Why do I get "The exception Privileged instruction (0xc0000096) occured in the application" error message when exiting LabVIEW 6.1?

I have created a vi that uses the LV-GPIB and database connectivity vis. The program runs fine and it ends execution by running the "Close Database Connection.vi".
After closing out my front panel windows and exiting LabVIEW 6.1, I get an error dialog box that reads the message "The exception Privileged instruction (0xc0000096) occured in the application". What does this error mean and how do I resolve it?
Thanks,
Taf

Hi Taf,
Given the broad scope of your application, it may be best to try and isolate the problem down by taking out parts of your application and simplifying it down as much as possible until you can get a consistent version that throws this exception. I would first try to take out either the GPIB or database connectivity portions of the application to narrow down our problem. This error generally occurs when accessing DLLs and external applications, so I wouldn't be surprised if it's the GPIB or database. Let's try to see exactly which one it is and then we can dig deeper into that part of the code. Thanks for your cooperation!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

Similar Messages

  • Javac: The exception Privileged instruction, why?

    Hi,
    I apologize for posting this question twice, I'm brand new to this forum. My question is both relatedto installation and compiling (I must have done a bad installation?).
    Here is my problem:
    I just installed jdk1.1.6 on my computer.
    The examples work fine but I can't compile.
    I get 2 different errors:
    1) When I try the 1.1 example:
    D:\dev\jdk1.1.6\demo\demo\Animator\1.1>d:\dev\jdk1.1.6\bin\javac animator.java
    =>
    The exception Privileged instruction.
    (0x0000096) occured in the application at location 0x00010104
    Click Ok to terminate, Cancel to debug.
    The debug doesn't help...
    2)When I try the 1.0.2 example:
    D:\dev\jdk1.1.6\demo\demo\Animator\1.0.2>d:\dev\jdk1.1.6\bin\javac *.java
    =>
    java.lang.NullPointerException
    at java.util.Hashtable.put(Compiled Code)
    at java.util.zip.ZipFile.readCEN(Compiled Code)
    at java.util.zip.ZipFile.<init>(ZipFile.java:61)
    at java.util.zip.ZipFile.<init>(ZipFile.java:71)
    at sun.tools.java.ClassPath.<init>(Compiled Code)
    at sun.tools.javac.Main.compile(Compiled Code)
    at sun.tools.javac.Main.main(Main.java:473)
    Here is the config of my computer:
    System Information report written at: 12/05/2001 11:06:23 AM
    [System Summary]
    Item Value
    OS Name Microsoft Windows 2000 Advanced Server
    Version 5.0.2195 Service Pack 2 Build 2195
    OS Manufacturer Microsoft Corporation
    System Manufacturer IBM
    System Model 684940U
    System Type X86-based PC
    Processor x86 Family 15 Model 0 Stepping 10 GenuineIntel ~1796 Mhz
    BIOS Version 09/27/01
    Windows Directory C:\WINNT
    System Directory C:\WINNT\System32
    Boot Device \Device\Harddisk0\Partition1
    Locale United States
    Time Zone Pacific Standard Time
    Total Physical Memory 261,424 KB
    Available Physical Memory 32,368 KB
    Total Virtual Memory 893,364 KB
    Available Virtual Memory 387,436 KB
    Page File Space 631,940 KB
    Page File C:\pagefile.sys
    Please help !
    Thanks :-)
    Catherine
    [email protected]

    I am also getting same error can you please help me in this matter.
    java.lang.NullPointerException
    at java.util.Hashtable.put(Compiled Code)
    at java.util.zip.ZipFile.readCEN(Compiled Code)
    at java.util.zip.ZipFile.<init>(ZipFile.java:61)
    at java.util.zip.ZipFile.<init>(ZipFile.java:71)
    at sun.tools.java.ClassPath.<init>(Compiled Code)
    at sun.tools.javac.Main.compile(Compiled Code)
    at sun.tools.javac.Main.main(Main.java:465)

  • The exception Privileged instruction.

    Hello,
    I builded a dll which communicates with TDC card. But when I call dll from labview. It gives me the error
    The exception Privileged instruction.
    (0xc0000096) occured in the application at location 0x02e6121c.
    I have installed giveio driver.
    I am not getting where am I geeting wrong. Can somebody help me out.
    Regards,
    Maithili

    Maithili,
    It very much sounds like the error is in the DLL that you built. I assume that you have tested it outside of LabVIEW?
    Do you know exactly where the error is happening? You should set a breakpoint on the Call Library Function node and if the error happens before then, then the error is in LabVIEW. If the error happens during the Call Library Function, then the error is in the DLL itself. From there, you can print information from your DLL as you go to see where the crash is happening or use the information in the "Using External Code in LabVIEW" manual that is on your PC in the manuals directory under your LabVIEW directory.
    With no files (and no hardware to test if I had), I cannot offer any more advice. If you can do a little more digging or post a
    more detailed explaination of your issue, then the community can take another look.
    Randy Hoskin
    Applications Engineer
    National Instruments
    http://ww.ni.com/ask

