Why am I not getting responses to my podcast submissions?
Last summer due to financial problems, I was unable to pay for hosting for my website which housed my podcasts. After two months, I was finally able to get it back up in August. Unfortunately, my podcasts were removed from the iTunes store by that point. Since August of 2013, I have been trying to get my podcasts readded many times with zero luck.
First time I tried submitting it, I received the error "This feed was already submitted." Doing a bit of searching, I found that by changing the podcast title a bit, I could get it submitted. I've done that four times. Each time has given me the successful submission and is under review. But then I hear nothing for months. The last time I submitted it to iTunes was January 26, 2014. Again, another successful submission email. Nothing after that. Not in the store, not a rejection email, not a now available on iTunes email either. I am at a loss for what to do. I'm still making episodes, hosting them on my website, and have looked into alternate podcasting services (currently on Stitcher, going to submit to others, too), but I would love to get it readded to iTunes again. Any help would be greatly appreciated.
I had a filter set to send everything to my spam box so thanks for making me look through my boxes before I answered you! Thanks for your help.
All I can get is the 'ping' that Mail uses to tell
me
<snip>
it has downloaded something
Incidentally, there is a ping-like sound when there
is no mail (on a manual check, not a automatic one)
so you are sure it wasn't that one?
mine pings on auto checking if Mail is either minimised or hidden, always has, so I cant explain..... I have 'play sounds' ticked in [General] and Mail checks every 5 mins.
Thanks again.
Similar Messages
-
Could not get response for challenge?
I could succefully use podcast capture to post video to groupblog.
But when I used command line "pcastaction groupblog", it always said that
"ERROR: could not get response for challenge"
But "pcast_post2groupblog" works well for me. I wonder why this happened?
P.S:
I've updated my server to the latest version.If you look at the workflow, there is probably something in there like this:
<string>--otp=##Groups Administrator Username:Groups Administrator Password##</string>
That's a one time pad. I ran into this when troubleshooting our iTunes U workflow from the command line. To get my iTunes U stuff to work from the command line I had to generate a OTP each time, like so:
$sudo pcastconfig --add_access "token" --properties "iTunes U Shared Secret"
Except yours will be different because it's for group blog.... if indeed this is your problem. I only guessed this looking at the stock blog workflow, it uses an OTP.
Hope that was helpful and not way off the mark. -
This article is vague and unhelpful. My iTunes needs help from a pro.
I have over 120,000 songs -- NO movies, TV, radio, or books...
I have other programs which efficiently run things which are not audio-based.
So why can I not get iTunes working well?? It now takes at least 10 secs for any operation to be completed!
That is just plain evil. But I am sure I could do something to help.
All the music is on an 2T external drive.TS1717 as noted in the thread title...
Brigancook, is the library database on the external or just the media? iTunes reevaluates smart playlists and rewrites its database after every action on the library. I've found this can make a library half that size, with a lot of smart playlists, quite sluggish. That said I'm aware part of my problem is aging hardware. Having the database on the internal drive may improve performance if it is currently on the external.
I'd expect to see an exponential relationship between size and response time which may explain what you see. Cutting down on the number of smart playlists might help. If we're really lucky the long awaited iTunes 11 might have streamlined some of the background processes as well as cleaning up the front end.
