Why are there faint static noises coming out of the speaker of my iPod touch

There are faint static noises coming out of the speaker of my iPod touch fifth generation

I Just got home and noticed it. It's coming out of the iPods speaker, Not headphones.
For a few moments it was making popping noises. I shut it down and the static is still going. No sounds are playing.

Similar Messages

IMAC freezing, hang during startup, loud noise coming out from the speaker

I am using the iMAC i3 Intel based which i bought it just a month ago
Last week it hang, freeze just like that without me launch any application just yet
I hold the ON button for a restart, and it freeze during the startup
One more thing, sometimes when it freeze, there's a noise coming out from the speaker ( just like there is no signal from the TV )
Already sent it to the Apple Service Center but they tell me it is free from any error, but by the time i bring it back home, not even 12 hours, it freeze again just like that with loud noises coming out from the speaker.
Btw did i mention, sometimes there's also a screen distortion
Please somebody help me

I've experienced similar symptoms to the original poster's description. I have an iMac 27" 2010 model. This may be related to the following:
I've looked on numerous forums regarding the freezing problem I was having. This problem would arise on a wide range of systems.
Symptoms included but were not all always present - usually when I am loading the system with games/heavy load processes:
- Full system freeze, screen still on.
- Loud cracking noise coming from speakers (relative to what volume was at when the freeze happened).
- Computer asleep but I cannot wake up unless hard reset with power button.
- My screen backlight was also damaged (permanently dimmed) near the left side, and progressively got worse over time. This was fixed (replaced LCD 27" display $600+ and covered by my creditcard extended warranty)
Basically, what I've come to realize which has not been well documented as far as I could find relating to this problem - is that the system is overheating and causing these freezing errors (and LCD damage in my case). Prologned occurances could result in different system part failures.
How do you fix the overheating problem? Give this a try, it's worked so far for me and I've actually been able to continue video/photo editing without having this annoying freeze.
Search for and download 'iStat Pro' (widget addon that lets you monitor your system temperatures... compare it before and after the fix)
Search for and download 'SMCFanControl (a great little app that allows you to change your system fan speeds) - I did not know this was possible, and have never heard the fans go this high when it was being run automatically by the system. The fan's are obviously louder when set to max, but is well worth the system cooling results.

I just purchased a 6 and there is a static sound coming out of the speaker when it is idle. I have the sound on low and turned off and it still makes the static sound.

I just purchased a 128 Gig iPhone 6+. When I have the sound off and volume as low as possible, I get a static sound coming out of the speakers. It is distracting and annoying when I am in meetings, etc. Does anyone know what to do? Thanks in advance.

Couple of things you can try but it looks like you may have to take it in
1. Settings --> Cellular --> Change "Enable LTE" to just "Data" if available
2. Toggle your ringer off and on
3. Settings --> General --> Accessibility --> Toggle Noise reduction off and on
If none of the above works - consider taking it to Apple
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support

Some kind of buzz/noise coming out of the desktop speakers when I connect my iPhone 6 plus to my desktop speakers. Help?

I have the iPhone 6 plus with the current update 8.02. As soon as I connect my phone to my desktop speaker jack, I can hear an intermittent, low-level buzz/noise coming out of the speakers. I've never experienced this noise with my iPhone 4S or my laptop connected.
Is this maybe a grounding issue with the phone? Could mine be defective?
I just tried a friend's 6 plus and his doesn't make the same noise.
Thanks for your feedback.

I have the iphone 6 plus and when I play a ringtone or a video or music and stop it, the speaker of my phone make a little sound like shhhhhh haha, why? and still there for a few seconds and sometimes minutes

Sosound coming out of the speaker for calling people on 5s

So sound is coming out of the speaker for calling people on 5s

Hi zachfromlondon,
Thank you for visiting Apple Support Communities.
I'm reading that as "No sound is coming out of the speaker…"
If so, please follow the steps in this article for help.
iOS: Can't hear through the receiver or speakers
If that is not the issue, try the appropriate section here.
iPhone: Hardware troubleshooting
Best Regards,
Nubz

Ideapad S400u - Noise coming out from the headphone jack

I also have this annoying noise coming out from my headphone.
It happens while the notebook is charging/plugged.
Could anyone help me?
My lenovo is Ideapad S400u - Windowns 8.1 - 64 bits.
Thank you,

Igor,
Welcome to the forum!
Can you describe this noise? Is it coming from the area around the headphone port? If you plug headphones into the port, does the noise go away or change? Is the outlet you are using for charging grounded?
Thanks
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Why are USB audio accessories being locked out of the iPod Touch 4G?

