Wht r color codes in ALV rep for EMPHASIZE, like C500?

Hi Experts,
Am looking to color the column in ALV report......so, am using EMPHASIZE in filed catalg, am using C 500.......working fine.
So, pls. let me know, What r the other colors & their #, like C500?
thanq

You can find answer in next link:
Coloring Cells/rows in ALV Grid.
Best regards.

Similar Messages

  • Color Codes for ALV

    Dear All,
    I want to show the colored rows on ALV depending on conditions.
    Depending upon the conditions, row may have different colors.
    So, from where I can find that color codes (Like for Green - Color Code is 'C500')?
    I anyone have the Codes please provide the color Code else, please provide the reference link or reference Document.
    Waiting for reply.
    Thanks and Best regards,
    Prasad

    The follow program demonstrates how to change the colour of individual rows of an ALV grid. Changes required
    from a basic ALV grid include adding a new field to ALV grid data table(it_ekko), Populating this field with color
    attribute and adding an entry to layout control table.
    *& Report  ZDEMO_ALVGRID                                               *
    *& Example of a simple ALV Grid Report                                 *
    *& The basic ALV grid, Enhanced to display each row in a different     *
    *& colour                                                              *
    REPORT  zdemo_alvgrid                 .
    TABLES:     ekko.
    type-pools: slis.                                 "ALV Declarations
    *Data Declaration
    TYPES: BEGIN OF t_ekko,
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      statu TYPE ekpo-statu,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
      menge TYPE ekpo-menge,
      meins TYPE ekpo-meins,
      netpr TYPE ekpo-netpr,
      peinh TYPE ekpo-peinh,
      line_color(4) type c,     "Used to store row color attributes
    END OF t_ekko.
    DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
          wa_ekko TYPE t_ekko.
    *ALV data declarations
    data: fieldcatalog type slis_t_fieldcat_alv with header line,
          gd_tab_group type slis_t_sp_group_alv,
          gd_layout    type slis_layout_alv,
          gd_repid     like sy-repid.
    *Start-of-selection.
    START-OF-SELECTION.
    perform data_retrieval.
    perform build_fieldcatalog.
    perform build_layout.
    perform display_alv_report.
    *&      Form  BUILD_FIELDCATALOG
          Build Fieldcatalog for ALV Report
    form build_fieldcatalog.
    There are a number of ways to create a fieldcat.
    For the purpose of this example i will build the fieldcatalog manualy
    by populating the internal table fields individually and then
    appending the rows. This method can be the most time consuming but can
    also allow you  more control of the final product.
    Beware though, you need to ensure that all fields required are
    populated. When using some of functionality available via ALV, such as
    total. You may need to provide more information than if you were
    simply displaying the result
                  I.e. Field type may be required in-order for
                       the 'TOTAL' function to work.
      fieldcatalog-fieldname   = 'EBELN'.
      fieldcatalog-seltext_m   = 'Purchase Order'.
      fieldcatalog-col_pos     = 0.
      fieldcatalog-outputlen   = 10.
      fieldcatalog-emphasize   = 'X'.
      fieldcatalog-key         = 'X'.
    fieldcatalog-do_sum      = 'X'.
    fieldcatalog-no_zero     = 'X'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'EBELP'.
      fieldcatalog-seltext_m   = 'PO Item'.
      fieldcatalog-col_pos     = 1.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'STATU'.
      fieldcatalog-seltext_m   = 'Status'.
      fieldcatalog-col_pos     = 2.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'AEDAT'.
      fieldcatalog-seltext_m   = 'Item change date'.
      fieldcatalog-col_pos     = 3.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MATNR'.
      fieldcatalog-seltext_m   = 'Material Number'.
      fieldcatalog-col_pos     = 4.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MENGE'.
      fieldcatalog-seltext_m   = 'PO quantity'.
      fieldcatalog-col_pos     = 5.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MEINS'.
      fieldcatalog-seltext_m   = 'Order Unit'.
      fieldcatalog-col_pos     = 6.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'NETPR'.
      fieldcatalog-seltext_m   = 'Net Price'.
      fieldcatalog-col_pos     = 7.
      fieldcatalog-outputlen   = 15.
      fieldcatalog-datatype     = 'CURR'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'PEINH'.
      fieldcatalog-seltext_m   = 'Price Unit'.
      fieldcatalog-col_pos     = 8.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    endform.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
          Build layout for ALV grid report
    form build_layout.
      gd_layout-no_input          = 'X'.
      gd_layout-colwidth_optimize = 'X'.
      gd_layout-totals_text       = 'Totals'(201).
    Set layout field for row attributes(i.e. color)
      gd_layout-info_fieldname =      'LINE_COLOR'.
    gd_layout-totals_only        = 'X'.
    gd_layout-f2code            = 'DISP'.  "Sets fcode for when double
                                            "click(press f2)
    gd_layout-zebra             = 'X'.
    gd_layout-group_change_edit = 'X'.
    gd_layout-header_text       = 'helllllo'.
    endform.                    " BUILD_LAYOUT
    *&      Form  DISPLAY_ALV_REPORT
          Display report using ALV grid
    form display_alv_report.
      gd_repid = sy-repid.
      call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                i_callback_program      = gd_repid
               i_callback_top_of_page   = 'TOP-OF-PAGE'  "see FORM
               i_callback_user_command = 'USER_COMMAND'
               i_grid_title           = outtext
                is_layout               = gd_layout
                it_fieldcat             = fieldcatalog[]
               it_special_groups       = gd_tabgroup
               IT_EVENTS                = GT_XEVENTS
                i_save                  = 'X'
               is_variant              = z_template
           tables
                t_outtab                = it_ekko
           exceptions
                program_error           = 1
                others                  = 2.
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    endform.                    " DISPLAY_ALV_REPORT
    *&      Form  DATA_RETRIEVAL
          Retrieve data form EKPO table and populate itab it_ekko
    form data_retrieval.
    data: ld_color(1) type c.
    select ebeln ebelp statu aedat matnr menge meins netpr peinh
    up to 10 rows
      from ekpo
      into table it_ekko.
    *Populate field with color attributes
    loop at it_ekko into wa_ekko.
    Populate color variable with colour properties
    Char 1 = C (This is a color property)
    Char 2 = 3 (Color codes: 1 - 7)
    Char 3 = Intensified on/off ( 1 or 0 )
    Char 4 = Inverse display on/off ( 1 or 0 )
              i.e. wa_ekko-line_color = 'C410'
      ld_color = ld_color + 1.
    Only 7 colours so need to reset color value
      if ld_color = 8.
        ld_color = 1.
      endif.
      concatenate 'C' ld_color '10' into wa_ekko-line_color.
    wa_ekko-line_color = 'C410'.
      modify it_ekko from wa_ekko.
    endloop.
    endform.                    " DATA_RETRIEVAL