tt2 -
HT1454 why i can not get video out from my ipod touch after i did the upgrade
why i can not get video out from my ipod touch after i did the upgrade
why i can not get video out from my ipod touch after i did the upgrade
-
Issue: Not getting response when the document is having special chars
Please help following issue: Not getting response when the document is having special chars(Use any doc with special char(ex: &, $, <, >,.....) TestErrorFour.doc
Error message:
System.FormatException: Invalid length for a Base-64 char array. at
System.Convert.FromBase64String(String s) at
Summarize.Summarizer.AccumulateBroadcast(String filedata, String givenWords) in
c:\DocumentSummarizer\App_Code\Summarizer.cs:line 66
Code:
File 1:
import java.io.BufferedReader;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.FileReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.net.HttpURLConnection;
import java.net.URL;
import java.net.URLConnection;
import java.util.Properties;
import org.apache.poi.poifs.filesystem.POIFSFileSystem;
import org.apache.poi.hwpf.*;
import org.apache.poi.hwpf.extractor.*;
import com.lowagie.text.Document;
import com.lowagie.text.pdf.PRTokeniser;
import com.lowagie.text.pdf.PdfReader;
public class DocumentSummarizerClient {
static Properties loadProperties() {
Properties prop = new Properties();
try {
prop.load(DocumentSummarizerClient.class.getClassLoader().getResourceAsStream("vep.properties"));
} catch (Exception ioe) {
ioe.printStackTrace();
return prop;
public String getSummary(String fileName,String noOfWordsOrPercentage ){
String summaryInputData ="";
String summarizedData="";
String summarizerURL = loadProperties().getProperty("Summarizer.serviceURL");
try {
String fileExtension=fileName.substring(fileName.lastIndexOf(".")+1, fileName.length());
if (fileExtension.equalsIgnoreCase("doc")|| fileExtension.equalsIgnoreCase("txt")|| fileExtension.equalsIgnoreCase("pdf")) {
if (fileExtension.equalsIgnoreCase("txt")) {
BufferedReader bufferedReader = new BufferedReader(
new FileReader(fileName));
String line = null;
while ((line = bufferedReader.readLine()) != null) {
summaryInputData += line;
if(fileExtension.equalsIgnoreCase("doc")){
POIFSFileSystem fs = null;
fs = new POIFSFileSystem(new FileInputStream(fileName));
HWPFDocument doc = new HWPFDocument(fs);
WordExtractor we = new WordExtractor(doc);
String[] paragraphs = we.getParagraphText();
for( int i=0; i<paragraphs .length; i++ ) {
paragraphs[i] = paragraphs.replaceAll("\\cM?\r?\n","");
summaryInputData+= paragraphs[i];
if(fileExtension.equalsIgnoreCase("pdf")){
Document document = new Document();
document.open();
PdfReader reader = new PdfReader(fileName);
int pageCount =reader.getNumberOfPages();
for(int i=1;i<=pageCount;i++){
byte[] bytes = reader.getPageContent(i);
PRTokeniser tokenizer = new PRTokeniser(bytes);
StringBuffer buffer = new StringBuffer();
while (tokenizer.nextToken()) {
if (tokenizer.getTokenType() == PRTokeniser.TK_STRING) {
buffer.append(tokenizer.getStringValue());
summaryInputData += buffer.toString();
else{
System.out.println("This is Invalid document. Presntly we support only text,word and PDF documents ");
// String encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
String encoded=Base64Utils.base64Encode(summaryInputData.getBytes());
// encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
String parameters= "base64String="+encoded+"&noOfWordsOrPercentage="+noOfWordsOrPercentage;
summarizedData= postRequest(parameters,summarizerURL);
String slength= "<string xmlns=\"http://tempuri.org/\">";
if(summarizedData.contains("</string>")){
summarizedData= summarizedData.substring(summarizedData.indexOf(slength)+slength.length(),summarizedData.indexOf("</string>"));
summarizedData = replaceVal(summarizedData);
//System.out.println("<?xml version=\"1.0\" encoding=\"utf-8\"?><![CDATA["+summarizedData+"]]>");
// System.out.println("Summarized data "+summarizedData);
if(summarizedData.contains("Please enter the percentage")){
summarizedData="Data given cannot be summarized further";
else{
System.out.println("Data given cannot be summarized further");
summarizedData="";
} catch (FileNotFoundException e) {
return("The File is not found \n\n"+e.toString());
} catch (IOException e) {
return("The File is already in use \n\n"+e.toString());
} catch (Exception e) {
return(e.toString());
return summarizedData;
public static String postRequest(String parameters,String webServiceURL) throws Exception{
Properties systemSettings = System.getProperties();
