Why are multiple slides under one table of contents button?

I'm using Captivate 8, and notice that when I preview my course, the table of contents buttons directly correspond with each slide but then after that, the remaining slides are lumped under one table of contents button. How can I fix this? In other words, when looking at the table of contents, it looks like my course only has 6 slides when in reality there's 30...many of which are lumped under the last button.

You have to scroll, they are not under one button at all.
Good practice is to group slides, then you'll see the hierarchy in the TOC and you are able to collapse all groups. That way the TOC will have a clean look, and the user can open a group to see the individual slides.

Similar Messages

How to get the data from multiple nodes to one table

Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
Indra

HI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM.

Advise on using DBMS_XA with multiple branches under one global transaction

Dear all
I need some advise on using DBMS_XA from PL/SQL with tightly coupled multiple branches under one global transaction. Basically, I've successfully written some PL/SQL code that in 3 different sessions attaches to 3 different branches of one global transaction and before ending each branch they can see each others uncommitted data. So far so good.
However, I'm not sure I completely understand how each branch must call xa_end, xa_prepare and xa_commit correctly using two phase commit and my calls result in errors like:
ORA-24767: transaction branch prepare returns read-only (XA error code 3 = Transaction was read-only and has been committed)
ORA-24756: transaction does not exist (XA error code -4 = XID is not valid)
ORA-02051: another session or branch in same transaction failed or finalized
This is the structure of my programs (3 SQL*Plus sessions):
main: Uses xid 123|0 (branch 0 of global transaction 123). This should be the coordinator that commits using two phase commit across the 3 branches
m1.xa_start tmnoflags
m2.DML
m3.Wait for thread A + B to manually be started and run xa_end
m4.xa_end tmsuccess
m5.xa_prepare
m6.xa_commit false
thread A: Uses xid 123|A (branch A of global transaction 123)
a1.xa_start tmnoflags
a2.DML -- thread A can see main and thread B's data
a3.xa_end tmsuccess
a4.xa_prepare -- required?
a5.Should we also call xa_commit false?
thread B: Uses xid 123|B (branch B of global transaction 123)
b1.xa_start tmnoflags
b2.DML -- thread B can see main and thread A's data
b3.xa_end tmsuccess
b4.xa_prepare -- required?
b5.Should we also call xa_commit false?
The failing steps are:
m5
m6
a4
a5
b4
b5
Before starting calling xa_end I see 3 rows in V$GLOBAL_TRANSACTION, eg (hex 7B = decimal 123):
FORMATID GLOBALID BRANCHID BRANCHES REFCOUNT PREPARECOUNT STATE FLAGS COUPLING
203348753 0000007B 00000000000000000000000000000000 3 3 0 ACTIVE 0 TIGHTLY COUPLED
203348753 0000007B 0000000000000000000000000000000A 3 3 0 ACTIVE 0 TIGHTLY COUPLED
203348753 0000007B 0000000000000000000000000000000B 3 3 0 ACTIVE 0 TIGHTLY COUPLED
Thanks a lot in advance.
Cheers
Finn

OK, I've figured it out. This is poorly documented as it's not well explained how to handle the various return codes. Turns out that all but the last xa_prepare calls return dbms_xa.xa_rdonly (tightly coupled branches are combined -- "read only" optimization), the last one returns dbms_xa.xa_ok and this is when you should call xa_commit.
Now my next problem is that DBMS_XA doesn't work from within jobs (DBMS_JOB and DBMS_SCHEDULER), which makes it very difficult to use DBMS_XA. My purpose of using DBMS_XA is to coordinate work across multiple sessions in one transaction but if I can't easily create the multiple sessions, I'm stuck.
When called from a job, xa_start throws:
ORA-24789: start not allowed in recursive call
on Oracle 11.2. In Oracle 11.1 it works, but xa_end fails with
ORA-25352: no current transaction
so I guess in fact the xa_start call didn't really work either, even though it returned tm_ok.
I'm now trying to find a workaround on how to use DBMS_XA from within jobs, please comment if you have any suggestions. Or if you have any suggestions on other means of establishing the concurrent sessions (I wouldn't like to resort to external programs that need username/password to connect as password management would be a security issue).
Thanks in advance.
Cheers
Finn

Multiple Schemas under one user account with XE 10g

Hi,
I am using (learning) XE 10g. I would like to know if it is possible to have multiple schemas under one user account and have the schemas logically separated. As of right now, I have three schemas that I am working with, each one under a different user account. This is inconvenient, because I have to logout of one user account and login to another user account simply to be able to work with another schema.
Thanks

It isn't possible to have multiple schemas under one database user account. It is of course possible to grant rights to other database users, and or roles, in order to allow access to the tables/data from other accounts. In Oracle there is a one-one mapping between schema and user.
Niall Litchfield
http://www.orawin.info/

Can there by multiple accounts under one id? I just loaded a $25 gift card and it showed up in my balance. My daughter, under the same id had $12.0 left from a previous gift card. Now only the $12.01 shows up and the $25 is nowhere to be found?

