Why are frames rendered so badly

Websites that are using frames (boo!), like my bank (ING Netherlands) and my school, are impossible to scroll with. The surrounding frames are not resizing properly and scrolling won't work because the left and right toolbars will popup.

Can you give us more specific details?
Like version of firefox, link for the websites and even more the phone used?
Thank you.

Similar Messages

Why Are Frames So Bad?

This is one of those 'big picture' questions. Sorry for the length. The actual question is at the end.
I don't claim to be much of a 'designer'. I'm a musician.
I have a web site I am trying to update to make 'accessible'. And it uses frames.
http://www.jchmusic.com
I have read the various arguments for not using frames and most of the technical arguments seem a bit spurious (accessibility and search engines both seem to work fine in my tests.) The only one that really makes sense -today- is the inability to bookmark within the site. I have not figured a way around -that-.
But -every- web design article I have read totally disdains the use of frames. It seems far beyond the technical arguments. So I'm hoping to get some input as to -why- this is the case.
I use frames for two main reasons:
1. Manageability. I used to program and the idea of including the same menu code on each page seems ridiculous. Frames seem a lot easier to manage and far less error-prone.
2. I like having the menu stay in one place as the user scrolls. Like a 'real' application. I -hate- how the menu or page title just scrolls off to nowhere on most sites. It just looks ----so---- ugly to me.
Anyhoo, sorry for banging on. Other than the bookmark thing, I wonder why almost no designers use frames. I just don't get it. If I ditch frames, it will be a lot of work so I'm hoping someone who knows what they're doing (unlike me) will help talk me out of my delusions.
TIA,
---JC

1) hard to print pages.
2) hard to bookmark pages.
3) hard to navigate framed sites with keyboard (accessibility WAI)
4) frames complicate your site.
5) mobile devices don't support frames.
7) web assistive technologies don't like frames.
6) W3C dropped frame support from HTML 5.0
More on why frames are a bad idea
http://apptools.com/rants/framesevil.php
DW Templates Make your life easier
http://forums.adobe.com/message/2328300#2328300
Guidance on when to use DW Templates, Library Items and SSIs -
http://www.adobe.com/devnet/dreamweaver/articles/ssi_lbi_template.html
More on DW Templates and SSIs:
http://www.smartwebby.com/web_site_design/dreamweaver_template.asp
http://www.smartwebby.com/web_site_design/server_side_includes.asp
Good luck,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Why are my rendering times so long?

System Specs:
i7-4820K @ 3.7 GHZ
EVGA GTX 980 'FTW' Edition (1380 MHz)
16 GB Corsair Vengeance RAM
Windows 8.1 Professional
OK, so I've recently made the switch to Adobe Premiere Pro CC based off of recommendations from others. Most if not all of my imported footage is recorded in the NVIDIA NVENC Codec (1920 x 1080; 60 fps; Progressive) while the audio is uncompressed .wav at 48,000 Hz. Even if no editing at all is done on the import before sending it to render, the time can reach up to 21 hours for a 1 hour and 34 minute video. The files I'm rendering are targeted for average bitrate and low file size at 720p for export to YouTube. I understand that my computer is primarily suited for gaming, but I don't think it should take almost a day to render videos. Do you have any suggestions?

I'm using Premiere Pro CC 2014.2 from Creative Cloud. Normally I can only use software mode, since the 980 isn't officially supported. I can patch hardware support in, but Premiere doesn't know how to use the Maxwell architecture. All of my import files are from a separate HDD to my render drive (record on F:\ render on C:\).

Why are images rendering so poorly in InDesign CS6?

My display performance is set to High Quality, but I'm still getting poor image quality when I import the screenshot.
This is actually unbelievable. All of my colleagues are having the same problem (which doesn't exist in earlier versions of InDesign). Is this a known problem?
My workspace is set to "Web". Exporting doesn't fix it. I'm viewing the document at "Actual Size" and still, the problem persists.
Indesign CS6:
Original:

I've tried every export setting - all output is sub-optimal.
This is an unknown problem. I've scoured the web for ages, and can't find anything on it. Plenty of other people have the issue, but no solutions.
Here is another post with the same problem:
http://forums.adobe.com/thread/1076804

Why are frame sizes increasing after editing with Nik plug-ins?