  • ALV color codes

    Hi all,
    I understand that the ALV grid color codes consists of the following format:
    CXYZ
    X = 0 - 7
    Y,Z = 0 - 1
    Is there any way to display color other than the above? I need a dark grey color (the color when the grid is set to not editable). Is there anywhere to do that? The intensity option is not helping much.
    Thanks in advance.

    Hi,
    Herewith i am sending for the sample code with alv grid report.
    REPORT  YMS_COLOURALV NO STANDARD PAGE HEADING.
    TYPE-POOLS: SLIS, ICON.
    DATA: FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
    DATA: BEGIN OF IMARA OCCURS 0,
              LIGHT(4) TYPE C,
              MATNR TYPE MARA-MATNR,
              MTART TYPE MARA-MTART,
              MAKTX TYPE MAKT-MAKTX,
              COLOR_LINE(4) TYPE C,
              TCOLOR TYPE SLIS_T_SPECIALCOL_ALV,  "cell
          END OF IMARA.
    DATA: XCOLOR TYPE SLIS_SPECIALCOL_ALV.
    START-OF-SELECTION.
      PERFORM GET_DATA.
      PERFORM WRITE_REPORT.
    Get_Data
    FORM GET_DATA.
      WRITE ICON_GREEN_LIGHT AS ICON TO IMARA-LIGHT.
          IMARA-MATNR = 'ABC'.
          IMARA-MTART = 'ZCFG'.
          IMARA-MAKTX = 'This is description for ABC'.
      APPEND IMARA.
      WRITE ICON_YELLOW_LIGHT AS ICON TO IMARA-LIGHT.
          IMARA-MATNR = 'DEF'.
          IMARA-MTART = 'ZCFG'.
          IMARA-MAKTX = 'This is description for DEF'.
      APPEND IMARA.
      WRITE ICON_RED_LIGHT AS ICON TO IMARA-LIGHT.
          IMARA-MATNR = 'GHI'.
          IMARA-MTART = 'ZCFG'.
          IMARA-MAKTX = 'This is description for GHI'.
      APPEND IMARA.
      LOOP AT IMARA.
        IF SY-TABIX = 1.
          IMARA-COLOR_LINE = 'C410'.     " color line
        ENDIF.
        IF SY-TABIX = 2.                "  color CELL
          CLEAR XCOLOR.
          XCOLOR-FIELDNAME = 'MTART'.
          XCOLOR-COLOR-COL = '3'.
          XCOLOR-COLOR-INT = '1'.       " Intensified on/off
          XCOLOR-COLOR-INV = '0'.
          APPEND XCOLOR TO IMARA-TCOLOR.
        ENDIF.
        MODIFY IMARA.
      ENDLOOP.
    ENDFORM.                    "get_data
    WRITE_REPORT
    FORM WRITE_REPORT.
      DATA: LAYOUT TYPE  SLIS_LAYOUT_ALV.
      LAYOUT-COLTAB_FIELDNAME = 'TCOLOR'.
      LAYOUT-INFO_FIELDNAME = 'COLOR_LINE'.
      PERFORM BUILD_FIELD_CATALOG.
    CALL ABAP LIST VIEWER (ALV)
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          IS_LAYOUT   = LAYOUT
          IT_FIELDCAT = FIELDCAT
        TABLES
          T_OUTTAB    = IMARA.
    ENDFORM.                    "write_report
    BUILD_FIELD_CATALOG
    FORM BUILD_FIELD_CATALOG.
      DATA: FC_TMP TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
      CLEAR: FIELDCAT. REFRESH: FIELDCAT.
      CLEAR: FC_TMP.
      FC_TMP-REPTEXT_DDIC    = 'Status'.
      FC_TMP-FIELDNAME  = 'LIGHT'.
      FC_TMP-TABNAME   = 'IMARA'.
      FC_TMP-OUTPUTLEN  = '4'.
      FC_TMP-ICON       = 'X'.
      APPEND FC_TMP TO FIELDCAT.
      CLEAR: FC_TMP.
      FC_TMP-REPTEXT_DDIC    = 'Material Number'.
      FC_TMP-FIELDNAME  = 'MATNR'.
      FC_TMP-TABNAME   = 'IMARA'.
      FC_TMP-OUTPUTLEN  = '18'.
      APPEND FC_TMP TO FIELDCAT.
      CLEAR: FC_TMP.
      FC_TMP-REPTEXT_DDIC    = 'Material Type'.
      FC_TMP-FIELDNAME  = 'MTART'.
      FC_TMP-TABNAME   = 'IMARA'.
      FC_TMP-OUTPUTLEN  = '10'.
      APPEND FC_TMP TO FIELDCAT.
      CLEAR: FC_TMP.
      FC_TMP-REPTEXT_DDIC    = 'Material'.
      FC_TMP-FIELDNAME  = 'MAKTX'.
      FC_TMP-TABNAME   = 'IMARA'.
      FC_TMP-OUTPUTLEN  = '40'.
      FC_TMP-EMPHASIZE = 'C610'.   " color column
      APPEND FC_TMP TO FIELDCAT.
    ENDFORM.                    "build_field_catalog
    Thanks,
    Shankar

  • Setting color codes for more than one photo at a time

    Is there any way to set color codes for more than one photo at a time?

