Whr to find modulepool program of aTransaction

Hi all,
I find main program for a transaction code as report in some entries of TSTC table but when i run a transaction i find the program as modulepool program from system status option. In which table can i find the respective modulepool program of a tcode.
for ez table entry for ME21N in TSTC is RM_MEPO_GUI and its corresponding program is SAPLMEGUI from system status option.
Message was edited by:
chandrahasa

Hi,
Run your Transaction.
Then the screen of your program Displays.
In the screen In the Right Bottom corner there will be your transaction name. Just click the Icon nearby and find your program name.
Thanks,
Reward If Helpful.

Similar Messages

Download and Upload Modulepool program

hai all,
Could any one say how to Download and Upload Modulepool program from sap.
Thanks,
Jeevan.

Hi Puduru
Welcome to ABAP forums.
If you just want to export Module pool program once, you can use transaction SE80 and menu point Utilities->More Utilities->Upload/Download->Download option ( for each include / component ).
Save it as a text file and then repeat the same process.
Here's other programs for the same functionality. You can use one of them.
http://www.members.tripod.com/abap4/Upload_and_Download_ABAP_Source_Code.html
http://sap.ittoolbox.com/code/d.asp?d=1623&a=s
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/finding your code in bsp applications.article
http://www.geocities.com/rmtiwari/Resources/Utilities/WebViewer.html
http://www.dalestech.com/
Dont forget to rewards pts, if it helps ;>)
Regards,
Rakesh

Wht we do in modulepool programming

hi abapers,
can u plz guide me
1. wht we do in modulepool programming
2.can u plz send one senario to undersatnd the perpose.
thanks in addvance

Hi,
Check these links.
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
REPORT ZBHMOD1 .
DATA:OKCODE1 LIKE SY-UCOMM,
OKCODE2 LIKE SY-UCOMM.
DATA:N1(10) TYPE N,N2(10) TYPE N,RES(12) TYPE N.
MODULE USER_COMMAND_1000 INPUT.
CASE OKCODE1.
WHEN 'NEXT'.
RES = N1 + N2.
SET SCREEN 1001.
WHEN 'CLEA'.
CLEAR:N1,N2.
WHEN 'BACK'.
SET SCREEN '0'.
ENDCASE.
ENDMODULE. " USER_COMMAND_1000 INPUT
MODULE STATUS_1000 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'TIT1'.
ENDMODULE. " STATUS_1000 OUTPUT
MODULE USER_COMMAND_1001 INPUT.
CASE OKCODE2.
WHEN 'BACK'.
SET SCREEN 1000.
ENDCASE.
ENDMODULE. " USER_COMMAND_1001 INPUT
MODULE STATUS_1001 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'TIT2'.
ENDMODULE. " STATUS_1001 OUTPUT
FLOW LOGIC:
PROCESS BEFORE OUTPUT.
MODULE STATUS_1000.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_1000.
PROCESS BEFORE OUTPUT.
MODULE STATUS_1001.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_1001.
2)
REPORT ZBHMOD2.
DATA: OKCODE1 TYPE SY-UCOMM,
OKCODE2 TYPE SY-UCOMM,
ENAME(10) TYPE C,
DNAME(10) TYPE C.
MODULE STATUS_1000 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'TIT1'.
ENDMODULE. " STATUS_1000 OUTPUT
MODULE STATUS_1001 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'TIT2'.
ENDMODULE. " STATUS_1001 OUTPUT
MODULE USER_COMMAND_1000 INPUT.
CASE OKCODE1.
WHEN 'BACK'.
SET SCREEN '0'.
WHEN 'NEXT'.
DNAME = ENAME.
SET SCREEN '1001'.
ENDCASE.
ENDMODULE. " USER_COMMAND_1000 INPUT
MODULE USER_COMMAND_1001 INPUT.
CASE OKCODE2.
WHEN 'BACK'.
SET SCREEN '1000'.
ENDCASE.
ENDMODULE. " USER_COMMAND_1001 INPUT
FORM ON_CTMENU_FORM USING ZDEMO1 TYPE REF TO CL_CTMENU.
CALL METHOD ZDEMO1->LOAD_GUI_STATUS
EXPORTING
PROGRAM = 'ZDEMO1'
STATUS = 'ZDEMO1'
MENU = ZDEMO1.
ENDFORM. " ON_CTMENU_FORM
FLOW LOGIC:
PROCESS BEFORE OUTPUT.
MODULE STATUS_1000.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_1000.
PROCESS BEFORE OUTPUT.
MODULE STATUS_1001.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_1001.
Every Screen has a pbo and a pai.
Screen elements are the textbox, buttons, radio buttons and check boxes .....
If we want to pass data from a abap program to a screen element, we have to create a variable with the name we have given in the screen.So whatever the value is present in that variable is reflected on to the screen element.
Here is an example :
Using subscreens and some of the screen elements
REPORT demo_dynpro_subscreens.
DATA: ok_code TYPE sy-ucomm,
save_ok TYPE sy-ucomm.
DATA: number1(4) TYPE n VALUE '0110',
number2(4) TYPE n VALUE '0130',
field(10) TYPE c, field1(10) TYPE c, field2(10) TYPE c.
CALL SCREEN 100.
MODULE status_100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE fill_0110 OUTPUT.
field = 'Eingabe 1'(001).
ENDMODULE.
MODULE fill_0120 OUTPUT.
field = field1.
ENDMODULE.
MODULE fill_0130 OUTPUT.
field = 'Eingabe 2'(002).
ENDMODULE.
MODULE fill_0140 OUTPUT.
field = field2.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE save_ok INPUT.
save_ok = ok_code.
CLEAR ok_code.
ENDMODULE.
MODULE user_command_0110 INPUT.
IF save_ok = 'OK1'.
number1 = '0120'.
field1 = field.
CLEAR field.
ENDIF.
ENDMODULE.
MODULE user_command_0130 INPUT.
IF save_ok = 'OK2'.
number2 = '0140'.
field2 = field.
CLEAR field.
ENDIF.
ENDMODULE.
MODULE user_command_100 INPUT.
CASE save_ok.
WHEN 'SUB1'.
number1 = '0110'.
WHEN 'SUB2'.
number1 = '0120'.
CLEAR field1.
WHEN 'SUB3'.
number2 = '0130'.
WHEN 'SUB4'.
number2 = '0140'.
CLEAR field2.
ENDCASE.
ENDMODULE.
flow logic for screen 100
PROCESS BEFORE OUTPUT.
MODULE STATUS_100.
CALL SUBSCREEN: AREA1 INCLUDING SY-REPID NUMBER1,
AREA2 INCLUDING SY-REPID NUMBER2.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
MODULE SAVE_OK.
CALL SUBSCREEN: AREA1,
AREA2.
MODULE USER_COMMAND_100.
flow logic for screen 110
PROCESS BEFORE OUTPUT.
MODULE FILL_0110.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0110.
flow logic for screen 120
PROCESS BEFORE OUTPUT.
MODULE FILL_0120.
PROCESS AFTER INPUT.
flow logic for screen 130
PROCESS BEFORE OUTPUT.
MODULE FILL_0130.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0130.
flow logic for screen 140
PROCESS BEFORE OUTPUT.
MODULE FILL_0140.
PROCESS AFTER INPUT.
Reward points if useful
Regards,
Priyanka.