I’m using the Nik Collection of plug-ins with Aperture, and have discovered that the frame size of the resulting edits always end up larger than the original - sometimes much larger.
The original image starts as 4592 x 3448 but after editing, the longest side of the resulting image is typically over 5000, 6000 or even 7000 pixels.
I recently worked on a cropped image that started at 4138 x 2759 and ended up at 7361 x 4908, after editing with a combination of Dfine, Viveza, Color Efex + Silver Efex. If I export a version during the editing process, and then carry out futher editing, the frame size increases again.
I’m exporting from Aperture using the TIFF - Original Size (16 bit) setting.
Can anyone tell me what’s going on here? I’m concerned that the quality of the images is being compromised by the enlargement.
I'm using the latest set of Nik plug-ins, with Aperture 3.2.4 on a MBP running 10.6.8

Keli
In order to open Aperture in 32-bit mode by default you can right-click on the application icon, select "Get Info" and check the box marked "Open In 32-bit Mode" (or you can continue to run it by default in 64-bit mode and just get forced to re-open the app anytime you need to use plug-ins that can only run in 32-bit mode).
hope this helps!
Raf

Why are chargers so bad?

Why are the chargers so bad? I have 4 devices and one barely working charger I asked if I could get a replacement but I can't since I've threw them away, you'd think they would make allowances considering the money these devices cost and the fact I have four devices. I thought apple customer satisfaction was suppose to be the best! I may as well go back to samsung at least I know what I'm getting. Thanks apple!

Hey X303, With no proof, what do you expect Apple to do? It's a little like going into a bank with an empty box, telling them, "this box was full of gold, will you fill it up again." No company is going to replace a missing non-existent device. With that said, one defective cable, I would say Apple fix it. But four cables?!? That clearly points at something your doing. I have three lighting cables, have had them for over a year-- no issues with any of them. The lighting cables are not as robust as earlier types, but take a look at your habits. Here are things to avoid and things try. Things to avoid: Do you ever pull, attempt to stretch or go beyond the length of the cable. Do you you twist the cable, or bend it sharply? when not in use do you wrap the cable tightly or do you wrap it around something when not in use. Last do you remove or attempt to plug in the cable by grabbing the cable and pulling / pushing. OR things to try: Do you keep the cable loose, maintain a little slack at all times, avoid pulling and stretching. Avoid sharply bending and twisting. When storing, keep it loose. And lastly never plug in or unplug the cable by pulling / pushing on the cable, always handle from the cable end. Hope this helps, Good luck. Cheers.

Why are previews in Bridge blurry (not rendering properly)?

Why are previews in Bridge blurry (not rendering properly)?
I found a simple answer to this question: control click on the thumbnail and select "purge cache for selection"
After years of intermittently having this problem, this solved the issue. I had just finished a fresh install of main sys hd (new hd) and first time opening bridge encountered this issue again after not having the problem for a few years.
Hope this helps others.

Why are previews in Bridge blurry (not rendering properly)?
I found a simple answer to this question: control click on the thumbnail and select "purge cache for selection"
After years of intermittently having this problem, this solved the issue. I had just finished a fresh install of main sys hd (new hd) and first time opening bridge encountered this issue again after not having the problem for a few years.
Hope this helps others.

Why are most of my keywords not included when I export images?

