Why can't I download Canon S100 CR2 RAW files into PSE 10?

I am using PSE 10 with a Canon S100 camera. I am successful in downloading all of my jpeg files and RAW CR2 files from my older Canon Rebel, but not with the Canon S100 CR2 Raw files.
When first downloading from the Canon S100 camera into PSE 10 and later doing them manually, I receive the following messages:  Nothing imported...files are not supported file types or alread in catalog.  File damaged or in a format that cannot be included in the Elements Organizer.
These problems files, by the way, were automatically added to my Window's My Pictures catalog and are perfectly fine.

Thank you for the info. It worked great, once I was
able to get around a second problem that prevented updating
from within the PSE 10 application (error U41M1C212). That
problem was solved by disabling the MS Virtual WiFi Miniport
Adapter (located in the Network and Sharing Center control
panel). It just goes to show me once again, how complex
computer apps are and how much we all have to rely on each
other to get anything to work properly (frustratingly
enough, since the companies we paid good money to for
their problematic software are not very helpful). Thanks
again.
            Re: Why can't I download Canon S100 CR2 RAW files into
PSE 10?
            created by 99jon in Photoshop Elements - View the full discussion
Try opening a CR2 directly from a folder by right-clicking
and choosing open with Photoshop Elements editor, if that
dosent work, update the appliactaion (required for the
S100V)
In the Editor menu click Help >> Updates
Then install amera raw 6.7
            Replies to this
message go to everyone subscribed to this thread, not directly
to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
http://forums.adobe.com/message/4602882#4602882
            To unsubscribe from
this thread, please visit the message page at
http://forums.adobe.com/message/4602882#4602882. In the
Actions box on the right, click the Stop Email
Notifications link.
            Start a new discussion
in Photoshop Elements by email or at Adobe Forums
            For more information
about maintaining your forum email notifications please go to
http://forums.adobe.com/message/2936746#2936746.

Similar Messages

  • Unable to open Canon 7D CR2 raw files in Photoshop CS6

    Hi Folks,
    I have been trying to open Canon 7D CR2 raw files in Photoshop CS6 (Extended) (Windows 8.1) but I'm always getting the error "Could not complete your request because the file format module cannot parse your file".
    I installed the Camera Raw plugin ver 8.8.0.397 today. Did this initially by downloading and running the CameraRaw_8_8.zip available here Camera Raw plug-in installer. Still got the error.
    Went and did the Check Updates in Photoshop and updated the Camera Raw (and other components) but STILL cannot open the CR2 files.
    I can see the thumbnails in Bridge but when I double click to open them in Photoshop, same error.
    Cannot seem to get past the "Could not complete your request..." error.
    Any ideas?
    Cheers,
    Doug...

    Hi Folks,
    Thanks for your replies and assistance so far, very much appreciated. Its a very frustrating problem... this should be one of those things that just work.
    I have uploaded two sample pics taken with my canon 7d. If you get a chance, could you please try opening these images to see if they work on your machine.
    http://www.bespoke-gems.com/images/gemstones/misc/rawtest1_canon7d.cr2
    http://www.bespoke-gems.com/images/gemstones/misc/rawtest2_canon7d.cr2
    I have tried opening them on both my office and home computer but neither of them work.
    Hmmm... could it have anything to do with the lens (Canon Macro Lens EF  100mm1:2.8 USM)
    Many thanks!

  • Does Fireworks 8 support Canon's .CR2 raw files

    Does anyone know if Fireworks 8 supports Canon's .CR2 raw
    files? I tried to open some .CR2 files in Fireworks 8 and it did
    not recognize them...can I update or something so it will recognize
    them or do I have to revert back to shooting in jpg?

    > Does anyone know if Fireworks 8 supports Canon's .CR2
    raw files?
    >
    see if this free converter will turn it into a format
    fireworks will open?
    http://www.macworld.com/news/2007/12/06/raw/index.php
    a photoshop plugin-
    http://www.adobe.com/products/photoshop/cameraraw.html
    and a standalone converter
    http://www.adobe.com/products/dng/
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Corrupt/Non Viewable Canon Xs .CR2 Raw files