Can there be multiple accounts under one apple id? My daughter and wife apparently share an id between my daughter's ipod and my wife's ipad. My daughter has what she believes is her $12.01 left from a gift card. My wife loaded a $25 gift card recently (I saw the $25 balance in her account when she was done) and after a password change, now all that shows up is the $12.01?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Multiple subnets under one vlan

Hi everyone,
Is there any way to create multiple subnets under one VLAN ? Right now, I am using VLAN 110 and it's IP is 172.16.0.1/16.
We have three types of devices on this VLAN.I want to create 3 or 4 subnets for those devices under this VLAN for reducing the traffic or broadcast ?
Please advise me.....
Thanks in advance

Mohammed,
As long as you have a single VLAN only, you will not reduce the amount of broadcasts in this VLAN by using several IP networks. Even if the stations are in different IP networks within a single VLAN, every broadcast will be sent across the entire VLAN to all stations, regardless of their configured IP address. Broadcasting is a matter of Data Link Layer, or Layer2, and if you keep a single Layer2 domain (the VLAN), you will keep a single, merged, large broadcast domain.
Just to answer your question, you could assign multiple addresses to an interface in a single network/VLAN by using secondary IP addresses, for example:
interface Vlan110
ip address 172.16.0.1 255.255.0.0
ip address 192.168.1.1 255.255.255.0 secondary
ip address 10.20.30.1 255.255.255.0 secondary
However, as I explained, this will only allow you to "stretch" multiple IP networks over a single broadcast domain so there is no saving in terms of broadcasts or traffic reduction. For that, you must resort to multiple VLANs.
Best regards,
Peter

Display Data from multiple models in one table

Hi Experts,
Is it possible to display data from multiple models in one table smltnsly.
I have created a table dynamically.Now I would like to display data from multiple models... If this possible,can anyone give me a lead as to how to do it..
Regards
SU

Hi
Your Model Nodes be
Model1
---Output_Model1
Attrib1
Attrib2
Model2
---Output_model2
Attrib1
Attrib2
and the value node is
ValueNode
---Attrib1
---Attrib2
Now the coding.
int size;
IPrivate<ViewName>.IOutput_mode1Node node1 = wdContext.nodeOuptut_Model1();
IPrivate<ViewName>.IValueNodeElement elem;
size = node1.size();
for(int i=0; i<size; i++)
   elem = wdContext.createValueNodeElement();
   elem.setAttrib1( node1.getOutput_Model1ElementAt(i).getAttrib1() );
   elem.setAttrib2( node1.getOutput_Model1ElementAt(i).getAttrib2();
   wdContext.nodeValueNode().addElement( elem );
similar code for Model Node 2
Regards
Abhimanyu L

Why are certain albums like ones from Tool or Ozzy era black sabbath not available in the U.S. store

why are certain albums like ones from Tool or Ozzy era black sabbath not available in the U.S. store

Also, in some cases the artist will not allow download sales, or insists on a download store selling complete albums only rather than offering individual tracks, something Apple resists. In any case, it's not by Apple's choice; it's by decision of the content owners.

How do I apply one same transition to multiple slides in one go?

How do I apply one same transition to multiple slides in one go?

After you have done either of the previous options to get the transition on the current slides, you can add the transition to the Master Slide so all your new slides will default to the same transition.

More than one Table of Contents

Does anyone know if RoboHelp now offers the ability to create
more than one table of contents for a help project?

Leon is right. The "workaround" we have used for years is to
create multiple TOC (projectname.hhc) or Index (.hhk) files and
archive them somewhere for safekeeping. Then use them to overwrite
the existing ones in the project. It works but it's really
inconvenient and you really have to pay attention to an archive
naming scheme because the filenames must be the same as the project
name.
However, I just noticed that I forgot to report in my Adobe
RoboHelp 7 sneak peek wrap up an even more robust implementation.
BTW, here's the URL Peter mentioned
http://tinyurl.com/2ldt7e
Not only will you have multiple TOC/Index and Glossary
definitions - you will also have the ability to add a "placeholder"
from one custom TOC to another. It's a reference that can be placed
anywhere in the hierarchy of the TOC. It works in a similar way
that the Merged TOC icon works now. Way cool and takes the TOC
(Index) to another level. They will also play nice with RoboSource
Control if you are using that.
Thanx,
john

More than one table of content

Hi,
I need to put more than one table of content (contents, illustrations, tables). Is there a way to do this? When I add the second table, the first one disapears.
Thank you!

