Why did Auto recharge set itself up??

Auto recharge was on my acount settings and I cancelled it. I received an email confirming this, then today I get an email from Skype giving a confirmation that Auto recharge has been setup.. I have had to come back onto skype to cancel this yet again. I DO NOT WANT AUTO RECHARGE! 

 Hi, tahunovas, and welcome to the Community!
My best advice is to never, ever assume anything, especially when an incident such as this occurs.  Please ...
 - Check your payment method issuer to ensure no fraudulent charges have been posted to your account, even if said charges were reversed. 
- Change your account password immediately. 
- Double-check that all of your privacy settings are "locked down" and that you can be contacted by your contacts only. 
- Ensure your computer's operating system updates and patches are installed; update your anti-virus/spyware/malware software and run it.
- Here is more information to review: http://www.skype.com/intl/en-us/security/online-sa​fety/
I would be wary if I were you, too, and recommend you report this incident to Skype Customer Service:  contact customer service
Best regards,
elainem77
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Similar Messages

  • Why did my library duplicate itself and how do I remove it?

    Why did my library duplicate itself and how do i remove them?

    An iTunes manual? It is supposed to be so intuitive you don't need a manual.
    http://www.apple.com/itunes/how-to/
    Most people don't have issues, but most people posting here do, obviously, why else would they come?
    With regards to the way iTunes works (when it is working as it is supposed to) if you use the software the way the designers expected you to it all works out OK. The problems start with those of us who think things should work slightly differently and get then confused with the results. At that point you either have to learn to work the way the program expects you to, or work around it. I encourage people to do work with it, as is easier, but in practice I write scripts to enforce my will on iTunes.
    tt2

  • Why did Droid RAZR reset itself?

    On Friday my Droid RAZR reset itself back to factory settings all by itself. It was fine, and then 10 minutes later when I looked at it my apps, contacts, photos, and everything else were gone. It was prompting me to set up the phone like it was brand new. First off, why did this happen? Second, can I get anything back?

    This happened on Friday, July 4. I was out of town for the weekend so when I got back I went to the Verizon store on Monday the 7th. I asked why this happened and how I could prevent it from happening again. They told me that sometimes phones do this on their own and they don't know why. There's nothing I can do to keep it from happening again, apparently. Because of my extended warranty they've ordered me a replacement phone for free which should arrive today.
    I had never signed up for Verizon Cloud so nothing was backed up from that phone.

  • Why did auto-save didn't save my entire project?

    Hello,
    I recently had some problems with auto-save. I was working on a project when my computer
    stoped working and I had to force shutting down. However, my Premiere CC is set to auto-save
    every 15 minutes. When I went to see the auto-save files I didn't find my entire work. I had several
    sequences previsously the one I was left with. What had happen?
    thank you,
                          Joao.

    Some versions of Premiere Pro won't start autosave until you do a manual save.  What version are you using?
    Did you try searching your drives for project files in the event that it went to an unexpected place?

  • Why did my iPod  reset itself when I was trying to watch a video?

    Hi Everyone,
    I was watching a video on my ipod and I got halfway through the video and the Ipod reset itself. My iPod is okay after it reset itself. I was wondering has this happened to anyone else and what can I do to fix it?
    I would appreciate any help.
    Thanks,
    lizabler

    Hey lizabler!
    I personally haven't experiened this specific thing myself, by I have certainly read issues like your quite a few times on the Discussions.
    When your iPod resets itself in this kind of case, this happens usually because, while you're playing a video on your iPod, it's not being able to continuouly load and play that video fast enough to actually play the video at a normal speed.
    This can be caused by the iPod's battery.
    How charged/discharged was your iPod around the time when your iPod reset itself? Try letting your iPod's battery fully die, then let it recharge for a full 3 hours, and see if this ever happens again.
    Also, if this ever happens again, have you tried resetting your iPod several times? (holding the "Menu" and middle buttons together for 10 seconds)
    Sometimes your iPod resetting itself can also be caused by your iPod's memory being highly used. For example, if you have a 60 GB iPod, and you've used up 54 GB of it already, this can sometimes somehow bog up the iPod, causing it to act strangely.
    If this iPod-resetting-itself behavior recurrs, and resetting the iPod several times doesn't help, try restoring your iPod to factory settings -> How to restore your iPod
    I hope that info helps you.
    -Kylene

  • Why did F4 beta uninstall itself after I put MacBook to sleep and had to be rebooted from the disc image?

