Why are my PalPal buttons not working properly after working fine for weeks?

I have not touched the site till I heard there was a problem today. The dropdowns are not showing up.
https://www.appne.net/events.html
Sometimes if I hit refresh or republish the site, they show up again. then after testing to see if they work, they disappear again.
I just upgraded to the April 2 release to see if it helps and it did not.
I talked to paypal and tested the buttons on their testing website and they worked fine.
I did not use the widget in Muse to create...I cut and paste the code from paypal.com button creator.
Anyone else having the same issue?
Please help if so. Thank you!
Marie

Hi Marie
I checked the drop downs and paypal button, it works fine on my end.
http://take.ms/dhdkR
Please try to clear browser cookie and then check , or try with a new browser.
Thanks,
Sanjit

Similar Messages

My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?

My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?

linda mariefromharper woods wrote:
My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?
It may be in the process of making room. What version of OSX are you on? (That process can be excruciatingly slow on Leopard or Snow Leopard backups over a network; Lion has improved it greatly.)
A clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. That should help you figure out what's going on. If in doubt, copy and post them here (but if the same ones repeat over and over, drop most of the duplicates).
If you can, connect via Ethernet; it will be 2-3 times faster.

Macbook Pro 13'' Early 2011 Power Button not responding properly after spilled drink.

Hi Everyone
I've spilled beer on my old macbook last december. I've reassembled pretty much the whole mac, cleaned the motherboard with Servisol (isopropyl alcohol) and applied new thermal compound. The mac is working (if turned on from the motherboard, however the power button doesn't work properly. If pressed several times, sometimes it either changes the brightness of the screen or takes you to the widgets.
The keyboard was disassembled and cleaned and everything else apart from left shift and power button appears to be working on the keyboard. The keyboard was disassembled soon after the spillage, which was few months ago.
As it was few months ago when I cleaned the keyboard, I''ve forgot whether the power button is a part of the keyboard or an individual module. Could anyone give me some advice on that? Any other suggestions regards to the power button?
Another problem I've encountered recently is lost administrator account (after an attempt to turn the mac on). I can only access the guest account, my main account doesn't even appear on the launch. I can still see the administrator's files, but can't access them as they're locked. Is there a way to get back the account or access the files from the computer?
Many Thanks. Damian

Hi M,
There are other threads here with similar issues. I do not know if a "common" fix has been found. Try an SMC Reset:
http://support.apple.com/kb/HT3964
If no luck there, your Mac has a one year hardware warranty and I would contact AppleCare.

Why are my radio buttons not renaming in pages spawned from a hidden template?

Hi Everyone,
I am new to PDF forms, and have never before tried to use JavaScripts. However, I have been able to learn a lot and I have followed many threads and have almost accomplished what I want, but have hit a block. I don't understand the JavaScript well enough to locate my problem. Your help is greatly appreciated.
SYSTEM SPECS: Adobe Acrobat X Pro Mac OS 10.8.5
WHAT I WANT: To create a multi-page (100 pages) form for grading student assignments. Each page must have the same fields, but as each page belongs to a new student, it needs to have different values in the fields on different pages. Each page has 4 questions to score, with 4 score possibilities for each question (0, 1, 2, 3 points), and so only one score should be able to be selected per question.
WHAT I HAVE DONE, following the directions on this thread (Re: Multiple pages form) ):
1) Created a form with a field for student name and 4 sets of radio buttons (Labeled Questions 1-4, with score choices 0-3).
2) Placed a button at the bottom of the page that will spawn a new page and rename fields.
3) Defined this page as a template.
4) Spawned a page.
5) Made the template "hidden."
THE PROBLEM: Steps 1-4 above work perfectly--as long as the template (named "Form") is visible, when I click the button, a new page generates and the student name field renames the fields on Page 2 to "P2.Form.Student ID #" and the radio buttons rename to "P2.Form.Question 1" etc. Each time I press the button, it renames everything appropriately.
However, if I hide the template, then when I click the button on page 1, the fields on Page 2 are renamed to "P1.Form.StudentID ##1." AND THE RADIO BUTTONS DO NOT RENAME. They get the name "P1.Form.Question 1" etc. So the student name field did rename in a way that allows me to enter a new name on each page, but it isn't actually reflecting that I am on page 2, and as for the radio buttons, at that point, I cannot enter different scores on different pages because they are all part of the same radio button grouping.
If I use check boxes, they rename similarly to the student ID field, but I don't want to use check boxes because I want to return one possible score value for each question for tabulating the data. I don't want to leave the template visible because when I distribute this form to other graders, they may enter values into the template page without realizing it, and then when the spawn forms they will have wrong data already entered.
Here is the script that I have set as the button's Mouse Up script:
// Specify the name of the template
var template_name = "Form";
// Get a reference to the template
var t = getTemplate(template_name);
// Add a new page based on the template
if (t !== null) {
    t.spawn({
    nPage: numPages,      // Add the new page to end of document
    bOverlay: false,      // Create a new page, not an overlay
    bRename: true         // Rename the fields
} else {
   app.alert("The template named \'" + template_name + " does not exist in this document.", 1);
Thanks for your help

