While executing smartform FM error msg it shows

Hi SAP Techinical Guru,
developing smartform from scratch after desinging form i executed, when executing FM
it shows messages like was generated but errors ocurred ,
please help on this.
best regards,

Srinivas,
Though the error comes at the status it comes in green.
Just see the print , you should not be getting any problem with that.
if you still face the problem then go to SE37 , give the generated FM name
Execute it again and check what is the error and in which part of the page.
Regards,
Ravi

Similar Messages

An error occurred while executing batch. Error message is: There is not enough space on the disk.

Hello all,
I execute a T-SQL query, which will retrieve large amount of data, however, I get an error message after a few seconde.
The error message is :
An error occurred while executing batch. Error message is: There is not enough space on the disk.
Who can tell me the reason and waht's the steps to solve this issue ?
Really thanks.
Thanks, Jed deng

The other two posters suggested that the problem with tempdb or you data/log files. This is not the case here. The error message relates to the client-side of things. Apparently SSMS needs to store data on disk. I don't recall exactly when this happens,
but I seem to recall that the files appear in you %TEMP% directory.
I would suggest that your correct action is to clean up the disk. Not the least there may be a lot of junk in your %TEMP% and %TMP% directories.
Erland Sommarskog, SQL Server MVP, [email protected]
Thanks Erland, I was not aware of this earlier. Now, I am able to find out one of the resons for slowness of SSMS gird. Also, I have just checked it with process monitor, SSMS is creating tmp%.tmp files..
- Chintak (My Blog)

Pls Help:internal error while executing smartform

hi experts..
I am getting the following error when i try to execute a smartform:
Internal error: (FORM = TEXT_ANALYSIS, ID = {E, RC =
Please help.
I am not abke to proceed further.
Regards
Srihari.

Hi,
If you want to include text in the smart form you can create a standard text in SO10.
1. Enter Text Name. For example, ZABC
2. Text ID ST
3. Language EN
Click on Create and enter the Required Information and save.
To include the Standard text in SmartForm.
1. Create a text node in the window.
2. Under general attributes select "Include text" as Type.
3. Specify the fields under Text.
Text Name ZABC
Text Object TEXT
Text ID ST
Language EN.
If tthe include text has to be read from any document, you can accordingly give the attributes like
Text Name - Document number
Text Object - header or item object type
Text ID - ID of the text (you can get these details in your document)
Language EN.
Hope it helps.
Regards.

While updating i receive error msg saying connection timed out?

i receive an error msg while updating versions, ( Network connection timed out ) i never had any troubles with my connection!! whats the solution:(
plz email me at [email protected]

I have a quick wifi connection (Mac shows it as about 35 megabits) but I couldn't get the 5.0.1 OTA to work, I had to do it via cable to my computer's iTunes - and as I was already on iOS 5 it was only a small download, basically the same size as the OTA size.
As the original poster is talking about a 730 meg download then I assume that they are still on iOS 4.3.5 or below and can therefore only download via their computer's iTunes - you need to be on iOS 5+ before you get the OTA option.

Prob While Creating Customer Master - Error Msg "Number '0' Not defined"

Dear Experts,
I am Trying to create a customer with diff SP, SH, BP and PY. I was able to create Customer for BP and PY.
But now when I go and try to created a SH customer with xd01 for my Sales.Org (99SS-XS-X1),
In the Sales Area Data, Partner Function Tab, Partner function field the Number is 0 before the SH function field (instead of Internal / Blank) and at the bottom give the error Msg that "Number '0' is not define". I have Cross checked the my Number ranges(no-22 from 7000-7999), account groups(ZA22) and Partner function (SH), everything seems to Ok. But unable to find the solution. plz help me with this if you have ever come across such a prob.
I would like to mention that the previously had no issues in creating customers following same procedure. I guess some one must have changed some settings by accident.
This prob is only specific while creating only SP and SH Customers.
Many ThanX.