All help me to find this program its really import...

i've nokia 6500 slide
u know its s40 i searched on a program to make my cam into a webcam but i just found .sis programs for symbian 60 so pls help me all to find a program for that

The only one that i've seen that's compatible with series 40 is this this one.
Message Edited by psychomania on 12-Jun-2008 08:32 AM

Links in Windows (7, 64-bit) doesn't open, getting error:" [link] Can't find the program", help!?

Everytime I click a link that's not in the actual browser window, could be from a word doc, pdf-file or just plain info link in windows gadgets, I get an error:
[Clicked link]
Can't find the program
I have:
Windows 7 64-bit
Firefox 4 RC 1
Firefox is standard browser and installed at default location.
please help, it's getting really annoying!!

This is what I get when opening a link from Outlook 2010.
Windows 7 64bit
Firefox 4 RC
Firefox 4 is set as the default browser
Links won't open in FF4 from any external programs (tweetdeck, outlook, word, etc.)

I keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get it when I either try to open it from the Start menu or from the desktop icon.

I've just installed Firefox on my laptop and keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get this message whenever I either try to open it from the Start menu or from the desktop icon. I've never gotten it to work and even uninstalled it and then redownloaded it and still cannot get it to open. Any help would be greatly appreciated!!!!

Are you installing from the official site? http://www.mozilla.com/firefox
If you use Windows Explorer (My Computer) to check that path, is the Mozilla Firefox folder there? That is the normal installation location, but I think it's worth checking.
If the folder isn't there or firefox.exe is not in it, I wonder whether some other software might be interfering. You might want to run some supplemental security scans. These two tools are highly regarded:
Malwarebytes Anti-malware : http://www.malwarebytes.org/products/malwarebytes_free
SUPERAntiSpyware : http://www.superantispyware.com/

How to find a program, which is using "Z" variant

Hi All,
I know only on custom devloped variant name, say "ZTEST". I do not know, which program is using it. Entry is there in TVARV table.
Please let me know, how can I find the program, which is using that variant.
Thanking you,
Chetan Shah

Hi Chetan,
The variants for a report will be stored in the table <b>VARI</b>.
Give your variant name to the field VARI-VARIANT and it will give the report name in the field VARI-REPORT.
If you have same variant for the other reports, then it will shows the list of reports which the same variant name.
I am working on ECC 5.0 and able to see this table.
Thanks,
Vinay

How to find a program which modifies the variant of a standard program?