Hi again GKaiseril,
If you have the time, would you be able to tell me how to do that? I tried just changing the page number of the template page to zero, but I get the error "Please enter a starting value of at least 1." I definitely noticed that all of the discussions about similar subject do all say to somehow put the first page of the form before the template and then hide the template, but I don't think that I know how to do that. I read your response on this discussion "Re: Self replicating form pages in Acrobat Pro 9 (Win XP)" before I ever started this discussion, but have to admit that I can't figure out how to follow your advice "When I create a from that uses a template, I create the template and then spawn the 1st page of the form before the template and then work out the scripting for the 1st page and template and then hide the template."
Thanks

Why are podcast episode titles not displaying properly.

I publish the "Twilight Guitar" podcast on iTunes, Sticher and other platforms.
My feed is at http://feeds.feedburner.com/twilightguitarpodcasts
I use Wordpress and feedburner to publish without problems elsewhere. But when subscribing to my podcast using the new "Podcasts" app I noticed that all of the titles of the various episodes are displaying improperly. The titles are fine in the catalog, but after subscribing, the app appears to be pulling the titles from random img tags within the feed.
In other words, my podcast episodes are actually image filenames.
Anyone seeing this elsewhere? Any ideas about how to address/fix it or at least troubleshoot it?
Thanks in advance.

Just to note, and i didn't notice thread before but i have the same issue and just raised a thread too
https://discussions.apple.com/thread/4531716?tstart=0
I am starting to notice more & more people getting this issue now
Alan

ITunes Radio not working properly after signing up for iTunes Match

I've been a user of iTunes Radio for some time now, and I've enjoyed it with minimal technical issues - until I signed up for iTunes Match. I'm not sure if it's simply coincidence, or if my subscription is causing issues.
The problem is that when I click on a station, whether it be a Featured Station or one of My Stations, it acts like it will play, but the time bar never comes up below the song title. Instead of showing the status bar when a song is playing, indicating the time lapsed/remaining, it shows a solid blue bar all the way across with no time.
I use Radio on my MacBook Pro (2009) and I also AirPlay my music to two Bose SoundTouch 20 speaker systems. I'm on the latest version of iTunes, my Bose systems are updated with the latest software, and I've never had an issue with this before. I can play songs I own or ones that I want to preview in the iTunes Store just fine through all of my speaker systems. What's interesting is that my NPR station in Radio works fine, though that one doesn't allow for AirPlay.
I'm also having identical issues from my iPhone 5s. Though I can only play to one AirPlay device at a time from my iPhone, the symptoms are otherwise the same. Downloaded songs play fine; iTunes Radio freaks out and gives the "Station Temporarily Unavailable" message. Except it's not temporary, unless you consider two months of this irritation temporary...
Here's what I've tried so far:
Logging out of iTunes, restarting and logging back in.
Resetting my Bose AirPlay speakers.
Turning off the Bose SoundTouch App and Music Server App on my computer.
Disconnecting my Bose AirPlay speakers from power altogether.
Restarting computer and resetting iTunes Cache and Warnings.
None of those attempts at fixing this issue has resolved anything. I'm at a bit of a loss for help here, and I really don't want to start uninstalling and reinstalling programs if it can be avoided. If there's a way to unsubscribe from iTunes Match, I'd want to try that first as that seemed to be when things started becoming non-responsive. If Apple provides a way to fix iTunes or the iTunes Match service without charging me a $29 support fee, I think that would be great, but I haven't seen one.
Anyone encounter this before? Anyone at Apple listening? I'd greatly appreciate any help.

