_WRITE_CHECK
Hope it Helps
Chetan
@CP..

Short Dump while executing New Hire (action type) in PA40

Hi All,
i am getting short dump while executing PA40 for new hire action type can anyone look into this and guide as i am new to HCM.
Category               ABAP Programming Error
Runtime Errors         SYNTAX_ERROR
ABAP Program           /1PAPAXX/HDR_21000A
Application Component Not Assigned
Date and Time          21.08.2014 14:07:03
Short text
    Syntax error in program "/1PAPAXX/HDR_21000A ".
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPFP50M" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "/1PAPAXX/HDR_21000A " in
    include "/1PAPAXX/HDR_21000AO01 " in
    line 52:
    ""LV_LENGTH" has already been declared"
    The include has been created and last changed by:
    Created by: "HCM04 "
    Last changed by: "HCM03 "
    Error in the ABAP Application Program
    The current ABAP program "SAPFP50M" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
What can you do?
    Please eliminate the error by performing a syntax check
    (or an extended program check) on the program "/1PAPAXX/HDR_21000A ".
    You can also perform the syntax check from the ABAP Editor.
    If the problem persists, proceed as follows:
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    The following syntax error was found in the program /1PAPAXX/HDR_21000A :
    ""LV_LENGTH" has already been declared"
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
System environment
    SAP Release..... 731
    SAP Basis Level. 0007
    Application server... "dc-ds-erp"
    Network address...... "172.16.23.111"
    Operating system..... "Linux"
    Release.............. "3.0.13-0.27-default"
    Hardware type........ "x86_64"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 1
    Shortdump setting.... "full"
    Database server... "dc-ds-erp"
    Database type..... "ORACLE"
    Database name..... "ECD"
    Database user ID.. "SAPSR3"
    Terminal.......... "NLC-HP"
    Char.set.... "C"
    SAP kernel....... 720
    created (date)... "Sep 14 2013 06:16:24"
    create on........ "Linux GNU SLES-11 x86_64 cc4.3.4 use-pr130820"
    Database version. "OCI_112, 11.2.0.3.0, V1, default"
    Patch level. 500
    Patch text.. " "
    Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
    SAP database version. 720
    Operating system..... "Linux 2.6, Linux 3"
    Memory consumption
    Roll.... 0
    EM...... 37708200
    Heap.... 0
    Page.... 106496
    MM Used. 4666776
    MM Free. 3709976
User and Transaction
    Client.............. 210
    User................ "HCM03"
    Language key........ "E"
    Transaction......... "PA40 "
    Transaction ID...... "53EF470299AB5D67E1000000AC10176F"
    EPP Whole Context ID.... "005056A301D11EE48A9D08B337F884E3"
    EPP Connection ID....... 00000000000000000000000000000000
    EPP Caller Counter...... 0
    Program............. "SAPFP50M"
    Screen.............. "MP000000 1000"
    Screen Line......... 3
    Debugger Active..... "none"
Information on where terminated
    Termination occurred in the ABAP program "SAPFP50M" - in
    "GET_HEADER_WITH_TCLAS".
    The main program was "MP000000 ".
    In the source code you have the termination point in line 146
    of the (Include) program "FP50MDHD".
Source Code Extract
Line
SourceCde
116
CALL FUNCTION 'HR_HEADER_GET'
117
      EXPORTING
118
           DHDID                    = FHD_HID
119
           BEGDA                    = BEGDA
120
           TCLAS                    = TCLAS
121
* Es wird nur einer der folgenden 3 Parameter benutzt.
122
* Ausgewertet wird zunaechst MOLGA, dann P0001 dann PERNR.
123
* Der erste der nicht initial ist wird ausgewertet.
124
*           MOLGA                   =
125
           P0001                    = P0001
126
           PERNR                    = PSPAR-PERNR
127
      IMPORTING
128
           PROG                     = HEADER_PROG
129
           DNUM                     = HEADER_DYNNR
130
       EXCEPTIONS
131
            HEADER_DEACTIVATED          = 1
132
            HEADER_UNKNOWN              = 2
133
            HEADER_GENERATE_DEACTIVATED = 3
134
            HEADER_GENERATE_FAILED      = 4
135
            INTERNAL_ERROR              = 5
136
            OTHERS                      = 6.
137
138
IF NOT SY-SUBRC IS INITIAL.
139
* Bei Problemen gibt's eben ein leeres Dynpro.
140
    HEADER_PROG = 'SAPMP50A'.
141
    HEADER_DYNNR = '0090'.
142
ELSE. " NOT sy-subrc IS INITIAL.                                   "
143
* Dann setzen wir jetzt auch noch das Datum fest.
144
    PERFORM HEADER_BEGDA_SET IN PROGRAM (HEADER_PROG) USING BEGDA.
145
* Und schalten auf Uebergabe der PERNR mit globalen Variablen.
>>>>>
    PERFORM HEADER_LAZY_ON IN PROGRAM (HEADER_PROG).
147
ENDIF. " (ELSE) NOT sy-subrc IS INITIAL.                           "
148
* Merken wie der Header heisst. Damit MPPERS00 sich erinnern kann.

