While reset my iphone3G to factory setting it get stuck and couldn't start,i tried to restore it from i tune but its shows me error 1015 and couldn;t restore suggest me what to do.
PLz any body suggest me i had hanged up with my computer for last 3 day but couldn't solved it.
That article is universal, and not limited to iOS 4.x.
The phone is either jailbroken or has suffered a hardware failure.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state. Very rarely this error is caused by a hardware issue and requires service.
Similar Messages
-
my iphone get wet in water yesterday and back camera flash light get stucked, how can i recover it ? please help me ?
What happened is it got wet. Water and electronics don't go well together. You need to switch it off and bury it in bag of dry rice for a week at least. This may or may not work - but continuing to try to use it in its current state will kill it for sure. You can enquire at an Apple store about out-of-warranty replacement, depending on where you are.
-
my friend ipad 2 was stolen if they reset the device in factory setting,just wanna ask if we can still locate the device using find my iphone...mobileme?pls help me,...
It's unfortunate that your device has been stolen. You can report this to the police, but as has been answered before, if the device is restored you CANNOT locate it.
It probably is technically possible to track your device by the SIM; law enforcement will not waste their time doing so. Besides, the thieves have probably changed it anyway.
While unfortunate your iPad is gone, you really need to move on. -
I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it. -
After reset iphone 4 to factory setting, i can't charge my hp
Hi,
I resetted iphone 4 to factory setting so i can pass it to my brother since i brought a new iphone 5. But when my brother took over this iphone 4, he can't charged the iphone & it seems that the battery can't hold the power. Tried using both charger & USB, the same problem persisted. Does anybody experience such problom? thanks.
Regards,I tried that but I still got the message "Unable to verify account information." I saved it anyway and when I go to the Exchange email account it says "Cannot Get Mail" "The connection to the server failed." We are running Microsoft Exchange 2010 and I was always able to sync my calendar and email before I upgraded to IOS 6.
-
Reset Mountain lion to factory setting without cd
Reset Mountain lion to factory setting without cd
Use the recovery (hold Command + R keys at startup or restart) to wipe the drive and then reinstall.
Note: if you are planning to sell the Mac, be aware that you must sell it with the original OS reinstalled; any OS purchased at the app store is NOT transferable and will result in nothing but problems for the buyer as it is tied to your Apple ID. -
Hi, I have a iPhone 4S and I reset the phone to factory settings bcos the iTunes and AppStore didn't work. Now I can't get my phone to turn on
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W. -
Sharing set to allow editing and viewing. He can see what I enter. I can't see his entries. He sees his entries plus mine. I only see mine. This all worked fine a week ago.
I'm sorry to be so incredibly dense. The article to which you linked says:
"If the computer is already authorized, the item plays. If the computer has not yet been authorized, iTunes asks you to enter the Apple ID and password you used to purchase the song."
I can play songs from my husband's library. I can't drag them into my library.
If deauthorizing/authorizing is the solution, who needs to do what? We've got three computers and two iTunes accounts. -
MY I PHON 16GB TRYED TO TO RESET BUT I AM GETTING ERROR 1015, WITH RECOVERY MODE with itune sign, what should i do??
Not much you can do. Your phone is most likely permanently "bricked" Error 1015 occurs when trying to restore a previously jailbroken phone. This usually leaves the phone in a state where it can not be recovered as you are experiencing.
Discussion of jailbroken phones is prohibited by the Terms of Use of this forum. You'll have to get help elsewhere. Ask the lovely people who helped you jailbreak your phone. -
my iphone 5 is not finding any bluetooth divises. trying to connect to bluetooth hands free but its not searching the divice. what do i do to connect bluetooth headset.
have you tried toggling bluetooth off/on again? if so, try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
If that doesn't solve the issue, you could also try backing up the device and restoring the device as new.
In that case, follow the steps in: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup. If you still can't detect or pair with any compatible bluetooth device you should offer the device for service.
If you're not able to restore the device, this one might help: http://support.apple.com/kb/HT1808
Using his article will erase everything on the device, so make sure you have a backup!
Good luck -
HT1414 i m restoring my i phone but its showing error 3194. what to do? plz help
i trying to restore my i phone4 for factory settings. but its showing error3194 . what to do? how to trouble shoot
What OS prior to update? Jailbroken?
-
Hello
I was trying to by the app guitar party but i do not remember the answer to the security questions. What can I do ?You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(121015) -
I tried to restore my iPod touch4 but iTunes shows "This device isn't eligible for requested build" so what can I do ?
I tried this way to set up hosts and restart my Mac but when I going to restore my iPod touch4 ,it still shows "This device isn't eligible for requested build"
Thanks for replied me
if anyone has same problem to open their hosts file,here is a short video and you have to type "sudo nano /private/etc/hosts" ,not "sudo nano/private/etc/hosts",remember there is a space between "nano_/private"
This video helps a lot which I just found and it is much easier to fix this problem
https://www.youtube.com/watch?v=yHb1vdU6ReM -
i am running 10.8.5 trying to run 10.6 on vmfusion but its not working any suggestions/help? i get this same error
hummingbird.jeff wrote:
Hi Agan:
Yes indeed ddanielsun is encountering the same problem that led me to initiate this thread ... If you try to install any of the available 10.9.x from 10.6.8 the installer exits with an error "10.9 required for this update" ... seems strange that 10.9 is so very hard to find ! ! !
jeff
Clearly you can not update 10.9 if you do not have 10.9
It is very easy to find, it is in the App Store as the picture I posted earlier displays. Follow the same instructions. If you can't then use THIS LINK which will take you there.
The current version of 10.9 is 10.9.5 and that is what you will get. -
I am trying to buy gems in bubble mania but its telling me to go to the itunes store to complete the transaction. What should I do?
Could be you are not set up in iTunes for purchases within an App.
Maybe you are looking for
-
I am trying to install Oracle 8.1.6 on Linux 7.0 on an intel machine with 256MB RAM and 512MB swap. I have religiously followed all the steps in the installation manual except changing kernel parameters and recompiling- I am not comfortable with maki
-
Issue w/ param injectio and c:import
I'm experiencing a problem injecting a param into a request scoped backing bean while performing a JSTL import on a jsf page. A example of the task I am trying to do is the following... I have a page that imports another page: <f:subview id="idForReg
-
Pin images in Full Screen Slideshow???
I am using a full screen slideshow in Muse and it appears that all the images are proportionately resized with fill frame and pinned in the center. This means that if some of my images of people don't have the same general layout, some photos have he
-
Swf rollover in pdf not working
hello, i am working on a mac os x 10.6.5, i am using creative suite 4. i created an swf file with some basic functionality (rollover, dragging). then i import this file into an indesign file. from there i export it as a pdf (acrobat 9 pro) file. no f
-
Item using source, even though it's supposed to be only when null.
I have an interactive report on one page. When I click on the edit icon for a row, it successfully sets the value for the address id on the following page to the appropriate value from the row, let's say 8429. On the following page, there is an item,