    Hi All,
    I am having issues with my importing/viewing my Canon Xs .CR2 Raw files. I import them into Aperture and they do not show up correctly. I get either a black or a green and magenta static with lines for an image. I am currently running both the latest Aperture Version (3.1.1) and Digital Camera RAW (3.5.0). I have been searching for three days and cannot find a solution to this problem. I have found a few other people having issues as well. Here are some snippets/links from/to these posts:
    http://discussions.apple.com/thread.jspa?threadID=2667652&start=0&tstart=0
    “The latest Aperture 3.1.1 update breaks Canon's "Medium RAW" compatibility; Aperture used to be able to read the "Medium RAW" CR2 files before this update, but not anymore. Also, updating to the latest "Digital Camera RAW 3.5.0" does not solve the issue.”
    If anyone can please help, it would be greatly appreciated.
    Thanks,
    Jeff

    >in which respect is ACR4.4.1 so much better than it's predecessors?
    In a gazillion ways:
    http://photoshopnews.com/2007/05/31/about-camera-raw-41/
    and
    CLICK HERE FOR THE BOOK!

  • Hi, I just downloaded a bunch of RAW files into Lightroom 5.6 and they all look like they've been put through acid. Can someone please help? TYVM!

    Hi, I just downloaded a bunch of RAW files into Lightroom 5.6 and they all look like they've been put through acid. Can someone please help? TYVM!

    Jim and Rob, thank you for taking your time to respond. I have a mac & a pc with 4 gigs of RAM in each. I originally experienced the problem on my mac and afterwards the same thing happened on the pc. I shoot with a canon 5d mark iii and never had this problem before, but what I'm realizing is that I'm running out of space on both the mac & the pc. After an afternoon of shooting today, I filled up a 32-gig card, so my TB hard drives are filling up ridiculously fast. I need to drop some load off both drives and reboot. Hope this will resolve the issue as I really don't think it's a canon-LR problem (I'm using the most updated 5.6 version). Again, thanks for your input. I'll keep you posted.

  • Why can I only import xml, xdp, or xfd files into my pdf form?

    Why can I only import xml, xdp, or xfd files into my pdf form? Text (tab delimited) is not an option. I'm using Acrobat X Pro. Thank you in advance!

    Hello George -- The form was not created by me, but appears to have originated in Acrobat.  I also saved a copy with LiveCycle Designer to view/edit in design view.  Unfortunlately both files had the same limited formats for import.  Thanks, Julie

  • Canon 5D CR2 RAW Files Have Visible Artifacts

    There's a digital dithering pattern that's clearly visible on CR2 RAW files even with no adjustments in Aperture. Here are two example screenshots from Photoshop. The first is an 800 ISO image and the second is a 50 ISO image. I shoot RAW + JPEG.
    In the first, the JPEG from the camera, zoomed at 400% (top) and the equivalent JPG export at quality "12" (lossless) from the RAW image in Aperture with no adjustments (bottom). This is just the RAW, exported to JPEG at lossless 8 bit, same area at 400%. I experimented with 16-bit TIFF and PSD exports as well and the dithering pattern is the same:
    http://www.pipsqueak.com/imagehosting/ApertureJPGBug.jpg
    In the second, I took the original RAW, converted it to DNG format (I have to in order to use Adobe Camera Raw on CS 1) and imported into Photoshop using ACR "camera default" settings. I show that image at 12.5% at the very top and a detail in a window at 400% in the middle of the stack. The bottom image was created by bringing the RAW into Aperture and, without making any adjustments, exporting it as a 16-bit Photoshop file.
    I picked the blue area because it's easy to see the dithering pattern in a solid color. But it's there across the image.
    This is not just a high ISO or highly adjusted image problem. This is an EVERY image problem, at least with Canon 5D CR2 files.
    http://www.pipsqueak.com/imagehosting/ApertureExport_Bug02.jpg
    I've taken the same file, processed it using Adobe Camera RAW in Photoshop, exported it as a 16-bit PSD file and brought that into Aperture. Exports from that file are flawless. So I conclude that this has to do with the way that the OS is converting RAWs from the Canon 5D (or CR2s generally).
    Can this be a priority to fix? If Aperture can't export high quality images, its other truly admirable features will be for naught.

