Why did auto-save didn't save my entire project?

Hello,
I recently had some problems with auto-save. I was working on a project when my computer
stoped working and I had to force shutting down. However, my Premiere CC is set to auto-save
every 15 minutes. When I went to see the auto-save files I didn't find my entire work. I had several
sequences previsously the one I was left with. What had happen?
thank you,
Joao.

Some versions of Premiere Pro won't start autosave until you do a manual save. What version are you using?
Did you try searching your drives for project files in the event that it went to an unexpected place?

Similar Messages

Why did Auto recharge set itself up??

Auto recharge was on my acount settings and I cancelled it. I received an email confirming this, then today I get an email from Skype giving a confirmation that Auto recharge has been setup.. I have had to come back onto skype to cancel this yet again. I DO NOT WANT AUTO RECHARGE!

Hi, tahunovas, and welcome to the Community!
My best advice is to never, ever assume anything, especially when an incident such as this occurs. Please ...
- Check your payment method issuer to ensure no fraudulent charges have been posted to your account, even if said charges were reversed.
- Change your account password immediately.
- Double-check that all of your privacy settings are "locked down" and that you can be contacted by your contacts only.
- Ensure your computer's operating system updates and patches are installed; update your anti-virus/spyware/malware software and run it.
- Here is more information to review: http://www.skype.com/intl/en-us/security/online-safety/
I would be wary if I were you, too, and recommend you report this incident to Skype Customer Service: contact customer service
Best regards,
elainem77
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Why did auto update stop working - check box greyed out!

I suddenly realized it had been months since I had seen an update at home, but was getting them regularly on my office machine. Checking help about I found I was running 3.0.6, I tried to click the check for updates and it was greyed out. Checking options/advanced/updates I found the box was checked but greyed out.
I had turned off checking for updates in my wife's account as she has no privilege and is not computer literate. I run my account without privileges but provide admin password when requested.
My solution obviously was to download the current version (3.6.11) and no longer are any boxes greyed out.
Question is - have I set up Netscape in a way that will result in the problem reoccurring?

None taken. Firefox is built off what used to be the Netscape browser; common parentage.
You might need to login to an admin account to update Firefox with Win7, but that's purely conjecture. 3.0.6 is so old that I wouldn't worry about it anymore; see if 3.6.11 updates automatically or from the Check for Updates menu item once 3.6.12 is released.

Why did Auto Add to iTunes stop working?

I recently started using Handbrake to covert some of my DVDs/BRs to Apple TV 2 (m4v) format for my 2 year old to watch without killing my physical media. Typically, I would covert the file, drop to the Automatically Add to iTunes folder, go in to iTunes and update the title info and artwork etc, and everything would be great. However, after the last iTunes update, things are not working correctly anymore. The problem begins when I add the file to the Automatically Add to iTunes folder. iTunes will now add multiple copies of the movie/TV show to iTunes, but it is not moving the file to the proper location. For example, I made an m4v of Tinkerbell and the Great Fairy Rescue. Once I added the file to the Automatically Add to iTunes folder, iTunes became unresponsive. Then I noticed I had 5 copies of this movie in the Movie listing in iTunes. The physical file is still in the Automatically Add to iTunes folder, and all 5 movies link back to this movie file. I tried a repair on iTunes, and this behavior is still occurring. Any suggestions?

I am experiencing the same and looking for a solution, this is quite annoying. "Automatically add to itunes folder" was working fine until the last Itunes update.

I have saved a lot of videos from my tube app but my ipad is crashing and I was told to back up my ipad and reset but last time I did it didn't save my videos and I am scared I will have to redownload my videos individually again ...anyone know another wa

I have saved a lot of videos from my tube app but my ipad is crashing and I was told to back up my ipad and reset but last time I did that , it didn't save my videos and I am scared I will have to redownload my videos individually again ...anyone know another way to save these videos?

Save the videos to your computer. There must be some way to do it. Read the documentation that came with the app or go to the app online support. Perhaps it uses iOS file Sharing.
If it is this app, it states in the description that you can transfer the videos to your computer via USB or WiFi.
https://itunes.apple.com/us/app/tube-downloader-pro-free-video/id586168976?mt=
I have have an app called Wireless Transfer App. It allows me to send photos and videos to and from the iPad and computer over WiFi.
https://itunes.apple.com/us/app/wireless-transfer-app-share/id543119010?mt=8
If that is not the app that I reference above, post back with the exact full name of the app.

Auto-save didn't!!

After nearly 4 hours of editing in PE7, I got the Windows XP error message telling me that the program had encountered a problem and needed to shut down. Just before that, I had clicked on the button to make a DVD. My first reaction was that I wouldn't have lost much because auto-save was enabled, with saves every 20 minutes. However, virtually no edits had been saved. Looking at the PREL files in the autosave folder, I saw that there had been three saves from three hours previous, before I had done much work. For some reason PE7 had stopped autosaving. In preferences, auto-save is still enabled. I have both versions 3 and 7 installed on my PC, and this project was originally started in 3, so many files are saved in the version 3 folders including the PREL files, if that matters.
Any ideas what went wrong? I know that auto-save used to work reliably. Searching the forum and knowledgebase turns up nothing about this problem.
(my computer is a PC with an Intel 6700 Duo Core Pentium CPU and 2G of RAM running Windows XP Pro SP3)
Additional: I now see in the help file something I didn't notice before. It states "Note: Each time you open a project, you must save it at least once before the Auto Save option takes effect." I don't recall having manually saved it even once, yet it did auto-save three times, as mentioned above.