systemSettings.put("http.proxyHost", loadProperties().getProperty("proxyHost"));
systemSettings.put("http.proxyPort", loadProperties().getProperty("proxyPort"));
System.setProperties(systemSettings);
String responseXML = "";
try {
URL url = new URL(webServiceURL);
URLConnection connection = url.openConnection();
HttpURLConnection httpConn = (HttpURLConnection) connection;
byte[] requestXML = parameters.getBytes();
httpConn.setRequestProperty("Content-Length", String
.valueOf(requestXML.length));
httpConn.setRequestProperty("Content-Type",
"application/x-www-form-urlencoded");
httpConn.setRequestMethod("POST");
httpConn.setDoOutput(true);
httpConn.setDoInput(true);
OutputStream out = httpConn.getOutputStream();
out.write(requestXML, 0, requestXML.length);
out.close();
InputStreamReader isr = new InputStreamReader(httpConn
.getInputStream());
BufferedReader br = new BufferedReader(isr);
String temp;
String tempResponse = "";
while ((temp = br.readLine()) != null)
tempResponse = tempResponse + temp;
responseXML = tempResponse;
br.close();
isr.close();
} catch (java.net.MalformedURLException e) {
System.out
.println("Error in postRequest(): Secure Service Required");
} catch (Exception e) {
System.out.println("Error in postRequest(): " + e.getMessage());
return responseXML;
public String replaceVal(String value) {
if (value == null) {
value = "";
value = value.replace("<", "<");
value = value.replace(">", ">");
value = value.replace("&", "&");
return value;
public static void main(String[] args) {
DocumentSummarizerClient testdoc=new DocumentSummarizerClient();
System.out.println("hello");
testdoc.getSummary("C:\\working_folder\\vep\\UnitTestCases\\VEP1.0\\DocumentSummarizerTestData\\TestErrorFour.doc","100%");
Note: Use any doc with special char(ex: &, $, <, >,.....) TestErrorFour.doc
File 2:
---------public class Base64Utils {
private static byte[] mBase64EncMap, mBase64DecMap;
* Class initializer. Initializes the Base64 alphabet (specified in RFC-2045).
static {
byte[] base64Map = {
(byte)'A', (byte)'B', (byte)'C', (byte)'D', (byte)'E', (byte)'F',
(byte)'G', (byte)'H', (byte)'I', (byte)'J', (byte)'K', (byte)'L',
(byte)'M', (byte)'N', (byte)'O', (byte)'P', (byte)'Q', (byte)'R',
(byte)'S', (byte)'T', (byte)'U', (byte)'V', (byte)'W', (byte)'X',
(byte)'Y', (byte)'Z',
(byte)'a', (byte)'b', (byte)'c', (byte)'d', (byte)'e', (byte)'f',
(byte)'g', (byte)'h', (byte)'i', (byte)'j', (byte)'k', (byte)'l',
(byte)'m', (byte)'n', (byte)'o', (byte)'p', (byte)'q', (byte)'r',
(byte)'s', (byte)'t', (byte)'u', (byte)'v', (byte)'w', (byte)'x',
(byte)'y', (byte)'z',
(byte)'0', (byte)'1', (byte)'2', (byte)'3', (byte)'4', (byte)'5',
(byte)'6', (byte)'7', (byte)'8', (byte)'9', (byte)'+', (byte)'/'};
mBase64EncMap = base64Map;
mBase64DecMap = new byte[128];
for (int i=0; i<mBase64EncMap.length; i++)
mBase64DecMap[mBase64EncMap[i]] = (byte) i;
* This class isn't meant to be instantiated.
private Base64Utils() {
* Encodes the given byte[] using the Base64-encoding,
* as specified in RFC-2045 (Section 6.8).
* @param aData the data to be encoded
* @return the Base64-encoded <var>aData</var>
* @exception IllegalArgumentException if NULL or empty array is passed
public static String base64Encode(byte[] aData) {
if ((aData == null) || (aData.length == 0))
throw new IllegalArgumentException("Can not encode NULL or empty byte array.");
byte encodedBuf[] = new byte[((aData.length+2)/3)*4];
// 3-byte to 4-byte conversion
int srcIndex, destIndex;
for (srcIndex=0, destIndex=0; srcIndex < aData.length-2; srcIndex += 3) {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex] >>> 2) & 077];
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+1] >>> 4) & 017 |
(aData[srcIndex] << 4) & 077];
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+2] >>> 6) & 003 |
(aData[srcIndex+1] << 2) & 077];
encodedBuf[destIndex++] = mBase64EncMap[aData[srcIndex+2] & 077];
// Convert the last 1 or 2 bytes
if (srcIndex < aData.length) {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex] >>> 2) & 077];
if (srcIndex < aData.length-1) {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+1] >>> 4) & 017 |
(aData[srcIndex] << 4) & 077];
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+1] << 2) & 077];
else {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex] << 4) & 077];
// Add padding to the end of encoded data
while (destIndex < encodedBuf.length) {
encodedBuf[destIndex] = (byte) '=';
destIndex++;
String result = new String(encodedBuf);
return result;
* Decodes the given Base64-encoded data,
* as specified in RFC-2045 (Section 6.8).
