Why does exporting .mov with Nero have no sound?

I recently bought a Kodak Digital and as you know it produces a .mov file when using the movie feature. It plays fine when using Quicktime. I use Nero Express 3 to create a DVD of my photos. When I export the .mov file or when I transcode to DVD format the Video will complete but playback has no Audio. Do I need an additional codec? Does anyone know how to solve this problem so I can use Nero and watch my DVD with sound?
  Windows XP  
  Windows XP  

Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article.
2. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
3. If your model has an audio-out (headphone) port, and a red light is coming from it, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
4. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Reboot and test.
5. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
6. Reset the NVRAM.
7. Reset the SMC.
8. Reinstall OS X after backing up all data. For a possible shortcut, see this thread.
9. Make a "Genius" appointment at an Apple Store.

Similar Messages

  • Basic Question: why does exporting Movie take so long?

    I import an hour long H264 640x480 movie into imovie. It takes about eight minutes.
    I then add a few chapter markers. That's all I need to do.
    Then I export as a large movie, also H264. It takes four hours.
    So why does it take so long, as it is the same format? Is it just because the size is a a little different? Is there any way to export the movie at the same size as it was originally? Then would it export more quickly?
    Thanks.

    TimK wrote:
    … What is a res?
    I assumed that imovie did support h264, as up to now it has been exporting all my movies as h264 by default.
    ooops, sorry: res=resolution
    iM is meant for Camcorder imports - those trigger the import routines: .dv gets 'cloned' into Events, HDef gets converted into the AppleIntermediateCodec ... which offers the two (three) standards 1920x1080, (1440x1080/anamorph for HDV/'HDef on tape' sources) and 1280x720 ...
    The EXPORT codec h.264 isn't meant for editing, but optimized for playback and file-size.
    technically, a AVCHD/mts IS h.264
    but to avoid technical probs, Apple prefers to transode into intermediates, aic.mov for consumer editor, proRes for FCPX ....
    there's playback-codecs and edit-codecs ... for instance, playback-codecs (mp2, h264, Sorenson, VP6 etc) do not store every frame ( ! ) to reduce file-size; now, you like to edit with frame precision ... what shall happen?
    an edit-codec contains any solid frame ... = file-size mucho bigger ...

  • Why does my new macbook pro have no sound?

    Suddenly my macbook pro lost all sound. the mute is off and the volume is all the way up. I don't understand. Can anyone help?

    Take each of the following steps that you haven't already tried.
    1. Start with the steps recommended in this support article.
    2. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
    3. If your model has an audio-out (headphone) port, and a red light is coming from it, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    4. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Reboot and test.
    5. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    6. Reset the NVRAM.
    7. Reset the SMC.
    8. Reinstall OS X after backing up all data. For a possible shortcut, see this thread.
    9. Make a "Genius" appointment at an Apple Store.

  • Why does my ipad mini not have any sound?

    My ipad mini does not have sound in any of my apps (mostly games). Sound is on in settings, and sound is turned on in each app. It is a first generation mini, not a retina display. Thanks for any suggestions.

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.

  • Why when I move a midi event in the piano roll the film does not move with this event?

    LOGIC X 10.0.3. Why when I move a midi event in the piano roll the film does not move with this event?

    Film? Have you dropped a movie file into your Logic project as well? You need to be a little clearer.

  • While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark?  I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed.  Can someone help me?

    While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark?  I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed.  Can someone help me?

    It's right at an hour (consistently), but the computer goes to sleep prior to that. It's as if iTunes goes to sleep. Also, it wasn't always this way. Originally, the movies played through without interruption. At some point, I guess a setting was changed, and now I only get an hour. Also. My energy settings are set to go to sleep at 10 minutes.

  • Why does LabVIEW allow me to have 2 controls with same name

    Here's a general LabVIEW question:
    Why does LabVIEW allow me to have 2 controls with the same name in the same VI?  It seems like this only increases the chances of confusion.  Especially when someone is just looking at a block diagram (or documentation of a block diagram).
    No other programming language that I know of allows this.  I realize that uniqueness of name is not as critical in LabVIEW as it is in any text based language.  For example, in a text based language, if I had 2 variables called abc and I wrote a statement
    abc = 12;
    the compiler would not know which abc was being referred to.  In LabVIEW, if we had 2 controls called abc, the equivalent of doing an abc=12 is writing to a local variable (which is always linked to one of the controls) and there is no ambiguity.  Still, someone looking at the code cannot figure out which abc is linked to unless he does a right click>>Find>>terminal (or a double click).
    Even though I have never and never will name 2 controls the same, I think it would be a nice constraint to see enforced by LabVIEW.
    Any input from NI engineers on this?
    Message Edited by S G on 12-18-2007 03:38 PM
    S G
    Certified LabVIEW Architect, Certified TestStand Developer, Certified Professional Instructor
    Attachments:
    Trial1.JPG ‏21 KB