    I put my MacBook to sleep with Firefox 4 beta open and when I went to use it again it had vanished. My spotlight search yielded v. 3.6 and the v.4 beta installation file (.dmg). I opened v. 3.6 and declined to transfer v4 Add-ons . All tabs that were opened on v.4 beta opened on v. 3.6. I closed 3.6 and reinstalled v.4 beta from the disc image. I was warned to replace previous version (3.6) - which I did. V4 beta installed intact (bookmarks, add-ons, history etc.) but I lost my open tabs. My only concern is that I was required to replace v. 3.6 and don't want to risk losing bookmarks and history if v. 4 proves unstable. I am otherwise pleased with the new look and performance.

    Yes, your iPhone has the classic signs of early onset Alzheimer's... 
    Assuming that nothing is pressing on the Home button when this occurs, try the basic steps as needed:
    1. Reset phone - press both home and sleep/wake buttons until the Apple logo appears.
    2. Restore phone in iTunes using a backup
    3. Restore in iTunes as new, without using a backup.
    If #3 doesn't help, there is a hardware problem such as a defective home button, and you should make an appt. with an Apple Store Genius bar.

  • Why did auto update stop working - check box greyed out!

    I suddenly realized it had been months since I had seen an update at home, but was getting them regularly on my office machine. Checking help about I found I was running 3.0.6, I tried to click the check for updates and it was greyed out. Checking options/advanced/updates I found the box was checked but greyed out.
    I had turned off checking for updates in my wife's account as she has no privilege and is not computer literate. I run my account without privileges but provide admin password when requested.
    My solution obviously was to download the current version (3.6.11) and no longer are any boxes greyed out.
    Question is - have I set up Netscape in a way that will result in the problem reoccurring?

    None taken. Firefox is built off what used to be the Netscape browser; common parentage.
    You might need to login to an admin account to update Firefox with Win7, but that's purely conjecture. 3.0.6 is so old that I wouldn't worry about it anymore; see if 3.6.11 updates automatically or from the Check for Updates menu item once 3.6.12 is released.

  • Why did a file attach itself to sent mail without my clicking the attach button?

    I sent an email that I did not attach anything to. When I checked my sent folder I saw there was an attachment on it. Clicking on the attachment opens the Adobe Reader and says the file is damaged.
    This happened with a gmail address. When I checked it on gmail, there was no attachment.
    Do I have a security problem?

    If you see the message you sent on the server your account must be IMAP. Then it's not possible that you do see something different in Thunderbird than on the server. I guess you left something out in your problem description.
    What kind of file is the actual attachment?

  • Auto attendant set itself to inactive...

    And I can't get it to activate! In fact, I can't even tell why it went inactive on me. All scripts are there, any clues?
    RL

    This seems to be a common problem with Exchange but everyone says to do the All Calls rules which I have already done.
    Anyone have any suggestions?

  • Why did Auto Add to iTunes stop working?

    I recently started using Handbrake to covert some of my DVDs/BRs to Apple TV 2 (m4v) format for my 2 year old to watch without killing my physical media.  Typically, I would covert the file, drop to the Automatically Add to iTunes folder, go in to iTunes and update the title info and artwork etc, and everything would be great.  However, after the last iTunes update, things are not working correctly anymore.  The problem begins when I add the file to the Automatically Add to iTunes folder.  iTunes will now add multiple copies of the movie/TV show to iTunes, but it is not moving the file to the proper location.  For example, I made an m4v of Tinkerbell and the Great Fairy Rescue.  Once I added the file to the Automatically Add to iTunes folder, iTunes became unresponsive.  Then I noticed I had 5 copies of this movie in the Movie listing in iTunes.  The physical file is still in the Automatically Add to iTunes folder, and all 5 movies link back to this movie file.  I tried a repair on iTunes, and this behavior is still occurring.  Any suggestions?