    Hi John,
    I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
    As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
    For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
    To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
    I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
    My workflow is
    1. I first separate all images by event. I do that at the time of import.
    2. I do a fast pass rejecting all the obviously bad images
    3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
    4. I then select the images to be used by color code.
    5. Next I process the final images (crop develop etc) by collection.
    6. Last I output the set according to client requirement.
    If you have a better workflow, I am all ears.
    By the way, what is your photo specialty and where are you located?
    Jim

  • [Solved] Looking for arch's original man page color codes

    Hey everyone. I'm new to arch, and enjoying having everything begin to work out for me. One thing I was wondering though is what the color codes are that the man pages use before X is loaded or anything similar.
    Per the archwiki, I'm using the following to provide myself with colored man pages in urxvt:
    From .Xresources:
    ! colored man pages on rxvt-unicode-256color
    URxvt.colorIT: #87af5f
    URxvt.colorBD: #d7d7d7
    URxvt.colorUL: #87afd7
    This works, but it's not the same colorscheme as what arch starts out with initially. Anyone know what that colorscheme is? Or where I could look to find it?
    Last edited by zematis (2014-05-12 22:21:30)

    ayekat, thanks for the warm welcome!
    ayekat wrote:What article in the wiki?
    Here's the section in the Wiki I was referring to:
    https://wiki.archlinux.org/index.php/ma … vt-unicode
    karol wrote:Are you talking about using man pages before installing Arch or after installing but in the tty? Do you want to get the same colors in X?
    (I think) I was talking about the colors that the man pages are in the TTY. Specifically, my processes is:
    Boot up arch
    Login (X yet not started)
    Look at a man page - like the colors
    Startx - boot to window manager (i3)
    Look at a man page - want to change the colors
    That said, I liked the colors the man pages had before installing Arch quite a bit, and wouldn't object to learning what those are.
    ayekat wrote:Here you are changing how urxvt displays characters that are marked as underline, italic or bold; in particular you are changing their colours.
    The thing is, it won't only affect man pages viewed in urxvt, but everything.
    Makes sense
    ayekat wrote:As for changing the colour scheme of the manpage, you'll probably want to do it more properly, using the LESS_TERMCAP environment variables.
    I tried copying your format to my .bashrc and it worked great! So that's a win. Now I just need to figure out what the '\e[#;#;#m' numbers mean. I think I can probably handle that one on my own though. I found a resource here at:
    http://misc.flogisoft.com/bash/tip_colo … ng#colors2
    And it looks like it covers what I need to know.
    Thanks for your help!
    And honestly, at this point I think I can figure out what colorscheme I like given the info at hand. So I think we can call this one taken care of.
    If it interests anyone, I found a .sh script at the above link to display all 256 colors, then modified it to show the colors bolded, italicized etc. Here's the script:
    #!/bin/bash
    # This program is free software. It comes without any warranty, to
    # the extent permitted by applicable law. You can redistribute it
    # and/or modify it under the terms of the Do What The Fuck You Want
    # To Public License, Version 2, as published by Sam Hocevar. See
    # http://sam.zoy.org/wtfpl/COPYING for more details.
    for coltype in {0..8} ; do # Bold, Italic etc.
      for fgbg in 38 48 ; do #Foreground/Background
        for color in {0..256} ; do #Colors
          #Display the color
          echo -en "\e[(0${coltype});(${fgbg};5;${color}m ${color}\t\e[0m"
          #Display 10 colors per lines
          if [ $((($color + 1) % 10)) == 0 ] ; then
            echo #New line
          fi
        done
        echo #New line
        echo #New line
      done
      echo #New line
    done
    exit 0

  • "Custom" grouping and / or colored lines in ALV

    Hi!
    Two questions:
    1. Is it possible to use colors in the ALV for a given set of rows? I'd like to mark rows with a color, which are logically belongs together.
    2. Other approach would be to sort the ALV and via that the "similar" rows (i.e. some column values in the rows have the same value ) would be grouped.
    The normal ALV grouping feature is too general. E.g if the ALV contains a lot of empty cells, then those cells will be grouped as well, nevertheless they are logically don't belong together -> looks quite weird.
    If the custom grouping cannot be realized, then my approach would be the following:
    1. Sorting the table. -> rows where the content partially equal are in succession.
    2. Manually clear the cells in the second (in my business case only two lines can be partially equal, others are unique) row, which are the same as in the previous row.
    3. Use coloring to indicate that these two lines are belonging together.
    Best regards,
    Peter

    Hi Peter,
    It is possible to assign colors to a specific row. But you need to have some work around.
    You have to create an extra attribute for each column that you have in your table. The type of that attribute should be of WDUI_TABLE_CELL_DESIGN.
    After Instatiating your ALV Component you have to use the following statement for the column that you have to apply the color.
    ls_column-r_column->set_cell_design_fieldname( COLUMN1_DESIGN ). Assuming ls_column-r_column will have COLUMN1 as filed name.
    There are 16 colors that are defined and each combination from '00' to '15' will define one color.
    Look at the structure below.  Its a table with 4 columns(2nd and 4th represents colors for first and third columns)
    value11          00            value12          00
    value21          00            value22          00
    value31          02            value32          02.
    If you consider the above struture as your output table 3 rows and 4 columns  then your third row will be highlighted in green color because 02 represents green. You can hide your second column and fourth column in above example because they represents colors. Use the following statement to hide those columns.
    ls_column-r_column->set_visible(
                     cl_wd_uielement=>e_visible-none ). "ls_column-r_column will have 'COLUMN1_DESIGN'
    Let me know if you know more code.
    Thank You,
    Gajendra.

  • Cell Color Yellow in ALV

    Hi Team,
    I have a scenario where the ALV table cells are colored based on certain rules. I have successfully achieved this by using the ALV Cell Design. I have a problem specifically with the Cell Design Code = "18", Cell Design Value = " TWO". This color is a pure yellow and when used, it forcefully aligns the cell values to LEFT and the font size is reduced. We specifically need this color in our application. Anyone faced this problem?
    Is this a bug in the Cell Design option for code "18"? Is there any other way I can get this color in the ALV cell?
    Please help. Any pointers will be appreciated.
    Thanks for your time.
    Best Regards
    Sanjay

    Hi Team,
    Any thoughts on this issue? Is this a standard bug or there is another way to achieve the same functionality? I tried using cell variants also, but the "Text View" and "Input Field" don't have a background color attribute for them.
    Any pointers?
    Thanks
    Sanjay

  • How Alternate rows to be colored  in an ALV Grid report?