    Ian wrote a really good description of what RAW files are:
    http://discussions.apple.com/thread.jspa?messageID=1303439&#1303439
    Since the RAW file is encoding the chip information, and the two 1D2 and 1Ds2 cameras use different chips (they do, don't they?), then it's conceivable that they could have different results in Aperture.
    On the other hand, I thought that CR2 files had the same underlying file structure, so it's strange that they encode differently.
    Might it be possible to take some kind of test image with both cameras that is basically identical and has some areas that are dark? It would be interesting to compile a list of those cameras that have conversion issues and those that don't. I know the Canon 5D conversion is not so good, and that there's an Olympus problem (although I don't remember the camera). On the other hand, there are a number of Nikon users who seem pretty pleased with their conversions.

  • Opening Canon 6D .CR2 raw files with CS5 Extended

    Can't open Canon EOS 6D raw files with CS5. What is the minimum I need to do to open Canon  EOS 6D .CR2 raw files in Photoshop CS5 Extended version 12.1 x64, and Brige CS5 version 4.1.0.54, and Camera Raw version 6.7.0.339? I would rather not have to go through the hassle of first converting all files with the Adobe DNG - is there another option? Can I upgrade my Adobe software?

    Im having the same problem, and i use CS6
    Do you know if CC can open 6D .CR2 files?
    Thanks!

  • Canon S95 CR2 raw files not recognized

    I just bought my wife a Canon S95 specifically because it could produce raw files. I just tried to import her first pictures using Lightroom 3.2 and CR2 files are not supported. Silly me I did not check the supported camera list. The S90 is there but not the S95. When do you think Adobe will get around to supporting this camera?

    Hi Amir
    >As suggested above, use ExifTools.  After downloading it, you can simply run (under windows):
    thanks it worked great with a Mac as well, within terminal. I added overwrite to remove the original ( I had already made a copy)
    exiftool "-CanonModelID=PowerShot S90" -overwrite_original  /Volumes/DRIVE2/CanonS95/folder1 (wherever your files are located)
    here's a link to more exiftool info if anyone else wants to give this a try.
    http://www.sno.phy.queensu.ca/~phil/exiftool/install.html
    thanks
    j
    Jeff-
    >In general, ACR/LR gets updated 3-4 times per year based mostly on the number of new cameras released in a time period.
    thanks for the info, is the process of adding new cameras very involved, or are the delays because of difficulty getting raw data from the manufacturers?
    j

  • Can't import Canon S 50 Raw Files to PSE 4.0.1 in Mac 10.5.2

    Help. I'm transitioning from OS9.1 to 10.5.2. I brought my Firewire card reader and several CF cards of RAW CRW images from my Canon S 50 to the Apple store 2 months ago and was able to open them in PSE 4. Based on this I purchased an Aluminum 24" imac, put in 4GB of RAM and ordered Photoshop Elements 4. Reading the Adobe forums, two things were advised: upgrade to 4.0.1 and upgrade the RAW converter to v4.3.1. I did both and am unable to import the RAW CRW files from my Canon via CF card. They appear in Bridge, but do not open in Elements 4.0.1 . Have I done something wrong? My goal is to archive the files, but also convert them to DNG. Is the 4.3.1 upgrade wrong for these first generation Canon RAW files? I've scanned the archive prior to posting, and have posted to the PS Elements site. They suggested I ask advice here, as I've followed there upgrade advice and it didn't work. Thanks in advance. Paul

    The download did say it is for Photoshop Elements 4. That is what has me so confused. I can't find where Adobe lists what specific Camera RAW files each upgrade will work with. I'm wondering if I should have stayed with the original PSE 4 RAW converter rather than doing the upgrade? If I do go back, will the older DNG conversion still work with more modern software in the future? I just purchased Elements4 for Mac because I tested it at the Apple store and it worked in OS 10.5.1. I hope the 10.5.2 upgrade didn't mess things up? My wife will kill me if I can't produce images of our new grand nephew. We saw him 23 minutes after he was born last month in California! She wants the photos NOW.

  • "Canon SLR EOS 40D"  *Aperture and Canon's CR2 RAW files not supported.*

    Hi,
    I just started playing with Aperture, and with my brand new *Canon SLR EOS 40D* camera. One problem, Aperture is not recognizing the RAW file format. I am using RAW Fine**-L. Even with that it doesn't even see the JPG shots in Aperture. Went to the Canon site and it shows CR2 format. IPhoto 08 sees the JPG files just fine, It also sees the RAW files just doesn't know what to do with them. I know that RAW files are not supported on IPhoto 08. The camera is only been out a few months, but still lost on why Aperture doesn't support the format. Maybe I am missing something. Anyone have any ideas?
    Thanks in advance....

