While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings: "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36)."
While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings: "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36).” NOt sure this is a G-Raid problem, can anyone help?
This is likely a problem with the drive itself. This error indicates unspecified I/O errors with the drive, which can be from a hardware fault, or a formatting issue. If the drive has valuable data on it, then try connecting it to another PC to get the data off, and then try fully partitioning and formatting the drive with Disk Utility. If this corrects the error then you should be able to use the drive again as it was likely a formatting issue, but if the problem continues then it is likely a hardware fault and the best solution is to be safe and replace the drive.
Similar Messages
-
While trying to copy my iPhoto Library (49.61 GB) to an external hard drive, I receive the error message "The Finder can’t complete the operation because some data in “iPhoto Library” can’t be read or written. (Error code -36)"
I need to move my library because I have no more disk space. This was going to be step 1 followed by backing up to another EHD.
More details: iPhoto version 9.6 (910.29) OX X Yosemite Version 10.10.1 (Mid 2011 Mac Book Air). EHD= WD Elements 1 TB (purchased at B&H Photo where the sales associate formatted it for a Mac).
Any step by step ideas for help are appreciated! I've read through a few threads but need more step by step directions.That error message is an I/O error which can mean a number of things, among them a bad file. Here's a couple of fixes you can try:
1 - use the free version of iPhoto Library Manager to rebuild the library with the rebuild being created on the EHD as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
When iPLM finishes it will display a log file entry showing which files it was unable to use in the rebuild. Open the old library with iPhoto, locate and delete the photos that iPLM listed in its log. Then try dragging the library to the EHD again.
If the above fails continue with:
2 - create a new, empty library on the EHD. Use the paid version of iPhoto Library Manage to copy the events (1-2 at a time) to the new library on the EHD. At one point iPLM may run into the bad file and be unable to copy the event. You can check iPLM's log to see what file it is. Then open that library, delete the file and either try to copy the entire library by dragging and dropping or contine with the copying of events from the old library to the new library. -
Hi,
Installed a new startup drive and cannot access my photos. While copying/pasting iPhoto library from old to new drive I get,
The finder can't complete the operation because some data on iPhoto Library can't be read or written.
Getting help from Apple senior advisor caused more problems, was unable to boot up for a while. Back up now but still can't transfer iPhoto Library.
Anyone seen this before?
Thank youLinc and Larry, could you please have a look at this thread? Sorry, it is in German:
Re: Fehlermeldung beim Verschieben von iPhoto
The OP is trying to copy the iPhoto library to an external drive and getting "The finder can't complete the operation because some data on iPhoto Library can't be read or written. Error code -36". This happens even when copying to the same drive. The destination drive is correctly formatted.
The Console is showing a message I don't understand:
03.06.14 18:26:40,990 Finder[1154]: NSFileCoordinator: Sending of a providerCheckin message was interrupted. Details: Connection interrupted
Any idea what this means? -
I have a backup from Time machine of my iPhoto and I get the above error when I try to restore them. Thae backup was done with Mountain Lion and I upgraded to Mavericks. The backup is on an external drive.
Again this is the error:
The Finder can’t complete the operation because some data in “iPhoto Library” can’t be read or written.(Error code -36)
I have also tried going to earlier dated backup and get the same error.
Any help would be greatly appreciated. Thank YouThat error message is an I/O error which can mean a number of things, among them a bad file. Here's a couple of fixes you can try:
1 - use the free version of iPhoto Library Manager to rebuild the library with the rebuild being created on the EHD as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
When iPLM finishes it will display a log file entry showing which files it was unable to use in the rebuild. Open the old library with iPhoto, locate and delete the photos that iPLM listed in its log. Then try dragging the library to the EHD again.
If the above fails continue with:
2 - create a new, empty library on the EHD. Use the paid version of iPhoto Library Manage to copy the events (1-2 at a time) to the new library on the EHD. At one point iPLM may run into the bad file and be unable to copy the event. You can check iPLM's log to see what file it is. Then open that library, delete the file and either try to copy the entire library by dragging and dropping or contine with the copying of events from the old library to the new library. -
Trying to copy iPhoto Library to external hard drive for backup. Error message: The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).
That code is
-36
ioErr
I/O error (bummers)
Make sure the EHD is formatted OS X Extended (journaled) and run Disk Utilty on the EHD and repair the disk. If that fails to help I'd try the following:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
In the next window name the new library and select the external HD as the location of the newly rebild library.
Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
OT -
I recently did a clean install on a 2011 MacBook Pro with Mavericks. Went to install Adobe Acrobat 9 with the DVD media and about 3/4 of the way through the install, the install stopped and the following window appeared: The Finder can't complete the operation because some data in "Adobe Acrobat" can't be read or written. (Error code - 36). I've tried to install a few times and get the same message. Is Adobe Acrobat 9 incompatible with Mavericks. I've seen some posts on Apple Support Communities indicating that it is indeed compatible, but no explanation why the error pops up.
The hard drive may be dying anyway, or the directory damaged because it is so full. You should never let the hard drive get over 85% full.
A -36 error is a read/write error.
All you did with the power is reset the SMC. Does nothing to reset everything to factory settings.
Do you have your original 10.4 installer discs for the MacBook?
Is your data backed up? -
the finder can't complete the operation because some data in "VIDEO_TS.BUP "can't be read or written (error code-36)
I faced the same problem and i fixed it by going to applications - utility - disk utility and fixing the errors.
-
I've managed to look at the folders inside of the library and have pinpointed the image that has the error, but I can't delete it while on time machine. How can I get rid of this picture so I can bring back the aperture library back to my laptop?
The Time Machines Backup is formated as Mac OS Extended (Case Sensitive, Journaled), my mac is formated as Mac OS Extended (Journaled).
The names on the file are all Uppercase
When I try to copy the Aperture file, it copies about 70% of the file (it's about 33GB in size), and halfway through I get this error.
I'm able to copy 99.99% of all of the images if I open the Aperture Folder using the "show package contents" under the backups using finder (Time Machine Backups>Backups.backupdb>CQ Macbook Air>2012-04-30-070933>HD.....>Pictures>Aperture Library). The only file I can't copy is that picture, which I'm totally ok with deleting, but Finder won't delete it for me. If nothing else works, I could copy the individual masters and re-create the folders, however I'd hate to do this as I would have to go through 10,000+ pics -
I have a new IMac with OS Lion. When trying to open some websites they open with Safari by default. I am trying to change this by changing the "open with" default to Firefox but I can't move Firefox to the Apps location.
The hard drive may be dying anyway, or the directory damaged because it is so full. You should never let the hard drive get over 85% full.
A -36 error is a read/write error.
All you did with the power is reset the SMC. Does nothing to reset everything to factory settings.
Do you have your original 10.4 installer discs for the MacBook?
Is your data backed up? -
My Firefox was not working, so I deleted it and planned to reinstall it. I downloaded Firefox using Safari. When I try to reinstall, I get the above message.
Try to repair the disk permissions:
*http://thexlab.com/faqs/repairprocess.html
If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 19.0: http://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application (e.g. open the Applications folder in the Finder and drag the Firefox application to the Trash) to do a clean (re-)install
*Install the new version that you have downloaded
*https://support.mozilla.org/kb/Installing+Firefox+on+Mac
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox -
Some data in ... could not be read or written. (Error code -36).
Hello.
I just got a Lacie 512mb disk, and thought it would be ideal for running my iTunes library off of. Got the disk, ran it through its paces, hooked it up to my Mac mini, and I can't seem to copy hardly any files over. Here's one error (but you can replace "iTunes Library" with any song and it's the same thing)...
'The Finder cannot complete the operation because some data in "iTunes Library" could not be read or written. (Error code -36).'
So, I think there's disk or file damage, etc. I boot off an external and run Disk Utility, DiskWarrior and TechToolPro against it - everything checks out fine.
But I can't copy files from the mini's internal to my external Repair Boot disk or the Lacie 512. Always that same -36.
So, at first I think it's the mini, then I think it's the Lacie, because it's new, so I reformat it: same issue. And that coupled with it won't copy to my Repair Boot, makes me think the mini again.
But, I've got a g1 iPod mini hooked up (formatted in hfsj+), and I can copy this file to the iPod mini, but no where else. I not sure what this makes me think.
And, I can duplicate the file on the Mac mini. In fact, if it's a song file that won't copy (none of them will), I can play it just fine.
Thanks.
Mac mini Mac OS X (10.4.3)I experienced a problem in a familiar way.
After a recording session I tried to copy the complete folder with session and sound files to another disk (original and target disk both LaCie d2 250 FW800).
Somehow the proces stopped prompting an -36 error over some files.
