While running "alter database create control.....".

oracle8i/windowsNT
got a very big tracefile(750kb).
at the end of file,desired script was there.,
Normally the size of tracefile would be 3kb.
"create controlfile....."
max_dump_file_size=10240
PLEASE CLARIFY
[email protected]
[email protected]

What's the content of this file ?
What's the exact command used?
Is it
ALTER DATABASE BACKUP CONTROLFILE TO TRACEOr
ALTER DATABASE CREATE STANDBY CONTROLFILE ...
"alter database create control.....". Is not correct syntax

Similar Messages

  • Alter database create datafile as

    Hi
    T1-)shutdown immediate;
    T2-)Take full backup
    T3-)startup;
    T4-)move the objects in tablespace test1 to some other tablespace
    T5-)drop tablespace test1;
    T6-)create tablespace test1
    datafile 'C:\oraclexe\oradata\XE\test1.dbf' reuse;
    T7-)alter system switch logfile;
    In some other server;
    startup nomount;
    restore the backupset which was taken at T2.
    restore controlfile at T7.
    startup mount;
    alter database create datafile 'C:\oraclexe\oradata\XE\test1.dbf' as 'C:\oraclexe\oradata\XE\test1.dbf';
    ALTER DATABASE RECOVER automatic database until cancel using backup controlfile;
    Recovery performed succefully.
    What I wanna ask is;
    Since First I issue:
    "alter database create datafile as ...."
    The contents of this datafile should be deleted with this statement.
    Why oracle doesnt give error in recovery, during appliying the statement at T4 ?
    I have already deleted the contents of the datafile, how come oracle move the objects?
    I hope I am clear

    Hi,
    although it is beyound my imagination what kind of real world scenario you are trying to simulate with your test, I can tell you why no error gets returned:
    You create a new tablespace t1 after you dropped the old one. That gets stored in the current controlfile. The previous backup of the datafile of the old tablespace that incidentally has the same name is now useless for the new tablespace.
    You then restore that controlfile and create the datafile manually as it looked after you created the new tablespace (empty) and then recover that. RMAN does that (without complaining even about the uselessness of your doing). If you look into that tablespace, you will see that it is empty as it was after you created it - unless you have put any objects into it after the second creation of that tablespace t1.
    Kind regards
    Uwe
    http://uhesse.wordpress.com

  • "VS_NEEDSNEWMETADATA" error while running a package created from C# code

    I have gone through most of the answers for similar questions here however none has resolved the issue. We have created a package using C# code which stages data from a source table to destination (ChildPackage.dtsx).
    Source Table : RowKey, Col1, Col2
    Destination Table : RowKey, Col1, Col2, RowID, RunID (RowID is an identity column in destination table and RunID is a derived column whose value is set using a variable)
    This package runs fine when we execute it directly however, we run these packages from a master package (MasterPackage.dtsx). When we are trying to run the package (ChildPackage) from a MasterPackage we get an error:
    [SSIS.Pipeline] Error: "Oledb Destination" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
    We have tried setting DelayValidation to true for the ChildPackage and even tried setting the values for "ValidateExternalMetadata" for the source and destination component as "False" for the data flow task
    of the ChildPackage.
    There is no case difference between column names in source and destination and it runs fine when we run the ChildPackage directly.
    The only additional task that the Master package performs is to generate and set a variable that is used as RunID value by the child package.
    If we hardcode the RunID in the ChildPackage and run it directly, it runs fine.
    The MasterPackage.dtsx is not created from code and has a step to run ChildPackage.dtsx. We generate the ChildPackage.dtsx from code and replace in original solution.
    Any help would be appreciated.
    Gaurav Agarwal

    Where then this RunID is consumed?
    Arthur My Blog
    The RunID is set by the MasterPackage in a parameter, this parameter is used as value of derived column in the data transformation task of the ChildPackage.
    As mentioned ChildPackage has a RunID column.
    Gaurav Agarwal

  • Error while running pw_agent_util.sh -create on golden gate instance

    ./pw_agent_util.sh -create Please create a password for Java Agent: Exception in thread "Thread-2" java.lang.NoClassDefFoundError: java.util.concurrent.TimeUnit
    at com.goldengate.wallet.PasswordMasker$StreamMasker.run(PasswordMasker.java:204)
    at java.lang.Thread.run(libgcj.so.7rh)
    password123 Please confirm password for Java Agent: Exception in thread "Thread-4" java.lang.NoClassDefFoundError: java.util.concurrent.TimeUnit
    at com.goldengate.wallet.PasswordMasker$StreamMasker.run(PasswordMasker.java:204)
    at java.lang.Thread.run(libgcj.so.7rh)
    password123 Please enter Monitor Server JMX password: Exception in thread "Thread-6" java.lang.NoClassDefFoundError: java.util.concurrent.TimeUnit
    at com.goldengate.wallet.PasswordMasker$StreamMasker.run(PasswordMasker.java:204)
    at java.lang.Thread.run(libgcj.so.7rh)
    jmxuser Please confirm Monitor Server JMX password: Exception in thread "Thread-8" java.lang.NoClassDefFoundError: java.util.concurrent.TimeUnit
    at com.goldengate.wallet.PasswordMasker$StreamMasker.run(PasswordMasker.java:204)
    at java.lang.Thread.run(libgcj.so.7rh)
    jmxuser
    Exception in thread "main" java.lang.UnsatisfiedLinkError: ggLog
    at com.goldengate.monitor.jagent.eventlog.JagentAppender.append(JagentAppender.java:53)
    at org.apache.log4j.AppenderSkeleton.doAppend(AppenderSkeleton.java:251)
    at org.apache.log4j.helpers.AppenderAttachableImpl.appendLoopOnAppenders(AppenderAttachableImpl.java:66)
    at org.apache.log4j.Category.callAppenders(Category.java:206)
    at org.apache.log4j.Category.forcedLog(Category.java:391)
    at org.apache.log4j.Category.error(Category.java:305)
    at com.goldengate.wallet.WalletHelper.open(WalletHelper.java:105)
    at com.goldengate.monitor.jagent.security.PWAgentUtil.main(PWAgentUtil.java:56)
    jagnet.log shows this error.
    2013-03-01 19:20:46 [main] ERROR WalletHelper - java.lang.ExceptionInInitializerError
    2013-03-01 19:20:46 [main] ERROR WalletHelper - java.lang.ExceptionInInitializerError
    ~