* @param aData the Base64-encoded aData.
* @return the decoded <var>aData</var>.
* @exception IllegalArgumentException if NULL or empty data is passed
public static byte[] base64Decode(String aData) {
if ((aData == null) || (aData.length() == 0))
throw new IllegalArgumentException("Can not decode NULL or empty string.");
byte[] data = aData.getBytes();
// Skip padding from the end of encoded data
int tail = data.length;
while (data[tail-1] == '=')
tail--;
byte decodedBuf[] = new byte[tail - data.length/4];
// ASCII-printable to 0-63 conversion
for (int i = 0; i < data.length; i++)
data[i] = mBase64DecMap[data[i]];
// 4-byte to 3-byte conversion
int srcIndex, destIndex;
for (srcIndex = 0, destIndex=0; destIndex < decodedBuf.length-2;
srcIndex += 4, destIndex += 3) {
decodedBuf[destIndex] = (byte) ( ((data[srcIndex] << 2) & 255) |
((data[srcIndex+1] >>> 4) & 003) );
decodedBuf[destIndex+1] = (byte) ( ((data[srcIndex+1] << 4) & 255) |
((data[srcIndex+2] >>> 2) & 017) );
decodedBuf[destIndex+2] = (byte) ( ((data[srcIndex+2] << 6) & 255) |
(data[srcIndex+3] & 077) );
// Handle last 1 or 2 bytes
if (destIndex < decodedBuf.length)
decodedBuf[destIndex] = (byte) ( ((data[srcIndex] << 2) & 255) |
((data[srcIndex+1] >>> 4) & 003) );
if (++destIndex < decodedBuf.length)
decodedBuf[destIndex] = (byte) ( ((data[srcIndex+1] << 4) & 255) |
((data[srcIndex+2] >>> 2) & 017) );
return decodedBuf;
issue 2: Exception when passing 2MB .txt file
Steps to reproduce:
Call getSummary() with 2MB .txt file
Actual:
The following exception has occured:
1. Error in postRequest(): Unexpected end of file from server
java.lang.NullPointerException
Please provide your precious feedback/suggestions.
Thanks in advance…..
Edited by: EJP on 15/03/2011 16:52: added code tags. Please use them. Code is unreadable otherwise.Thanks for your response….
This is enhancement project and some one develops long back.
Regarding point (b) You should be using the java.net.URLEncoder to encode URL parameters, not a base64 encoder.
DocumentSummarizerClient.java I am using base64
Ex:
// String encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
String encoded=Base64Utils.base64Encode(summaryInputData.getBytes());
// encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
String parameters= "base64String="+encoded+"&noOfWordsOrPercentage="+noOfWordsOrPercentage;
summarizedData= postRequest(parameters,summarizerURL);
String slength= "<string xmlns=\"http://tempuri.org/\">";
if(summarizedData.contains("</string>")){
summarizedData= summarizedData.substring(summarizedData.indexOf(slength)+slength.length(),summarizedData.indexOf("</string>"));
summarizedData = replaceVal(summarizedData);
//System.out.println("<?xml version=\"1.0\" encoding=\"utf-8\"?><![CDATA["+summarizedData+"]]>");
System.out.println("Summarized data "+summarizedData);
if(summarizedData.contains("Please enter the percentage")){
summarizedData="Data given cannot be summarized further";
Above specific please I need to modify to resolve above issue.
Could you please suggest me what changes I need to do.
Waiting for positive response. -
Why can I not get a gmail account on my macmnini?
Why can I not get a gmail account on my macmnini?
It tells me "unable to confirm account name or password.
But the same name and password worked on my ipad 2.If you have a Gmail account and you've activated 2-step verification, you need to generate a new "application-specific password" in your Google account and enter it in place of your old password in the Keychain Access application.