It's very strange. First the camera kit was never allowed to work on neither the iPhone or iPod touch. I can understand that; the iPad has more reserve power. But since the analog inputs were deprecated on the iPhone 4G and iPod Touch 4G, there has been talk but no action on replacements allowing stereo audio input to these devices via USB.
Now I've started to notice a pattern: USB audio accessories like Apogee's Jam and Fostex's Ar-4i originally were advertised as working on both devices, but as they are released, they become only available to the iPhone. Since these are self-powered devices, there doesn't appear to be any reason for this distinction. Does anyone know why this is so? Thanks.

It's a mystery....

Why are there no 1920 X 1080 Choices in the Sequence settings

I watched some videos trying to understand what is the best speed and frame size to use when creating a video. Basically Lynda.com they are saying 1920 X 1080 is full resolution and this is the desirable setting for outputting best resolution. The aspect ratio for this is 56%.
Also they explained the best speeds for the type of output you plan to make. So from this I naturally expected to find a High definition 1920 X 1080 setting as a choice in setting up a new Sequence in Premier Pro. Wrong! To my surprise there is only one choice that will give you these setting right out of the box, What's up with the settings choices. The recommended setting should be right there and easy to find. Below I show the choice of AVCHD is the only obvious choice for creating a 1920 X 1080 video. Can you guys help?

Just to toss in my two cents worth - I don't believe any DSLR shoots 1080i, should all be progressive as 1080p or 720p. And back to the "HDV" or "Anamorphic HD" thing - with square pixels (1.0 Pixel Aspect Ratio) 1080i/p is 1920x1080 and if you divide each side of that by 120, you get 16 and 9. A 16:9 ratio between width and height (not 56% or 1.7777777 !!!!). "Anamorphic" widescreen is a way of "faking it", and saving a smaller file since less data is involved. That is how HDV works. It uses 1440x1080 pixels, and they are not square, rather they are rectangular with a 1.333 pixel aspect ratio. The pixels are wider than they are tall, and that makes up the difference so that it still plays back looking like 16:9 (IF the player respects the PAR). Simple math shows that 1440 x 1.333 = 1920! So 1440x1080 with 1.333 PAR "looks" the same as 1920x1080 with 1.0 PAR, even though 1440x1080 comes out to 4:3. Which brings up the last point, if anyone IS editing HDV footage, and wants to export to say YouTube or other other computer/tablet playback formats, do NOT export as 1440x1080 because most players will not pay attention to the PAR and the video will look like 4:3 (players wrongly assume 1.0 PAR). You will want to export as 1920x1080 with 1.0 PAR and then all is right with the world. Or take it down to 720p at 1280x720, also 16:9 with 1.0 PAR for correct playback.
Thanks for reading and good night ;-)
Jeff

Is there a way you can transfer all the music from an ipod touch without losing any of it?

I have the latest of the Ipod Touch. My computer had crash but I didn't backup any of the music to a disc but its backup on the ipod touch. I want to connect my touch to my new computer but I don't want to lose any music. Is there a way I can transfer all the music without losing it?

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Why are my converted files no coming out right?

I use Office 2007 WORD.

It sounds like you are referring to the subscription service (which is accessed through Adobe Reader but not actually Reader if that makes sense).
You'll want to ask in that forum. Document Cloud PDF services

Noise coming out from the top of iMac

Noise keeps coming from the top of the machine.

It may be cleared as far as you can see but I'm wondering if you have a dust problem. You could try disconnecting the computer then vacuum along the vent. Reading your mail encouraged me to check out my vent and I picked up a great lump of fluff. But as I have no funny noises, I'm not going to follow my suggestion.

Why are there CORBA error messages -- COMM_FAILURE when using the orb obj?