    Hi Joe,
    Thanks for the info.
    This is the error I am seeing in mgr report file.
    2013-03-12 21:49:59 INFO OGG-00975 JavaVMService::stop() shutdownClass.
    Source Context :
    SourceModule : [ggif.JavaVMActiveObject]
    SourceID : [net/ap1012nap-vlan900/vol/ifarm_ports/ifarm_views/aime_oggcore_59854/oggcore/OpenSys/src/gglib/ggif/JavaVMActiveObject.cpp]
    SourceFunction : [invokeJavaClassMethod]
    SourceLine : [400]
    ThreadBacktrace : [10] elements
    : [./mgr(CMessageContext::AddThreadContext()+0x26) [0x8231706]]
    : [./mgr(CMessageFactory::CreateMessage(CSourceContext*, unsigned int, ...)+0x817) [0x8227e57]]
    : [./mgr(_MSG_ERR_SHARED_LIB_GET_FUNCTION(CSourceContext*, char const*, char const*, char const*, CMessageFactory::MessageDisposition)+0x8b) [0x82019eb
    : [./mgr(ggs::gglib::ggif::JavaVMActiveObject::invokeJavaClassMethod(ggs::gglib::ggif::CReferenceCountedContext<std::string>&, ggs::gglib::ggif::CRefer
    enceCountedContext<std::string>&, ggs::gglib::ggif::CReferenceCountedContext<std::string>&, ggs::gglib::ggif::CReferenceCountedContext<std::string>&, ggs::gglib::ggif::CStatus&)
    +0x139) [0x82dbcc9]]
    : [./mgr(JavaVMService::stop(ggs::gglib::ggif::CStatus&)+0x722) [0x8135832]]
    : [./mgr(Manager::shutdown(ggs::gglib::ggif::CStatus&)+0x547) [0x8141487]]
    : [./mgr(new_main_loop(int, char**)+0xb04) [0x80ff474]]
    : [./mgr(main+0x105) [0x8104f65]]
    : [lib/libc.so.6(__libc_start_main+0xdc) [0x49ddee9c]]
    : [./mgr(__gxx_personality_v0+0x145) [0x80f0511]]
    2013-03-12 21:49:59 ERROR OGG-01123 Error loading function jvm from JNI_GetCreatedJavaVMs - ./mgr: undefined symbol: JNI_GetCreatedJavaVMs].
    2013-03-12 21:49:59 ERROR OGG-01668 PROCESS ABENDING.
    Here I am able to stop and start the MGR on other server with jdk1.7.0_15 with no errors.
    I will try to download the 1.6 version and try it on this server.
    Thanks,

  • Alter Database Create Datafile

    Hi Fellows,
    Can any body explain me if i dont have backup of datafile, how could i recover my database.
    I will appreciate sooner response.
    Thanks
    Mustafa

    Hi,
    The only way out is, if you have a export dump, you can get back the data till the time of export.
    Raghu.

  • AUDIT CREATE CONTROL FILE

    Hai
    how to set audit for CREATE CONTROL FILE?
    17:45:07 SQL> AUDIT CREATE CONTROL FILE;
    AUDIT CREATE CONTROL FILE
    ERROR at line 1:
    ORA-00969: missing ON keyword
    Whats the problem above statement?

    Hello;
    That sounds like an issue outside of Oracle ( OS? ). The listener logs might help.
    On your first question I check the alert log of my test database. It does not show control file creation, but it kind of a Chicken and the egg, with the database create.
    It does show standby information :
    Mon Jan 02 05:38:59 2012
    alter database create standby controlfile as 'STANDBY.ctl' Common audits
    audit grant any object privilege;
    audit create session;
    audit alter user;
    audit create user;
    audit drop user;
    audit drop tablespace;
    audit grant any role;
    audit grant any privilege;
    audit alter system;
    audit alter session;
    audit delete on AUD$ by access;
    audit insert on AUD$ by access;
    audit update on AUD$ by access;
    audit delete table;
    audit create tablespace;
    audit alter database;
    audit create role;
    audit create table;
    audit alter any procedure;
    audit create view;
    audit drop any procedure;
    audit drop profile;
    audit alter profile;
    audit alter any table;
    audit create public database link;Best Regards
    mseberg
    Edited by: mseberg on Jul 7, 2012 7:35 AM

  • Run a database without a dbf file

    Hi, can anybody help me? I need to run a database whose several (non sytem) dbf files are missing. There is NO backup. I only need access to the remaining dbf files but I cannot run the database. Can I replace the files with some kind of stubs? Thanks a lot.

    1. shutdown the database
    SQL> SHUTDOWN IMMEDIATE;
    If it's not working or hanging then
    SQL> SHUTDOWN ABORT;
    2. Startup the database in mount state
    SQL> STARTUP MOUNT;
    3. Find out the missing datafiles -
    select d.file#, d.status, d.enabled, d.create_bytes, d.name
    from v$recover_file r, v$datafile d
    where rf.file#=df.file# and rf.error = "FILE NOT FOUND"
    4. Create the datafiles (which were missed)
    SQL>- alter database create datafile '/path/filename.dbf' as '/path/filename.dbf' size xxx reuse;
    Note: Make sure that the path and size are the same )
    5. If the file is offline, then bring in online
    SQL> alter database datafile '/path/filename.dbf' online;
    6. Recover the database
    SQL> recover database;
    7. Open the database
    SQL> alter database open;
    If you have an access to metalink, please take a look at the Note ID: 1060605.6
    Regards,
    Sabdar Syed.

  • Error while Running backup

    Hi
    I have downloaded the Oracle Secure Backup Cloud Software and have installed the software for secure backup but while running Backup database command i am getting the below error. Any clue?
    RMAN> backup database;
    Starting backup at 30-APR-10
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of backup command at 04/30/2010 02:58:34
    ORA-19554: error allocating device, device type: SBT_TAPE, device name:
    ORA-27023: skgfqsbi: media manager protocol error
    ORA-19511: Error received from media manager layer, error text:
    KBHS-00715: HTTP error occurred 'internal-error'
    RMAN> show all
    2> ;
    RMAN configuration parameters are:
    CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
    CONFIGURE BACKUP OPTIMIZATION OFF; # default
    CONFIGURE DEFAULT DEVICE TYPE TO 'SBT_TAPE';
    CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # default
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
    CONFIGURE DEVICE TYPE 'SBT_TAPE' BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 4;
    CONFIGURE DEVICE TYPE DISK PARALLELISM 4 BACKUP TYPE TO BACKUPSET;
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' PARMS 'SBT_LIBRARY=/home/oracle/osbws/libosbws11.so ENV=(OSB_WS_PFILE=/home/oracle/osbws/osbws.cfg)';
    CONFIGURE MAXSETSIZE TO UNLIMITED; # default
    CONFIGURE ENCRYPTION FOR DATABASE ON;
    CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
    CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/mnt/database/dbtest/db/tech_st/10.2.0/dbs/snapcf_TEST.f'; # default
    Thanks
    Edited by: user6803831 on Apr 30, 2010 12:42 AM

    Hi,
    oraInst.loc (/etc/oraInst.loc) points to directory without permissions: /u01/app/oracle/oraInventoryPlease make sure that applmgr user has read/write/execute permission on the oraInventory directory.
    Please look in to the latest OUI log file located in the central inventory /clonehot/apps/inst/apps/PROD_apps/admin/oraInventory/logs/cloneActions_<timestamp> for more detailsAny details about the error in this log file?
    Thanks,
    Hussein