Thanks Amit for your valuable suggestion, But today I was able to solve the problem with help of my trainer, Someone has changed the default settings in partner determination, the solution is below which will help anyone who may come across a similar Problem.
Spro->IMG->Sales & Distribution->Basic Functions->Partner Determination->Setup Partner Determination->Setup Partner Determination for Customer Master->Partner Functions
Find the partner Function SP/SH/BP/PY there partner type should be KU. If anyone changes this settings Then the above problem arises.
Regards.

Error while executing smartform

Hi Gurus,
After i save and execute the smarttform, when i give print preview..it says formatting error and throws an error like this:
"field within a field not allowed(vbdpa-brgew)"
Where did i go wrong. Please help.
Regards,
Rakesh.

Hi the reson is that you have not given the reference foeld for this in your smartform.Quantity and currency fields have to be given references.
In Global definitions you will find a tab called Curreny/Quant. Fields.
There you have to maintain references.

DUMP error while executing SMARTFORMS

hi ppl,
         In driver program i have coded like this-
types: begin of tw,
       ebeln type ebeln,
       bukrs type bukrs,
       bsart type bsart,
       end of tw,
tt type standard table of tw.
data: itab type tt,
      wa type tw,
      lf_ebeln type ebeln.
select-options: so_ebeln for lf_ebeln.
select ebeln bukrs bsart from ekko into table itab where ebeln in so_ebeln.
CALL FUNCTION '/1BCDWB/SF00000026'
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
    wa1                        = wa
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
tables
    itab1                      = itab
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
In smartforms-
form interface -export-> WA1 type ekko.
                      tables->ITAB1 like ekko .
IN left subtree ->main area, i have created 3 new columns and declred
loop itab1 into wa1.
cell1-text1-&wa1-ebeln&
cell2-text2-&wa1-bukrs&
cell2-text3-&wa1-bsart&
                                   but i know where the exact error is, there is a mismatch between wa1 with wa and also itab with that of itab1 in driver program.so iam not getting the exact solution.Is it always mandatory , for a table we need to declare whole its structure with header line in driver program and need to write select (select *) instead of (select ebeln bukrs bsart).plz some body help me in this issue.

Hi,
Hope it will be useful for u ... Sample Program for your reference ...
TABLES : EKKO.
PARAMETERS : P_EBELN TYPE EKKO-EBELN.
TYPES : BEGIN OF TY_EKKO,
        EBELN TYPE EKKO-EBELN,
        LIFNR TYPE EKKO-LIFNR,
        AEDAT TYPE EKKO-AEDAT,
        END OF TY_EKKO.
TYPES : BEGIN OF TY_EKPO,
        EBELP TYPE EKPO-EBELP,
        MATNR TYPE EKPO-MATNR,
        MENGE TYPE EKPO-MENGE,
        MEINS TYPE EKPO-MEINS,
        NETPR TYPE EKPO-NETPR,
        PEINH TYPE EKPO-PEINH,
        END OF TY_EKPO.
TYPES : BEGIN OF TY_LFA1,
        LIFNR TYPE LFA1-LIFNR,
        NAME1 TYPE LFA1-NAME1,
        LAND1 TYPE LFA1-LAND1,
        END OF TY_LFA1.
TYPES : BEGIN OF TY_MAKT,
        MATNR TYPE MARA-MATNR,
        MAKTX TYPE MAKT-MAKTX,
        END OF TY_MAKT.
DATA : IT_FINAL TYPE ZMEME_SSF,
        WA_FINAL TYPE ZMEME,
        IT_EKKO TYPE STANDARD TABLE OF TY_EKKO,
        IT_EKPO TYPE STANDARD TABLE OF TY_EKPO,
        IT_LFA1 TYPE STANDARD TABLE OF TY_LFA1,
        IT_MAKT TYPE STANDARD TABLE OF TY_MAKT,
        WA_EKKO TYPE TY_EKKO,
        WA_EKPO TYPE TY_EKPO,
        WA_MAKT TYPE TY_MAKT,
        WA_LFA1 TYPE TY_LFA1,
        SATURN TYPE RS38L_FNAM.
( Assume that u have got all the datas in your final internal table then ... )
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    FORMNAME                 = 'ZEBRA'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
   FM_NAME                  = SATURN
EXCEPTIONS
NO_FORM                  = 1
NO_FUNCTION_MODULE       = 2
OTHERS                   = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION SATURN
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    IT_SSF                     = IT_FINAL
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
All the best,
Cheers ...