Why are most of my keywords not included when I export images?
Since starting with Lightroom 1, I've entered keywords into either of the two fields between "keyword tags" and "keyword suggestions" in the keywording panel. I was unaware that some keywords are more equal than others, or that Lightroom offered (or has added?) hierarchy support.
I recently stumbled into the news (to me) that Lightroom tags can be organized into a hierarchy, so I exported my keywords to a text file to examine. I hadn't unwittingly created any hierarchies, but an astounding fraction of the keywords were within square brackets. Sure enough, if I export an image, keywords within square brackets are omitted from the output (jpeg) file. How nice. Since I began with Lightroom 1, I've added nearly 1600 keywords.. Too bad most of them are coded wrong... so as not to accompany output that I create.
1.     What was I supposed to do, as a photographer beginning to use Lightroom, to enter keywords simply but reliably: what I type is what I get? I'd expected that's what the "just type here" interface would provide.
I especially dislike obtaining erratic results: most keywords are in square brackets, but a few are not. Of course, when I use a simplified interface, I should expect not to have access to some of the options or features. However, I shouldn't inadvertently trigger undocumented behavior.
2.     Does the Adobe reference help system say how to enter keywords simply and reliably, in its documentation of the keywording panel? I don't find my answer under the Keywords topic, within Home / Using Photoshop Lightroom 3 / Organizing photos in the catalog.
(I NOW realize that the instructions for the "Create/Edit keyword tags" dialog mention exporting. However, that's not the method I was using.)
Dick Rawson

I'm afraid that I distracted you with my background mention of hierarcharial keywords; I'm not asking about them.
I've entered keywords for several years of using Lightroom. Suddenly, this week, I find that most (yet not all) of them have the attribute of "don't include the keyword in an exported file's metadata." I never intended to ask for that; I thought all keywords will stay with the file and its offspring, and that's what I wanted.
So I'm asking:
1.     What did I do "wrong" to induce Lightroom to give the keywords that attribute? I never intended to ask it to.
2.     Where does Adobe document how to enter keywords reliably so that they stay with the file on output? I can't find that Adobe does.
> Can you be more clear about keywords in square brackets? I know when you export the keywords as a list you can get a normalized data file that uses punctuation and tabs as delimiters...
I did export the keywords into such a list: most keywords in the plain-text list have square brackets surrounding them, indicating keywords that will be omitted from metadata of any image that Lightroom exports.
My concern is not that the brackets are there. They encode the attribute of "don't include the keyword in an exported file's metadata," and recognizing that attribute concerns me.
> ...but I've never seen keywords in image files or in the interface rendered so.
I haven't, either.
Dick Rawson

In Pages 5, why are page thumbnails different sizes?

So I'm using 5. And I must say I think it's brilliantly done after a long period of ******** about it. I guess I'm not asking of it anything it doesn't provide and what it does it does very well - though I'm puzzled by the behavior of selecting text via the keyboard.
Anyhow, that's not my question. I'm working with a long text document. I notice that as I work the page thumbnails become different sizes. It's subtle but it's clearly intentional. I reckon it's trying to tell me something but I don't know what. Haven't been able to find any info in the manual and was wondering if any of you clever people here might know. Thanks.

This is what I meant about how rude you are though. Your answer DOESN'T EXPLAIN ANY OF THE BEHAVIOUR myself or the other person were reporting. The only assumption that I can make is that you posted here for the sole purpose of implying that we are both mistaken or stupid.
How is this helpful at all?
How do you have 32,485 points when you are obviously more concerned with insulting people than helping them out? It puts the lie to the whole idea of "Apple Support Communities."
Also, I specifically informed you that your comments were insulting and unhelpful and politely requested you not post on this thread anymore or at least until you had some kind of actual information, yet here you are. Posting again, with no content other than the implied insult.
I'm not stupid. I know what a section break is, I know what a page break is. I'm a writer who has used innumerable word processing programs over the years and have been an IT worker for 10 years now.
I have a Pages document. It has no (or only one depending on your point of view), section(s). It has page breaks only. The pagination is set to start at "1" on the first page and proceed normally to the end of the document (300 or so pages). I am using Pages 5.5.2 on a brand new iMac. I have NONE of the previous or older versions/types of Pages on my computer.
The pages thumbnails on the side, do actually CHANGE SIZE randomly as I am editing the document. These differing sizes are NOT CORRELATED WITH THE BEGINNING OR ENDING OF SECTIONS. These size changes are also NOT CORRELATED WITH THE PAGE BREAKS (in case you were about to argue the similarity of page breaks and section breaks). As I work through the document and scroll up and down editing here or there, the size of the thumbnails RANDOMLY CHANGE SIZE. Sometimes this is correlated with me working on a section, sometimes I can work on a section and no change happens at all. The thumbnails that change size often change back again when I scroll back to them later on.
So please ... Try to act like a decent human being and either help out, or go away. STOP POSTING THAT WE ARE WRONG, when you DON'T in fact know we are wrong. STOP INSULTING ME by assuming I am stupid.
Why are you even here if you don't want to actually HELP anyone?
To anyone else reading this: I am having a real bad time with this fellow who is just the most insulting person I have met for a while, however many of my posts about him are being deleted. If anyone knows (including the mods of this forum) of the proper way to REPORT or get rid of a troll/abuser like him on Apple Support Communities or a place to report his behaviour, please let me know.