Thanks guys. I may set a timer to remind me to do my own saves next time. The autosave periods were the default 20 minutes, and I still don't understand why there were 3 saves early on, during a time when I was away from the computer. Only after I resumed working did that function stop. One more thing: the help file says that when restarting after a crash I should have seen a message asking if I wanted to resume from the last saved configuration, or something like that. There was no such message. Also, I see that the autosave PREL files are contained in the Autosave folder, but there is also a PREL, apparently the newest one, in the file path one level higher where all of the data files are contained.
This is a little bit away from the original question, but can I now delete version 3 since I'm (generally) satisfied with V7. I don't want to jeopardize the current project, which still has some more editing to be done, especially after losing the aforementioned edits.
One more thing: would increasing RAM from the current 2 gigs help prevent a crash like the one the occurred.

I took photos and they saved in my camera roll. they were there the next morning. I took more pictures and they are all gone. why did they not save and can i get them back ?

I took photos on my iPhone on yesterday and they all saved. I looked at my photos the next day and they were still there. I took more photos and now none of the last photos that I took in the last two days are there. Why did they not save? Can I get them back? My storage was not full. I just updated my iPhone to ios 7.1 a few days before.

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Cropped a jpg and did a "ctrl s" to save it but everytime I do, it wants to save as a .PSD, why?

Trying to crop a couple of hundred images. Was using CS2 to do it but then I thought why not use CS6 to do it. Opened a jpg, cropped it the way I wanted and did a ctrl s to save it, only to find it wants to save it as a psd. Not cool.

Perhaps it's because you may not have "Delete Cropped Pixels" checkmarked if you use the Crop Tool in CS6.
Your background layer then turns into Layer 0, a floating layer, and cannot be saved as a jpeg, so PS saves it as a psd, becattuse that format supports floating layers.
How, where would one do that? Checkmark the "delete cropped pixels"? My background layer is turning to a Layer 0.
Thanks!

Why did they skip the "save as" command in the last version of Keynote? how do I rename an existing keynote presentation quickly?

Why did they skip the "save as" command in the last version of Keynote? How do I rename an existing keynote presentation quickly without the "Save As" command??

Why did they skip the "save as" command in the last version of Keynote? How do I rename an existing keynote presentation quickly without the "Save As" command??

Why did you take away the feature that allowed me to save several tabbs when i close the webbrowser?

Why did you take away the feuatre that allowed me to save several tabbs when i close the webbrowser?

Firefox 4 saves the previous session automatically. <br />
You can use '''Firefox''' button > '''History > Restore Previous Session''' to get the previous session. <br />
There is also a '''Restore Previous Session''' button on the default '''about:home''' Home page.

Why did using i cloud back up save multiple copies of my photos and sync photos from my iphone that i cant delete?

why did using my i cloud back up save multiple copies of my photos and sync unwanted photos from my computer?

I did that, and it did not work. But I will try it again.
EDIT* Finally!!! I have done this several times, and it hasnt worked. You comment that I should do that and it works.
thanks

Why did my TB not do the auto-compact thing?

I'm just wondering...
My ThunderBird install has this default setting of "compress folders if it saves more than 20 MB in total".
And I have the Dutch language translation installed (don't know how to change it to English....) but as with many software translations, it uses some bad terms which confuses people.
I believe in English TB uses the word "compact" but in Dutch it says "comprimeren" which always only refers to compression in the sense of ZIP/RAR/GZIP etcetera. Because of that I have never manually chosen to "comprimeren" because I didn't understand what it meant.
I believe from time to time TB has asked me whether I wanted to do that thing, and I still didn't know what it was supposed to do, so I never chose to.
In the end, today, I made a backup of my entire IMAP remote collection and it turned out to be only a meagre ~500 MB whereas the data for Thunderbird itself (full offline sync) took up 1.2 GB.
And then I finally chose to "compress" and now the backup and the actual Thunderbird folders/files are identical in size, save for the TB index.
And that means I have had about 600 MB of deleted messages still sitting in my INBOX.
There is another option that translated to something like "Clean up your Inbox (expunge) when closing?" and I have no clue what it is supposed to do and there is also no tooltip or anything. Does it refer to the compact action? Does it refer to moving deleted (now invisible) messages to Trash? I have no idea and when I open my folders in another client (Alpine) it actually shows these "deleted" flags on those messages that I have supposedly "deleted" from Inbox (and that have already been copied to the trash folder). I suppose that's what expunge means - to get rid of those messages.
Alpine however is much more consistent, but now I have this (nonproblematic) feature:
I have a filter in Alpine set up to also move 'expunged' messages to Trash upon expunging them. Otherwise Alpine would just delete everything with no fallback. It would be gone = gone.
So if I delete a bunch in Thunderbird, and then open and exit Alpine, all of those deleted messages are now featured twice in the Trash, once copied there by TB, and once copied there by Alpine :p.
I don't know what the actual point is of keeping "deleted" messages in any folder if you have already visually indicated they are gone and they have been moved elsewhere. Is there some sort of "undo" mechanism involved? There is no action anywhere in TB that *I* can see that would benefit from something like this?
For Alpine, the "D" (delete) action only flags messages. Then, upon exit they are usually expunged. With my custom filter, they are expunged and saved to Trash. But TB instantly deletes and moves them, which is fine by me, but I don't understand why it doesn't clean up behind itself.
Is there any use case where NOT expunging these 'flagged' messages has benefits, in terms of Thunderbird?
And I have heard people talk about auto-compacting, but why did such a thing never happen?

