While Executing the Sp in Query manager Getting Error.
hi.
i need a small information.
I Created a small table in Sql
ccode
varchar
no
250
cname
varchar
no
250
ctype
varchar
no
250
My Stored Procedure at Sql
i am inserting values in to the temporary table by using below one after passing the parameter
i am executing the parameter is
EXEC 'cardcode' ,'cardname' ,'c'
if i execute the stored procedure in sql values are inserting same thing i want to do in sap b1 at query maanger
USE [WCTBRPLDB21-05-2014]
GO
/****** Object: StoredProcedure [dbo].[uspGetAddress1] Script Date: 8/1/2014 4:07:20 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER Procedure [dbo].[uspGetAddress1]
@Cuscode varchar(250),
@customertName VARCHAR(250) ,
@custype varchar(250)
As
Begin
DECLARE @Cur_Product CURSOR
set @Cur_Product= cursor for select CardCode,CardName,CardType from ocrd where CardCode =@Cuscode and CardName= @customertName and cardtype =@custype
open @Cur_Product
fetch next
from @Cur_Product into @Cuscode,@customertName,@custype
while @@FETCH_STATUS = 0
begin
insert into custupdate (ccode,cname,ctype) values (@Cuscode,@customertName,@custype)
fetch next
from @Cur_Product into @Cuscode,@customertName,@custype
end
close @Cur_Product
deallocate @Cur_Product
select * from custupdate
End
@Cuscode varchar(250),
@customertName VARCHAR(250) ,
@custype varchar(250),
select @Cuscode = T0.CARDCODE from OCRD T0 where T0.CARDCODE = '[%01]' AND
select @CARDNAME = T0.CARDNAME from OCRD T0 where T0.CARDNAME = '[%02]' AND
select @CARDTYPE = T0.CARDTYPE from OCRD T0 where T0.CARDTYPE = '[%03]'
uspGetAddress1 @Cuscode ,@CARDNAME ,@CARDTYPE
The above one i pasted at query manager.
if i run it it is asking the parameters
but after execute it
i am getting the error that must declare the Scalar variable like that it is showing.
but i am all ready giving the scalar variable but it is not running.
Any information plz update me
is there any declaration problem in query manager.....................
Try below in query generator:
Declare @Cuscode varchar(250),
Declare @customertName VARCHAR(250) ,
Declare @custype varchar(250)
/*SELECT FROM [dbo].[OCRD] T0*/
/* WHERE */
SET @Cuscode = /* T0.CardCode */ '[%0]'
/*SELECT FROM [dbo].[OCRD] T0*/
/* WHERE */
SET @customertName = /* T0.CardName */ '[%1]'
/*SELECT FROM [dbo].[OCRD] T0*/
/* WHERE */
SET @custype = /* T0.CardType */ '[%2]'
EXEC uspGetAddress1 @Cuscode,@customertName,@custype
**Don't remove comments
Thanks
Navneet
Similar Messages
-
While deploying the BPEL Process I am getting Error.
I have BPEL Process "bpel_GetReSARMSJournalsToOracle_1.0.jar" and I am deploying this process via BPEL Console. While deploying this process I am getting the below error.
SelectReSARMSJournalsService.wsdl]: Error while setting JCA WSDL Property. Property setNumberOfThreads is not defined for oracle.tip.adapter.db.DBActivationSpec Please verify the spelling of the property.
Appreciate your help.
Thanks,
LeveyNot really sure but it sounds like it may be a JINDI DB Connection name not set on your bpel server, whatever DB adapter connection name you have in your local project make sure the name is the same and defined on the bpel server you are deploying to.
-
Error while executing the program 'RBDMIDOC'
Hi Experts,
While executing the program RBDMIDOC
I am getting the following errors
One error in Communication data :
1) No data distributed because of conversion errors
Two errors in Data selection and formatting :
1) No ISO code found for the country key NT in the field NATIO
2) Conversion error: infotype 0002, object 01,P,00000033
I am having change pointer entries in BDCP table.
Can anyone please tell me how to resolve these errors....
Thanks in advance...us the program
RHALEINI -
Error while executing the workbook query.
Hi guyz
i'm getting an error while executing the workbook Query. The actual problem is there is a filter for REQUID in the query definition for removing the doble count. there is customer exit written. the report works fine in DEVELOPMENT but it is not working in quality.
The query on which this workbook is created is working fine, but the problem is when we execute the workbook i'm facing this issue.
we re-transported the queries but still we are facing the same problem.
while we execute the query we are prompted for variable entry(Optional) for date. when we press OK we get the below error
" NO SID value found for the value REQU_4DQT75Y2RJPVT4PXZ4LHC70V3 of characteristic"
the request is not available in the BW system. the request was deleted long back, but it is still referring to the same the request id
could someone please tell me where we went wrong and why we are getting this error.
