Why doesn't voice or sound work when in a moving vehicle?

When I am in a moving vehicle nothing voice activated works.  Also I can get no sounds.

Hi BobM1234,
If you are having issues using Siri you may want to troubleshoot using the steps in this article -
iOS: Troubleshooting Siri
http://support.apple.com/kb/TS4079
Thanks for using Apple Support Communities.
Best,
Brett L

Similar Messages

  • Why doesn't my 4s sound work

    My iPhone 4s sound only works when my phone is locked 10% of the time the other 90% I have no sound nothing works and the volume button won't show a sound bar increase when I press either one.

    its only when i unlock the iphone...the rest of the sounds is normal..any suggestion..?

  • Why doesn't outgoing email sound work?

    A while back I had this same problem...the outgoing email sound didn't work. So I did this: Applications>Utilities>Audio Midi Setup>Built-in Output>Output> Changed the output to 2ch - 32bit Float (was originally: 2ch-24 bit integer). Then the sound worked fine. Today, once again, the same problem has recurred. Additionally, now when I increase or decrease the sound from the keyboard, there is no "bleeping" sound with each increase or decrease change. There is sound when I watch a video, etc. I went to Audio Midi Setup and tried changing back to 2ch-24 bit integer, but that didn't help. I did try rebooting with 2ch-32 bit Float as well as with 2ch-24bit integer...didn't help. Any suggestions?

    You don't give us anything like enough data to go on. What is your operating system? Do you have a functioning iCloud account - i.e. are you signed in in System Preferences>iCloud?
    Were you originally a MobileMe subscriber? If so, did you migrate to iCloud?
    Was your email still working recently? Do you get any error messages? What happens when you try to use it?
    Have you been using an @icloud.com address or an @me.com address?
    (Please do not post your email address when answering.)

  • Why doesn't my trash sound works anymore?

    Hi all...
    Can anyone tell me how to turn back the sound of the trash bin or sound after transferring a data to hard drive in macbook?
    U know, there's always that sound whenever u copy data to somewhere else, or you delete your data..mine doesn't have that anymore =(
    can anyone explain why and how to fix it?
    Thank YOU!!

    System Preferences > Sound > Sound Effects tab > check box for "Play user interface sound effects". Make sure also to choose "Selected sound output device" from the "Play sound effects through..." menu.

  • Why doesn't my card reader work when I take it from the camera and put it in the reader? Nothing happens and it doesn't show up in finder.

    When I put my card into the reader, nothing happens. It doesn't show up in finder so I can't dismount it. The pictures on it aren't readeable all of a sudden, except for two of them, and that's all that would download to iphoto, but I had to connect the camera since the card reader doesn't resond.

    Hi bricknut dab,
    Welcome to the Support Communities!  Are you asking about the SD slot on your Mac, or is this an external card reader plugged into a USB port?  If it is the one on your Mac, the article below may be helpful.  Did you try more than one SD card?  You can use Disc Utility to erase and reformat the card if needed.
    About the SD and SDXC card slot
    http://support.apple.com/kb/ht3553
    I put the card in the slot, but it did not mount.  What should I do?
    Remove the card and insert it again. Sometimes, if you put the SD card into the slot too slowly, it may not mount properly.
    Can I reformat an SD card with Disk Utility?
    Yes. Using Disk Utility, you can partition and format an SD device as FAT32 (using the MS-DOS FAT setting) or Mac OS Extended. The Mac OS Extended format can only be used on Macintosh systems. Cards formatted to Mac OS Extended will not be recognized by non-Apple systems. Formatting cards larger than 32GB for use with digital cameras, GPS, and other devices may require formatting them with the exFAT file system. When in doubt, format the cards in the device you intend to use with the card.
    Cheers,
    - Judy

  • Why doesn't my apple id work when trying download an app?

    I can log into Apple support using my Apple ID, but when I try to download an App I get an error message, soemthing like a time out.
    What's wrong?

    Hi Ken ...
    Try resetting your Apple ID password >  Apple - My Apple ID

  • Why doesn't my apple ID work when I try to download apps?

    I have an apple ID but when I go into the app store and download free apps, a notification pops up ad says "this apple ID has not been used in ITunes yet"
    Please help me figure out what's going on

    Have you tried using it in iTunes?

  • Why doesn,t  my mail iccon work?

    Why doesn't my mail icon work?

    If you moved Mail out of the Applications folder, then applied the security update, Mail has been disabled.
    It must stay protected in the Applications folder, or you risk the possibility that malware might change it and use it to send spam.
    Mac OS X v10.6: "You can't use this version of Mail…" alert after installing Security Update 2012-004

  • In my wife's window, the sound works, when I switch over to my window the sound doesn't work.  I noticed the problem when I went to a YouTube video.  How do I correct this?

    In my wife's window, the sound works, when I switch over to my window the sound doesn't work.  I noticed the problem when I went to a YouTube video.  How do I correct this?

    Hello Kiira Doon,
    The troubleshooting steps detailed below may help get your iPhone's display to function.
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    My issue is still not resolved. What do I do next?Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • Why Doesn't the XIRR function work?