re: TB marks messages for deleted both in its offline copy and in the IMAP proper,
Any changes such as deleting a message, will mark that email as deleted.
In thunderbird this will move the email from the Inbox view (''Note this will depend on the deleting method - see below'') and place it in Trash, but in reality it is still in the Inbox folder just 'marked as deleted'.
As the Server folders and TB folders are looking at the same folders, this will show up on the server as 'marked as deleted'.
Thats because they are one and the same folders.
In Thunderbird, you can select to manually Compact all Folders:
File > compact folders.
This compacts all folders, removing all 'marked as deleted' emails in Thunderbird..
when synchronised folders connect with server, those emails are deleted off the server.
You can also choose to manually compact any single folder.
right click on folder and select 'compact'.
There is also an auto compaction function which is initialised when the selected threshhold has been reached.
This is set up here:
Tools > Options > Advanced > Network & Disc Space tab
select the checkbox 'Compact all folders when it will save over eg: 20MB in total.
click on OK.
Note if you have been manually compacting or expunging the Inbox on exit then this may not get triggered as often or at all if the threshold is not reached.
IMAP mail accounts also have the additional option to Expunge emails on the Inbox on Exiting Thunderbird..
"Tools -> Account Settings -> Server Settings -> Clean up ("Expunge") Inbox on Exit', which will compact the Inbox folder when you exit Thunderbird.
note this only occurs on the Inbox.
If you check "Empty Trash on Exit" it will also empty and compact the Trash folder when you exit.
However, some methods of deleting in IMAP mail accounts can disable this auto expunge. see below.
'''IMAP mail accounts also have different choices when it comes to deleting.'''
* http://kb.mozillazine.org/Deleting_messages_in_IMAP_accounts
Tools -> Account Settings -> Server Settings for the mail account
"When I delete a message" has choices for "Move it to the Trash folder", "Mark it as deleted" and "Remove it immediately".
Your choice of method of deleting may explain why you are not always seeing auto expunging.
suggest you try option: "Move it to the Trash folder".
Otherwise you will need to use the folder 'compact' options explained above to compact the folder.

How the **** do i get back my library i was just using.No didn't save image or restore been using it for months the same way no tells me to choose or create a library and my previous versions don't recover

How the **** do i get back my library i was just using.No didn't save image or restore been using it for months the same way no tells me to choose or create a library and my previous versions don't recover.Please help I just deleted all doubles did allmy artwork Etc..

Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store

HT1338 how do I recover a document I was working on but didn't save?

I was working on a document and didn't save when my program crashed. Does anyone know how I can recover this document?

I'm assuming the program in question was MS Word, judging from the tags you used. Word has an AutoRecover feature that may be of some assistance, but only if you had it turned on. If you did, you may be able to find your document here:
/Users/username/Documents/Microsoft User Data/Office version AutoRecovery/Autorecovery save of filename
If you didn't have AutoRecover turned on, there's nothing you can do to get that document back.

Why don't group tabs automatically save? Please answer.

I set up the group tabs and they worked, but then I left the group to a site not in the groups. When I clicked on the group tabs icon to get back to the group tabs, the group windows were there, but empty except the site that I was currently on was in showing on top (in) one of the groups.
I find no clear instructions on how to save these group tabs and their content, or reopen them in another session.
Please explain how to save these group tabs and then reopen them.
If you are going to post an answer instead of sending me an email, I'll never find it - please send me an email answer.
Rich

I have already tried the suggestions at the "tab-groups-organize-tabs" page.
This is not an answer. If you can successfully save these group tabs tell me how, don't refer me to instructions that don't work. By the way, I tried closing the browser with the upper left menu/exit; groups were gone. I checked the options/settings and did as recommended -didn't work. I'm at this point pretty much convinced that it is a bug in the program that Mozilla has not yet addressed; yet they still send emails suggesting you try their groups tabs function! Just a waste of my time to email me suggestions that don't work.

Why did auto-save didn't save my entire project?

Similar Messages

Maybe you are looking for