Regards,
Anil VaddeHey ,I think data load to your target on which the query was based had some issue.
Can you check the data load to the data target.change the status of request concerned to red and delete.do reconstruct if neeed..I think the request had some issue.
Even you can go to RSRQ or RSMO and filter on the basis of this request and see its status.
Regards,
RK -
Serious system error while executing the query: java.lang.OutOfMemoryError
From ALSB, we are trying to insert records in a table, by calling the ALDSP webservice. It is working fine when the xml (ie., given as input to the ALDSP webservice) is small. But facing the following error when the input xml size is large.
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space
We do not want to increase the heap size. Is there any other way we can solve this problem?In logical dataservice of ALDSP we have created a procedure called createTest, which is used to insert mulitple rows in the table. We have created a webservice for that logical DataService.
Using the ALSB, we are calling the webservice -> createTest Operation and we are passing xml as input to that createTest function.
Input xml:
<ns1:createTest>
<ns1:createTemps>
<ns0:createTemp>
<ns0:field1>1</ns0:field1>
<ns0:field10>test1</ns0:field10>
</ns0:createTemp>
<ns0:createTemp>
<ns0:field1>2</ns0:field1>
<ns0:field10>test2</ns0:field10>
</ns0:createTemp>
</ns1:createTemps>
</ns1:createTest>
each ns0:createTemp represent a row that need to be inserted in the table.
When the number of ns0:createTemp is less ( when the number of rows that need to be inserted is less) then no problem occurs, it is getting inserted properly. But when there are more number of ns0:createTemp then we are getting the following error
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space -
While executing the query the output is completey different from the query
Dear friends,
We built a query and loaded the data for that infoprovider.
While executing the query the output is completey different from the query what we have built.
Output has no relevance to the query.
Kindly help the same.
Regards,
SathyaHI Satya,
In my opinion the issue is with your front end.
Results should be identical in RSRT, BEx Analyzer (Workbooks) and the ABAP-Web since all three frontend tools use the "ABAP Runtime layer".
It may differ In the Portal where the new "Java Runtime layer". (Java-Web.) is used.
This is given in OSS Note 1296576 - Different Query Behaviour: ABAP - Java.
So i think the problem lies in your analyser. If you are using Analyzer: BI Add on 7.X (Based on 7.10) try and get support package 8.
Hope this helps.
Thanks,
Rahul -
While executing the query in the web template I am facing below issue
Hello SAP geniuses,
Please help me on my issue ,
while executing the query in the web template i am facing below issue.
The variable for characteristic (region) is appearing but this characteristic (region) is not appearing in the free characteristic zone but when we are executing the query with out webtemplate it is showing both variable and free characteristic
can anybody help us to identify what is the issue with the web template.
Thanks
AlokHi,
Plz check ur report and execute at the designer and take its technical name and go to RSRT. log out and log in and try..
if not check ur authorisation.
Regards....KP -
Getting a dump while executing the standard report BUSCHDOC
Hi,
I am getting a dump while executing the standard report BUSCHDOC.
I am specifying the following values:-
Application Object : BUPA
Business partner:<some business partner>
Changed on: <some date>
Changed by:<some userid>
Below are the dump details
Short text
CREATE DATA: The specified type "BUSSRCH_401BUPAT" is no valid data type.
Any suggestions to avoid the dump are welcome.
Thanks,
RavindraHi Ravindra,
Can you execute report BUP_BUSSRCHGF_REPAIR and try again ?
Also, go to transaction BUS10, click the button Geneate Selection. On next screen, give Application object = BUPA, Max no. of tables per view = 1.
Regards,
Rishu. -
While executing the Procedure Getting Error
Hi I am New to ODI.
I create one new Procedure just to delete the Target table.
delete from <%=snpRef.getTable("L","T_CUSTOMER","D")%>. T_Customer is my target table.Technology:Oracle(Both Source and Target)
I selected the correct Context ,Schema and Technology.