    I know when you copy and paste a control or indicator, LabVIEW automatically increments the label. But since you can hide the label, and show or hide the caption, there must be another mechanism that LabVIEW uses to keep track of all the controls. I thought I remember back in the "old days" (ver 6 or 6i) LabVIEW would give you an error if you tried to make two controls with the same name. Perhaps that was LabWindows/CVI.
    I don't know where the index is actually stored, but if you look at a property node linked to the Pane, you will see an array of references to the controls and indicators. Since the references are stored in an array, I assume that any local variables are tied to the index of that array. Since the labels themselves are properties of the control, I guess there's no reason to limit what that label is. They all have a unique index number.
    Interestingly, this array of references grows from the beginning. That is, any new control or indicator is put at index 0, not the end of the array.
    B-)
    Message Edited by LabViewGuruWannabe on 12-18-2007 08:45 PM
    Attachments:
    Labels.png ‏12 KB

  • Why does my iMac (with Mountain Lion) no longer recognize my external hard drive I have used as a back up via Time Machine after the hard drive was accidentally unplugged?

    Why does my iMac (with Mountain Lion) no longer recognize my external hard drive I have used as a back up via Time Machine after the hard drive was accidentally unplugged?

    Do you mean the external hard drive is not mounted on the iMac desktop?
    Check if Disk Utility sees the drive. Applications / Utilities / Disk Utility. If the external shows up in the left column, select it and click on Mount.
    If it does show up this way, I recommend using DU to Repair Disk.

  • Why does my iPhone 4 not have the panorama feature with the new iOS 6 ?

    Why does my iPhone 4 not have the panorama feature with the new iOS 6 ? Can someone please explain this to me. I was already excited about it.

    That was made available in iOS 5. To update, you may need to connect to iTunes

  • Why does the iPad Mini not have music play count?

    I bought an iPad Mini and also have a macbook. I had listened to various music on my iPad Mini the other day, however when I connected the iPad Mini to the Macbook and iTunes via the lightning connector to sync, it synced the ratings I gave the songs I listened to on the mini, but no play count, as if I had not listened to anything. I hope there is something I can do about this as I often look at my play count!!

    Katrina UK
    It should work work but these kind of bugs pop up between updates, both hardware and software. Try closing all apps in the recently used list on the iPad. Double tap the Home button, tap and hold one of the icons at the bottom till they wiggle then tap the to close them. Tap the Home button to get back to the Home screen then hold the sleep button till you see the slide to power off message. Once it has powered down completely hold the Sleep button till the Apple icon appears.
    tomyiiii
    Re: Why does the iPad Mini not have music play count? 
    Nov 18, 2012 11:34 AM (in response to Katrina UK)
    Does it even really matter...?
    Many people including myself rely on playcounts to control smart playlist to manage large libraries. Smart playlists can be created to show your most or least played tracks and used more or less as your favorites or other uses. Along with playcounts the date is transferred so to keep a fresh list of music on my smaller iPods a smart playlist set to songs not played in the last month keeps some fresh tunes on it.
    Playcounts are also used to manage Podcasts in iTunes to delete older episode. Bookmarks, which can also be effected by this, can mess up audiobooks, movies and podcast playback between different devices. So yes, it does matter.

  • HT1657 why does every movie I download stops half way and says err=-50/err=-39?

    Why does every movie I download stop half way and say err=-50/err-39? I also have internet connection that is really good and it keeps saying to check that

    Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • HT1600 Why does a movie on my computer take an hour to download to AppleTV?

    Why does a movie on my computer take an hour and more to download to AppleTV?

    You keep changing the subject without closure, however if you did enter the correct password and it wasn't accepted, it was most likely the result of a networking issue with your network and nothing to do with whether or not the Apple TV is intuitive or not.
    I found some movies that I purchased were still on the "cloud".
    Yes, that's how it is supposed to work, movies purchased from the iTunes Store are always available through the 'Movie' feature.

  • Why does my App store just have question marks where pictures should be?

    Why does my App Store just have question Marks where the picture of the app should be

    When you log in with a new device, Apple asks security questions and will email you to make sure it is not an unauthorized access to your account.
    We are not Apple support, we are a forum of fellow users.
    You can change your information anytime in your iTunes account.
    http://support.apple.com/kb/HT5312

  • HT3209 why does my movie rental download stop and reload just before it completes the download. I've tried 4 times now after waiting hours for the download. Ugh!

    why does my movie rental download stop and reload just before it completes the download. I've tried 4 times now after waiting hours for the download. Ugh!

    This Apple article might help ya out -> iTunes Store: "Error (-50)" when downloading purchased content
    Try following along with the article and deleting the cached downloads, then try again.

  • HELP - hi with apple Configurator why does it show with a yellow triangle on the right side of the screen what am i doing wrong for the ipads not syncing or whatever and how do i fix that?

    HELP -- hi with apple Configurator why does it show with a yellow triangle on the right side of the screen what am i doing wrong for the ipads not syncing or whatever and how do i fix that? although i have looked online to try and figure it out and here is the website i found is this the stuff i need to do to fix this? is this site what i need to do to fix this? http://edtechstandish.wordpress.com/what-ive-learned-about-apple-configurator-so -far/  Thanks

    Sorry but I don't know anything about this.  But you might have better luck posting this question over ing the iPad in Business and Education forum here: https://discussions.apple.com/community/ipad/ipad_in_business_and_education?view =discussions.

Maybe you are looking for