    How Alternate rows to be colored  in an ALV Grid report?

    hi,
    try this
    TABLES:     ekko.
    TYPE-POOLS: slis.                                 "ALV Declarations
    *Data Declaration
    TYPES: BEGIN OF t_ekko,
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      statu TYPE ekpo-statu,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
      menge TYPE ekpo-menge,
      meins TYPE ekpo-meins,
      netpr TYPE ekpo-netpr,
      peinh TYPE ekpo-peinh,
      line_color(4) TYPE c,     "Used to store row color attributes
    END OF t_ekko.
    DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
          wa_ekko TYPE t_ekko.
    *ALV data declarations
    DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
          gd_tab_group TYPE slis_t_sp_group_alv,
          gd_layout    TYPE slis_layout_alv,
          gd_repid     LIKE sy-repid.
    *Start-of-selection.
    START-OF-SELECTION.
      PERFORM data_retrieval.
      PERFORM build_fieldcatalog.
      PERFORM build_layout.
      PERFORM display_alv_report.
    *&      Form  BUILD_FIELDCATALOG
          Build Fieldcatalog for ALV Report
    FORM build_fieldcatalog.
      fieldcatalog-fieldname   = 'EBELN'.
      fieldcatalog-seltext_m   = 'Purchase Order'.
      fieldcatalog-col_pos     = 0.
      fieldcatalog-outputlen   = 10.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'EBELP'.
      fieldcatalog-seltext_m   = 'PO Item'.
      fieldcatalog-col_pos     = 1.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'STATU'.
      fieldcatalog-seltext_m   = 'Status'.
      fieldcatalog-col_pos     = 2.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'AEDAT'.
      fieldcatalog-seltext_m   = 'Item change date'.
      fieldcatalog-col_pos     = 3.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'MATNR'.
      fieldcatalog-seltext_m   = 'Material Number'.
      fieldcatalog-col_pos     = 4.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'MENGE'.
      fieldcatalog-seltext_m   = 'PO quantity'.
      fieldcatalog-col_pos     = 5.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'MEINS'.
      fieldcatalog-seltext_m   = 'Order Unit'.
      fieldcatalog-col_pos     = 6.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'NETPR'.
      fieldcatalog-seltext_m   = 'Net Price'.
      fieldcatalog-col_pos     = 7.
      fieldcatalog-outputlen   = 15.
      fieldcatalog-datatype     = 'CURR'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'PEINH'.
      fieldcatalog-seltext_m   = 'Price Unit'.
      fieldcatalog-col_pos     = 8.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
    ENDFORM.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
          Build layout for ALV grid report
    FORM build_layout.
      gd_layout-no_input          = 'X'.
      gd_layout-colwidth_optimize = 'X'.
      gd_layout-info_fieldname =      'LINE_COLOR'.
    ENDFORM.                    " BUILD_LAYOUT
    *&      Form  DISPLAY_ALV_REPORT
          Display report using ALV grid
    FORM display_alv_report.
      gd_repid = sy-repid.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program = gd_repid
          is_layout          = gd_layout
          it_fieldcat        = fieldcatalog[]
          i_save             = 'X'
        TABLES
          t_outtab           = it_ekko
        EXCEPTIONS
          program_error      = 1
          OTHERS             = 2.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " DISPLAY_ALV_REPORT
    *&      Form  DATA_RETRIEVAL
          Retrieve data form EKPO table and populate itab it_ekko
    FORM data_retrieval.
      DATA: ld_color(1) TYPE c.
      SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
       UP TO 10 ROWS
        FROM ekpo
        INTO TABLE it_ekko.
    *Populate field with color attributes
      LOOP AT it_ekko INTO wa_ekko.
    Populate color variable with colour properties
    Char 1 = C (This is a color property)
    Char 2 = 3 (Color codes: 1 - 7)
    Char 3 = Intensified on/off ( 1 or 0 )
    Char 4 = Inverse display on/off ( 1 or 0 )
              i.e. wa_ekko-line_color = 'C410'
        ld_color = ld_color + 1.
    Only 7 colours so need to reset color value
        IF ld_color = 8.
          ld_color = 1.
        ENDIF.
        CONCATENATE 'C' ld_color '10' INTO wa_ekko-line_color.
    wa_ekko-line_color = 'C410'.
        MODIFY it_ekko FROM wa_ekko.
      ENDLOOP.
    ENDFORM.                    " DATA_RETRIEVAL

  • Why won't the color code I am trying to use from a windows machine work on my Mac? Code: PMS7409

    Hi I'm an intern at a telecommunications and management company who are about to release an update on their website and server screens. My job is to create the new graphics and remake the presentation layers. I am also assigned to create a business card template, which is where my question comes. I am give a color code, from a Windows OS, and try to input that code into Photoshop CS6. That color code won't appear. It's a deep orange and the code I am being told is; PMS7409. I'm not sure thats a code (atleast on the Mac), but I haven't used a Windows OS in so long I don't even know if Windows has their own color coding system or what. Can someone help me out and tell me if this is me, my boss, or we're missing something and I'm going to look like an idiot?