Error while executing SSIS package - Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)

Hi,
We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
SQL Server Data Tools and SQL Server Database Engine reside on the same server.
We tried the following:
Disabling TCP Chimney Offload
Installed Windows Server 2008 SP1
Splitting our SSIS code into multiple steps so it is not all one large continuous operation
The error occurs during a BulkDataLoad task.
Other options we are investigating with the engineering team (out-sourced, so delayed responses):
Firewall configurations (everything is local, so this should not make a difference)
Disabling the anti-virus scanner
Are there other things we can try?
Any insight is greatly appreciated.
Thanks!

Hi HenryKwan,
Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
Set "RetainSameConnection" Property to FALSE on the all the connection managers.
Reference:
https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

While executing method getting error

Hai
i written method and and executed i got the error like as follow
see in that Date is assigning CHAR.
but not like happend , i not used any CHAR type so tell me what is reason behind that .
"SELECT * FROM "TASK_DETAILS" WHERE "TASK_RECEIPT_DATE" = '2008-09-24' ORDER BY 1,2" contains the semantics error[s]: - 1:34 - type check error: the left hand side >>"TASK_RECEIPT_DATE"<< (DATE) and the right hand side >>'2008-09-24'<< (CHAR) of a comparison operator are not comparable

You have used Char. You need to convert your char '2008-09-24- to a date. Have a look at the to_date function:
http://www.techonthenet.com/oracle/functions/to_date.php
m

Command not found error while executing shell programs in terminal

I have written one sample shell program.
while executing shell program in terminal,it shows COMMAND NOT FOUND error.
How to slove this.

Post the "Actual" error. It says more than command not found.
Post your script.
Post the output from:
echo $PATH
Post the output from:
which name_of_command_not_found

Error while executing SQL query -' Must Specify Table to select from'

Hi all,
While executing query using query generator
it shows error message
[Microsoft][SQL Native Client][SQL Server]Must specify table to select from.
2). [Microsoft][SQL Nativ
SELECT T1.ItemCode, T1.Dscription AS 'Item Description', T1.Quantity, T1.Price, T1.LineTotal,
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=-90 AND T1.LineNum=T2.LineNum) as 'BEDAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=-60 AND T1.LineNum=T2.LineNum) as 'ECSAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=7 AND T1.LineNum=T2.LineNum) as 'HECSAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=1 AND T1.LineNum=T2.LineNum) as 'VATAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=4 AND T1.LineNum=T2.LineNum) as 'CSTAmt'
FROM dbo.[OPCH] T0 INNER JOIN PCH1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN PCH4 T2 ON T2.DocEntry=T0.DocEntry
WHERE T0.DocDate >='[%0]' AND T0.DocDate <='[%1]' AND T0.DocType = 'I'
GROUP BY T1.ItemCode,T1.Dscription,T1.Quantity, T1.Price, T1.LineTotal,T0.DocEntry,T1.DocEntry,T1.LineNum,T2.LineNum
It's executing fine in MS SQL Server Studio Management.
Please give y'r ideas to solve the problem.
Jeyakanthan

try this, it works fine in my B1:
SELECT T1.ItemCode, T1.Dscription AS 'Item Description', T1.Quantity, T1.Price, T1.LineTotal,
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=-90 AND T1.LineNum=T2.LineNum) as 'BEDAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=-60 AND T1.LineNum=T2.LineNum) as 'ECSAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=7 AND T1.LineNum=T2.LineNum) as 'HECSAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=1 AND T1.LineNum=T2.LineNum) as 'VATAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=4 AND T1.LineNum=T2.LineNum) as 'CSTAmt'
FROM dbo.OPCH T0 INNER JOIN PCH1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN PCH4 T2 ON T2.DocEntry=T0.DocEntry
WHERE T0.DocDate >='[%0]' AND T0.DocDate <='[%1]' AND T0.DocType = 'I'
GROUP BY T1.ItemCode,T1.Dscription,T1.Quantity, T1.Price, T1.LineTotal,T0.DocEntry,T1.DocEntry,T1.LineNum,T2.LineNum
B1 don't like brackets!
Regards