While executing the procedure i am getting following error
java.lang.Exception: Internal error: object ConnectConnection
ColConnectId:null
ColContextCode:DEV
ColConName:null
ColIndCommit:null
ColIsolLevel:null
ColLschemaName:null
ColPlanComp:null
ColTechIntName:null
DefConnectId:null
DefContextCode:DEV
DefConName:null
DefIndCommit:null
DefIsolLevel:null
DefLschemaName:FCS
DefPlanComp:null
DefTechIntName:ORACLE
ExeChannel:J
IndErr:1
IndLogMethod:null
IndLogNb:null
LogLevDet:3
Nno:1
OrdTrt:0
ScenTaskNo:1
SessNo:61001
TaskName1:Procedure
TaskName2:Delete
TaskName3:Delete
TaskType:S
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execSrcOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Thanks in advance.i Used the below syntax and checked its working fine.
delete from <%=snpRef.getObjectName("L","T_CUSTOMER","D")%> -
Issue While executing the Query for Pagination using ROWNUM with like
Issue While executing the Query for Pagination using ROWNUM with like.
Database is Oracle11G.
Oracle Database Table contains 8-9 lakh records
1) SQL equal (=)
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE A.REFERENCE = 'KMF22600920'
Execution Time:- 0.00869245 seconds
Returns 2 resultsets
2) SQL like (one %)
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE A.REFERENCE = 'KMF22600920%'
Execution Time:- 0.01094301 seconds
Returns 2 resultsets
3) SQL like (two%)
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE A.REFERENCE like '%KMF22600920%'
Execution Time:- 6.43989658 seconds
Returns 2 resultsets
In Pagination, we are using Modified version of SQL Query 3) with ROWNUM as mentioned below :-
4) SELECT * FROM (
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE REFERENCE like '%KMF22600920%' AND ROWNUM <= 20 ) WHERE RNUM > 0
Execution Time:- Infinite
ResultSets:- No as execution time is infinite
a) Instead of like if we use = in the above query it is returning the 2 resultsets (execution time 0.02699282 seconds)
b) Instead of two % in the above query, if use one example REFERENCE like 'KMF22600920%' it is returning the 2 resultsets (execution time 0.03313019 seconds)
Issue:- When using two % in like in the above query i.e. REFERENCE like '%KMF22600920%' AND ROWNUM <= 20 ) , it is going to infinite.
Could you please let us know what is the issue with two % used in like and rownum
5) Modified version of Option1 query (move out the RNUM condition AND RNUM <= 20)
SELECT * FROM (
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE REFERENCE like '%KMF22600920%' ) WHERE RNUM > 0 AND RNUM <= 20
Execution Time:- 7.41368914 seconds
Returns 2 resultsets
Is the above query is best optimized query which should be used for the Pagination or still can improve on this ?This would be easier to diagnose if there was an explain plan posted for the 'good' and 'bad' queries. Generally speaking using '%' on both sides precludes the use of any indexes.
-
While executing the following pl/sql block Iam getting following error
While executing the following pl/sql block
Iam getting following error
ORA-06550: line 5, column 11:
PLS-00320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 5, column 11:
PL/SQL: Item ignored
declare
TYPE t_customer_details IS REF CURSOR;
o_customer_details t_customer_details;
v_rec o_customer_details%ROWTYPE;
begin
o_customer_details:=pkg_search.fngetcustdetails( 2727,1000841, NULL,NULL,119105329);
LOOP
FETCH o_customer_details INTO rec ;
EXIT WHEN o_customer_details%NOTFOUND;
DBMS_OUTPUT.PUT_LINE(' print' );
END LOOP;
CLOSE o_customer_details;
end;sorry
declare
TYPE t_customer_details IS REF CURSOR;
o_customer_details t_customer_details;
begin
o_customer_details:= pkg_search.fngetcustdetails( 2727,1000841, NULL,NULL,119105329);
FOR v_rec IN o_customer_details
LOOP
DBMS_OUTPUT.PUT_LINE(' print' );
END LOOP;
END;I changed code,
Can you say , o_customer_details:= pkg_search.fngetcustdetails( 2727,1000841, NULL,NULL,119105329); is it right?
pkg_search.fngetcustdetails return ref cursor?? -
Hi,
While installing the sql server 2008 management studio I am getting the below error.
unhandled exception has occured in your application.if you click continue,the application will ignore this error and attempt to continue.if you click quit,the aplication will close immediatly.
An error occured creating the configuration section handler for userSettings/Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings:Could not load file or
assembly 'system.version=4.0.0.0. culture=neutral, publickey token=b77a5c561934e089' or one of its dependencies.the system cannot find the file supplied.
(C:\users\harsha\appdata\local\microsoft_corporation\landingpage.exe_strongname_ryspccglaxmt4nhllj5z3thycltsvyyx\10.0.0.0\user.config
and finally it is giving the options like continue and quit the installation.