    I am experiencing the same and looking for a solution, this is quite annoying.  "Automatically add to itunes folder" was working fine until the last Itunes update.

  • Why did my App Store delete itself and no other apps and how can I fix this?

    Why did my AppStore delete itself and no other apple icons and how can I fix this .?

    Don't get your knickers in a twist
    This is a site with volunteers to answer the questions

  • Why did my TB not do the auto-compact thing?

    I'm just wondering...
    My ThunderBird install has this default setting of "compress folders if it saves more than 20 MB in total".
    And I have the Dutch language translation installed (don't know how to change it to English....) but as with many software translations, it uses some bad terms which confuses people.
    I believe in English TB uses the word "compact" but in Dutch it says "comprimeren" which always only refers to compression in the sense of ZIP/RAR/GZIP etcetera. Because of that I have never manually chosen to "comprimeren" because I didn't understand what it meant.
    I believe from time to time TB has asked me whether I wanted to do that thing, and I still didn't know what it was supposed to do, so I never chose to.
    In the end, today, I made a backup of my entire IMAP remote collection and it turned out to be only a meagre ~500 MB whereas the data for Thunderbird itself (full offline sync) took up 1.2 GB.
    And then I finally chose to "compress" and now the backup and the actual Thunderbird folders/files are identical in size, save for the TB index.
    And that means I have had about 600 MB of deleted messages still sitting in my INBOX.
    There is another option that translated to something like "Clean up your Inbox (expunge) when closing?" and I have no clue what it is supposed to do and there is also no tooltip or anything. Does it refer to the compact action? Does it refer to moving deleted (now invisible) messages to Trash? I have no idea and when I open my folders in another client (Alpine) it actually shows these "deleted" flags on those messages that I have supposedly "deleted" from Inbox (and that have already been copied to the trash folder). I suppose that's what expunge means - to get rid of those messages.
    Alpine however is much more consistent, but now I have this (nonproblematic) feature:
    I have a filter in Alpine set up to also move 'expunged' messages to Trash upon expunging them. Otherwise Alpine would just delete everything with no fallback. It would be gone = gone.
    So if I delete a bunch in Thunderbird, and then open and exit Alpine, all of those deleted messages are now featured twice in the Trash, once copied there by TB, and once copied there by Alpine :p.
    I don't know what the actual point is of keeping "deleted" messages in any folder if you have already visually indicated they are gone and they have been moved elsewhere. Is there some sort of "undo" mechanism involved? There is no action anywhere in TB that *I* can see that would benefit from something like this?
    For Alpine, the "D" (delete) action only flags messages. Then, upon exit they are usually expunged. With my custom filter, they are expunged and saved to Trash. But TB instantly deletes and moves them, which is fine by me, but I don't understand why it doesn't clean up behind itself.
    Is there any use case where NOT expunging these 'flagged' messages has benefits, in terms of Thunderbird?
    And I have heard people talk about auto-compacting, but why did such a thing never happen?

    re: TB marks messages for deleted both in its offline copy and in the IMAP proper,
    Any changes such as deleting a message, will mark that email as deleted.
    In thunderbird this will move the email from the Inbox view (''Note this will depend on the deleting method - see below'') and place it in Trash, but in reality it is still in the Inbox folder just 'marked as deleted'.
    As the Server folders and TB folders are looking at the same folders, this will show up on the server as 'marked as deleted'.
    Thats because they are one and the same folders.
    In Thunderbird, you can select to manually Compact all Folders:
    File > compact folders.
    This compacts all folders, removing all 'marked as deleted' emails in Thunderbird..
    when synchronised folders connect with server, those emails are deleted off the server.
    You can also choose to manually compact any single folder.
    right click on folder and select 'compact'.
    There is also an auto compaction function which is initialised when the selected threshhold has been reached.
    This is set up here:
    Tools > Options > Advanced > Network & Disc Space tab
    select the checkbox 'Compact all folders when it will save over eg: 20MB in total.
    click on OK.
    Note if you have been manually compacting or expunging the Inbox on exit then this may not get triggered as often or at all if the threshold is not reached.
    IMAP mail accounts also have the additional option to Expunge emails on the Inbox on Exiting Thunderbird..
    "Tools -> Account Settings -> Server Settings -> Clean up ("Expunge") Inbox on Exit', which will compact the Inbox folder when you exit Thunderbird.
    note this only occurs on the Inbox.
    If you check "Empty Trash on Exit" it will also empty and compact the Trash folder when you exit.
    However, some methods of deleting in IMAP mail accounts can disable this auto expunge. see below.
    '''IMAP mail accounts also have different choices when it comes to deleting.'''
    * http://kb.mozillazine.org/Deleting_messages_in_IMAP_accounts
    Tools -> Account Settings -> Server Settings for the mail account
    "When I delete a message" has choices for "Move it to the Trash folder", "Mark it as deleted" and "Remove it immediately".
    Your choice of method of deleting may explain why you are not always seeing auto expunging.
    suggest you try option: "Move it to the Trash folder".
    Otherwise you will need to use the folder 'compact' options explained above to compact the folder.

