Why does my ipod have on the screen the itunes symbol and the cord and an arrow pointing to the itunes symbol? I can't get it to do anything.
Why does my ipod have on its screen the itunes symbol and the cord with an arrow pointing to the itunes symbol. I can't do anything with my ipod now!
Plug it into iTunes. If that does not work hold the power and home button untill the screen turns off then let go of the power button but KEEP holding the home button... this should bypass the connect to iTunes screen. Hope it helps.
Similar Messages
-
Why does my ipod have a white screen?
I was out with mt mates on a hot day, when i took out my ipod to plug into the speakers, i had a white screen and i can't do anything about it
This happens when it has water damage
-
Why does my 3GS have a white screen sometimes, and I have to lock the screen for it to go back to lock screen? Sometimes I have to attempt the lock screen several times, and it still doesn't work. I, then, attempt to restart it by powering it down, and the lock screen will appear again. The display goes out sometimes while I am on a call, and I can't hang up. I have to go through this hole process over and over again.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first... -
Ipod touch 4th gen was accidentally disconnected from laptop during update process. Now permanent screen pic is of the power cord w/ an arrow pointing up to itunes symbol. Holding the ctr & power buttons together for 6-10 sec causes apple pic to briefly appear and power cord/itunes pic reappears. Powering off and on has same effect. Attempting to reset.
It sounds like the iPod touch is in Recovery Mode, Try to restore it from iTunes again.
If you run into an error when restoring the iPhone again, take a look at this Apple doc -> iOS: Resolving update and restore alert messages -
my ipod is a older generation...when i turn it on the screen popps up with a usb cord and the itunes logo.which i assume means it needs to be linked...my issue it wont link
What happens when yo connect to computer and restore via iTunes
iTunes: Restoring iOS software -
i turned my ipod off while it was udating the software (oops) now all it shows on the screen is a picture of the cord with an arrow pointing up to itunes. please help.
What happens when your connect the iOS device to your computer and restore via iTunes.
Try DFU mode and then restore if necessary.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software -
I've plugged it into the computer and nothing happens...nothing changes....the screen still has a pic of the computer charging cord with an arrow pointing to a music symbol at the top of the screen. I can't seem to get it to do anything.
For how to restore see:
iTunes: Restoring iOS software
Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I recently did an update and now my iPad is stuck showing the cord with an arrow pointing to the iTunes icon. It won't let me clear this screen. What do I do to fix it?
Well, that illustration is suggesting you plug your iPad into iTunes (current version: 11.0.2).
Have you tried that? -
I attempted to update to latest version of IOS. Now all I get on the display is a graphic of the power cord with an arrow pointing to an iTunes icon. Ipad does not seem to power down or power up correctly. Home button is not responding.
I am new to this, could you provide me with a little more detail on how to do this? Thanks so much!
-
Why does my music have a red circle with a square dot beside it and how do i remove it
why does my music have a red circle with a square dot beside it
Here's what I had to do, no thanks to the others on here who go at it like Apple, delete and restore.
No, you don't have to delete and restore. Just open a folder on your computer, call it something like iPad music, keep it open, open iTunes, select all your music, copy and paste it in the folder you just created, delete all your music from iTunes (relax, you just copied it into that folder). Select all the music in that folder, drop it back onto your playlist. Now, I renamed my playlist, because it was called untitled, originally, so if that doesn't work, rename, or delete and recreate your playlist, copy the music back over, sync, and they will play.
Worked for me, anyhow. Good luck!
<Edited by Host> -
My iPad is. "Frozen"... Graphic of charger cord connector with an arrow pointing to the iTunes logo. This happened when I was updating iOS software.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
Why does my ipod have lines throw it?
i got my screen fixed on my ipod 4th gen and ever since it has lines throw it and a part of the screen wont work can you all help?
thanksthanks ill go 2 them 2 morrow but if they dont fix it will apple do anything
-
Why does my ipod have lines threw it
help my ipod has colourfull lines threw it when i tried to open an app what do i do?
Try the standard fixes to rule out a software proble:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore the iPod from backup
- Restore the iPod to factory defaults/new iPod
If you still have the problem it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
This is very frustrating. Like three months ago my ipod touch, 5th generation, just turns off out of no where. It will be charged and working fine but then the screen goes completely black and I can't turn it on. But then after like a day or so it turns back on and works until it decides to shut off again. And the cycle repeats. I'm scared its going to break for good.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still reoccurs, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Can anyone PLEASE help me!!? I didn't realize that would be my title so, bear with me hear and read the title!!^^
The screen is telling you to connect the iPod to your computer and restore via iTunes. What happens when you do that?
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad
Maybe you are looking for
-
MacBook Air Freezes at 50% when booting
Hi, Sorry if this is posted in the wrong spot. I'm new to the Apple Support forums (well, new to online forums in general). I have a newer MacBook Air that has very recently started to freeze periodically (spinning wheel), and now freezes while booti
-
Good morning When I run expdp I got this error. My first expdp was fine but the second expdp I got the next error: Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE ORA-39171: Job is experiencing a resumable wait. ORA-01691: unable to extend
-
Hi, I have implemented reading an XML feed in a Java program using informa api. In NWDS, I created a Java Project. And as required added 3 externals jar files. I had to import the following: import de.nava.informa.core.ChannelIF; import de.nava.infor
-
I can only start my PB off the install disk (it's a copy and I'm not sure if it's a copy of the exact disk that came with the machine) and it does not see the internal hard drive. When started in Target Disk mode other computers see the hard drive. I
-
Leopard - M.I.A. Printers on Wireless IP and Flashpaper?
Hi folks, The only main glitch so far with my upgrade from Tiger to Leopard 10.5.2 is my printer situation. Before, my system saw my printer on the wireless router system by default (a Xerox 6200DP) and its IP address. Now, I'm having as much trouble