Techicly you can have multiple TOC, but
they won't cover over the same pages.
Each one will cover from where they are up to the next one.
There is a walk around.
Since table of content table of illustation usaully are numbered independly
from the reste of the text, you will have to put extra care only with the table of content.
Make the right amount of page nessairy for all your table, and place theire name.
(You may have to input manully the part about «pre-text» of your table of content depending
of your numbering)
Put the right name in the right style.
Make your table of content then print it.
Input your table of illustration at the desire page (make sure page number still match),
change TOC setting to have what you want.
Print those page.
Do this for all your TOC.
If you only have 2 or 3 entry don't bother with that.
But if you got a lot like over 40 illustrations (like in the one I'm doing right now)
that can be a good option.

Why does IBA not include the table of contents when exporting to PDF?

Why does IBA not include the table of contents when exporting in PDF? I can seee the TOC in iBooks Author but when I want to see what it looks like in a regular PDF, the TOC does not show up.

Strange question you ask here. Not sure why that is relevant to "why" IBA won't publish a table of contents in a PDF.
But since eyou asked, it's simple, I want to author some books in IBA and also see what they look like - completed - in PDF. Again, any suggestions as to a work around so I don't have to cut and paste back into Pages?

Problems copying and pasting multiple slides from one captivate to another.

I have been able to copy and paste several slides into
another captivate and suddenly this has stopped working. I am using
the ctrl key to select multiple slides (a set of 3) and the using
the Edit drop-down to select copy slide. Then, I click on the other
captivate and click paste slides. It is only bringing 1 slide, the
first one, and not the 2nd and 3rd... any ideas. I've had another
set of eyes look over my shoulder... and we're both scratching our
heads.
Also, for some reason the text entry boxes are being copied,
but the failure caption associated with it does not come along. It
also copied the button but lost the association with the text entry
box. WTH?

This might work, this might not. I have copy paste problems
on a regular basis and all that works for me is closing Captivate
down and then re open and continue. At worst, a reboot tends to
solve this glitch in my experience.
Good Luck

Using DATA_CELL and multiple queries into one table

Hi WAD experts,
I have been trying to work out how to combine multiple hidden query result sets in their own tables in the template, into one table displayed as if the data originated from one query.
I have been looking at using the DATA_CELL method of "modify table" class.
Has anyone had to do this before - and if so do you have any clues as to how best to do this ?
Thanks
Chris

Here is what I want:
Say I have a query that tells me about how many items were sold at a hardware store for each week. Then the output would look something like this:
Week,Item,Num_Sold
13,Hammer,15
13,Nail,594
13,Screw,398
14,Hammer,16
14,Nail,382
14,Screw,331
But I want my output to look like this:
<space>,13,14 <-- these would be the week numbers
Hammer,15,16
Nail,594,382
Screw,398,331
I asked this same question in a SQL-only forum and one person responded that they did not know how to do that. But I figure that this is done often enough that there must be some Open Source program that can transform the output data into a table. As you can see, it's not a pure transform. It's more like I take one column, make that the x-axis, another column, make that the y-axis, and "plot" the data based on the two columns. It's kinda like taking 1D data and making it 2D. There's no existing open source program which does this? I figure that I could just give the program my SQL queries, specify some rule such as "Make the first column of the resultset the row, make the second column the column and create a table with the 3rd row, using the first two rows to map the 3rd row into the table". Note that I think this only works with 3 columns.
Anyway, if there is no simple program that already does this, I can make a program to do what I just described. I just asked the question here because I figure that there are a lot of people knowledgeable about SQL and Java on this forum and that someone would know of a tool which already does what I want if one exists.

Multiple currencies under one company code for contracts

Gooday!
We have a new schenario ( In RE-FX) where we have a couple of contracts which were negotiated with the landlord that needs to be settled in Rand, whilst the company code are setup for another currency, which is dollar (caters for the bulk of the contracts). So each time you create a new contract the currency is already greyed out (Dollar), which obviously means that it cannot be changed there.
Apparently the company code can be setup in FI to accommodate secondary currencies, however, this seems not to be the case in RE-FX.
My question is this, is it possible to have multiple currency contracts under one company code in RE-FX, and if so, do one set it up in FI or RE-FX?
Any assistance would be greatly appreciated!

Conditions in Foreign Currency (New)
As of SAP ECC 6.0, Enterprise Extension Financials, Enhancement Package 2 (EA-FIN 602), Business Function Real Estate (RE_GEN_CI_1), you can enter conditions for contracts, rental objects, or contract offers that are in a currency that differs from the local currency of the company code.
You can enter the currency directly when processing conditions. You can also enter a currency translation rule in the posting term. The rule is then used for all conditions to which this posting term is assigned.
You specify in Customizing which currency translation rules are allowed for each contract type and usage type.
See SAP Note 123819.

Why are multiple slides under one table of contents button?

Similar Messages

Maybe you are looking for