Hi Guys,
I followed the tutorial http://download.oracle.com/javase/6/docs/technotes/guides/idl/GShome.html
compiled and run the code. Everything works fine however whenever I use the ORB orb object I get the following message
both in my Naming Service and the HelloServer output:
2010-12-10 12:35:46.505 FINE Transport to 127.0.1.1:44100: stream closed on read < 0
2010-12-10 12:35:46.506 FINE ServerGIOPConnection to 127.0.1.1:44100 (ec4a87): getMessage() -- COMM_FAILURE
2010-12-10 12:35:46.507 FINE ServerGIOPConnection to 127.0.1.1:44100 (ec4a87): streamClosed()
2010-12-10 12:35:46.508 FINE ServerGIOPConnection to 127.0.1.1:44100 (ec4a87): close()
Why is this happening?
I have also installed jacorb and added it to my class path and run the examples with:
jaco -Djacorb.config.dir=. -DORBid=HelloClient HelloServer
ns -Djacorb.naming.ior_filename=/home/zorg/Project/Java/CORBA/NameService/NS_Ref
jaco -Djacorb.config.dir=. -DORBid=HelloClient HelloClient
I have included the code from the tutorial for convinience:
// HelloServer.java
// Copyright and License
import HelloApp.*;
import org.omg.CosNaming.*;
import org.omg.CosNaming.NamingContextPackage.*;
import org.omg.CORBA.*;
import org.omg.PortableServer.*;
import org.omg.PortableServer.POA;
import java.util.Properties;
class HelloImpl extends HelloPOA {
private ORB orb;
public void setORB(ORB orb_val) {
    orb = orb_val;
// implement sayHello() method
public String sayHello() {
    return "\nHello world !!\n";
// implement shutdown() method
public void shutdown() {
    orb.shutdown(false);
public class HelloServer {
public static void main(String args[]) {
    try{
      // create and initialize the ORB
      ORB orb = ORB.init(args, null);
      // get reference to rootpoa & activate the POAManager
      POA rootpoa = POAHelper.narrow(orb.resolve_initial_references("RootPOA"));
      rootpoa.the_POAManager().activate();
      // create servant and register it with the ORB
      HelloImpl helloImpl = new HelloImpl();
      helloImpl.setORB(orb);
      // get object reference from the servant
      org.omg.CORBA.Object ref = rootpoa.servant_to_reference(helloImpl);
      Hello href = HelloHelper.narrow(ref);
      // get the root naming context
      org.omg.CORBA.Object objRef =
          orb.resolve_initial_references("NameService");
      // Use NamingContextExt which is part of the Interoperable
      // Naming Service (INS) specification.
      NamingContextExt ncRef = NamingContextExtHelper.narrow(objRef);
      // bind the Object Reference in Naming
      String name = "Hello";
      NameComponent path[] = ncRef.to_name( name );
      ncRef.rebind(path, href);
      System.out.println("HelloServer ready and waiting ...");
      // wait for invocations from clients
      orb.run();
      catch (Exception e) {
        System.err.println("ERROR: " + e);
        e.printStackTrace(System.out);
      System.out.println("HelloServer Exiting ...");
// Copyright and License
import HelloApp.*;
import org.omg.CosNaming.*;
import org.omg.CosNaming.NamingContextPackage.*;
import org.omg.CORBA.*;
public class HelloClient
static Hello helloImpl;
public static void main(String args[])
      try{
        // create and initialize the ORB
        ORB orb = ORB.init(args, null);
        // get the root naming context
        org.omg.CORBA.Object objRef =
            orb.resolve_initial_references("NameService");
        // Use NamingContextExt instead of NamingContext. This is
        // part of the Interoperable naming Service.
        NamingContextExt ncRef = NamingContextExtHelper.narrow(objRef);
        // resolve the Object Reference in Naming
        String name = "Hello";
        helloImpl = HelloHelper.narrow(ncRef.resolve_str(name));
        System.out.println("Obtained a handle on server object: " + helloImpl);
        System.out.println(helloImpl.sayHello());
        helloImpl.shutdown();
        } catch (Exception e) {
          System.out.println("ERROR : " + e) ;
          e.printStackTrace(System.out);
}Edited by: 819887 on 10-Dec-2010 04:51
Edited by: 819887 on 10-Dec-2010 04:58

Figure out the actual problem is when the naming service is resolving the name on line:
helloImpl = HelloHelper.narrow(ncRef.resolve_str(name));

Why are there 2 thin red vertical lines on the screen of my MBP 15" retina which is only 2 months old!

I would just like to understand why there a two thin red vertical lines on the screen
I suspect I need to bring into an apple store for diagnostics but is anyone aware of the likely cause?
thanks v much!

It could be a GPU issue, a display issue or a display connection issue. The genius bar technician will offer you a definitive answer and should fix it under the warranty provisions.
Ciao.

Why are there so many other programs downloaded with the Adobe programs?

I have an older computer with only 10 GB harddrive. I keep getting programs that I don't want and can't use. When it asks if I want this or that program, I always check no. But many times there is no asking, it just downloads these programs that are taking up what little free space I have which is only 5%.

Business 101: Sell advertising via "sponsored downloads" = make more money.
There are direct downloads that don't have the unwanted "bundled" software.
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

Why are there 26 firefox.exe processes running when the taskbar shows none?

Win 7 professional, Firefox 25.0.1. If I shut down Firefox and restart it I often get an error that a copy is already running. Checking the Task Manager shows many firefox.exe processes (26 this morning) even though the application tab shows none.

Hello Axis,
Can you please confirm if this happens each time you are using Firefox? Also, the cache size wouldn't have a big bearing on this issue happening. Can you please try if this issue happens when you are running Firefox in safe-mode (instructions below). if it doesn't then we can narrow the issue to a plugin / addon.
<hr>
Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
<hr>
Thank you.

Why are there faint static noises coming out of the speaker of my iPod touch

Similar Messages

Maybe you are looking for