Hi,
Error Log: Syntax error
""LV_LENGTH" has already been declared"
please check LV_LENGTH variable declaration.
It may be declared more once!

Currency Conversion Type missing in BEx

I have created a new conversion translation type M1 based on Monthly Average exchange.
RSCUR definition for this conversion on the time ref tab to be a "variable time reference"- End of Period for
Standard Info Object Fiscal Period "0FISCPER".
Is this configuration the cause for placing a limiting restriction on the visability of this selection at runtime of query.
The following currency translation types are not available at the runtime of the query.
●      Translation types for which a variable is stored (variable time reference, source currency from variable, target currency from variable, and so on).
From BEx I am unable to select Currency Conversion (Convert to Currency USD) and Use of Currency Translation M1
Thank You ...... Dan

Andrey:
Once BEx query results are displayed in M/S excel ... the user navigates (right click) to (local) query properties:
Tab >> Currency Conversion >> select Convert to Currency will open option to determine Currency (USD) and Currency Translation (via drill down).
Those Currency conversion types configured with variable time reference on InfoObject 0FISCPER cannot re-determine
target currency values. Fixed Time reference conversion types can be selected through BEx.
I found a restriction/ limitation in the following thread.
http://help.sap.com/saphelp_nw70/helpdata/en/ec/076f3b6c980c3be10000000a11402f/frameset.htm
Restrictions:
The following currency translation types are not available at the runtime of the query.
●      Inactive translation types
●      Translation types for which a variable is stored (variable time reference, source currency from variable, target currency from variable, and so on)
●      Translation types in which an InfoObject is used for determining the source currency or target currency.
Are you aware of any way around this ??
Thank you ....... Dan

Conversion factor missing for Exchange rate type BE

Dear Friends,
I am getting error while doing GR as " Conversion factor missing for exchange rate type INR TO USD"
waiting for your advice.
Thanks

Hi
In OBBS maintain the translation ratios between USD & INR and in OB08 enter the exchange rate for this pair of currencies
Anil

Runtime error while executing rule

Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type    TRFN
Error Location: Object Name    0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID   00034 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        557
and Also descripton is :-
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Division by zero
    The error was triggered at the following point in the program
    GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
    Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
   Transformation ID
   Data record number of the source record
   Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.

Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas.