  • The exception Privileged instruction. (0xc0000096)

    Hey All,
    I don't normally post but this problem frustrated me. I'm running Windows 2003 Server (SP1 with most recent patches). Everything was running fine until I installed the newest Itunes version (6.0.5). Got an error message when Quicktime finished it's installation. When I tried to open Itunes, I received this message:
    The exception Privileged instruction. (0xc0000096) occurred in the application at location 0x7ca2af84.
    The problem lies in the new version of Quicktime. Apple support wouldn't help me because win 2k3 server is not a supported OS. So, after reading some posts and playing around with some things, I came across the simple solution. Itunes 6.0.5 requires the same version (or greater) of Quick time as did 6.0.4. So...rollback to the previous version of Quicktime and your problems should be solved. Here are the quick and easy steps:
    1- Install new version of Itunes and Quicktime
    2- Uninstall Quicktime. If the usual Uninstall methods don't work, use the following method (DO NOT UNISTALL ITUNES OR ANY IPOD RELATED FILES) (thanks to b noir in a previous post).
    a- download and install the MS Windows Installer Cleanup util (http://support.microsoft.com/kb/290301/). Remove Quicktime Component.
    b- follow steps in this article to remove the remaining files (http://docs.info.apple.com/article.html?artnum=93976)
    3- download and install Quicktime 7.0.3 (http://appldnld.m7z.net/qtinstall.info.apple.com/tramper/us/win/QuickTimeInstall er.exe)
    Everything should be working from this point forward.
    PC   Other OS   Win 2k3 Server (SP1)

    Excellent - thanks michaeld1313, works a treat!
    PC   Other OS   Win 2k3 Server (SP1)

  • Getting "close -ShellExtLoader application" error message when installing PsCC or AiCC.

    Getting "close -ShellExtLoader application" error message when installing PsCC or AiCC.

    Hi Olegchursin,
    Please refer the KB : http://helpx.adobe.com/x-productkb/global/error-close-following-applications-continue.html
    "Close SugarSync if the application displayed is ShellExtLoader."

  • Get error message when exiting premier Pro wont save file

    I am getting an error message when I exit adobe premier pro it wont save the file and the program locks up. I even uninstalled an reloaded the program CS5.5 vrs. still get the same error can anyone help?

    You have not provided any system information or other technical details, so we can't know anything. Either way, ask in the Premiere Pro forum.
    Mylenium

  • I get an Application Error message when installing TestStand 2.0

    When installing TestStand 2.0 on a Windows NT 4.0 Workstation, following message appears when installing Engine: Application Error - The instruction at "0x685876b3" referenced memory at "0x685876b3". The memory could not be read.

    Hello Eduardo,
    This is a strange behavior, and I guess I have a couple of comments. TestStand works fine with Windows NT 4.0 but it needs at least Service Pack 3 installed. So make sure you have the SP installed.
    In addition, make sure you use an administrator account when you install TestStand. Finally, you can try to install it on a different computer with the same OS just to make sure the CD is OK. If it works in the other computer, then there is something wrong with the original PC.
    Regards,
    Roberto Piacentini
    Applications Engineer
    National Instruments
    www.ni.com/support

  • NsAppShell:Event Window:firefox.exe-Application Error message when shutting down Firefox, how do I get rid of this error message?

    I click to exit Firefox and the above error message & below this error message it says the following:
    The instruction at 0x776fe144 referenced memory at 0xfffffffff. The memory could not be read. Click on OK to terminate the program.
    The only change I have made recently was to upgrade to the current Firefox version 30.0, the above message showed up after the upgrade.

    Your System Details
    Installed Plug-ins
    Shockwave Flash 14.0 r0
    Shockwave Flash 12.0 r0
    Shockwave Flash 11.9 r900
    Having more than one version of a program may cause issues.

  • Why do I get a stall every few minutes with a "Pages unresponsive" error frame when using iCloud e-Mail?