    In Excel if you have 5 records from a1:b5 then XIRR looks like this:
    XIRR(A1:A5, B1:B5) you get a nice neat answer like .35
    Here is a version that works in Crystal that would require manual entry of any new quarters numbers and dates-- and if you plug this into Crystal it works:
    (XIRR([1000000,-100000,-100000,-100000,-100000,10277.49,-100000], [DateValue(1999,2,1),DateValue(1999,3,1),DateValue(1999,6,1), DateValue(1999,12,1),DateValue(2000,3,1),DateValue(2000,6,1),DateValue(2000,9,1)]))*.100
    You do get a nice answer of something like .035.  But this is all done manually and I need it to function automatically when the report is refreshed.
    So you have a range for the currency and a range for the date fields. I need to simulate this in crystal. Crystal has an XIRR function, and with the arrays, I should be able to fill in the range, but am having difficulty getting it to work.
    After building the arrays, I made another formula to combine the arrays in the XIRR formula.
    I am down to this error now after getting this formula this far  --
    "Numerical method did not converge; try another value for guess."
    Here's where I am with the formula, although they don't want to use the guess part of the XIRR function - they just want to use the XIRR(number/currency, date).  Maybe you could pass this on too?:
    /{@Reset} for the group header (NOT using a repeated group header):
    whileprintingrecords;
    numbervar array x := 0;
    datevar array y := date(0,0,0);
    numbervar i := 0;
    numbervar j := 0;
    //{@accum} for the detail section:
    whileprintingrecords;
    numbervar array x;
    datevar array y;
    numbervar i := i + 1;
    numbervar j := count({table.groupfield},{table.groupfield});
    if i <= j then (
    redim preserve x[j];
    redim preserve y[j];
    x<i> := tonumber({table.currency});
    y<i> := datevalue({table.datetime})
    //{@xirr calc} to be placed in the group footer:
    whileprintingrecords;
    numbervar array x;
    datevar array y;
    xirr(x,y)
    The array works correctly.  So why do I get that error and why doesn't the XIRR formula work like they say it should?  Has anyone used this successfully in Crystal--maybe you could shed some light?
    Thanks!

    Hi,
    I am receiving that same error when the last item in the array is 0, otherwise all works perfectly.
    When I run the same group of numbers and dates in Excel it returns without issue.
    -265500.00,-690000.00,-570000.00,16814.25,-855000.00,-619500.00,55293.46,30411.40,15183.76,  0.00
    01-25-2007,03-06-2007,05-02-2007,06-29-2007,08-01-2007,08-24-2007,09-17-2007,03-14-2008,05-28-2008,03-31-2010
    =XIRR(A2:J2,A1:J1,-0.1)
    Is there a known bug in Crystal's XIRR function when the last value is 0? 
    Or a hot-fix that will repair this?
    Thanks in advance,
    Gary
    PS. I am using Crystal XI Product Version: 11.0.0.2495

  • My sound has recently gone on my Iphone4s, this only happens when I use my phone myself. The sound works when I receive calls and texts but I am unable to watch videos, listen to music etc it seems like my volume button has gone! Can anyone help??

    My sound has recently gone on my iphone4s, this only happens when I use my phone myself. The sound works when i receive a call or a message etc but I am unable to watch videos or play music, the sound also doesn't work on games. Please can anyone help with this issue or let me know how to fix it if experienced the same problem?

    Remove all apps from multitasking bar. Double click Home button then tap and hold an icon and tap on little x on every app. Then reset. Hold down Home and Power button until Apple logo appears.

  • Why doesn't my VGA adapter work to connect my iPad2 to my projector. I haven't had any problems in the past?

    Why doesn't my VGA adapter work to connect my iPad2 to my projector. I haven't had any problems in the past?

    Hey MarieF-D,
    Thanks for the question. The following article provides basic troubleshooting steps that may help to resolve your issue:
    iOS: About Apple Digital AV Adapters
    http://support.apple.com/kb/HT4108
    Troubleshooting
    If you encounter an issue using the Apple Digital AV Adapter or VGA Adapter:
    Disconnect and reconnect the adapter from the iOS device and display.
    Connect directly to the TV, projector, or external display using a known-good VGA or HDMI cable.
    Remove any VGA or HDMI extension cables or converters.
    Note that accessories that convert a VGA or HDMI signal to other video formats (DVI, Composite, Component) are not supported.
    Ensure that you are using the latest version of iOS. Some Apple Digital AV Adapters require iOS 5.1 or later.
    Note: When using an Apple Digital AV Adapter manufactured before early 2012 with iPad (3rd generation), you may see the "This accessory is not supported" alert. Dismissing the alert will allow you to use the adapter.
    For optimal performance, you may need to adjust the video resolution or settings for your display. If your display offers an "auto detect" or "factory default" setting, you may be able to use these options to optimize video resolution and display.
    Thanks,
    Matt M.

  • My iphone 4 the vibrate has stopped working and the txt tone wont work even tho it says its got a tune and when i go to turn it up on side buttons it say (headfones) but they arent plugged in, but the sound works when someone rings me???

    my iphone 4 the vibrate has stopped working and the txt tone wont work even tho it says its got a tune and when i go to turn it up on side buttons it say (headfones) but they arent plugged in, but the sound works when someone rings me???

    ATtempt to power off your device and power it back on, if that doesn't work reset all settings should resolve it for you

  • Why doesn't my email address work for apps

    Why doesn't my email address work on my envy printer?

    You don't give us anything like enough data to go on. What is your operating system? Do you have a functioning iCloud account - i.e. are you signed in in System Preferences>iCloud?
    Were you originally a MobileMe subscriber? If so, did you migrate to iCloud?
    Was your email still working recently? Do you get any error messages? What happens when you try to use it?
    Have you been using an @icloud.com address or an @me.com address?
    (Please do not post your email address when answering.)

  • IPad sound works when only earphones is plug on

    I used earphones just now, when I took it out the speaker was working fine. When I got home the speaker is not working anymore. I tried out the volume button and the side of the iPad and it says headphones when no earphones or headphones is plug in. And the sound works when I plug my earphones in. Help me please!!

    Make sure that there is no debris in the headphone opening on the iPad. Try plugging your headphones in and out a couple of times as well. If still no luck, reboot the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    if that doesn't work, You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.

Maybe you are looking for