    Definitely not a colour code for mac, the only thing I suggest you do is if you get the code on your windows version is to get the other values i.e
    instead and input those into it rather than the #colour code (Hue, Sat, B, R, G B) etc.
    Also ... Colour codes are 6 figures long i.e the one displayed and also black #000000 and white #ffffff
    however the one you gave is 7!
    Message was edited by: ConstantAngel

  • ALV report for 5 Grids using Objects and Method

    I have few questions in ALV 5Grids ,could you please correct me in the following program logic...
    Using this program logic i am able to generate the five Grids and able to populate Header details from VBAK into Grid1,If you click in the Grid 1 and it is populating item details in Grid2 from VBAP,parallally populating the customer data in Grid5 from KNA1.
    Now the pending issue is ,
    if you click in the Grid2 then we should populate the shipping details in Grid3 and
    if you click in the Grid3 then we should populate the billing details in Grid4.
    Program Logic;
    REPORT  ZAREPAS20.
    Tables : vbak,vbap,likp,lips,vbrk,vbrp,kna1.
    DATA : OK_CODE              LIKE        SY-UCOMM,
           G_CONTAINER          TYPE SCRFNAME VALUE 'BCALV7_GRID_DEMO_0100_VASU',
           DOCKING              TYPE REF TO CL_GUI_DOCKING_CONTAINER,
           SPLITTER_1           TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
           SPLITTER_2           TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
           splitter_3           TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
           CELL_TOP1            TYPE REF TO CL_GUI_CONTAINER,
           CELL_BOTTOM1         TYPE REF TO CL_GUI_CONTAINER,
           CELL_TOP2            TYPE REF TO CL_GUI_CONTAINER,
           CELL_BOTTOM2         TYPE REF TO CL_GUI_CONTAINER,
           CELL_LEFT            TYPE REF TO CL_GUI_CONTAINER,
           CELL_middle          TYPE REF TO CL_GUI_CONTAINER,
           CELL_RIGHT           TYPE REF TO CL_GUI_CONTAINER,
           GRID1                TYPE REF TO CL_GUI_ALV_GRID,
           GRID2                TYPE REF TO CL_GUI_ALV_GRID,
           GRID3                TYPE REF TO CL_GUI_ALV_GRID,
           GRID4                TYPE REF TO CL_GUI_ALV_GRID,
           GRID5                TYPE REF TO CL_GUI_ALV_GRID.
    DATA : GT_VBAK              TYPE STANDARD TABLE OF VBAK,
           GT_VBAP              TYPE STANDARD TABLE OF VBAP,
           GT_LIKP              TYPE STANDARD TABLE OF likp,
           GT_LIPS              TYPE STANDARD TABLE OF lips,
           GT_VBRK              TYPE STANDARD TABLE OF vbrk,
           GT_VBRP              TYPE STANDARD TABLE OF vbrp,
           GT_KNA1              TYPE STANDARD TABLE OF kna1.
    DATA:begin of itab1 occurs 0,
         vbeln type likp-VBELN,                            
         erzet type likp-ERZET,                             
         lfart type likp-LFART,                             
         posnr type lips-POSNR,
         END OF ITAB1.
    DATA:begin of itab2 occurs 0,
         vbeln like vbrk-vbeln,                            
         posnr like vbrk-fktyp,                            
         fkart like vbrk-fkart,                             
         fklmg like vbrp-fklmg,                             
         end of itab2.
    *selection screen for selecting range of values
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE text-001.
    select-options: S_vbeln for VBAK-vbeln.     
    selection-screen end of block b1.
          CLASS lcl_eventhandler DEFINITION
    CLASS lcl_eventhandler DEFINITION.
      PUBLIC SECTION.
        CLASS-METHODS:
          handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
            IMPORTING
              e_row
              e_column
              es_row_no
              sender.  " sending control, i.e. ALV grid that raised event
    ENDCLASS.                    "lcl_eventhandler DEFINITION
          CLASS lcl_eventhandler IMPLEMENTATION
    CLASS lcl_eventhandler IMPLEMENTATION.
    METHOD HANDLE_DOUBLE_CLICK.
    *DEFINE LOCAL DATA.
    DATA : itab_vbak type VBAK,
           itab_vbap type VBAP,
           itab_likp type likp,
           itab_lips type lips,
           itab_vbrk type vbrk,
           itab_vbrp type vbrp,
           itab_kna1 type kna1.
    *DISTINGUISH ACCORDING TO SENDING GRID INSTANCE
    CASE SENDER.
    WHEN GRID1.
       READ TABLE gt_VBAK INTO itab_vbak INDEX e_row-index.
           CHECK ( itab_vbak-vbeln IS NOT INITIAL ).
            CALL METHOD GRID1->set_current_cell_via_id
              EXPORTING
                 is_ROW_ID    =
                 is_COLUMN_ID =
                is_row_no    = es_row_no.
            Triggers PAI of the dynpro with the specified ok-code
            CALL METHOD cl_gui_cfw=>set_new_ok_code( 'ORDER_DETAILS' ).
    WHEN GRID2.
            READ TABLE gt_VBAP INTO itab_vbap INDEX e_row-index.
            CHECK ( itab_vbap-vbeln IS NOT INITIAL ).
            CALL METHOD GRID2->set_current_cell_via_id
              EXPORTING
                 is_ROW_ID    =
                 is_COLUMN_ID =
                is_row_no    = es_row_no.
            Triggers PAI of the dynpro with the specified ok-code
            CALL METHOD cl_gui_cfw=>set_new_ok_code( 'ORDER_DETAILS' ).
    WHEN GRID3.
            READ TABLE gt_LIPS INTO itab_LIPS INDEX e_row-index.
            CHECK ( itab_lips-vgbel IS NOT INITIAL ).
            CALL METHOD GRID3->set_current_cell_via_id
              EXPORTING
                 is_ROW_ID    =
                 is_COLUMN_ID =
                is_row_no    = es_row_no.
            Triggers PAI of the dynpro with the specified ok-code
            CALL METHOD cl_gui_cfw=>set_new_ok_code( 'DELIVERY_DETAILS' ).
    WHEN GRID4.
            READ TABLE gt_VBRP INTO itab_VBRP INDEX e_row-index.
            CHECK ( itab_vbrp-vgbel IS NOT INITIAL ).
            CALL METHOD GRID4->set_current_cell_via_id
              EXPORTING
                 is_ROW_ID    =
                 is_COLUMN_ID =
                is_row_no    = es_row_no.
            Triggers PAI of the dynpro with the specified ok-code
            CALL METHOD cl_gui_cfw=>set_new_ok_code( 'BILLING_DETAILS' ).
    WHEN GRID5.
            READ TABLE gt_KNA1 INTO itab_KNA1 INDEX e_row-index.
            CHECK ( itab_kna1-kunnr IS NOT INITIAL ).
          SET PARAMETER ID 'KUN' FIELD itab_KNA1-KUNNR.
           CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
          WHEN OTHERS.
            RETURN.
        ENDCASE.
    endmethod.
    endclass.    "lcl_eventhandler IMPLEMENTATION
    start-of-selection.
    *write :/ 'FEDEX INT''''L' .
    SELECT        * FROM  vbak INTO TABLE gt_VBAK
    where vbeln IN  S_VBELN.
    creating docking container
    create object docking
       exporting
        parent     = cl_gui_container=>screen0
        ratio      = 90
      exceptions
       others      = 6.
      if sy-subrc eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Create splitter container
    CREATE OBJECT splitter_1
        EXPORTING
          parent            = docking
          rows              = 1
          columns           = 3
         NO_AUTODEF_PROGID_DYNNR =
         NAME              =
        EXCEPTIONS
          cntl_error        = 1
          cntl_system_error = 2
          OTHERS            = 3.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Get cell container
      CALL METHOD splitter_1->get_container
        EXPORTING
          row       = 1
          column    = 1
        RECEIVING
          container = cell_left.
      CALL METHOD splitter_1->get_container
        EXPORTING
          row       = 1
          column    = 2
        RECEIVING
          container = cell_middle.
      CALL METHOD splitter_1->get_container
        EXPORTING
          row       = 1
          column    = 3
        RECEIVING
          container = cell_right.
    Create 2nd splitter container
      CREATE OBJECT splitter_2
      EXPORTING
          parent            = cell_left
          rows              = 2
          columns           = 1
         NO_AUTODEF_PROGID_DYNNR =
         NAME              =
        EXCEPTIONS
          cntl_error        = 1
          cntl_system_error = 2
          OTHERS            = 3.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Get cell container