When I look up these files in the Finder, it seems to have an iTunes audio-file icon instead of a ProTools audio-file icon (and so other standard app to open with). All the other files will copy fine. The files will play with quicktime in the preview window.
Any-one a solution?
Almost seems like some kind of copy protection, like implied earlier in this thread. I hope it's not. These are the originals... -
Hi all,
I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
"the finder cannot complete the operation because some data in [name of
iMovie file] could not be read or written (Error Code 26)" or the
message "A project file is missing. The file [name of the QuickTime
movie inside the project.dv] couldn't be opened and is being skipped."
This happened suddenly, I was able to save a backup version numerous
times while working on the project.
I followed some of Karl Petersen's advise on apple discussions. I opened
the package contents, and everything seems to be there. The source file
(original QuickTime movie) is there and can be opened and played. I
replaced the current project file with the backup in the package
contents, but that did not change anything. I was able to export the
movie timeline into a new project as a single clip, but would like to be
able to copy the current project.
Thanks for any ideas..Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).
-
Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
Thanks, RickThe hard drive may be dying anyway, or the directory damaged because it is so full. You should never let the hard drive get over 85% full.
A -36 error is a read/write error.
All you did with the power is reset the SMC. Does nothing to reset everything to factory settings.
Do you have your original 10.4 installer discs for the MacBook?
Is your data backed up? -
The Finder can't complete the operation because some data can't be read or written. (Error code -36)
Since the upgrade to 10.9 I have the most annoying issue when copying files. I have a secondary drive for media in which I keeo my media on / Samples / Video etc. I keep an exact copy on 2 external drives.
95% I can't copy the the new media across my drives without a few restarts. I get the following:
The Finder can’t complete the operation because some data can’t be read or written.
(Error code -36)
This is not a permissions issue. I've checked every folder down the the exact file it calls on. Everyone has READ & WRITE. If I restart the computer after getting this message it will do a little bit more then get stuck on another folder or file and pop the message.
If I do smaller chuncks, it seems to do better but not all the time.
PLEASE someone, tell me you have seen this before and you have a workaround. This is killing me,
All HD are OS Extended Journaled - No FAT
MacBook Pro I7
16GB RAM
250SSD
450SSD
2TD Lacie FW800 External
is the equation right now
thanks in advance for any helpPlease read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Hi guys, an empty folder is stuck in my trash & I get this message: "The Finder can’t complete the operation because some data in the folder can’t be read or written. (Error code -36). It won't shift no matter how I try to Secure Empty trash. Any ideas?
The Time Machines Backup is formated as Mac OS Extended (Case Sensitive, Journaled), my mac is formated as Mac OS Extended (Journaled).
The names on the file are all Uppercase
When I try to copy the Aperture file, it copies about 70% of the file (it's about 33GB in size), and halfway through I get this error.
I'm able to copy 99.99% of all of the images if I open the Aperture Folder using the "show package contents" under the backups using finder (Time Machine Backups>Backups.backupdb>CQ Macbook Air>2012-04-30-070933>HD.....>Pictures>Aperture Library). The only file I can't copy is that picture, which I'm totally ok with deleting, but Finder won't delete it for me. If nothing else works, I could copy the individual masters and re-create the folders, however I'd hate to do this as I would have to go through 10,000+ pics
Maybe you are looking for
-
Use of hints in query performance
Hi Please let me know actual usage of hints in query tunging, how do we write hints of increase performnace. let me know below query will gives better performnce. if hints are not use query will degrade performance. SELECT /*+ ORDERED INDEX (b, jl_br
-
Solaris 8 loses keyboard configuration
While installing Solaris 8 on my Dell Latitude laptop, everything works fine until I get to the point that the installation asks me to select the language to be used. When I press "1", the string "^]]229z" is echoed on the screen until the buffer is
-
Can I capture HDV to PE7 - do my editing - then burn to regular DVD in SD and later burn to Blue Ray in HD? Thanks, - Don
-
Dear all I have just completed a cloning.One of my datafile is offline. In the control file it is pointing to a different path with a ficticious filename like /nd01/oradev/devdb/9.2.0/dbs/MISSING00098' The file I want is under location another locati
-
Footer Displacement after editing
Hi all, I am trying to create a custom email template for the first time, and I took a Mailchimp template and edited it in Dreamweaver. Things are looking ok but when i preview in my browser through Mailchimp, the footer shows up right after the head