Diadem runtime error while executing command "SchemeMeasStar"

Hello:
I used DIAdem9.0 and DAQCard6062E to acquire 16 channel data. I collected 65536 data for every channel. Whereas After the data acquisition stopped, an Error Message would poped up, but the data is still stored in data portal. the Error is like follows:
-Error- DIAdem
Runtime Error While Executing Command "SchemeMeasStar"
Error Type: UNKNOWN
Error Address:00001720
Module Name:GFSBase.Dll
Would you like to give me some suggestions?
thanks very much
jing

Dear MarcusP:
Thank you very much.
your solution really works. The attached is the detailed information of the problem. Would you like to tell me more about the prolem and how to solve the problem thoroughly.
Thank you very much.
yours
Jing
Attachments:
DIAdem_Error.doc ‏305 KB

Error while executing Automatic Workflow Customizing

Hi!!!!!!
In ECC6.0, i need to activate all the workflows in SWU3 (Automatic Workflow Customizing), but i was able to activate only some of the steps, remaining is still in red mark. While executing "Schedule Background Job for Missed Deadlines", it is giving error as "Object with runtime number ' 0' not defined". So please let me know how to resolve this issue.
Regards,
Ranjith

Hi Kumar,
Please check with the link Work item xxxxx: Object BKPF method Zxxx cannot be executed. for the resolution.
With Regards,
Krishna.

CONVERSION TYPE

Hi All
Could you help me with conversion type. I have 2 IO IO_PRC (price ) and IO_QUANT( Quantity). I have selected fixed currency and unit in the IO definataion. When I creating transformation i get the message conversion type missing. why
is this. any help
Pankaj

Hi Pankaj,
the problem should be solved with SPS7. On which SPS level are you??
If you are already on SPS7, please check the available notes, whether any of those reflect your issue.
Cheers
SAP NetWeaver BI Organisation

Error while execute DTP

Hi Experts,
I create a new key figure on cube, then after this I had a problem when I execute the DTP.
Error while updating to target PS_C08T (type INFOCUBE)
Message number: RSBK241
I need help for this.
Thansk a lot.

Hi,
I think you have added the keyfigure in Infocube......... there after you need to activate the transformation and properly map the new target keyfigure with the source keyfigure .... then activate the transformation also activate the DTP as well....... then execute the DTP ......... hopefully it should solve the error....
If not then please provide some more details of the error............
Thanks
Mayank

Process chain failing while executing DTP

Hi All,
My process chain is failing while executing DTP.
Error i got is: OBJECTS_OBJREF_NOT_ASSIGNED
Access not possible using 'NULL' object reference.
The dump is occuring in method : GET_FIELD_LIST_INBOUND
TRY.
      CALL METHOD cl_rstran_model=>factory
        EXPORTING
          i_tranid = i_tranid
        RECEIVING
          r_r_model = l_r_model.
    CATCH cx_rstran_exception.
      RAISE EXCEPTION TYPE cx_rs_step_failed
ENDTRY.
From SDN , i am quite sure that its a SAP problem and needs to apply some Note.
Could anyone please tell me, which note i should apply ?
Thanks.

Hi,
check the note note 1081884 it may help you ..
check link ..
/message/2817339#2817339 [original link is broken]
Reagrds,
Shikha
Edited by: Shikha Goel on Oct 10, 2008 6:21 AM

TIME LIMIT EXCEEDED ERROR WHILE EXECUTING DTP

Hi gurus,
I Have got an error while executing
The errors are as follows.
1.Time limit exceeded. No return of the split processes
2.Background process BCTL_DK9MC0C2QM5GWRM68I1I99HZL terminated due to missing confirmation
3.Resource error. No batch process available. Process terminated
Note: Iam not executing the DTP as a back ground job.
As it is of higher priority the answers Asap Is appreciated.
Regards
Amar.

Hi,
how is it possible to execute a DTP in dialog process. In my mind it is only possible for debugging...
In "Display Data Transfer Process" -> "Goto" -> "Settings for Batch Manger" you can edit settings like Number of Processes or Job Class.
Additional take a look at table RSBATCHPARALLEL and
http://help.sap.com/saphelp_nw04s/helpdata/en/42/f29aa933321a61e10000000a422035/frameset.htm
Regards
Andreas

While executing in DTP, Conversion Type missing

Similar Messages

Maybe you are looking for