      CALL METHOD splitter_2->get_container
        EXPORTING
          row       = 1
          column    = 1
        RECEIVING
          container = cell_top1.
      CALL METHOD splitter_2->get_container
        EXPORTING
          row       = 2
          column    = 1
        RECEIVING
          container = cell_bottom1.
    Create 3rd splitter container
    CREATE OBJECT splitter_3
        EXPORTING
          parent            = cell_middle
          rows              = 2
          columns           = 1
         NO_AUTODEF_PROGID_DYNNR =
         NAME              =
        EXCEPTIONS
          cntl_error        = 1
          cntl_system_error = 2
          OTHERS            = 3.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Get cell container
      CALL METHOD splitter_3->get_container
        EXPORTING
          row       = 1
          column    = 1
        RECEIVING
          container = cell_top2.
      CALL METHOD splitter_3->get_container
        EXPORTING
          row       = 2
          column    = 1
        RECEIVING
          container = cell_bottom2.
    Create ALV grids
      CREATE OBJECT grid1
        EXPORTING
          i_parent          = cell_top1
        EXCEPTIONS
          OTHERS            = 5.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CREATE OBJECT grid2
        EXPORTING
          i_parent          = cell_bottom1
        EXCEPTIONS
          OTHERS            = 5.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CREATE OBJECT grid3
        EXPORTING
          i_parent          = cell_top2
        EXCEPTIONS
          OTHERS            = 5.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CREATE OBJECT grid4
        EXPORTING
          i_parent          = cell_bottom2
        EXCEPTIONS
          OTHERS            = 5.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CREATE OBJECT grid5
        EXPORTING
          i_parent          = cell_right
        EXCEPTIONS
          OTHERS            = 5.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Set event handler
      SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid1.
      SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid2.
      SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid3.
      SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid4.
      SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid5.
    Display data
      CALL METHOD grid1->set_table_for_first_display
        EXPORTING
          i_structure_name = 'VBAK'
        CHANGING
          it_outtab        = gt_VBAK
        EXCEPTIONS
          OTHERS           = 4.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    REFRESH: gt_vbap.
      CALL METHOD grid2->set_table_for_first_display
        EXPORTING
          i_structure_name = 'VBAP'
        CHANGING
          it_outtab        = gt_VBAP    " empty !!!
        EXCEPTIONS
          OTHERS           = 4.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    REFRESH: gt_LIPS.
      CALL METHOD grid3->set_table_for_first_display
        EXPORTING
          i_structure_name = 'LIPS'
        CHANGING
          it_outtab        = gt_LIPS    " empty !!!
        EXCEPTIONS
          OTHERS           = 4.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    REFRESH: gt_VBRP.
      CALL METHOD grid4->set_table_for_first_display
        EXPORTING
          i_structure_name = 'VBRP'
        CHANGING
          it_outtab        = gt_VBRP    " empty !!!
        EXCEPTIONS
          OTHERS           = 4.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    REFRESH: gt_KNA1.
      CALL METHOD grid5->set_table_for_first_display
        EXPORTING
          i_structure_name = 'KNA1'
        CHANGING
          it_outtab        = gt_KNA1    " empty !!!
        EXCEPTIONS
          OTHERS           = 4.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Link the docking container to the target dynpro
      CALL METHOD docking->link
        EXPORTING
          repid                       = syst-repid
          dynnr                       = '0100'
         CONTAINER                   =
        EXCEPTIONS
          OTHERS                      = 4.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    NOTE: dynpro does not contain any elements (ok_code -> GD_OKCODE)
      CALL SCREEN '0100'.
    Flow logic of dynpro:
    *PROCESS BEFORE OUTPUT.
    MODULE STATUS_0100.
    *PROCESS AFTER INPUT.
    MODULE USER_COMMAND_0100.
    end-of-selection.
    *&      Module  STATUS_0100  OUTPUT
          text
    MODULE STATUS_0100 OUTPUT.
      SET PF-STATUS 'STATUS_0100'.
    SET TITLEBAR 'xxx'.
    Refresh display of detail ALV list
      CALL METHOD grid2->refresh_table_display
       EXPORTING
         IS_STABLE      =
         I_SOFT_REFRESH =
        EXCEPTIONS
          OTHERS         = 2.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Refresh display of detail ALV list
      CALL METHOD grid3->refresh_table_display
       EXPORTING
         IS_STABLE      =
         I_SOFT_REFRESH =
        EXCEPTIONS
          OTHERS         = 2.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Refresh display of detail ALV list
      CALL METHOD grid4->refresh_table_display
       EXPORTING
         IS_STABLE      =
         I_SOFT_REFRESH =
        EXCEPTIONS
          OTHERS         = 2.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Refresh display of detail ALV list
      CALL METHOD grid5->refresh_table_display
       EXPORTING
         IS_STABLE      =
         I_SOFT_REFRESH =
        EXCEPTIONS
          OTHERS         = 2.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDMODULE.                 " STATUS_0100  OUTPUT
    *&      Module  USER_COMMAND_0100  INPUT
          text
    MODULE USER_COMMAND_0100 INPUT.
    CASE SY-UCOMM.
    WHEN 'BACK' OR
         'EXIT'  OR
         'CANCEL'.
         SET SCREEN 0.LEAVE SCREEN.
    USER HAS PUSHED BUTTON "DISPLAY OREDERS"
         WHEN 'ORDER_DETAILS'.
          PERFORM ORDER_SHOW_DETAILS.
          when 'DELIVERY_DETAILS'.
            PERFORM DELIVERY_SHOW_DETAILS.
          WHEN 'BILLING_DETAILS'.
             PERFORM BILLING_SHOW_DETAILS.
         WHEN OTHERS.
    ENDCASE.
    CLEAR : OK_CODE.
    ENDMODULE.                 " USER_COMMAND_0100  INPUT
    *&      Form  ORDER_SHOW_DETAILS
          text
    -->  p1        text
    <--  p2        text
    FORM order_show_details .
    define local data
      DATA:
        ld_row      TYPE i,
        itab_VBAK     TYPE VBAK.
      CALL METHOD grid1->get_current_cell
        IMPORTING
          e_row = ld_row.
      READ TABLE gt_VBAK INTO itab_VBAK INDEX ld_row.
      CHECK ( syst-subrc = 0 ).
      SELECT        * FROM  KNA1 INTO TABLE gt_KNA1
             WHERE  KUNNR  = itab_VBAK-KUNNR.
      SELECT        * FROM  VBAP INTO TABLE gt_VBAP
             WHERE  VBELN  = ITAB_VBAK-VBELN.
    *REFRESH: gt_LIPS.
    ENDFORM.                    " ORDER_SHOW_DETAILS
    *&      Form  DELIVERY_SHOW_DETAILS
          text
    -->  p1        text
    <--  p2        text
    FORM DELIVERY_SHOW_DETAILS .
    define local data
      DATA:
        ld_row      TYPE i,
        itab_VBAP     TYPE VBAP.
      CALL METHOD grid1->get_current_cell
        IMPORTING
          e_row = ld_row.
      READ TABLE gt_VBAP INTO itab_VBAP INDEX ld_row.
      CHECK ( syst-subrc = 0 ).
      SELECT LIKPVBELN LIKPERZET LIKPLFART LIPSVBELN
           INTO CORRESPONDING FIELDS OF TABLE ITAB1
           FROM ( LIKP INNER JOIN LIPS ON LIKPVBELN = LIPSVBELN )
           WHERE LIKP~VBELN IN S_VBELN.
    *REFRESH: gt_LIPS.
    ENDFORM.                    " DELIVERY_SHOW_DETAILS
    *&      Form  BILLING_SHOW_DETAILS
          text
    -->  p1        text
    <--  p2        text
    FORM BILLING_SHOW_DETAILS .
    define local data
      DATA:
        ld_row      TYPE i,
        itab_LIPS     TYPE LIPS.
      CALL METHOD grid1->get_current_cell
        IMPORTING
          e_row = ld_row.
      READ TABLE gt_LIPS INTO itab_LIPS INDEX ld_row.
      CHECK ( syst-subrc = 0 ).
      SELECT VBRKVBELN VBRKFKTYP VBRKFKART VBRPFKLMG
           INTO CORRESPONDING FIELDS OF TABLE ITAB2
           FROM ( VBRK INNER JOIN VBRP ON VBRKVBELN = VBRPVBELN )
           WHERE VBRK~VBELN IN S_VBELN.
    ENDFORM.                    " BILLING_SHOW_DETAILS