    Friends:  Has anyone heard or seen a suggestion from any source on how to eliminate the several minute stall every several minutes when using iCloud E-Mail through any browser (Safari, IE-11, Chrome) on any Microsoft OS (WIN-8.1, WIN-7-SP1, WIN-XP)?  I've seen several other folks express frustration but have seen no actionable replies.
    Thanks,  George

    Absolutely no one posted a reply or suggestion in over a month.  Not even one.  So, I'm abandoning this query.
    If someone in posterity sees this post, please don't reply because it will not be monitored.
    Thanks anyway - GeorgeIP

  • Javac - exception Privileged instruction

    Hi,
    I just installed jdk1.1.6 on my computer.
    The examples work fine but I can't compile.
    I get 2 different errors:
    1) When I try the 1.1 example:
    D:\dev\jdk1.1.6\demo\demo\Animator\1.1>d:\dev\jdk1.1.6\bin\javac animator.java
    =>
    The exception Privileged instruction.
    (0x0000096) occured in the application at location 0x00010104
    Click Ok to terminate, Cancel to debug.
    The debug doesn't help...
    2)When I try the 1.0.2 example:
    D:\dev\jdk1.1.6\demo\demo\Animator\1.0.2>d:\dev\jdk1.1.6\bin\javac *.java
    =>
    java.lang.NullPointerException
    at java.util.Hashtable.put(Compiled Code)
    at java.util.zip.ZipFile.readCEN(Compiled Code)
    at java.util.zip.ZipFile.<init>(ZipFile.java:61)
    at java.util.zip.ZipFile.<init>(ZipFile.java:71)
    at sun.tools.java.ClassPath.<init>(Compiled Code)
    at sun.tools.javac.Main.compile(Compiled Code)
    at sun.tools.javac.Main.main(Main.java:473)
    Here is the config of my computer:
    System Information report written at: 12/05/2001 11:06:23 AM
    [System Summary]
    Item     Value
    OS Name     Microsoft Windows 2000 Advanced Server
    Version     5.0.2195 Service Pack 2 Build 2195
    OS Manufacturer     Microsoft Corporation
    System Manufacturer     IBM
    System Model     684940U
    System Type     X86-based PC
    Processor     x86 Family 15 Model 0 Stepping 10 GenuineIntel ~1796 Mhz
    BIOS Version     09/27/01
    Windows Directory     C:\WINNT
    System Directory     C:\WINNT\System32
    Boot Device     \Device\Harddisk0\Partition1
    Locale     United States
    Time Zone     Pacific Standard Time
    Total Physical Memory     261,424 KB
    Available Physical Memory     32,368 KB
    Total Virtual Memory     893,364 KB
    Available Virtual Memory     387,436 KB
    Page File Space     631,940 KB
    Page File     C:\pagefile.sys
    Please help !
    Thanks :-)
    Catherine

    You can also reply to me using this address:
    [email protected]
    Thanks !!!!! :-)
    Catherine

  • I get an error message when i am downloading Itunes. It's the Apple mobile Device. It fails to start because i don't have sufficient privileges. What does that mean?

    What do i have to do to get sufficent privileges?

    Why does the title says "I get an error message when downloading Itunes" when you clearly do not?  The issue has nothing to do with downloading but rather installing of iTunes which is a seperate step.
    Maybe if a search is performed for the real issue then a resolution will be found.

  • Just recently getting error message when downloading podcasts.  Says "The iTunes Library file cannot be save.  You do not have enough access privileges for this operation."  Doesn't happen every time.  Using Windows 7.  What can I do?

    Just recently getting error message when downloading podcasts.  Says "The iTunes Library file cannot be save.  You do not have enough access privileges for this operation."  Doesn't happen every time.  Using Windows 7.  What can I do?  The files seem to be there but I don't know if they are being backed up to cloud.

    Hi, DickmoAZ.  
    Thank you for visiting Apple Support Communities.
    This sounds like a permission issue most likely with the iTunes Media folder.  Here is an article that will help you troubleshoot this issue.
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/ts1277
    Cheers,
    Jason H.

  • My iPhone 5 charger stopped working. It's under warranty and I want to send it back. How do I initiate that process? The website keeps sending me in circles.  I'm getting an error message when I put in my serial number.  Why is this so difficult?

    My iPhone 5 charger stopped working. It's under warranty and I want to send it back. How do I initiate that process? The website keeps sending me in circles.  I'm getting an error message when I put in my serial number.  Why is this so difficult?

    If posible you will find visiting a store by far the simplest way of getting a solution
    Which Country
    are you in ?
    Have you checked the lightning socket on iPhone doesn't have lint or fluff in it
    solves majority of such issues

  • Why do I get this error message when I open Organizer in Photoshop Elements 11 "Elements Organizer has stopped working"? My only option is to Close Program so I am effectively locked out of my photo catalogue.  I have reinstalled the program to no avail.

    Why do I get this error message when I open Organizer in Photoshop Elements 11 "Elements Organizer has stopped working"? My only option is to Close Program so I am effectively locked out of my photo catalogue. I have tried reinstalling the program but it made no difference to the error message.
    Could someone help please?  Steph

    Hi,
    Please give a try to Photoshop Elements (PSE) knowledge base. steps mentioned on this and see if it works.
    Regards
    Kishan

  • Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

    Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

    Try the troubleshooting tips here:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
    You may have something in your project on one of the slides that is tripping up the publishing process.

Maybe you are looking for