Hi,
I have an issue where the variant values of the standard program RKEVEXT3 (Transaction : KEFC), is getting changed by a background job.I need to find the program which modifies the values of the variant.
Any input on this will be helpful.
Regards,
Raj

hi Raj,
you can change variants with FM RS_VARIANT_CHANGE. I would suggest to run a where used list for this variant in your system.
hope this helps
ec

How can we pass the select-option value to modulepool program?

hi,
how can we pass the select-option value to modulepool program ?
Because if i declared select-options in executable program and i used SSCRFIELDS to define push buttons in selection screen.
           My requirement if enter the values to select-options and press UPDATE pussbotton then i want call screen which contains tablecontrol.
           How i get select-option values to PAI of call screen for getting the data from database table to my internal table?

Oh I thought that you have selection-screen and again you are working on dialog programming.
if you want to use select-option directly in module pool then it is not possible.
but you can do other way.
create two varaiables
data : v_kun_low like kna1-kunnr,
         v_kun_high like kna1-kunnr.
use these two variables in layout ,let user knows that he can not give options like gt,lt,eq ,it will be always BT.
and also when you see normal report program,you can use multiple values in either low or high,but here it is not possibel.
use can enter only low value and high value.
when you come to program point of view
declare one range
ranges r_kunnr for kna1-kunnr.
do the coding like
r_kunnr-low = v_kun_low.
r_kunnr-high = v_kun_high.
r_kunnr-options = 'BT'.
r_kunnr-sign = 'I'.
append r_kunnr.
now you can use r_kunnr in select query ,it will work like select-option.
other than this there is no option.
Thanks
Seshu

How do I find the program that is creating a debug file

Hi,
I have a bunch of debug files in /usr/tmp directory on a Unix box. I am using Oracle Apps 11i. How do I find which program is causing this file?
There content of the debug files does not have much information to point to any particular program.
Thanks
Asgar

Thanks for the update.
The user is oracle and group is dba. I know from the name of the file that it is coming from oracle apps (somewhere in a custom program).
Asgar

I have a hp C410 all-in-one series printer. When I updated to 10.8.1 it was no longer supported. HP told me to go to the Apple system updates and download an installation program. I can't find that program in my Apple updates file.

I have a hp C410 all-in-one series printer. When I updated to 10.8.1 it was no longer supported. HP told me to go to the Apple system updates and download an installation program update. I can't find that program in my Apple updates file. Please help.

From the HP Support site, this may help:)
"Re: Problem with latest HP software update for Mountain Lion and HP Photosmart Premier C410.
Options
08-10-2012 10:54 AM
Download and install this: http://support.apple.com/kb/DL907
Reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it."
Hope this helps

HT2188 i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/s

i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/software for my device even though i have the latest itunes on my computer. i have tried reinstalling itunes but it still cannot find my phone and now i cannot use my phone as it is stuck on the sync to itunes screen

Have you downloaded and installed the latest version of iTunes from here:
http://www.apple.com/itunes/download/

I get a message that itunes has stopped working. When I check out why it is because of the dep security on my computer. When I try to find the program for itunes for the .exe file i cannot find it to turn off the dep for that file

I get a message that itunes has stopped working. When I check out why it is because of the dep security on my computer. When I try to find the program for itunes for the .exe file i cannot find it to turn off the dep for that file

I found the file but when I added it to the list for the Data Execution Program to ignore , I received a message that the Program.x86/itunes file must have the DEP on in order to run. Anyone else having this problem ?

HOw to find Report program associated module pool program?

HOw to find Report program associated module pool program?
I.e
Me21n is the tcode.I want to find screens related to this tcode.
Associated report program is RM_MEPO_GUI.(It has no screens hence it is a report program).
(if module program is attached to tcode,i can easily find entries in d020s)
Here report program is calling a module pool program SAPLMEGUI(Has screens).
If i give the Tcode Me21n,i want to list out all the screens of it..
Can u give any suggestion....

Hi Sampath.
Manually i can see it (by seeing in system-status)..
programmatically i want to know..
for ex:if u take Tcode:Va01
we can get program (dialog) and tcode in Tstc table .
If we know the program name(dialog), we can find program and screens in d020s table.
Va01 is atatched to a module pool program..No problem to find screens..
In case of me21n,
It is atatched to report program(calling module pool program)..
Here i could not be able to get the screens ..
I think u undrstood my problem..

How to find standard Programs for perticular prog.

Hi Abapers,
How to find standard program is avalible or not in SAP to up load data for vendor master updataion ... through BDC or LSMW or BAPI ? .
If standard program is avalible in SAP . we can use it to upload ?.

hi madhu
yes we can upload the data , we can use the Direct input methods to upload the vendor master using LSMW tool . As goutham suggested use RFBIKR00 to upload the vendor master.
~linganna

Whr to find modulepool program of aTransaction

Similar Messages

Maybe you are looking for