  • Why did Word on Office 2013 REMOVE Auto Correct from Right-Click Context Menu??

    Hi Microsoft -
    I normally don't rant, but this is a killer feature removal, and the reason given is for aesthetics - 'Removal of clutter" is how it's worded here:
    [Changes in Office 2013]
    http://technet.microsoft.com/en-us/library/cc178954(en-us).aspx
    I copy n pasted below the operative row from the linked TechNet page as to the reason WHY this critical (and very popular feature) has been removed from Microsoft Office 2013 Word's context-menu: LESS CLUTTER
    And your answer is ambiguous and doesn't solve the issue that you created to make things prettier: "Click the AutoCorrect Options button" Then what?  ADD EACH WORD MANUALLY? 
    Please advise ALL OF US that want this feature back how to have our commonly misspelled words fixed and added automatically to the dictionary.  If I am missing this in a major way somehow, I apologize completely and will issue a public apology via any
    social media platform of your choice.  If it really is gone, and I have to manually add the entries into a buried table 6-clicks deep, then I will issue a public excoriation of this feature on as many social platforms of my choice.
    Sincerely,
    Maximus Mednick
    COPY N PASTE AS FOLLOWS:
    =-=-=-=-=-=-=-=
    Contents of spelling error context menu
                    Word and WordMail within Outlook
    Modifying the feature
    Auto-Correct and certain formatting tools are no longer available from the spelling error context menu.
    To make Word 2013 cleaner and less cluttered, we removed AutoCorrect and certain formatting tools from the spelling error context menu. The features are still available in Word 2013 through other entry points within the Word user interface.
    Less clutter in the spelling error context menu. This enables users to find popular commands more quickly. In addition, the spelling error context menu now fits better on the screen.
    To change AutoCorrect options, do the following:
    Choose File -> Options -> Proofing
    Choose the AutoCorrect Options button.
    =-=-=-=-=-=-=-=
    Thanks, MAXIMUS

    Microsoft used to be about allowing users to customize the OS and apps however they want. This was one reason I have always preferred Windows over Mac. There are 5 ways to do any one thing, and you can customize it to do it however you want. It's all about
    user choice. Please don't go the way of Apple and force users into the way that you *think* we should do things. 
    <rant>
    While I whole heartedly agree with this suggestion, if you look through this blog about the design decisions that went into the 2007 ribbon:
    Jensen Harris: An Office User Interface Blog -
    http://blogs.msdn.com/b/jensenh/archive/2008/03/12/table-of-contents.aspx
    You'll see that one of the considerations of the ribbon was to ELIMINATE/REDUCE customization because it was costing large corporate customers too much time/money to support their users with 2003 customized menu/toolbars.  In other words, the ribbon
    was intentionally built as a fixed design so that average user cannot change it.  The QAT was an afterthought, a sop, to allow users minimal customization. 
    They found that the 2007 lock down was too much of a "good thing", too much like the good old "IBM 360 green screen" (even if most people don't recognize the reference), so in 2010 they
    re-introduced limited Ribbon customization within the UI.
    But you still can't customize the default tabs. And to add injury to insult, if you do want to customize a default tab and go to the effort of trying to recreate the default tabs and groups
    within the Ribbon UI, you'll eventually find that YOU CAN'T'! There is no way inside the UI to force the buttons to layout the same way! AHHH!
    Even in 2007,
    EXPERTS have had the option of creating custom Ribbons/tabs by editing XML, but that is pretty serious programming, out of scope for 99% of users.
    The "solution" to the problem was too simple. Just add an option to allow users to turn on the old menu UI.  Even if it had been buried as a registry hack, the people who really wanted it would have learned about it. Then MS could have collected statistics
    on usage that would have "proved" that the menu was preferred over the ribbon.  The thing is, if the ribbon was defaulted "out of the box", over time people would eventually all switch over to it. Simply because it was the default, because MS only produced
    new training material referring for the ribbon
    Now, I'll concede that the ribbon really may be more "intuitive", but only for new users. For long time users the change is very jarring.
    They made the same choice with Windows 8.  In the last Windows 8 consumer Preview there was a registry hack to bypass the Start Screen.  I learned about it in July or August. But MS was so sure the Start screen/metro was the only way to go they
    rushed out a Windows Update to eliminate that registry entry. And it was eliminated from the RTM version. 
    WHY?
    Why did they remove the user's right to chose the UI that worked best for them? I don't know.
    </end rant>  sorry, this is a hot button for me.