Why are animated gifs not displaying animations in the preview?

Why are animated gifs not displaying animations in the preview?
My coworkers and I are not seeing a animation in the preview pane in Adobe Bridge CS6 even when clicking the play button in the preview window. However, we do see a graphic of the first frame and one person sees 1 frame when clicking play and one other frame and then the animation stops, however, that is not the complete animation.
I'm using Windows 7 32 bit
My coworkers are using a mac.
One coworker has apple OS Mountain Lion with a Intel Quad-Core Xeon – 64 bit system.
Is this fixable or in the works as a patch? Otherwise we have to open these docs in a browser in order to view them properly.

I've just come to the realization that some animated gifs do play fine and others do not. A coworker of mine suggests that if it's an animation made via Adobe Photoshop, it'll work in bridge but will not if it's made using something else.

Disc Burner. Why are some files not readable or writeable?

Hello,
I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
"The operation cannot be completed because some data cannot be read or written.
(Error code - 36)"
Followed by the choices: "Stop" or "Continue".
I have a bad feeling that my startup disk is too small but I am not sure.
Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
Here are the specifications:
Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
Here is my process (I hope I am doing this right - I am new at this):
1. I first insert a blank DVD-R
2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
Why would some files not be readable or writeable?
4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
"Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
Am I doing this the right way?
Why are some files not "readable or writeable" as it indicates in the error message?
Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
Thanks

To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
Thanks Kappy

I do not have many messages but my iphone 5s says messages take up 4.6GB of space. When comparing with friends who have many more message, less than 1 GB is being used on their phones. Why are mine taking up so much space and how do I correct that?

I do not have that many messages on my new iPhone 5s (maybe about 15 conversations and only one or two going back a little ways) yet when I go to Settings, Usage it shows that my messages are taking up 4.6GB of space. When comparing with others (some who have hundeds of messages) they are using under 1GB for their messages. Why are mine taking up so much space??

I found a post with this solution that worked for me - .Do a backup, then download ibackupbot. It lets you look into the contents of that backup. Look in system files>mediadomain>library>sms>attachments. I found a ton of huge files related to long deleted texts. ibackupbot let me delete all that old crap. I then restored the phone with that now modifec backup and Bingo! freed up 9 GB. No problems.
But note, if you are not technically inclined you probaly don't want to be digging around and deleting back up files. You delete the wrong thing and you could jack up your phone badly. Be careful.

Faces tags are not rendering

I am using JDeveloper 10.1.3.. I have a rather dynamic web page, so I decided to do everything in the servlet. I write out everything for the jsf page from the servlet. Here is what I have:
PrintWriter out = response.getWriter();
out.println("<%@ tablib uri='http://java.sun.com/jsf/html' prefix='h' %>");
out.println("<%@ tablib url='http://java.sun.com/jsf/core' prefix='f' %>");
out.println("<f:view>");
out.println("<html>");
out.println("<head><title>Servlet1</title></head>");
out.println("<body>");
out.println("Prompt1: <h:inputText id='p1' value='hey' />");
out.println("<br>");
out.println("Prompt2: <h:inputText id='p2' value='yohey' />");
out.println("</body></html></f:view>");
out.close();
I run the servlet with in JDeveloper. The page is rendered but none of the jsf tags are rendered. I have no input fields. Why?
When I do a view source from my browser IE 6.0 I get the following:
<%@ tablib uri='http://java.sun.com/jsf/html' prefix='h' %>
<%@ tablib url='http://java.sun.com/jsf/core' prefix='f' %>
<f:view>
<html>
<head><title>Servlet1</title></head>
<body>
Prompt1: <h:inputText id='p1' value='hey' />
<br>
Prompt2: <h:inputText id='p2' value='yohey' />
</body></html></f:view>
[pre]
What am I doing wrong? Why are the jsf tags not being rendered/converted/used?

