Why do I get an error message that the IP address of my new Airport Extreme base station is invalid?

I have tried several times to replace my Airport Express with Airport Extreme by following the instructions. These attempts were made with both options, Replace an Exiting Network and Create a New Network. I get to the Setup is Complete page and wait for the base station to restart. The amber light goes from solid to flashing but never turns green. After waiting several minutes I get the problem page stating that the IP address is invalid. I have powered off my computer and modem, reset the Airport Extreme and tried again witht he same result. I am now back on Airport Express to enable connection to the Internet.
Any suggestions?

There are three Airport resets, soft, hard and factory default. It would probably be beneficial if you tried each one in sequence. Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.

Similar Messages

TS1424 Why would I get an error message that the file I am trying is corrupted?

I am trying to download a song (using my laptop-Windows8) and I keep getting a message that the file is corrupted. Advice, please?

Leslie Tanaka
Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
Let us go back over that Adobe document regarding troubleshooting damaged projects.
3. Delete the Application Preferences
Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
7. Test to see if individual media files are causing the problem.
That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
Please review and consider.
Thank you.
ATR

Why am i getting an error message that says "an unknown error has occured" when i try to update my apps in the app store

Can someone please offer some suggestions why I am getting an error message that says "an unknown error has occured" when I try to download or update my apps in the app store?
Thanks!
disregard! i noticed someone else's post about signing out of the app store and signing in again and it worked.....

Hi ...
Try here > Mac App Store: "An unknown error occurred (100)" when purchasing
If that doesn't help, drag the App Store icon straight up off your Dock so it goes, "poof".
Now drag the App Store icon from your Applications folder to the Dock. Try updating your apps.

I am having trouble downloading purchased songs to my iphone. I keep getting an error message that the song could not be downloaded. Why? How do I fix this?

I am having trouble downloading purchased songs to my iphone. I keep getting an error message that the song could not be downloaded. Why? How do I fix this?

Hello Dawnellk,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Previous purchases may be unavailable if they have been refunded or are no longer on the iTunes Store.
Best of luck,
Mario

HT1349 When I click on a song in iTunes, I get an error message that the song could not be located. This just started happening. Why? And how can I fix this?

I have all of my songs on an external hard drive. It was working fine with iTunes; now when I click on a song, I get an error message that the song cannot be located. What happended and more importantly, how can I fix this?

Is this an iPad issue? Not sure where you are "clicking" or how you are accessing. A little more info would help.

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

Leslie Tanaka
Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
Let us go back over that Adobe document regarding troubleshooting damaged projects.
3. Delete the Application Preferences
Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
7. Test to see if individual media files are causing the problem.
That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
Please review and consider.
Thank you.
ATR

Updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??

updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??

hello!
i have a similiar problem:
i upgraded my mac from 10.6.8 to 10.7.something recently, but i did NOT update itunes, still running version 10.4.1. now i wanted to open itunes but it tells me, that my iTunes Library.itl was created by a newer version of iTunes - which i never used!
its annoying since i dont want to be forced to download a 720MB pckage of itunes every month - even more so, if the system start "lying" to me.
or is it another problem? anyone got the same? any solution? maybe an erratic prompt?
thanks, florian

I am trying to re-install Photoshop CS6. The files have downloaded but I get and error message that the Adobe Support Advisor is required to determine what the installation probIem is. I click on the link that says "get the Support Advisor here only to be

I am trying to re-install Photoshop CS6. The files have downloaded but I get and error message that the Adobe Support Advisor is required to determine what the installation probIem is. I click on the link that says "get the Support Advisor here only to be told the Support Advisor no longer exists!! A blind loop. I need to have Photoshop CS6 installed...what do I do from here??

The CC Cleaner Tool assumes the Akamai Download Manager is activated and it has not. It seems to be the missing file that triggers the error message. \in a previous re-install I was prompted to download & install the Akamai Download Manger, but not this time. Is there somewhere on the Adobe website that I can download it??

TS3899 When I send an email I get an error message that the receiver does not allow "relaying" it doesn't matter who the recipient si

When I send/forward an email I get an error message that the recipient does not allow "relaying". It doesn't matter who the recipient is.

Go into Settings>Mail, Contacts, Calendars>your account>Outgoing mail Server>SMTP>Primary Server then turn Server ON and fill in both User Name & Password>under Outgoing Mail Server.

I am trying to add my brother printer series HL-2270DW, but I keep getting an error message that the software is currently when it tries to install it.

I am trying to add my brother printer series HL-2270DW, but I keep getting an error message that the software is currently unavailable. How do I fix this?

I am also having this same problem. I have updated my computer. I have downloaded the complete brother driver package from Apple as well as the drivers from Brother. As far as I can tell, all have been installed successfully. It is only when I try to ADD the printer do I get that message. Both my roomate and I have Macbook Airs so we cant use the disk which came with the printer. This is irrelivant anyway as the drivers have been successfully downloaded and installed. SO FRUSTRATING!!!!!

HT3500 I keep getting an error message that the "spools are full". How do I access the spools and how do I empty them?

I keep getting an error message that the "spools are full". Where do I find them and how to empty them?

You may be able to determine the reason for this error by examining your Mac's logs with Console. To do that find the Console app - it is in your Utilities folder and looks like this
You can find it by selecting Utilities from the Finder's Go menu.
Open Console.
If the log list column on the left is not already displayed, show the log list by selecting Show Log List from Console's View menu.
Locate system.log in the list and select it. Many date and time-stamped entries will appear, hundreds of them, and you must find the entries relevant to your Mac's problem. To do that choose Clear Display from Console's toolbar. Leave Console running while you choose Print from iPhoto again. Examine any new entries logged in Console. If there are any, copy and paste them in a reply.

I am getting an error message, that the laser can't calibrate to burn a cd.

I am getting an error message, that the laser can't calibrate to burn a cd. Is there a way to fix this?

If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(95452)

I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing". Can anyone help with this?

I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing". Can anyone help with this?

It keeps telling me to reinstall iTunes, but it continues to come back with the same error message.

Getting a error message that the song From time by Drake not sync.

Getting an error message that the song called From time by Drake not sync. or could not convert.

'''''Other Issues''''': to correct security/stability issues
'''Install/Update Adobe Flash Player for Firefox''': your ver. 10.0 r45; current ver. 10.1 r53 ('''important security update 2010-06-10''')
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer.
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''and'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

Why do I get an error message that says "Your Apple ID is not eligible to purchase gift certificates?"

I am trying to purchase a printable gift certificate from iTunes, and I keep getting an error message that says, "Your Apple ID is not eligible to purchase gift certificates." You can purchase gift cards from retail locations. I can't do this because I live overseas. I've tried deleting and re-adding my credit card information, and I've submitted a support ticket to ask for help. I see from my Google search that this is not an uncommon error message to have, but I can't find a solution!

No, I am a US citizen living overseas, but I am going through a VPN and I am using a US-based credit card. I have no problem purchasing apps, just purchasing gift certificates. I'm going to try gifting the app to the person I am purchasing for until Apple straightens this out for me.

Why do I get an error message that the IP address of my new Airport Extreme base station is invalid?

Similar Messages

Maybe you are looking for