    For some reason or another Adobe Photo Shop 7 is no longer supported in Leopard. When you lunch Photo shop 7 in Leopard. You get "An unexpected and unrecoverable problem has occurred because of a Program error. Photo Shop will now exit." even if you reinstall the program, still you get the same error. Photo Shop 7 is Not the latest and greatest, but in most cases, that is all you need. Not sure if they plan on a fix, so for now I put that program on a shelve.
    Hope that helps

  • Why can I no longer drag and drop .mid files into GB?

    I can no longer drag and drop .mid files into GB. When I try, the track files flash and disappear. Please help
    Mac mini   Mac OS X (10.4.6)  

    found solution, thanx everyone

  • Aperture 2 won't recognize Canon G10 CR2 RAW files

    The Canon G10 just came out and I got one!! But Aperture will not recognize the CR2 files that it makes. Any idea how to make this work?

    If you can get your hands on a copy of Canon's Digital Photo Professional it may include the proper converters that you can use for now.
    For EOS utility to run the camera must be connected and running and I'm not sure the P&S cameras are recognized by that utility.
    I'm having trouble with G9 CR2 files on Aperture 2.1.2. When I import them they come in at 1:1 aspect ration meaning the preview is forced to fill the preview screen so all images look a little wide and verticals look really, really stretched out.
    When I go in and selected Apple -- Camera Default in the adjustments palettes it pops into the proper 4:3 ratio.
    Any way to get that as the default? I've tried selected all and hitting the Camera Default but only one image at a time is updated. Driving me crazy

  • Aperture 3.1.1 ignores color settings in Canon 7D .CR2 Raw files

    hi there!
    i have a problem with the import of pictures taken with my canon 7d.
    when i take pictures using color presets e.g. black/white, aperture ignores those completely during import. even if i open them in preview.app the settings are not applied. if i open the same picture in photoshop cs4 it will be displayed correctly in b/w.
    neither the updated of the raw processing (http://support.apple.com/kb/HT3946) nor the 3.6 raw update solved this problem for me.
    how can i fix this?
    thanks,
    paul

    hmm, this behaviour of aperture is a bit odd.
    i understand the approach but if i shot a few thousand images on a journey, i don't remember afterwards, which image was supposed to be b/w. this leads to a situation where i +have to post-process+ images. i would expect aperture asking me if i want to keep attached color settings instead of ignoring them!
    and, yes, i'm sure that this image is a raw. photoshop interprets the color settings correctly.

  • Why can't I drag an image or html file into a browser window with Firefox 17

    to get a quick view of various images or html files, I like simply dragging the files from my local drive into a Firefox browser window.
    since upgrading to FF 17, I can no longer do that. a NO symbol comes up when attempting this. and Dreamweaver will no longer preview with Firefox, even though it's my designated, preferred browser.
    anybody know if both of these are some setting or something?

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for

  • Combining Two Apple Accounts

    Not fully understanding how the DRM and user accounts work on ITUNES, when I received a second IPOD, I created a second ITUNES account and even put it on a second machine. Now, in order for me to have songs from my wife's IPOD, work on my IPOD, I hav

  • Can I use OLAP variable in ABAP Code of infoobject filter

    I have 0FISCPER infoobject in filter section of info-package while loading data. Below OLAP varaibles has below dynamic values that are being calculated at run time. 0P_PRFP2 -  (Current fiscal period - 2)   ex: 2010010 0P_PRFP1 -  (Current fiscal pe

  • Images Offline, NAS Drive in Finder but can't Reconnect

    Aperture 3.0.2, Mac OS 10.6.3 I have all referenced images on network drive. It's all there in the finder but aperture says it's offline. Furthermore, the reconnect button is always greyed out. Even more odd is sometimes when I relaunch Aperture, it

  • DW CC and MySQL - access denied

    I reinstalled the deprecated Server Behaviors and am having a heck of a time connect DWCC to MySQL in PHP. In frustration, I downloaded Navicat for Windows and, using the same credentials, Navicat connects to the MySQL without issue. I am running Win

  • Bulk Collect for Uncertain columns

    Hi Experts, how to use bulk collect for uncertain number of columns of select statement. Master table structure: Create table tabmst (id number, cls_input varchar2(2000), price number); insert into tabmst(1,'select product, prod_price from product',5