I am using JDeveloper 10.1.3.. I have a rather dynamic web page, so I decided to do everything in the servlet. I write out everything for the jsf page from the servlet. Here is what I have:
PrintWriter out = response.getWriter();
out.println("<%@ tablib uri='http://java.sun.com/jsf/html' prefix='h' %>");
out.println("<%@ tablib url='http://java.sun.com/jsf/core' prefix='f' %>");
out.println("<f:view>");
out.println("<html>");
out.println("<head><title>Servlet1</title></head>");
out.println("<body>");
out.println("Prompt1: <h:inputText id='p1' value='hey' />");
out.println("<br>");
out.println("Prompt2: <h:inputText id='p2' value='yohey' />");
out.println("</body></html></f:view>");
out.close();
I run the servlet with in JDeveloper. The page is rendered but none of the jsf tags are rendered. I have no input fields. Why? When I do a view source from my browser IE 6.0 I get the following:
<%@ tablib uri='http://java.sun.com/jsf/html' prefix='h' %>
<%@ tablib url='http://java.sun.com/jsf/core' prefix='f' %>
<f:view>
<html>
<head><title>Servlet1</title></head>
<body>
Prompt1: <h:inputText id='p1' value='hey' />
Prompt2: <h:inputText id='p2' value='yohey' />
</body>
</html>
</f:view>
What am I doing wrong? Why are the jsf tags not being rendered/converted/used?

Why are not pop up message window when message type I and W

Hi All,
I am working in BADI ( me_purchdoc_posted~posted) for t-code ME21N. Actually i want show material number, material description and ABC indicator of material at saving point of PO if material is significant.
code is properly working but does not showing error message window when I am using message type I (information) or W (worming message) .
if i am using message type E ( error message )then showing message window just link Information message.
So i can no understand why are not message window pop up when i take message type I and W.
my code is that
method IF_EX_ME_PURCHDOC_POSTED~POSTED
IF SY-TCODE EQ 'ME21N' OR SY-TCODE EQ'ME21'.
DATA : wa LIKE LINE OF IM_EKPO.
DATA : VAR_MAKTX TYPE MAKT-MAKTX.
DATA : VAR_MAABC TYPE MARC-MAABC.
DATA : P TYPE STRING.
DATA : P1 TYPE STRING.
LOOP AT IM_EKPO INTO wa.
    SELECT SINGLE MAABC FROM MARC INTO VAR_MAABC WHERE matnr EQ wa-matnr AND werks EQ wa-werks.
    SELECT SINGLE MAKTX FROM MAKT INTO VAR_MAKTX WHERE matnr EQ wa-matnr. " AND werks EQ wa-werks.
      IF VAR_MAABC EQ 'A'.
        P = 'is significant material'.
        CONCATENATE WA-MATNR '(' VAR_MAKTX ')' P INTO P1.
        MESSAGE P1 TYPE 'E'.
        EXIT.
        ENDIF.
ENDLOOP.
ENDIF.
endmethod.
guide me...............

Hi vinod,
thanks for reply......
yes, my requirement is to show the popup window with material number, material description and ABC indicator of material at saving point of PO if material is significant.
I find Badi to transaction me21n at saving PO. Badi ME_PROCESS_PO_CUST does not exist.
so i am using Badi me_purchdoc_posted~posted.
This Badi ( me_purchdoc_posted~posted ) is properly working But showing message "system error ( error in method po_post ) "
when I am click on OK then automatic leave from transaction.
guide me..........

Why are some of my still images (jpeg) Ok in my timeline, but skewed ofter output?

why are some of my still images (jpeg) Ok in my timeline, but skewed ofter output?

Skewed? Left or right? Could you post a screenshot? What format is your timeline? What is the frame size of the JPEG?

Why are frames rendered so badly

Similar Messages

Maybe you are looking for