  • ORA-600 [17069] error while running catrelod.sql to downgrade 11g database

    Hi,
    We are downgrading our 11.2.0.2 database to 10.2.0.4. We have successfullly run catdwgrd.sql without any errors in 11g env. While running catrelod.sql in 10g env we are facing the following error:
    SQL> @?/rdbms/admin/catrelod.sql
    TIMESTAMP
    COMP_TIMESTAMP RELOD__BGN 2013-04-24 20:15:39 2456407 72939
    DOC>#######################################################################
    DOC>#######################################################################
    DOC>  The following statement will cause an "ORA-01722: invalid number"
    DOC>  error if the database server version is not 10.0.0.
    DOC>  Shutdown ABORT and use a different script or a different server.
    DOC>#######################################################################
    DOC>#######################################################################
    DOC>#
    no rows selected
    DOC>#######################################################################
    DOC>#######################################################################
    DOC>  The following statement will cause an "ORA-01722: invalid number"
    DOC>  error if the database has not been opened for MIGRATE.
    DOC>
    DOC>  Perform a "SHUTDOWN ABORT"  and
    DOC>  restart using MIGRATE.
    DOC>#######################################################################
    DOC>#######################################################################
    DOC>#
    no rows selected
    Session altered.
    Session altered.
    no rows selected
    DECLARE
    ERROR at line 1:
    ORA-00600: internal error code, arguments: [17069], [0x170FB8CA8], [], [], [],
    [], [], []I have checked the trace file in udump but it dint give any readable information.
    Please find below environment details.
    OS : RHEL 5 64 bit
    11g Database : 11.2.0.2
    10g Database : 10.2.0.4
    Kindly assist.

    KR10822864 wrote:
    Whenever an ORA-600 error is raised a trace file is generated and an entry written to the alert.log with details of the trace file location. Starting with Oracle Database 11g Release 1, the diagnosability infrastructure was introduced which places the trace and core files into a location controlled by the DIAGNOSTIC_DEST initialization parameter when an incident, such as an ORA-600 is created. For earlier versions, the trace file will be written to either USER_DUMP_DEST (if the error was caught in a user process) or BACKGROUND_DUMP_DEST (if the error was caught in a background process like PMON or SMON). The trace file contains vital information about what led to the error condition
    please post 40 lines of alert log info .
    MOS Note:ORA-600 [17069] "Failed to pin a library cache object after 50 attempts" [ID 39616.1]
    "Look in the trace file for the text 'LIBRARY OBJECT HANDLE: handle=170fb8ca8'"
    if not found any massages like above please raise [email protected].
    Hi KR,
    Thanks for your help. As suggested I have checked the trace file to search and found the below info. I suppose it is some kind of lock but not sure about it. Please let me know if the following makes sense:
        SO: 0x21158a6e0, type: 3, owner: 0x211006f28, flag: INIT/-/-/0x00
        (call) sess: cur 211572570, rec 211572570, usr 211572570; depth: 0
          SO: 0x21158a9b8, type: 3, owner: 0x21158a6e0, flag: INIT/-/-/0x00
          (call) sess: cur 211572570, rec 0, usr 211572570; depth: 1
            SO: 0x1727a2618, type: 54, owner: 0x21158a9b8, flag: INIT/-/-/0x00
            LIBRARY OBJECT PIN: pin=1727a2618 handle=170fb8ca8 mode=S lock=171243e98
            user=211572570 session=211572570 count=1 mask=001d savepoint=0x43 flags=[00]
            SO: 0x171243e98, type: 53, owner: 0x21158a9b8, flag: INIT/-/-/0x00
            LIBRARY OBJECT LOCK: lock=171243e98 handle=170fb8ca8 mode=S
            call pin=0x1727a2618 session pin=(nil) hpc=0000 hlc=0000
            htl=0x171243f18[0x17278a310,0x17278a310] htb=0x17278a310 ssga=0x172789928
            user=211572570 session=211572570 count=1 flags=PNC/[0400] savepoint=0x43
            LIBRARY OBJECT HANDLE: handle=170fb8ca8 mtx=0x170fb8dd8(0) cdp=0
            name=SYS.STANDARD
            hash=51570e225ed8a9a803b7318f191e0a8d timestamp=04-18-2006 00:00:00
            namespace=TABL flags=KGHP/TIM/SML/[02000000]
            kkkk-dddd-llll=0000-001d-001d lock=S pin=S latch#=3 hpc=0004 hlc=0004
            lwt=0x170fb8d50[0x170fb8d50,0x170fb8d50] ltm=0x170fb8d60[0x170fb8d60,0x170fb8d60]
            pwt=0x170fb8d18[0x170fb8d18,0x170fb8d18] ptm=0x170fb8d28[0x170fb8d28,0x170fb8d28]
            ref=0x170fb8d80[0x170fb8d80,0x170fb8d80] lnd=0x170fb8d98[0x170f05b50,0x170fa6858]
              LIBRARY OBJECT: object=170e82de8
              type=PCKG flags=EXS/LOC[0005] pflags=NST/IVR[0201] status=VALD load=0
              DATA BLOCKS:
              data#     heap  pointer    status pins change whr
                  0 170e831f8 170e82fc0 I/P/A/-/-    0 NONE   00
          SO: 0x21158e470, type: 5, owner: 0x21158a6e0, flag: INIT/-/-/0x00
          (enqueue) CU-70E88BC0-00000001    DID: 0001-001F-00000004
          lv: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  res_flag: 0x2
          res: 0x17677adc8, mode: X, lock_flag: 0x0
          own: 0x211572570, sess: 0x211572570, proc: 0x211006f28, prv: 0x17677add8
          SO: 0x177f82c28, type: 59, owner: 0x21158a6e0, flag: INIT/-/-/0x00
          cursor enqueue
          child: 170e89348, flag: 53, number: 0
          parent: 170e89738

