While Posting Park Miro Document system asking Profit center.
Dear All,,
After Migo ,,we used all document should be Park ,After checking the Document we will post park Document.
While posting Park Document system give error massage "Balance field profit center is line item 001 not filled.
For this i check material master ,In Migo account assignment ,and in Cost center we assigned Profit center.But system still giving error,
here i am posting frieght invoice for we maintained in po itself...
What may be the reason i couldnt find ...Kindly guide me to overcome.
Thanks and Regards
Girish
Hi
Hope you are facing problem in MIRO document (not MIGO)
If so, the line item 001 of the MIRO document will normally be a vendor line item, where the system is asking you to enter profit center. So the logic of derving the profit center from material master/cost center does not work here.
But the message seems to be customized one, hence you can check in the validation rule or any BTE and modify the condition, so that it does not ask for Profit center in vendor line item.
Regards
Similar Messages
-
Error message while posting of miro document.
Dear All
While making posting of parked miro document following error msg coming u201CPlanned Delivery cost for PO u2013 7777777 , 00010 incorrectly defined. u201C
Pls. solve this issue.
Regards,
Vishal Kr. SharmaHai,
This problebm is software problem.u send it to sap authorities they can send a software .u can implement it, to post the document.
Regards,
V.Ramakrishnaparamahamsa
sap mm consultant -
Call transaction FB70 while posting the MIRO DOcument
Dear All,
My Requirement is , When ever the user posts a MIRO document for a particular PO document type, then automatically a customer invoice(FB70) has to posted automatically in the back end.
If there any BAdi or user-exits are there for the above requirement, please tell me.
Thanks In Advance.Thanks for your reply
yah....i have seen in PO in that VAT is V0 0% tax but if i went seen in withholding tax there is no amount in the withholding tax filed
Can please suggestion on the same
Reagrds
vamsi -
I am not able to post the MIRO Document with reference of PO
Hello friends
My user while posting the MIRO document TDS (service tax ) amount not appering in the MIRO screen
But last month it was working fine.
before that i have checked out vendor master in that they given tax code properly.
can any body please give me suggestion on the same
Regards
vamsi
Edited by: asuvamsi on Mar 2, 2010 4:53 PMHello friends
Thanks For all my problem was resloved
Solution is
An message has been occuring like withhold tax has been refreshed. it is just an information message not an error message. this message will trigger when the trans. type is non project type activity. No back end process has been disturbed due to this message. it just passing the information to the user.
we changed the trans. type to manufacturing activity and it is working fine.
I hope it ll help in future
Thanks and Regards
vamsi -
Posting the MIRO Document with reference of PO
Hello friends
while user posting the MIRO Document with reference of PO , he is getting difference in balance
Total amount is 31,237.00
Posting amount is 28,320.05
Balance amount is 2,916.95 this balance amount not getting post in MIRO
Before that i have seen GR amount is 28,320.05 but In IR amount same 28,320.05 but withholding tax tab not appering withholding tax amount
Can any body please help me on the same
Regards
sudharshana vamsi
Edited by: asuvamsi on Feb 24, 2010 1:43 PMHello friends
Thanks For all my problem was resloved
Solution is
An message has been occuring like withhold tax has been refreshed. it is just an information message not an error message. this message will trigger when the trans. type is non project type activity. No back end process has been disturbed due to this message. it just passing the information to the user.
we changed the trans. type to manufacturing activity and it is working fine.
I hope it ll help in future
Thanks and Regards
vamsi -
Issue while posting physical inventory document
Hi Team,
While posting a physical inventory document system is giving error message saying that
HU exists at another point in the warehouse. Clear the HU first
Message no. /SCWM/GM751
here is my scenario: As per the system bin is empty, while doing physical inventory we found and counted one HU in the same bin. while posting the same physical inventory document we are getting the above error message. as per the system this HU available in some other bin.
could you please let us know is there any process which i am missing before posting the PI document.
while posting the PI document is it not possible automatically HU get move from one bin to other bin?
Thanks
MastanHi kmastanrao
All above suggestion given need to check.
1. Check HU available in WH. In EWM monitor and HU details.
And after finding the status of HU and use as you need in your process.
second if needed I can provide HU table in EWM which can be used.
Regards
Suraj -
Error while Posting Physical Inv Document
Dear All,
While posting physical Inventory Document contains only 776 items only
i got this error
Maximum number of items in FI reached
Message no. F5727
Regards,
Pardeep MalikWhat did you do with the PID? did you modify to allow more than 333 items ?
as each item in a PID can create 3 entries in FI, the PID is limited to 333 items, because FI document can only take 999 items -
Document split by profit center
Hi,
We are in a re-implementation scenario.Client is using the older version of SAP and the new version is ECC 6.0.The requirement is to activate the document splitting with profit center and segment as scenarios.(Charecteristics for splitting).As on the cutoff date we take the balances and upload the same in the ECC 6.0 system.The question is how these balances will split.How the customer and vendor line items will split.
Please clarify...let me know if you need further info.
ThanksHello Aravind
Pls check this link
http://help.sap.com/saphelp_erp2004/helpdata/EN/87/3da04028f40160e10000000a1550b0/content.htm
Maybe of some help.
