Who can I thank at Adobe for the 117 spam emails I received in 24 hours since joining Creative Cloud?

Who can I thank at Adobe for the 117 spam emails I received in 24 hours since joining Creative Cloud? I've tried changing my contact information but it keeps reverting back.
Should I just cancel? Please any suggestions welcome.

Unwanted Email notices
Click your avatar picture near the upper right corner (slightly to the left of the pencil) and select PREFERENCES then set all Email Preferences to OFF and click Save at the bottom left
AND
Another new feature is that Jive7 is oriented toward social networking... so every time you start or reply to a message you are automatically added to a FOLLOW list... meaning you receive a notification of every subsequent message in that thread
Click the FOLLOW link at the upper right and select STOP FOLLOWING... and don't click the link again to check your status, as you will then be added to the CONNECTIONS STREAM and you will have to uncheck that option as well
And, after you post in a message thread and select Stop Following, you need to do it all over again the next time you add a reply to the same message thread, since EVERY POST adds you to the automatic Follow list

Similar Messages

Thank you, Adobe for the enhanced actions editor (Was: Thank you, Adobe)

Just want to thank you for the Enhanced Actions Editor... fantastic!
Months ago, I had requested to have something similar that Flash Catalyst had, and you delivered.

Hi Eddie,
On behalf of the product team and Adobe, I thank you for sharing your feedback on the new feature. We are glad that you liked it and we are hoping that it will be as useful to our other users too.
Have a nice day!
Thanks,
Preran

Who can tell me how to get the CRT for BBPCRM patch 8

hello ,
my solution patch level is SAP_BASIS     700     0011     SAPKB70011     SAP Basis Component
SAP_ABA     700     0011     SAPKA70011     Cross-Application Component
PI_BASIS     2005_1_700     0011     SAPKIPYJ7B     PI_BASIS 2005_1_700
ST-PI     2005_1_700     0003     SAPKITLQI3     SAP Solution Tools Plug-In
SAP_BW     700     0012     SAPKW70012     SAP NetWeaver BI 7.0
SAP_AP     700     0008     SAPKNA7008     SAP Application Platform
BBPCRM     500     0007     SAPKU50007     BBPCRM
CPRXRPM     400     0002     SAPK-40002INCPRXRPM     SAP xRPM/cProjects/cFolders 4.00 (ABAP)
ST     400     0010     SAPKITL420     SAP Solution Manager Tool
ST-A/PI     01G_BCO700     0000     -     Servicetools for other App./Netweaver 04
ST-ICO     150_700     0007     SAPK-15077INSTPL     SAP Solution Manager Implementation Cont
ST-SER     700_2005_2     0002     SAPKITLOC2     SAP Solution Manager Service Tools
But now , i find some CRM function can not be used , for example , i could not create a servcie message and monitor , if i create a service message and monitor the message , an abap dump occurs , the dump error is
CALL_METHOD_NOT_IMPLEMENTED
CX_SY_DYN_CALL_ILLEGAL_METH
Error in the ABAP Application Program
The current ABAP program "CL_EX_CRM_APPOINTMENT_BADI====CP" had to be
   terminated because it has
come across a statement that unfortunately cannot be executed.
i try to upgrade the BBPCRM patch to 8 . the system tell me that you should need a CRT for the patch . i try to find the CRT, Unfortunate , i could't find it . who can tell me how to find the CRT . thanks !

Hi Tony,
Please, refer to note 892412. Here you can find the patch level required depending on the solman used. I can tell u that we have applied this note and currently we create service messages. Check this patch levels first.
Regds,
Jose Sorli

Thanks so much for the offer of help. I'm using 10.9.2 OSX. I have Numbers 2.3 (554). I tried the new version but it was "dumbed down" so much (to make it usable on multiple platforms) that it was of no use on iMac. I still can't get my contacts to open

Thanks so much for the offer of help. I'm using 10.9.2 OSX. I have Numbers 2.3 (554). I tried the new version but it was "dumbed down" so much (to make it usable on multiple platforms) that it was of no use on iMac.
I still can't get my contacts to open in Numbers like they used to do. I have a group of five addresses in a test folder in Mail called "untitled group." But no amount of pasting, dragging, etc can get them to open up in Numbers. My "real" folder has almost 100 addresses so I can't do it one by one.
Thoughts?
Thanks again.
Bob

Bob,
You can place contacts in a table In Numbers by the following methods:
Numbers 2.3:
drag from contacts
Numbers 3.2
copy from contacts, then paste into Numbers
In both cases you need to open System preferences, then select the "Security & Privacy panel and allow Numbers aaccess your contacts information.