  • Error while running adcfgclone on database tier please help me

    Hello
    I am doing cloning through cold backup and i face some errors..here is my logfile.....please suggest me some solution...
    Executing script in InstantiateFile:
    Attempting to create a back up of the Context file
    Created back up file of name :
    /home/clone/db/db/tech_st/10.2.0/appsutil/out/CLONE_zishan/12071920/CLONE_zishan.xml
    ===========================================================================
    Starting synchronization of file system Context file and its templates with those in the database
    Database connection : Failed
    OAM Context editing support feature: Unverified
    OAM Customization support feature : Unverified
    File system template : /home/clone/db/db/tech_st/10.2.0/appsutil/template/adxdbctx.tmp
    Checking for customizations to Context template
    Warning: Unable to connect to Database.
    If the system is OAM enabled, this may result in loss of customizations.
    Looking for custom template at : /home/clone/db/db/tech_st/10.2.0/appsutil/template/custom/adxdbctx.tmp
    Custom template : Not available
    Customizations found : None
    File system Context file :/home/clone/db/db/tech_st/10.2.0/appsutil/CLONE_zishan.xml
    Checking the Context file for possible updates from the Database
    Warning: Unable to connect to Database.
    If the system is OAM enabled, this may result in loss of customizations and the Context files in DataBase and in the file system may be unsynchronized
    ===========================================================================
    Starting Updates of Context file Tue Dec 07 19:20:41 GMT+05:30 2010
    found context version : 120.27
    available update version : 120.27
    No updates to apply
    Ending Updates of Context file
    ===========================================================================
    ===========================================================================
    Starting Context Value Management System at Tue Dec 07 19:20:41 GMT+05:30 2010
    Using version 120.8
    Options:
    Force : no
    Contextfile : /home/clone/db/db/tech_st/10.2.0/appsutil/CLONE_zishan.xml
    Templatefile : /home/clone/db/db/tech_st/10.2.0/appsutil/template/adxdbctx.tmp
    ValueUpdateFile : /home/clone/db/db/tech_st/10.2.0/appsutil/template/adcvmdb.xml
    Verifying value management system requirements:
    ContextFile : VALID
    Template File : VALID
    ValueUpdateFile : VALID
    Parsing the ValueUpdateFile
    [ s_contextfile ]
    Action : seed
    Change reason : Setting the location to what has been specified by user
    New value : /home/clone/db/db/tech_st/10.2.0/appsutil/CLONE_zishan.xml
    ===========================================================================
    [ Config tool : /home/clone/db/db/tech_st/10.2.0/appsutil/bin/adgentns.pl ]
    Command : /home/clone/db/db/tech_st/10.2.0/perl/bin/perl -I /home/clone/db/db/tech_st/10.2.0/perl/lib/5.8.3 -I /home/clone/db/db/tech_st/10.2.0/perl/lib/site_perl/5.8.3 -I /home/clone/db/db/tech_st/10.2.0/appsutil/perl /home/clone/db/db/tech_st/10.2.0/appsutil/bin/adgentns.pl PASSWORD contextfile=/home/clone/db/db/tech_st/10.2.0/appsutil/CLONE_zishan.xml logdir=/home/clone/db/db/tech_st/10.2.0/appsutil/log/CLONE_zishan
    Action : execute
    SCRIPT RETURNED:
    Generate Tns Names
         Classpath : /home/clone/db/db/tech_st/10.2.0/jdbc/lib/ojdbc14.jar:/home/clone/db/db/tech_st/10.2.0/appsutil/java/xmlparserv2.jar:/home/clone/db/db/tech_st/10.2.0/appsutil/java:/home/clone/db/db/tech_st/10.2.0/jlib/netcfg.jar:/home/clone/db/db/tech_st/10.2.0/jlib/ldapjclnt10.jar
    Loading ORACLE_HOME environment from /home/clone/db/db/tech_st/10.2.0
    Logfile: /home/clone/db/db/tech_st/10.2.0/appsutil/log/CLONE_zishan/NetServiceHandler.log
    Error generating tnsnames.ora from the database, temperory tnsnames.ora will be generated using templates
    Instantiating templates
    tnsnames.ora instantiated
    listener.ora instantiated
    adgentns.pl exiting with status 25600
    ERRORCODE = 25600 ERRORCODE_END
    .end std out.
    .end err out.
    Result : FAILED
    ===========================================================================
    Ending Context Value Management System.
    ===========================================================================
    ===========================================================================
    No uploading of Context file and its templates to database. Database conection failed
    ===========================================================================
    Finished running CVM.....
    Processing DriverFile = /home/clone/db/db/tech_st/10.2.0/appsutil/template/addbtmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for AppsUtil
    Looking for the directory : /home/clone/db/db/tech_st/10.2.0/nls/data/9idata
    Directory exists
    Looking for file : /home/clone/db/db/tech_st/10.2.0/nls/data/old/cr9idata.pl
    File exists
    Validation complete
    ERRORCODE = 0 ERRORCODE_END
    .end std out.
    .end err out.
    AutoConfig Setup Phase
    Running Setup Process 2 of 3 for AppsUtil
    Executing script in InstantiateFile:
    /home/clone/db/db/tech_st/10.2.0/perl/bin/perl -I /home/clone/db/db/tech_st/10.2.0/perl/lib/5.8.3 -I /home/clone/db/db/tech_st/10.2.0/perl/lib/site_perl/5.8.3 -I /home/clone/db/db/tech_st/10.2.0/appsutil/perl /home/clone/db/db/tech_st/10.2.0/appsutil/install/CLONE_zishan/txkConfigDbOcm.pl
    script returned:
    Checking if OCM is already configured in: /home/clone/db/db/tech_st/10.2.0
    OCM is not yet configured in: /home/clone/db/db/tech_st/10.2.0
    The values for MetaLink ID, CSI and Country Code are not all specified. OCM cannot be configured.
    ERRORCODE = 0 ERRORCODE_END
    .end std out.
    .end err out.
    AutoConfig Setup Phase
    Running Setup Process 3 of 3 for AppsUtil
    Executing script in InstantiateFile:
    /home/clone/db/db/tech_st/10.2.0/appsutil/install/CLONE_zishan/afmkinit.sh
    script returned:
    afmkinit.sh started at Tue Dec 7 19:21:09 IST 2010
    The environment settings are as follows ...
    ORACLE_HOME : /home/clone/db/db/tech_st/10.2.0
    ORACLE_SID : CLONE
    TWO_TASK :
    PATH : /home/clone/db/db/tech_st/10.2.0/perl/bin:/home/clone/db/db/tech_st/10.2.0/bin:/usr/bin:/usr/sbin:/home/clone/db/db/tech_st/10.2.0/appsutil/jre/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/home/clone/db/db/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/home/clone/db/db/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/usr/lib/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle1/bin
    Library Path : /home/clone/db/db/tech_st/10.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/home/clone/db/db/tech_st/10.2.0/lib:/usr/dt/lib:/home/clone/db/db/tech_st/10.2.0/ctx/lib
    afmkinit.sh exiting with status 0
    .end std out.
    .end err out.
    Skipping Profile Phase
    Skipping Apply Phase
    Starting DB listener with command:
    /home/clone/db/db/tech_st/10.2.0/appsutil/scripts/CLONE_zishan/addlnctl.sh start CLONE
    You are running addlnctl.sh version 120.1
    Logfile: /home/clone/db/db/tech_st/10.2.0/appsutil/log/CLONE_zishan/addlnctl.txt
    Starting listener process CLONE ...
    addlnctl.sh: exiting with status 0
    .end std out.
    .end err out.
    checking DB Connection...
    DEBUG: checkDBConnection in()
    ADX Database Utility
    getConnection() -->
    sDbHost : zishan
    sDbDomain : mahesh.dba
    sDbPort : 1541
    sDbSid : CLONE
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@zishan.mahesh.dba:1541:CLONE
    Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux Error: 2: No such file or directory
    Trying to connect using SID as ServiceName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=zishan.mahesh.dba)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=CLONE)))
    Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux Error: 2: No such file or directory
    Trying to connect using SID as ServiceName.DomainName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=zishan.mahesh.dba)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=CLONE.mahesh.dba)))
    Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
    ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
    The Connection descriptor used by the client was:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=zishan.mahesh.dba)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=CLONE.mahesh.dba)))
    Connection could not be obtained; returning null
    -------------------ADX Database Utility Finished---------------
    DEBUG: checkDBConnection out()
    Verifying correctness of adcrdbclone.sql
    Clustered Database: false
    Instantiating /home/clone/db/db/tech_st/10.2.0/appsutil/template/adcrdbclone.sql to /home/clone/db/db/tech_st/10.2.0/appsutil/install/CLONE_zishan/adcrdbclone.sql.bak
    instantiate file:
    source : /home/clone/db/db/tech_st/10.2.0/appsutil/template/adcrdbclone.sql
    dest : /home/clone/db/db/tech_st/10.2.0/appsutil/install/CLONE_zishan/adcrdbclone.sql.bak
    Instantiating /home/clone/db/db/tech_st/10.2.0/appsutil/install/CLONE_zishan/adcrdbclone.sql.bak to /home/clone/db/db/tech_st/10.2.0/appsutil/install/CLONE_zishan/adcrdbclone.sql
    instantiate file:
    source : /home/clone/db/db/tech_st/10.2.0/appsutil/install/CLONE_zishan/adcrdbclone.sql.bak
    dest : /home/clone/db/db/tech_st/10.2.0/appsutil/install/CLONE_zishan/adcrdbclone.sql
    Updating:s_db_rollback_segs:(_syssmu1$, syssmu2$, syssmu3$, syssmu4$, syssmu5$, syssmu6$, syssmu7$, syssmu8$, syssmu9$, syssmu10$, syssmu11$, syssmu12$, syssmu13$, syssmu14$, syssmu15$):
    Updating:s_undo_tablespace:APPS_UNDOTS1:
    Updating:s_database:db102:
    Updating:isspfileexists:false:
    Updating:s_dbfiles:512:
    Executing Configuration Phase...
    Deleting files of type INSTALL