Reg
suresh -
Goods movement in a retail using document splitting by profit center
Hello Gurus,
I am in a retail implementation, our requirement is to make a goods moviment from one store to another (where stores are profit centers). But they want to have zero balance document spliting by profit center. (balances by store)
Does any one know how could the document finally be posted if the original movement is:
1000 goods 40 profit center 1
1000 goods 40 profit center 2
Thanks in advance,
answer will be rewarded!
AlexHello Aravind
Pls check this link
http://help.sap.com/saphelp_erp2004/helpdata/EN/87/3da04028f40160e10000000a1550b0/content.htm
Maybe of some help.
Reg
suresh -
Error while posting parked document
Hi all,
We are in ECC 5.0. While posting a parked invoice document, (created
through MIRO), the system is giving an error saying, 'Account XXXXXX
requires an assignment to a CO object . Msg. No. KI235) for Rounding off
account.
This G/L account has a cost center assigned in OKB9 and there is no
problem in the validity of the cost center and it is being displayed
when the document is simulated.
We are facing this problem only when posting a parked document.
While directly posting a document, there is no problem.
Any suggestions?
Regards,
Sundar RaoHi Paul,
The error is occuring when I am posting a parked invoice document. When I try and post it directly through MIRO, there is no problem.
I am unable to understand your reply. Can you please elaborate?
Regards,
Sundar Rao -
Error while posting parked documents
HI ALL,
After upgrade when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT"
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Please check it.
Thanks!Hi,
Please follow as given below:
1. Use T.Code KO31 and enter order and deactivate the control
2. Then try to post the parked document
3. And use T.Code KO30 and enter the order to activate the control
Some times system will check budget availability which already commited for parked documents.
Hope it will work.
Chandu -
Error while posting parked document in fbv0.
hi experts,
while posting a parked document in transaction fbvo the follwing information appears
and document is not posted.
Field WITH_DIALG-WT_BASE(2) is not an input field
message no 00347
Diagnosis
A transaction is processed using batch input.
System Response
The runtime error field xxx occurs (invalid entries)
Procedure
Correct the batch input data. Depending on the processing scenario, this can affect either of the following objects:
Batch input session
CATT procedure
Application program
regards
pankajHi
Do one transaction in foreground and check where system is giving error and correct it.
Thanks
GG -
Workflow is in error while posting parked document
Hi All,
I have implemented a workflow which will allow parking FI Documents via TC FV60 and then coding using FBV2 and then posting using
FM:PRELIMINARY_POSTING_POST_ALL.
While posting it came across a strange error
"No batch input data for screen SAPNF05A 0700 344 SAPMF05A"
This error has occured only once.
Can anyone shed any light on this?
Regards,
SheronNot related to WF. Refer to this note:
Note 49893 - Deactivating SKB1-XNKON for batch input and call transaction
Regards, IA -
Batch Posting of Parked MIRO Documents
How can we do the batch posting of the parked MIRO Documnets. We canot dot it using Tcode fbv0
Can you tell me how not to have the translation date updated when a parked document is finally posted. To clarify this, using MIRO and parking a document, then at another day posting the parked document. The field bkpf-wwert loses that first park date value, it gets overridden with the day the document was finally posted. This use to retain the park date when we were in 4.5b, since upgrading to 6.4, we seem to have this issue. Any help is appreciated. Regards, Theresa
Message was edited by: Theresa O'Neill-Rush -
Parking MIRO Document Without Vendor Information
Hi,
I am trying to park a miro document without the vendor information and only with the header information like date, posting and amount, however the system is not allowing me to do so. Its showing an error message M8696 - Enter invoicing party. I tried to change this error message from E to W in OMRM t.code but it looks like this message has been hard coded to an error message in the MIRO program so changing it from E to W in OMRM does not help here.
How can i park this document in this case without vendor information?Hi,
I want to park with the following details only :-
Invoice date
Posting date
Amount
Tax amount
This is the requirement from the user. Technically speaking since this is just a parking why can't the system allow parking?
Maybe you are looking for
-
Why is my "hide toolbar" in the View grayed out. I am not able to show the toolbar.
I cannot keep the Safari toolbar showing. The "Hide Toolbar" in the View tab is grayed out. Also, I cannot get the dock to not hide.
-
Create an URL attachment using FM SGOS_URL_CREATE_DIALOG
Hi all, i hope there is someone that can help me. My problem is: i've to create an URL attachment to an MM document in ME33K using a custom ABAP report. In my report i use FM SGOS_URL_CREATE_DIALOG but when i call ME33K and display the document i don
-
Error can't be transferred because file name is too long ...
Audio books and songs total of 53
-
Two Dynadocks on Mac - two VGA displays simultaneously?
I own two Dynadocks: PA3542EY1PRP and PA3541EY1PRP. They are connected to iMac 21 "Snow Leopard". All USB ports work but I can not run two VGA displays simultaneously. If one works, the other does not work. Drivers Display Links are updated. Surely t
-
Hi Guys, I have raise a doubt about null values in the 0requid. Currently, i have a cube that have been load, rollup and collapsed till a specif date and afterward only rollup have been done. In adition, the loads are deltas from an ods to this cube