I ordered the IX500 Scan Snap through Amazon and received the incorrect XI Standard disc in Windows format instead of for my Mac. I contacted Amazon and they suggested I contact Scan Snap who suggests I contact Adobe for the correct disc. Please help.

I ordered the IX500 Scan Snap through Amazon and received the incorrect Adobe Acrobat XI Standard disc in Windows format instead of for my Mac. I contacted Amazon and they suggested I contact Scan Snap who suggests I contact Adobe for the correct disc. Please help.

Fujitsu delivers only Adobe Acrobat for Windows, not Mac.
http://www.fujitsu.com/global/services/computing/peripheral/scanners/product/ix500/

Hello. It can be a iPhone4 accessories for the one with pictures and other things are transferred wirelessly to a TV? Thank you

Hello. It can be a iPhone4 accessories for the one with pictures and other things are transferred wirelessly to a TV? Thank you

You need an Apple TV to be able to wirelessly send pictures etc. from iPhone.
However you can buy an adapter if you want to connect to a TV
http://store.apple.com/us/product/MC953

Hello. I ve got a question. I accidentally bought membership but it doesnt have Adobe Muse that I need. What should I do? Can I extend my membership for the right one, or should I first get the money back. What kind of membership do I need to have Adobe M

Hello. I ve got a question. I accidentally bought membership but it doesnt have Adobe Muse that I need. What should I do? Can I extend my membership for the right one, or should I first get the money back. What kind of membership do I need to have Adobe Muse software?

Plans are listed at Creative Cloud pricing and membership plans | Adobe Creative Cloud
The drop down at individual plans does show that you may subscribe to only Muse
You probably need to cancel what you have... You need Adobe support to cancel a subscription
-start here https://forums.adobe.com/thread/1703848
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
--and two links which may provide more details, if the above links don't help you
-http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

Ever since i updated to ios 8.3, my imessage has been on "Waiting for Activation" Please who can assist? i have reset the network settings and also have restarted the phone.

ever since i updated to ios 8.3, my imessage has been on "Waiting for Activation" Please who can assist? i have reset the network settings and also have restarted the phone.

same problem here

PhotoShop CS5 Extended serial number - NOT accepted - is there a quick fix? Many thanks and hugs for the winning answer :-)

guys, i need you help - CLEARLY - so I bought PhotoShop CS5 Extended two years ago - but never real used it - today I requested the serial number - which was sent asap - BUT the system doesn't accept it, says it invalid - question - am I doing doing something wrong or is there a quick fix? Many thanks and hugs for the winning answer :-) Somayeh!

Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option.
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

Can I use a substitute for the Sample Clock?

I have three different analog inputs coming from one device (PCI-6221). Two inputs are running at the same sample rate while the third needs a faster sample rate and a trigger. I have these seperated as two seperate tasks but my problem is they both use the sample clock. Can I use a substitute for the sample clock on the third channel?
I am running LabVIEW 8.2 on Windows XP.
Thanks in advance for your help.
Ron Deavers, CLD

Hi programmindragon,
I understand you are trying to
configure your PCI-6221 to sample on multiple channels, while having
different rates and triggers for the channels. Unfortunately, you can
only configure one analog input task to run at once and all the channels in
the task must share the same configurations, including the sample clock
and trigger. This is due to the fact that all the channels are
multiplexed to a single amplifier and ADC on the device. Thus, you will
not be able to configure the two inputs at one rate and use a different
clock rate and trigger for the third input. Is it possible to sample at the
maximum rate on all channels and decimate the data that you don't need on the certain
channels, as well as share the same type of triggering? Hopefully you will be able to run your application with the same configuration across multiple channels, otherwise you may need multiple DAQ devices. Please let me know if you have any further questions related to this issue.
Regards,
Daniel S.
National Instruments

Can we create two POs for the same 3rd party Sales Order?