    Checking for file: /home/clone/db/db/tech_st/10.2.0/network/admin/CLONE_zishan/sqlnet.ora
    Processing driver file: /home/clone/db/db/tech_st/10.2.0/appsutil/template/addbtmpl.drv
    Checking for file: /home/clone/db/db/tech_st/10.2.0/dbs/initCLONE.ora
    File exists
    File deleted
    Checking for file: /home/clone/db/db/tech_st/10.2.0/network/admin/CLONE_zishan/listener.ora
    File exists
    File deleted
    Checking for file: /home/clone/db/db/tech_st/10.2.0/network/admin/CLONE_zishan/tnsnames.ora
    File exists
    File deleted
    Processing DriverFile = /home/clone/db/db/tech_st/10.2.0/appsutil/template/addbtmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for AppsUtil
    AutoConfig Setup Phase
    Running Setup Process 2 of 3 for AppsUtil
    Executing script in InstantiateFile:
    /home/clone/db/db/tech_st/10.2.0/perl/bin/perl -I /home/clone/db/db/tech_st/10.2.0/perl/lib/5.8.3 -I /home/clone/db/db/tech_st/10.2.0/perl/lib/site_perl/5.8.3 -I /home/clone/db/db/tech_st/10.2.0/appsutil/perl /home/clone/db/db/tech_st/10.2.0/appsutil/install/CLONE_zishan/txkConfigDbOcm.pl
    script returned:
    Checking if OCM is already configured in: /home/clone/db/db/tech_st/10.2.0
    OCM is not yet configured in: /home/clone/db/db/tech_st/10.2.0
    The values for MetaLink ID, CSI and Country Code are not all specified. OCM cannot be configured.
    ERRORCODE = 0 ERRORCODE_END
    .end std out.
    .end err out.
    AutoConfig Setup Phase
    Running Setup Process 3 of 3 for AppsUtil
    Executing script in InstantiateFile:
    /home/clone/db/db/tech_st/10.2.0/appsutil/install/CLONE_zishan/afmkinit.sh
    script returned:
    afmkinit.sh started at Tue Dec 7 19:21:26 IST 2010
    The environment settings are as follows ...
    ORACLE_HOME : /home/clone/db/db/tech_st/10.2.0
    ORACLE_SID : CLONE
    TWO_TASK :
    PATH : /home/clone/db/db/tech_st/10.2.0/perl/bin:/home/clone/db/db/tech_st/10.2.0/bin:/usr/bin:/usr/sbin:/home/clone/db/db/tech_st/10.2.0/appsutil/jre/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/home/clone/db/db/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/home/clone/db/db/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/usr/lib/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle1/bin
    Library Path : /home/clone/db/db/tech_st/10.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/home/clone/db/db/tech_st/10.2.0/lib:/usr/dt/lib:/home/clone/db/db/tech_st/10.2.0/ctx/lib
    afmkinit.sh exiting with status 0
    .end std out.
    .end err out.
    Skipping Profile Phase
    Skipping Apply Phase
    Executing CreateDB...
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : zishan
    sDbDomain : mahesh.dba
    sDbPort : 1541
    sDbSid : CLONE
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@zishan.mahesh.dba:1541:CLONE
    Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux Error: 2: No such file or directory
    Trying to connect using SID as ServiceName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=zishan.mahesh.dba)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=CLONE)))
    Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux Error: 2: No such file or directory
    Trying to connect using SID as ServiceName.DomainName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=zishan.mahesh.dba)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=CLONE.mahesh.dba)))
    Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
    ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
    The Connection descriptor used by the client was:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=zishan.mahesh.dba)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=CLONE.mahesh.dba)))
    Connection could not be obtained; returning null
    -------------------ADX Database Utility Finished---------------
    adcrdb.sh started at Tue Dec 7 19:21:27 IST 2010
    The environment settings are as follows ...
    ORACLE_HOME : /home/clone/db/db/tech_st/10.2.0
    ORACLE_SID : CLONE
    TWO_TASK :
    PATH : /home/clone/db/db/tech_st/10.2.0/perl/bin:/home/clone/db/db/tech_st/10.2.0/bin:/usr/bin:/usr/sbin:/home/clone/db/db/tech_st/10.2.0/appsutil/jre/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/home/clone/db/db/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/home/clone/db/db/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/usr/lib/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle1/bin
    LD_LIBRARY_PATH : /home/clone/db/db/tech_st/10.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/home/clone/db/db/tech_st/10.2.0/lib:/usr/dt/lib:/home/clone/db/db/tech_st/10.2.0/ctx/lib
    Executable : /home/clone/db/db/tech_st/10.2.0/bin/sqlplus
    The log information will be written to
         /home/clone/db/db/tech_st/10.2.0/appsutil/log/CLONE_zishan/adcrdb_CLONE.txt
    Creating the control file for CLONE_zishan database ...
    SQL*Plus: Release 10.2.0.2.0 - Production on Tue Dec 7 19:21:27 2010
    Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
    Connected to an idle instance.
    ORACLE instance shut down.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 1073741824 bytes
    Fixed Size          1264892 bytes
    Variable Size          427819780 bytes
    Database Buffers     633339904 bytes
    Redo Buffers          11317248 bytes
    CREATE CONTROLFILE REUSE SET DATABASE "CLONE"
    ERROR at line 1:
    ORA-01503: CREATE CONTROLFILE failed
    ORA-00200: control file could not be created
    ORA-00202: control file: '/home/clone/db/db/apps_st/data/cntrl01.dbf'
    ORA-27086: unable to lock file - already in use
    Linux Error: 11: Resource temporarily unavailable
    Additional information: 8
    Additional information: 30389
    alter database open resetlogs
    ERROR at line 1:
    ORA-01507: database not mounted
    alter tablespace TEMP1 add tempfile '/home/clone/db/db/apps_st/data/temp01.dbf' REUSE
    ERROR at line 1:
    ORA-01109: database not open
    alter tablespace TEMP2 add tempfile '/home/clone/db/db/apps_st/data/temp02.dbf' REUSE
    ERROR at line 1:
    ORA-01109: database not open
    ALTER DATABASE RENAME GLOBAL_NAME TO "CLONE.mahesh.dba"
    ERROR at line 1:
    ORA-01109: database not open
    ORA-01507: database not mounted
    ORACLE instance shut down.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 1073741824 bytes
    Fixed Size          1264892 bytes
    Variable Size          427819780 bytes
    Database Buffers     633339904 bytes
    Redo Buffers          11317248 bytes
    ORA-00205: error in identifying control file, check alert log for more info
    BEGIN dbms_backup_restore.zeroDbid(0); END;
    ERROR at line 1:
    ORA-00210: cannot open the specified control file
    ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4168
    ORA-06512: at line 1
    ORACLE instance shut down.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 1073741824 bytes
    Fixed Size          1264892 bytes
    Variable Size          427819780 bytes
    Database Buffers     633339904 bytes
    Redo Buffers          11317248 bytes
    CREATE CONTROLFILE REUSE SET DATABASE "CLONE"
    ERROR at line 1:
    ORA-01503: CREATE CONTROLFILE failed
    ORA-00200: control file could not be created
    ORA-00202: control file: '/home/clone/db/db/apps_st/data/cntrl01.dbf'
    ORA-27086: unable to lock file - already in use
    Linux Error: 11: Resource temporarily unavailable
    Additional information: 8
    Additional information: 30389
    alter database open resetlogs
    ERROR at line 1:
    ORA-01507: database not mounted
    alter tablespace TEMP1 add tempfile '/home/clone/db/db/apps_st/data/temp01.dbf' REUSE
    ERROR at line 1:
    ORA-01109: database not open
    alter tablespace TEMP2 add tempfile '/home/clone/db/db/apps_st/data/temp02.dbf' REUSE
    ERROR at line 1:
    ORA-01109: database not open
    ALTER DATABASE RENAME GLOBAL_NAME TO "CLONE.mahesh.dba"
    ERROR at line 1:
    ORA-01109: database not open
    Error Running create/replace library with adupdlib.sql
    ORA-01109: database not open
    PL/SQL procedure successfully completed.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    exit_code=0
    Checking for errors ...
    The database has not been successfully created. Shutting down the instance ...
    SQL*Plus: Release 10.2.0.2.0 - Production on Tue Dec 7 19:21:33 2010
    Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
    Connected.
    ORACLE instance shut down.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    .end std out.
    .end err out.
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : zishan
    sDbDomain : mahesh.dba
    sDbPort : 1541
    sDbSid : CLONE
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@zishan.mahesh.dba:1541:CLONE
    Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux Error: 2: No such file or directory
    Trying to connect using SID as ServiceName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=zishan.mahesh.dba)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=CLONE)))
    Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux Error: 2: No such file or directory
    Trying to connect using SID as ServiceName.DomainName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=zishan.mahesh.dba)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=CLONE.mahesh.dba)))
    Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
    ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
    The Connection descriptor used by the client was:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=zishan.mahesh.dba)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=CLONE.mahesh.dba)))
    Connection could not be obtained; returning null
    -------------------ADX Database Utility Finished---------------
    RC-00118: Error occurred during creation of database
    Raised by oracle.apps.ad.clone.ApplyDatabase