-
Why can i not get a preview of my emails now in the lock screen anymore
why can i not get a preview of my emails now in the lock screen anymore
I understand your discontent regarding the delayed availability of our reps when you call us juliusb85! We offer other customer service alternative for you like Twitter @VZWSupport and Facebook http://fb.me/Verizon or we can assist you here also. However, please keep in mind that this is a peer to peer forum and while our Social Media team monitors the posts, the best way to get immediate assistance when network issues are suspected is to call 800-922-0204 from a different line to troubleshoot device or send us a message on twitter at @VZWSupport.
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport -
Why can i not get 3G on my iphone 4
why can i not get 3G on my iphone 4?
What did your carrier say when you asked them?
-
In Dreamweaver CC why can i not get any workspace options? Where do I find 'Draw AP div'?
In Dreamweaver CC why can i not get any workspace options? Where do I find 'Draw AP div' or any of my 'designer' tools?
Insertion of APDivs/Layers are deprecated in CC. Historically, APDivs caused many, many problems for people who didn't understand they were not intended to be used as a primary layout tool. Look at FluidGrid Layouts.
http://blogs.adobe.com/dreamweaver/
Nancy O. -
Hi,
I am doing RFC to File. I could generate the FILE successfully. But I am not getting Response from RFC. I am getting empty payload. I am doing with out BPM. I did succesfully File-RFC-File. but here RFC is the sender. I have some doubts in defining Interface mapping and Message Mapping. Is this a Syscronous scenario by default ?
If I want to get the resonse of RFC to a file. How many Receivers and Senders do i need to create?
Regards,
Varun
Edited by: Varun on Sep 9, 2008 1:00 PMhi,
Map Rfc.response to the File; hence rfc sender adapter and file receiver adapter..one sender n 1 receiver.Remember:
1. In the report that makes the call to XI , make sure that you use call RFC in a background task.
2. Make sure you use Commit Work at the end of the report.
Follow:
Send RFC to SAP XI Asynchronous
Also pls visit
Re: RFC to FILE
for the same scenario.
Thanks,
Durga
Edited by: NagaDurga Nannapaneni on Sep 9, 2008 10:55 AM -
I 'm not receiving my emails as they are sent to me. So as soon as I start using my ipad again all my new emails start to download? So why am I not getting emails as they. Are sent to me?
you have your email to set to manual
change the setting in mail/contacs/cal -
Why can I not get the creative cloud to install on my MacBook Air? I keep getting an error saying I need to download a new copy
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
Why did i not get siri with my update to 7.0?
why did i not get siri with my update to 7.0?
Thanks I thought thats the way it was but had some coworkers with a 4 and they got it with the update?
-
Why am I not getting e-mails on my mac when they come in on my iPad?
Why am I not getting new messages on my Mac when they are coming in on my iPad?
Troubleshooting Apple Mail
What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
Troubleshooting sending and receiving email messages -
Why do we not get logging output for the clients?
Q: Why do we not get logging output like #show log all | include <client mac address> for the wireless clients?
A: When the clients connected to Bridge mode SSID, Firewall hits and logging does not work.
This is one of the limitations with bridge mode.logical. fair. I can understand the confusion in policy as another fine cloud service - DropBox - has a different model for increases in free storage amounts for one account = evangelism. As many policies as there are services probably.
cya 'round o' kilted one
CCC
Maybe you are looking for
-
I want to control a bunch of FP devices from one PC and serve this info to some satelites PC who will be on the same network. Most of the time,only the one PC will be interacting with all of the FP devices. In the event this main PC fails, I want to
-
Pages no longer works after adding app store
Added app store this morning, only added the twitter app, and now Pages refuses to open. Doing software updates did not help. iWork 09. Keeps giving me error message that this version of pages not compatible with this operating system...
-
A few blocks in a process, how to return to a specific action in a block?
Good day. I have a process with a few sequential blocks. The first block is completed but I need to return to it from the second block to a specufic action. I added a desicion object to the second block where I defined "Result State" as "Other" and s
-
We have a rather large system where we get a lot of transactions. To tune our system we decided to turn off transaction support for some beans. (by setting the transaction attribute to NotSupported). The system did not decrease the amount of transact
-
A todos: Como puedo reemplazar el caracter '|' que viene en un parametro de un procedure, algo asÃ. CREATE OR REPLACE PROCEDURE Mi_Proc(aParametro IN VARCHAR2) IS v_MiVariable VARCHAR2(30) := aParametro; BEGIN v_MiVariable := REPLACE(aParametro,'|');