    Hi,
    ALV means ABAP List Viewer. Most convenient way to use it is through reuse library (cf.
    transaction se83) available from release 4.6 of SAP R/3.
    ALV is available in two modes: list and grid. List mode is good old list processing with
    standard functionnalities, and grid mode is using a new OCX object displaying grids.
    Classical reports needs more coding to set the horizontal and vertical lines.we need to adjust
    the lines manually.Even interactive also takes lot of code.
    ALV reports reduces the code when compared to classical reports.we use function modules to
    generate the output.
    that r REUSE_ALV_LIST_DISPLAY,REUSE_ALV_GRID_DISPLAY,REUSE_ALV_HIERSEQ_LIST_DISPLAY etc..
    the following threads will give some examples of the functions which you are expecting
    Header
    regarding function module
    hide ALV field
    Simply Display selection parameter values in the ALV OUTPUT
    Drag and drop in a report
    https://www.sdn.sap
    Reprots
    http://www.sapgenie.com/abap/reports.htm
    http://www.allsaplinks.com/material.html
    http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
    ALV
    1. Please give me general info on ALV.
    http://www.sapfans.com/forums/viewtopic.php?t=58286
    http://www.sapfans.com/forums/viewtopic.php?t=76490
    http://www.sapfans.com/forums/viewtopic.php?t=20591
    http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you
    use - ABAP Objects calls or simple function modules.

  • How do I replace image color with an exact html color code?