  • Western iso 8859-1 character set is gone, "other (including Western" does not work. Why did you take it out?

    Some websites need Western ISO 8859-1 character set to run properly and you have taken it away in favour of "other(including Western)", now the site does not work properly. Why did you take it out and can you please put it back.

    ISO-8859-1 and Windows-1252 should be equivalent. Can you provide an example of a page that doesn't display properly?
    If you have to manually select a character encoding to view the page correctly, then the site is broken and you should notify its owner that it needs be fixed. Websites specify the character encoding in one of two ways:
    * [http://www.w3.org/International/tutorials/tutorial-char-enc/ Handling character encodings in HTML and CSS | W3C]
    # The ''Content-Type'' response header.
    # The ''meta'' tag in the page source.
    ''Henri Sivonen (:hsivonen) wrote:''
    <blockquote>We are in the process of implementing http://encoding.spec.whatwg.org/ . The process involves removing support for legacy character decoders that aren’t really necessary for supporting existing Web content.</blockquote>

  • HT204074 Why did apple set a 90 day lock out to apple devices?

    Why did apple set a 90 day lock out to apple devices? I bought my dad a new iphone 5s. He decided to give me his old iphone 4s but i cant download my purchased programs from my apple ID. I got a notification saying that the phone is associated/identified with another apple ID then automatically locked my apple id for 90days. I dont understand why they had to set a 90 day timer.

    "Why did apple set a 90 day lock out to apple devices?"
    No one can tell you why Apple makes the decions that they do and discussing their decisions/policies is not allowed here.

Maybe you are looking for

  • User not able to Change Password in Webaccess

    We are running GroupWise 7.0.3 HP3. We have one user who is not able to change her password in Webaccess. Whenever she tries, she get the following error message in Webaccess Ldap Password Change Failed. Contact your system administrator. When I look

  • Getting Error in creating weblogic domain in silent mode.

    Hi, I want to create a weblogic domain in silent mode. When I execute the command  ./config.sh -mode=silent -silent_xml=/home/oracle/silent.xml, I am getting the error given below. bash-3.00$ cd /apps/Oracle/Middleware/oracle_common/common/bin bash-3

  • Program SAPLSBAL_DB taking long time for BALHDR table entries

    Hi Guys, I am running a Z program in Quality and Production system both which is uploading data from Desktop. In Quality system the Z program is successfully uploading datas but in production system its taking very long time even sometime getting tim

  • Is apple gonna do something about our battery?

    Hello, Doens anyone knows if apple is planning on doing something real about the iphone 4s battery problem? Its my first Iphone and I already regret from switching from the android. All those features have no use if the battery can't stand more then

  • FCE crashes too often

    working with FCE HD 3, getting the hang of it pretty good. but it keeps crashing. any ideas on ways to cut down on that? i don't run anything processor intensive (e.g. iTunes) at the same time. restarting doesn't necessarily improve things. PowerBook