Try it in Cellular as a quick test. Mi had lots of troubles and isolated the issue to Cox communications. May be an ISP issue.

Why are old PIR's not deleted even after doing MD74 & MD75??

Hi All,
In few materials; i am not able to delete old PIR's??
Even though i have performed MD74 & MD75 (which covers 2 days) i.e. whenever i do this; PIR's which are old than this limit are deleted, but there are few materials of 6-8 months still showing in MD04. Because of which there are major issues in MRP calculations..
I think in this case PIR's are seemed to be partly consumed...but i am not able to relate this.......please clarify and how can this problem be solved permanantly
Rgds

Hi Vicky Khabrani,
You can check with t code MD73 to see how the PIRs are related with sales orders. In the case of strategies like 40, 50 & 60 when SO is entered the SO consume the PIRs.
Subsequently if any of these SO are canceled or If the SO qty reduced, still the PIR will have the link with the SOs.
With the re-organisation function we can delete only those PIRs which are not linked with any SOs....
Regards,
Ramasamy

Why does the sync button not work in itunes when my ipod touch is connected

why does the sync button not work in itunes when my ipod touch is connected?

It's working for me in Acrobat XI:
I'd try logging into Acrobat.com from your browser, and log in with your Adobe ID. There may be a problem there:
workspaces.acrobat.com

Why are my mins usage not on line its been about a mouth now

why are my mins used not on line,it has been about a month now. it shows message that i don't even have

Here are a few things that you check and can try.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

Aluminum Wireless Keyboard not working properly after Firmware update 1.1

Hi,
Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
Thanks in advance.
Franco.

I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
Steve

ITunes / iPhone not working properly after newest update...

iTunes is not working properly after the newest update... It dosen't see my iPhone, the program acts very sluggish, and has trouble loading the Store. Anyone have a solution or an explanation? I have tried the suggestions found in other threads ie. restart, re-download, charge phone, restart phone and so on. Nothing works. Everything was working fine until iTunes and the new ios were installed. After that it all went to crap. Thanks, Randy...

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Why does my edit button not show in Address Book?

I have installed Lion on my laptop; however, I am not able to edit any Address Book entries. After doing some research, I have learned that I am missing the "Edit Button" that is supposed to appear on a contact that will enable editing. My Edit button does not appear - I have only "Add Contact" and "Share" buttons. Why does my edit button not appear?
I have not noticed any other issues with Lion.
Thanks!

Try this:
Select "Go" from the finder whilst holding down the Alt key and "Library will drop down in the list.
Library/preferences/ and delete this : com.apple.AddressBook.plist
re-start your comp and it should work.
This . plist will re-create itself when re resart all nice and clean and fresh.
Should work, it does for most things.
Good Luck

Why are my video edits not being saved on Photoshop CS6?

Why are my video edits not being saved on Photoshop CS6?
I made a TON of edits in a video group, then duplicated that group into another file... and all my edits are gone.
I spent hours working on this, so please let me know what the hell happened and how I can make sure it never happens again...
also--why would CS6 come with such a devastating feature?!?! Who came up with this???

Welcome to the forum.
I did not see any reference to Save, Save_As, or Save_As_a_Copy. Did you use one of those?
Good luck,
Hunt

My Iphoto does not work properly, after downloading Mavericks. How can I fix it ? loading Mavericks

My Iphoto does not work properly after downloading Maverick. How can I fix it ?

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you mean by not working properly? Explain in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

Why do the youtube clips not expand properly when I double click on the page

why do the youtube clips not expand properly when I double click on the page

The exclamation mark is telling you that iPhoto has broken the file path/link to the original file. Assuming you're using iPhoto 9 or later Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Why are my PalPal buttons not working properly after working fine for weeks?

Similar Messages

Maybe you are looking for