    I simply want to change the color of a small pic to an existing html color code, 3399CC.  The pic is very simple, and only has one color.  In Photoshop CS4, I go to:  Image -> Adjustments -> Replace Color.  For the new replacement color, when I type in 3399CC, it doesn't give me that color - it gives some other shade of that color.  (I can tell because I use a program that tells me the exact html code a color is when I hover my mouse over it).  It seems the only way to really get the color you want is to adjust the sliders (hue, saturation, and lightness).  But it'd be practically impossible to play around with every increment of those sliders until I get the exact color code.  
    There's got to be a way to simply enter the html color code and have the pic changed to that color.  Does anyone have any idea?

    Turns key.  WhirrRRRrrrrRRRrrrr....  Nothing.  (I answered in the other thread)
    Perhaps I've had too much coffee today, because I just got a clear vision of Bart Simpson, at the board, chalk in hand...
    SRGB IS KING!!!  SRGB IS DEAD!!!  LONG LIVE SRGB!!!
    SRGB IS KING!!!  SRGB IS DEAD!!!  LONG LIVE SRGB!!!
    SRGB IS KING!!!  SRGB IS DEAD!!!  LONG LIVE SRGB!!!
    SRGB IS KING!!!  SRGB IS DEAD!!!  LONG LIVE SRGB!!!
    SRGB IS KING!!!  SRGB IS DEAD!!!  LONG LIVE SRGB!!!
    SRGB IS KING!!!  SRGB IS DEAD!!!  LONG LIVE SRGB!!!
    -Noel

  • Best Calendar App to connect to Google Calendar and color code appointments

    I am looking for a replacement calendar app that will connect to Google Calendar and allow me to color code individual appointments.  I have looked at a ton of apps in the app store but none of them talk about the color coding option I am looking for.  I don't want to do the trial and error thing and waste my time and money. 

    Download Gmail app. itunes.apple.com/us/app/gmail/id422689480?mt=8

  • 3D Map - Color Code and Cursor Tracking

    Hi, I need some help trying to implement some user interface functionality for a program I am developing.
    This will be a tuning tool for automotive ECU. The program will be reading in two signals (Y-axis is RPM, X-Axis is manifold pressure) and use a 2D interpolation to output a Z value to be used in a calculation. There are two pieces I'd like to add to this. 
    1. Color code the cells based on the cell value in relation to the max and in of the entire 2D-Array
    2. Have a live currsor that tracks the current cell of the 2D array and highlights the cells that are being used in the interp calculation so it makes it easier for the user to make changes and calibrate the tables. 
    3. BONUS: An easy way to be able to select a range of cells and increment them by a set amoun or scale them all by an imput amount (like scale range by 90%).
    Basicly, I'd like to recreate some of the user interface functionality of the software shown below in the second picture and the video linked below. 
    VIDEO:    https://www.youtube.com/watch?v=OkVUJCy0sJ4
    VIDEO:   https://www.youtube.com/watch?v=oeZc-ka6ago      (at 16:45 you can see a good example of the currsor tracking through the cells as teh two inputs change)
    -As you drive and the RPM and loading changes there is a blue ball that tracks on the table the current x-y location of the 2D map and the four coresponding cells around the ball are highlighted to show witch of these cells are being used in the calculation so the user can easily alter these cells in real time to tune the output he is looking for. I'd like to be able to highlight, or blink either a single cell closest to the current value, or the 4 corners around it and have it update real time as the user drives the car. 
    Any ideas of how to implement this kind of functionality? The current VI is attached. I should note the x-array and y-array won't necessarily always be constant spacing between cells.
    Thank you for any help in advance!
    Attachments:
    3D Map Color Coded & Currsor.vi ‏17 KB

    Okay, so I made some progress on this. I was able to use an intensity graph to visually color code the relative position of the cells. Is there a way to make the 2D array translucent and overlay the color array intsity graph behind it? is there a better way to do this. 
    I was able to get the closest current cell value to update as black and track around live on the intensity graph. I did this by temporarily setting the cell's value to 0. Is there a way to somehow highlight the actual cell on the 2D-Array instead? 
    The code is attached. I added a random sine wave input to simultate some signals for the x and y input. The Y array now runs in reverse order which made it tricky to get some of the functions to work properly so I had to use a 2D transpose and 1D reverse array to get it back in the right form. There's probably a better way to do this. 
    Any help is great appreciately and rewarded with Kuddos!  
    Attachments:
    3D Map Color Coded & Currsor (Rev B).vi ‏33 KB

  • Color Code is not working, please help

    I am using the color code 080808 from adobe photoshop as my background for my template.  When i put the JPG file into dreamweaver and try to set the page properties in dreamweaver (background) to 080808 it is putting me at pure black.  please help me.080808 is not a pure black its a shade of it.  I need a color code that matches 080808 correctly.  thanks
    I am using adobe CS3

    I'm not quite sure I understand exactly what you are doing, but I ran into something like this myself.  I was creating GIFs in Photoshop -- type on a background color.  I then created DW pages.  I used the same color code for the background color in PS and again for the background color in DW, but when I inserted the images in the page, they did not match.  It turned out that when I created a new file in PS, I was creating it in my default color space, Adobe RGB.  I assumed that when Save For Web converted the file to sRGB, the colors would convert perfectly.  What I found is that I should have been creating my PS files by starting with a new file in sRGB color space.  Once I did that, the background color of my images identically matched the background color of my DW page.
    Hope this helps.
    John

  • Created file in illustrator then opened in photoshop but color code changed?

    I Created file in illustrator and then opened the art in photoshop but the wierd thing is that the color code changed. If you look at the image with you eye the color will look the same to the naked but if you use the eye dripper tool you can see that the color code has changed between illustrator and photoshop.
    Is there a way to make the CMYK color code stay the same?

    In Illustrator the "Edit---> color settings" are set to "North America General Purpose 2" and the that is the same color setting choice in Photoshop.
    For example there is a black color in Illustrator that has this CMYK code "60, 49,47, 100"
    but in photoshop the CMYK code for the same part of the graphic changes to "75, 68, 67, 90"
    This is only one example of many color code changes that are happening and this may look like the same color on the screen but I need them to both have the same code because I am doing specialized printing and need no changes in color codes like this to occur.
    If I have the color setting in both photoshop and illustrator both set exactly the same "Edit---> color settings" then do you know why this color shift would be happening. Please help.

Maybe you are looking for