    Hi;
    What is EBS and Db,OS?
    ERROR at line 1:
    ORA-01503: CREATE CONTROLFILE failed
    ORA-00200: control file could not be created
    ORA-00202: control file: '/home/clone/db/db/apps_st/data/cntrl01.dbf'
    ORA-27086: unable to lock file - already in use
    Linux Error: 11: Resource temporarily unavailable
    Additional information: 8
    Additional information: 30389home/clone/db/db/apps_st/data/cntrl01.dbf' This file exsits? If yes you have r/w permission?
    alter database open resetlogs
    ERROR at line 1:
    ORA-01507: database not mounted
    alter tablespace TEMP1 add tempfile '/home/clone/db/db/apps_st/data/temp01.dbf' REUSE
    ERROR at line 1:
    ORA-01109: database not open
    alter tablespace TEMP2 add tempfile '/home/clone/db/db/apps_st/data/temp02.dbf' REUSE
    *Did you run preclone on source before copy file to target?
    Regard
    Helios

  • 11i RW-50004 while creating control file...

    Dear all,
    Kindly let me know what this log file sys...
    I am trying to install 11i on OEL4.6 with 2GB RAM in VMware for Important test purpose. While creating control file in second stage i am getting this Error:,,
    RW-50004 : Error code received when running external process.
    Check log file for details.
    I have check ORALCEHOME/appsutil/log/SID/04270524.log
    Please let me know this error.
    Regards
    GAZA
    Creating the control file for abc_apps11i database ...+
    SQLPlus: Release 9.2.0.5.0 - Production on Fri Apr 27 06:23:10 2012*+
    Copyright (c) 1982, 2002, Oracle Corporation.  All rights reserved.+
    ERROR:+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    ERROR:+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    SP2-0640: Not connected+
    SP2-0640: Not connected+
    SP2-0640: Not connected+
    SP2-0640: Not connected+
    ORA-01012: not logged on+
    ERROR:+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    SP2-0640: Not connected+
    SP2-0641: "EXECUTE" requires connection to server+
    ORA-01031: insufficient privileges+
    ERROR:+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    SP2-0640: Not connected+
    SP2-0640: Not connected+
    SP2-0640: Not connected+
    SP2-0640: Not connected+
    SP2-0640: Not connected+
    exit_code=0+
    Checking for errors ...+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    ORA-01012: not logged on+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    The database has not been successfully created. Shutting down the instance ...+
    SQLPlus: Release 9.2.0.5.0 - Production on Fri Apr 27 06:23:12 2012*+
    Copyright (c) 1982, 2002, Oracle Corporation.  All rights reserved.+
    ERROR:+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    Cannot create control file for abc+
    RW-50010: Error: - script has returned an error:   9+
    RW-50004: Error code received when running external process.  Check log file for details.+
    Running Database Install Driver for abc instance+