Hi MM experts,
Issue: Can we create two POs for the same 3rd party Sales Order
In Third party purchase process, first sales order created with a spl. item category and it creates the PR automatically with the Sales order material and Qty and this PR converted PO.
They got a pur.req. for sale order on same item for same delevery date. They did not get any warning msg. saying that a PO was prviously placed against this sale order.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
If anyone face the same issue, please let me know if you have any answer to this questions.
Thanks in advance.
Suresh.

Suresh,
It is hard for me to give you a definitive answer since you have created a customized solution.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
Normally, the system will not do this. A third party PR or PO will be 'account assigned' to the Sales order. SAP standard 3rd party will not create additional purchase reqs unless there has been manual intervention. Try searching for changes in the Sales order and changes in the original purchase order. They may give you a clue.
I believe the normal Item category for third party SO is TAS (I am working from memory here, I am not in front of a system). I don't know what ZTAG does. I confess I am not an SD expert. You might also want to post your question in an SD forum.
You mention two custom applications, ZMMPLAN and ZSTPMP. These somehow have functionality that is used to help you convert your PRs to POs. If I were in your position, I believe I would also look at these applications for clues to how they might be contributing to your problem. And please don't send me details about these apps. I will not comment on custom code in this forum.
Sorry I can't be of more help.
Rgds,
DB49

Thank you all for the responses. By process of elimination, I think the problem is the connection to the express in between the extreme and dock. I bought another express and tried it at dock, no luck, I then replaced new express where the one is between

I have an airport extreme and express setup. My extreme is in my 2nd floor office with windows facing the water. My dock is about 250 ft away down a very steep hill. I have the express about 100 ft down the hill in an electrical waterproof box attached to a tree as high as I could install. The signal is weak and I'm thinking I might have to buy another express. Any thoughts on the best setup for me. I ultimately want to control speakers(hard wired in) down at the dock with my iphone. I have a receiver coming with airplay built in.
Thank you all for the responses. By process of elimination, I think the problem is the connection to the express in between the extreme and dock. I bought another express and tried it at dock, no luck, I then replaced new express where the one is between extreme and dock, no better. I unplugged the express between extreme and dock and there was no difference. So I believe I am connecting to the airport express or extreme that is inside the house. Again because when i approach express that is halfway I reconnect. so if you can understand my chaos, I believe the express in between is not really connecting to the extreme inside my house. Yes, No? So I need to know how to know if the express half way down the hill is getting the connection from the the extreme in the house. This is wearing me out!!!!!

You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
An Extreme's Guest network is separate from its Main network; that is the reason for having it.

Who can tell me how to use the transction "KKRC"?

who can tell me how to use the transction "KKRC"?
Please explain me all the steps to be required.
Thanks in advance!

hi..
http://help.sap.com/bp_bl603/BBLibrary/Documentation/181_BPP_EN_BR.doc
KKBC HOE Transaction code Error
Regards

You can assign a price condition for the profile?

You can assign a price condition for the profile?
How to do this?
thanks,
Wilson

The solution have Note SAP 105621.

Can I purchase Photoshop CS for the 1st time through the Creative Cloud?

I currently have Lightroom 4 and wish to upgrade to LR5. I would also like to purchase Adobe PS CS6 for the 1st time. I have never owned a PS CS product, so I'm wondering if I can buy into the Creative Cloud program for $9.99 or do I need to already own some version of PS CS?

You can get the PS CS6 version from CC too :
Downloading CS6 applications from Creative Cloud
Creative Cloud Photography plan : Adobe Creative Cloud
Regards
Rajshree

Who can I thank at Adobe for the 117 spam emails I received in 24 hours since joining Creative Cloud?

Similar Messages

Maybe you are looking for