So what do I do?
regards,
harsha.Hello,
Please try deleting the following sub folder to see if this will work:
C:\users\(my profile)\AppData\Local\Microsoft_Corporation
If you can't see AppData folder, you could use following steps to show hidden files:
1. Open an explorer window, hit "ALT-T" choose Folder Options then go to the view tab.
2. Turn on Show hidden files, folders or drives and
disable Hide protected Operating System files (recommended).
SQL Server 2008 setup fails with a Microsoft .NET Framework exception:
http://blogs.msdn.com/b/vsnetsetup/archive/2009/10/29/sql-server-2008-setup-fails-with-a-microsoft-net-framework-exception.aspx.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
While executing the t-code OMT3R getting error
Hi,
I am a basis consultant, one of my user getting the following error.
while executing the t-code OMT3R, he is getting the error "Do not make any changes (SAP entry)" (Message no. SV117).
His system configuration is :
SAP ECC6.0
SAP_ABA 700 0011 SAPKA70011
SAP_BASIS 700 0011 SAPKB70011
ST-PI 2005_1_700 0002 SAPKITLQI2
PI_BASIS 2005_1_700 0011 SAPKIPYJ7B
SAP_BW 700 0012 SAPKW70012
SAP_AP 700 0008 SAPKNA7008
LCAPPS 2005_700 0001 SAPKIBHD01
(LCAPPS) 2005_700
SAP_APPL 600 0008 SAPKH60008
can anybody tell me the cause of the problem. please give me a solution to the issue.
Thanks
Madhuri.Dear All,
The Issue has resoloved for Referec look in to the SAP_Note- SAP Note 162991
Thanks a lot for your great support on this issue. -
Error coming while executing the query in analyzer
HI,
Any body help me in this matter.
when i execute the qurey in bex its showing error message coming with popup box.
Error is showing like this.
"no value found"
" Exception 1 when calling WB_HTML_HELP_URL_GEToccured"
but when i click on "OK" button its showing result.can any body tell me why its showing error message like this .
regards
maheshHi ,
It happens because of the improper connectivity and configuration.In case of Web Reports so many pop ups will appear because of improper config..As long as you are getting the reports its ok,,,Should be taken care of Basis
Regards
Siva -
An unknown error occurred while executing the PowerShell script:
Hello all,
Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
to exit and go back into VMM in order to get anything else to run.
The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
An unknown error occurred while executing the PowerShell script:
The connection to the VMM management server scvmm2.mmmmmm.com was lost.
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Try the operation again. If the issue persists, contact Microsoft Help and Support.
ID: 27235
This is what I get in Events
Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
Log Name: Microsoft-Windows-PowerShell/Operational
Source: Microsoft-Windows-PowerShell
Date: 4/9/2015 3:27:04 PM
Event ID: 4100
Task Category: Executing Pipeline
Level: Warning
Keywords: None
User: mmmmmm\paufra
Computer: tools-francis.mmmmmm.com
Description:
Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Context:
Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
User Data:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
<EventID>4100</EventID>
<Version>1</Version>
<Level>3</Level>
<Task>106</Task>
<Opcode>19</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
<EventRecordID>285</EventRecordID>
<Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
<Execution ProcessID="2344" ThreadID="4076" />
<Channel>Microsoft-Windows-PowerShell/Operational</Channel>
<Computer>tools-francis.mmmmmm.com</Computer>
<Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
</System>
<EventData>
<Data Name="ContextInfo"> Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
</Data>
<Data Name="UserData">
</Data>
<Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
</Data>
</EventData>
</Event>Hi Sir,
First , please try to run the VMM configuration analyzer on that computer :
http://www.microsoft.com/en-us/download/details.aspx?id=41555
In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .
Maybe you are looking for
-
When Ipod touch plugged into computer
most of my purchased songs have gotten deleted! what should i do.... and how should i get my songs back?
-
Changing default value DropDownbyindex in wdinit in view
Hi everyone, I'm using drop down by index in a view. It has many values but I want to change default value. I think that I have to simulate an action on dropdownbykey like select a value. Can i retrieve the index of an element of nod passing his valu
-
Imapd is not able to start on the node
Hi all, I have following problem: When starting the messaging server with the start-msg the imapd can not start, this is the taken from the imapd log: [17/Apr/2009:02:53:40 +0800] mphgt34 imapd[12273]: General Critical: Fatal error: Cannot find IP ad
-
Today when trying to save my Captivate file I am getting the following error and it is topping at 50% complete.... "Failed to add file to zip 2 compressed_data/data-69329916406.cpd . Unknown exception. The save file might get corrupted. You should tr
-
I installed war file on the web logic server,after step 1,I press 'servicing all request' button for starting. unfortunately,I must repeat these action every time.The Application Server does not start project automatically. My WebLogic Application ve