    Please make sure the user accounts for the installation (applmgr/oracle) have full privileges.
    Oracle Applications Installation Guide: Using Rapid Install -- Page 1-9
    http://docs.oracle.com/cd/B25516_18/current/acrobat/r115102ins.pdf
    If you still have the same issue, please upload all the log files to any free hosting website and post the link here so we can review it.
    Thanks,
    Hussein

  • Urgent: DBrefresh error 354 while creating control file, oracle9i, SAP R3

    Hi experts,
    I have created trace file in Source system and moved the same to target system and edited and then while executing the trace file to create control file the following eeror is coming
    my trace file is like this. . .
    STARTUP NOMOUNT
    CREATE CONTROLFILE SET DATABASE "P47" RESETLOGS ARCHIVELOG
    --  SET STANDBY TO MAXIMIZE PERFORMANCE
        MAXLOGFILES 255
        MAXLOGMEMBERS 3
        MAXDATAFILES 336
        MAXINSTANCES 50
        MAXLOGHISTORY 8168
      '/oracle/P47/sapdata9/btabd_63/btabd.data63',
      '/oracle/P47/sapdata9/stabi_27/stabi.data27',
      '/oracle/P47/sapdata9/btabi_122/btabi.data122',
      '/oracle/P47/sapdata9/stabd_28/stabd.data28',
      '/oracle/P47/sapdata9/btabi_123/btabi.data123',
      '/oracle/P47/sapdata9/btabd_64/btabd.data64',
      '/oracle/P47/sapdata9/btabi_124/btabi.data124'
    CHARACTER SET WE8DEC
    i run command like this:
    SQL> @/oracle/P47/saptrace/usertrace/control.sql
    ORACLE instance started.
    Total System Global Area          1249618992 bytes
    Fixed Size                                     732208 bytes
    Variable Size                             788529152 bytes 
    Database Buffers                       459022446 bytes
    Redo Buffers                                1335296 bytes
    <b>354</b>
    when I press 'enter' again SQL prompt is comming
    Please help
    rgds

    Hi markus,
    thanks for reply . .
    control files are not created. . . .
    alertSID logs shows as follows
    orap47> tail -f alert_P47.log
    ARCH shutting down
    Thu Dec 13 13:01:51 2007
    ARC0: Archival stopped
    Thu Dec 13 13:01:51 2007
    ARC1: Archival stopped
    Thu Dec 13 13:01:54 2007
    ARCH: Archiving is disabled
    Shutting down archive processes
    Archiving is disabled
    Archive process shutdown avoided: 0 active
    <b>When @/oracle/saptrace/usertrace/control.sql command given in sepearate SQL window</b>
    Thu Dec 13 13:03:37 2007
    Starting ORACLE instance (normal)
    Disable cache advisory with old cache parameters
    Thu Dec 13 13:03:37 2007
    WARNING: EINVAL creating segment of size 0x000000004b800000
    fix shm parameters in /etc/system or equivalent
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    SCN scheme 3
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    Starting up ORACLE RDBMS Version: 9.2.0.4.0.
    System parameters with non-default values:
      processes                = 80
      sessions                 = 96
      timed_statistics         = TRUE
      shared_pool_size         = 704643072
      enqueue_resources        = 8000
      control_files            = /oracle/P47/sapdata1/cntrl/cntrlP47.dbf, /oracle/P47/sapdata2/cntrl/cntrlP47.dbf, /oracle/P47/sapdata3/cntrl/cntrlP47.dbf
      db_block_buffers         = 56033
      db_block_checksum        = FALSE
      db_block_size            = 8192
      compatible               = 9.2.0
      log_archive_start        = TRUE
      log_archive_dest         = /oracle/P47/saparch/P47arch
      log_buffer               = 1048576
      log_checkpoint_interval  = 0
      db_files                 = 354
      db_file_multiblock_read_count= 8
      log_checkpoints_to_alert = TRUE
      control_file_record_keep_time= 30
      dml_locks                = 2500
      row_locking              = always
      replication_dependency_tracking= FALSE
      transactions_per_rollback_segment= 20
      rollback_segments        = PRS_0, PRS_1, PRS_10, PRS_11, PRS_12, PRS_13, PRS_14, PRS_2, PRS_3, PRS_4, PRS_5, PRS_6, PRS_7, PRS_8, PRS_9
      transaction_auditing     = FALSE
      remote_os_authent        = TRUE
      db_domain                = world
      parallel_max_servers     = 20
      hash_join_enabled        = FALSE
      background_dump_dest     = /oracle/P47/saptrace/background
      user_dump_dest           = /oracle/P47/saptrace/usertrace
      core_dump_dest           = /oracle/P47/saptrace/background
      optimizer_features_enable= 9.2.0
      sort_area_size           = 2097152
      sort_area_retained_size  = 0
      db_name                  = P47
      open_cursors             = 800
      optimizer_mode           = choose
      btree_bitmap_plans     = FALSE
      pushjoin_predicate     = FALSE
      optimizer_index_cost_adj = 10
      newinitial_join_orders = FALSE
      optimpeek_user_binds   = FALSE
    PMON started with pid=2
    DBW0 started with pid=3
    LGWR started with pid=4
    CKPT started with pid=5
    SMON started with pid=6
    RECO started with pid=7
    Thu Dec 13 13:03:39 2007
    ARCH: STARTING ARCH PROCESSES
    ARC0 started with pid=8
    ARC0: Archival started
    ARC1 started with pid=9
    Thu Dec 13 13:03:39 2007
    ARCH: STARTING ARCH PROCESSES COMPLETE
    Thu Dec 13 13:03:39 2007
    ARC0: Thread not mounted
    Thu Dec 13 13:03:39 2007
    ARC1: Archival started
    ARC1: Thread not mounted
    rgds

  • Problem while Creating Control files while Cloning the Oracle DB

    Hi,
    I am failrly new to Oracle Administration. I have got the task of cloning our Production database into a new machine. With the help of various articles found over the web I have followed the below mentioned steps
    1)Executed the Alter database command for getting the control file copy.
    2) Taken the Datafiles,Control and redo log files copies into the Target machine.
    3) Copied the Pfile with the neccessary changes into the target machine.
    4) Edited the Create Control file syntax (generated from step 1) and executed the same on the target machine.
    Now the problem I face is that I get the following error while executing the create Control file syntax
    a)ORA-01503 - Creation of Controlfile failed.
    b) ORA-00219 - Required controlfile size 41760 exceeds max allowable size 20000.
    I am really stuck. Both my machine configurations and O/S installed are the same.
    Please advice me on how to Proceed... Thanking you all in advannce.
    Rgds,
    SN.