Error occurred while Executing XL report

Hi,
I am getting the following error when i generate the XL report
<b>An error occurred while Executing report!
Description: Can't show non-modal form when modal form is displayed</b>
Regards,
Aravindhan.R

Hi!
You are probably editing a cell, if you exit the cell you are standing in (editing) the report should run properly

Error while executing the procedure

Hi,
I tried the following example it's compiled but while executing giving the errors
create or replace PROCEDURE createRZGSet (
        rNm IN VARCHAR2,
        rDsc IN VARCHAR2,
        rId OUT NUMBER
    ) IS
        cId INTEGER;
    BEGIN
        cId := 1;
        SELECT q_id.NEXTVAL
          INTO rId
          FROM DUAL;
        INSERT INTO t_set (rid,
r_nm,
r_dsc,
o_id,
flag)        VALUES (rId,rNm,rDsc,cid,'P');
    END;
/The above is compiled ... but while executing
SQL> declare
2   optval number;
3 begin
4   execute createRZGSet('myp','miyapur',optval);
5 dbms_output.put_line('val returned is:'||optval);
6 end;
7 /
execute createRZGSet('myp','miyapur',optval);
ERROR at line 4:
ORA-06550: line 4, column 10:
PLS-00103: Encountered the symbol "CREATERZGSet" when expecting one
of the following:
:= . ( @ % ; immediate
The symbol ":=" was substituted for "CREATERZGSet" to continue.could you please hint me in this error..
thanx

The above is compiled ... but while executing
SQL> declare
2   optval number;
3 begin
4   execute createRZGSet('myp','miyapur',optval);
5 dbms_output.put_line('val returned is:'||optval);
6 end;
7 /remove the execute key word. it belongs to SQL Plus. in pl/sql you can just give the procedure name thats enought.
SQL> declare
2   optval number;
3 begin
4   createRZGSet('myp','miyapur',optval);
5 dbms_output.put_line('val returned is:'||optval);
6 end;
7 /

Diadem runtime error while executing command "SchemeMeasStar"

Hello:
I used DIAdem9.0 and DAQCard6062E to acquire 16 channel data. I collected 65536 data for every channel. Whereas After the data acquisition stopped, an Error Message would poped up, but the data is still stored in data portal. the Error is like follows:
-Error- DIAdem
Runtime Error While Executing Command "SchemeMeasStar"
Error Type: UNKNOWN
Error Address:00001720
Module Name:GFSBase.Dll
Would you like to give me some suggestions?
thanks very much
jing

Dear MarcusP:
Thank you very much.
your solution really works. The attached is the detailed information of the problem. Would you like to tell me more about the prolem and how to solve the problem thoroughly.
Thank you very much.
yours
Jing
Attachments:
DIAdem_Error.doc ‏305 KB

Error while executing VC 7.1 Model

In my model i am submitting a input from FormView to a Webservice and displaying output in a table...But after clicking the Submit button getting a Error :
"Error occurred while executing the service: Error while getting the connection : Column Item does not exist"
Can anyone please tell me what the error is.

Hi,
First thing you need to do is check the log files for a more descriptive error message.
You can find instructions [following this link|http://help.sap.com/saphelp_nwce10/helpdata/en/f8/ebfe4ed55544e9bb1bf9dc8b3925f0/frameset.htm].
You may also have a look at this thread: Help with SOAP traces to deal with VC Problem where you can find information about setting the log level.
Regards,
Shai

While executing smartform FM error msg it shows

Similar Messages

Maybe you are looking for