    Hi Jaffer,
    This is my code........ The control file has been generated by executing the syntax alter database backup controlfile to trace at the source db .
    STARTUP NOMOUNT pfile=ORADATA:ORAHOME1\ADMIN\ORACLE\PFILE\INIT.ORA;
    CREATE CONTROLFILE set DATABASE "ORACLE" RESETLOGS NOARCHIVELOG
    MAXLOGFILES 32
    MAXLOGMEMBERS 2
    MAXDATAFILES 32
    MAXINSTANCES 16
    MAXLOGHISTORY 65535
    LOGFILE
    GROUP 1 'ORADATA:ORAHOME1\ORADATA\ORACLE\LOG2ORCL.ORA' SIZE 200K,
    GROUP 2 'ORADATA:ORAHOME1\ORADATA\ORACLE\LOG1ORCL.ORA' SIZE 200K
    DATAFILE
    'ORADATA:ORAHOME1\ORADATA\ORACLE\SYS1ORCL.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\USR1ORCL.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\RBS1ORCL.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_DATA.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_INDEX.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KAN_DAT.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KAN_INDEX.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KIS_DATA.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KIS_INDEX.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_LUB_DATA.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BIMBJ01.DBF',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BIMAT01.DBF',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BITPA01.DBF',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BLUBFSINDEFX01.DBF',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\TEMP01.DBF',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_TOOLS.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\IMPORT1.DBF'
    CHARACTER SET WE8ISO8859P1
    # Recovery is required if any of the datafiles are restored backups,
    # or if the last shutdown was not normal or immediate.
    #RECOVER DATABASE
    # Database can now be opened normally.
    #ALTER DATABASE OPEN;
    # No tempfile entries found to add.
    #

  • Error while creating control file

    hi
    i am getting following error while creating controll file
    QL> shutdown
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup nomount
    ORACLE instance started.
    Total System Global Area  629145600 bytes
    Fixed Size                  1250548 bytes
    Variable Size             171969292 bytes
    Database Buffers          452984832 bytes
    Redo Buffers                2940928 bytes
    SQL> @c:\study\rose\c.sql
    SP2-0042: unknown command "DATAFILE" - rest of line ignored.
    SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
    SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
    SP2-0734: unknown command beginning "CHARACTER ..." - rest of line ignored.
    SP2-0044: For a list of known commands enter HELP
    and to leave enter EXIT.
    1  CREATE CONTROLFILE SET DATABASE "ROSE" RESETLOGS  froce logging NOARCHIVELOG
    2      MAXLOGFILES 32
    3      MAXLOGMEMBERS 2
    4      MAXDATAFILES 32
    5      MAXINSTANCES 16
    6      MAXLOGHISTORY 1752
    7  LOGFILE
    8  GROUP 1 'C:\oracle\product\10.2.0\oradata\rose\LOG1ROSE.ORA'  SIZE 50M,
    9    GROUP 2 'C:\oracle\product\10.2.0\oradata\rose\LOG2ROSE.ORA'  SIZE 50M,
    10   GROUP 3 'C:\oracle\product\10.2.0\oradata\rose\LOG06.LOG'  SIZE 25M,
    11*   GROUP 4 'C:\oracle\product\10.2.0\oradata\rose\LOG07.LOG'  SIZE 25M
    SQL>

    CHETAN YADAV wrote:
    hi
    i am getting following error while creating controll file
    QL> shutdown
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup nomount
    ORACLE instance started.
    Total System Global Area  629145600 bytes
    Fixed Size                  1250548 bytes
    Variable Size             171969292 bytes
    Database Buffers          452984832 bytes
    Redo Buffers                2940928 bytes
    SQL> @c:\study\rose\c.sqlWe can't debug what we can't see. And what we can't see is the contents of "c:\study\rose\c.sql".
    SP2-0042: unknown command "DATAFILE" - rest of line ignored.
    SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
    SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
    SP2-0734: unknown command beginning "CHARACTER ..." - rest of line ignored.
    SP2-0044: For a list of known commands enter HELP
    and to leave enter EXIT.
    1 CREATE CONTROLFILE SET DATABASE "ROSE" RESETLOGS froce logging NOARCHIVELOG
    2 MAXLOGFILES 32
    3 MAXLOGMEMBERS 2
    4 MAXDATAFILES 32
    5 MAXINSTANCES 16
    6 MAXLOGHISTORY 1752
    7 LOGFILE
    8 GROUP 1 'C:\oracle\product\10.2.0\oradata\rose\LOG1ROSE.ORA' SIZE 50M,
    9 GROUP 2 'C:\oracle\product\10.2.0\oradata\rose\LOG2ROSE.ORA' SIZE 50M,
    10 GROUP 3 'C:\oracle\product\10.2.0\oradata\rose\LOG06.LOG' SIZE 25M,
    11* GROUP 4 'C:\oracle\product\10.2.0\oradata\rose\LOG07.LOG' SIZE 25M
    SQL>

  • Database Error while running the query.

    Hi,
    While running the query in webi rich client i am having a "database error IES 10901 and WIS 10901" , it is showing that the data source name not found and default driver is not specified.
    I am trying to generate report from efashion universe which is in .unx format, same client version and universe is running fine on another machine (webi rich client).
    PS: The above mentioned universe is running fine on my BI launch pad, the problem is with webi rich client only.
    Please help!!

    Hi,
    Which Database your are using .
    As explained by Yuvraj You need to install driver for specific database .
    Ask for client or (your Database ) driver from administrator .
    After installation you can see your database Driver in following path
    Control Panel\System and Security\Administrative Tools\Data Sources (ODBC)
    See in Drivers Tab .
    If you are using oracle & client is install on your system then Check TNS Names File in NETWORK folder .

Maybe you are looking for

  • Simple basic java question

    public static void main(String[] args) ..anyone know the statement as above could be start at begining , so what is the (String[ ] args) mean in java ? in my ideas of this statement is publc : indicates the statemean can be used as all class , this i

  • How to restrict the display of report variants

    Hello All, I want t know how to restrict the display of report variants. I mean, when a user saves a variant for his/her purpuse on some report program, only he/she can refer the variant while other users cannot. I know that by setting the attribute

  • G50-30 Which windows

    HI guys, first of all sorry for my lousy english. I have recently bought Lenovo G50-30 laptop and it came with preinstalled Windows 8.1 and its seems to be a little bit slow, i dont know mayybe its dur a slow processor or what. So my question is woul

  • Trying to sync iPhone 4 with itunes and get an error message PLEASE help

    I am currently using and iPhone 4. This morning I had synced my iPhone with itunes and it was working fine. I came home and wanted to add some music and such to it and all of a sudden i will plug it in to itunes and i,t looks like its going gets to s

  • Hi how much is it to replace the screen on the 5c?

    hi how much is it to replace the screen on the 5c? Also what does my warranty look like if I bough the phone in October 2013? How long would it take to fix?